summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-02mfd: sc27xx: Use SoC compatible string for PMIC devicesBaolin Wang
We should use SoC compatible string in stead of wildcard string for PMIC child devices. Fixes: 0419a75b1808 (arm64: dts: sprd: Remove wildcard compatible string) Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-02mfd: twl-core: Disable IRQ while suspendedAndreas Kemnade
Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get() in i2c-omap.c returns -EACCES. [ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug) [ 86.555572] Disabling non-boot CPUs ... [ 86.555664] Successfully put all powerdomains to target state [ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563751] twl4030: I2C error -13 reading PIH ISR [ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563812] twl4030: I2C error -13 reading PIH ISR [ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1) [ 86.563903] twl4030: I2C error -13 reading PIH ISR This happens when we wakeup via something behing twl4030 (powerbutton or rtc alarm). This goes on for minutes until the system is finally resumed. Disable the irq on suspend and enable it on resume to avoid having i2c access problems when the irq registers are checked. Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-02drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()Dan Carpenter
We don't want to overwrite "ret", it already holds the correct error code. The "regmap" variable might be a valid pointer as this point. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-04-01dccp: Fix memleak in __feat_register_spYueHaibing
If dccp_feat_push_change fails, we forget free the mem which is alloced by kmemdup in dccp_feat_clone_sp_val. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e8ef967a54f4 ("dccp: Registration routines for changing feature values") Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01sctp: initialize _pad of sockaddr_in before copying to user memoryXin Long
Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Tested-by: Alexander Potapenko <glider@google.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'nfp-flower-fix-matching-and-pushing-vlan-CFI-bit'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fix matching and pushing vlan CFI bit This patch clears up some confusion around the meaning of bit 12 for FW messages related to VLAN and flower offload. Pieter says: It fixes issues with matching, pushing and popping vlan tags. We replace the vlan CFI bit with a vlan present bit that indicates the presence of a vlan tag. We also no longer set the CFI when pushing vlan tags. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: remove vlan CFI bit from push vlan actionPieter Jansen van Vuuren
We no longer set CFI when pushing vlan tags, therefore we remove the CFI bit from push vlan. Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01nfp: flower: replace CFI with vlan presentPieter Jansen van Vuuren
Replace vlan CFI bit with a vlan present bit that indicates the presence of a vlan tag. Previously the driver incorrectly assumed that an vlan id of 0 is not matchable, therefore we indicate vlan presence with a vlan present bit. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01kcm: switch order of device registration to fix a crashJiri Slaby
When kcm is loaded while many processes try to create a KCM socket, a crash occurs: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e IP: mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 PGD 8000000016ef2067 P4D 8000000016ef2067 PUD 3d6e9067 PMD 0 Oops: 0002 [#1] SMP KASAN PTI CPU: 0 PID: 7005 Comm: syz-executor.5 Not tainted 4.12.14-396-default #1 SLE15-SP1 (unreleased) RIP: 0010:mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 RSP: 0018:ffff88000d487a00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000000e RCX: 1ffff100082b0719 ... CR2: 000000000000000e CR3: 000000004b1bc003 CR4: 0000000000060ef0 Call Trace: kcm_create+0x600/0xbf0 [kcm] __sock_create+0x324/0x750 net/socket.c:1272 ... This is due to race between sock_create and unfinished register_pernet_device. kcm_create tries to do "net_generic(net, kcm_net_id)". but kcm_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with mutiple processes doing socket(PF_KCM, ...) and one process doing module removal. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01Merge branch 'net-sched-fix-stats-accounting-for-child-NOLOCK-qdiscs'David S. Miller
Paolo Abeni says: ==================== net: sched: fix stats accounting for child NOLOCK qdiscs Currently, stats accounting for NOLOCK qdisc enslaved to classful (lock) qdiscs is buggy. Per CPU values are ignored in most places, as a result, stats dump in the above scenario always report 0 length backlog and parent backlog len is not updated correctly on NOLOCK qdisc removal. The first patch address stats dumping, and the second one child qdisc removal. I'm targeting the net tree as this is a bugfix, but it could be moved to net-next due to the relatively large diffstat. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: sched: introduce and use qdisc tree flush/purge helpersPaolo Abeni
The same code to flush qdisc tree and purge the qdisc queue is duplicated in many places and in most cases it does not respect NOLOCK qdisc: the global backlog len is used and the per CPU values are ignored. This change addresses the above, factoring-out the relevant code and using the helpers introduced by the previous patch to fetch the correct backlog len. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01net: sched: introduce and use qstats read helpersPaolo Abeni
Classful qdiscs can't access directly the child qdiscs backlog length: if such qdisc is NOLOCK, per CPU values should be accounted instead. Most qdiscs no not respect the above. As a result, qstats fetching for most classful qdisc is currently incorrect: if the child qdisc is NOLOCK, it always reports 0 len backlog. This change introduces a pair of helpers to safely fetch both backlog and qlen and use them in stats class dumping functions, fixing the above issue and cleaning a bit the code. DRR needs also to access the child qdisc queue length, so it needs custom handling. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01cpufreq/intel_pstate: Load only on Intel hardwareBorislav Petkov
This driver is Intel-only so loading on anything which is not Intel is pointless. Prevent it from doing so. While at it, correct the "not supported" print statement to say CPU "model" which is what that test does. Fixes: 076b862c7e44 (cpufreq: intel_pstate: Add reasons for failure and debug messages) Suggested-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-01net/sched: fix ->get helper of the matchall clsNicolas Dichtel
It returned always NULL, thus it was never possible to get the filter. Example: $ ip link add foo type dummy $ ip link add bar type dummy $ tc qdisc add dev foo clsact $ tc filter add dev foo protocol all pref 1 ingress handle 1234 \ matchall action mirred ingress mirror dev bar Before the patch: $ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall Error: Specified filter handle not found. We have an error talking to the kernel After: $ tc filter get dev foo protocol all pref 1 ingress handle 1234 matchall filter ingress protocol all pref 1 matchall chain 0 handle 0x4d2 not_in_hw action order 1: mirred (Ingress Mirror to device bar) pipe index 1 ref 1 bind 1 CC: Yotam Gigi <yotamg@mellanox.com> CC: Jiri Pirko <jiri@mellanox.com> Fixes: fd62d9f5c575 ("net/sched: matchall: Fix configuration race") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01signal: don't silently convert SI_USER signals to non-current pidfdJann Horn
The current sys_pidfd_send_signal() silently turns signals with explicit SI_USER context that are sent to non-current tasks into signals with kernel-generated siginfo. This is unlike do_rt_sigqueueinfo(), which returns -EPERM in this case. If a user actually wants to send a signal with kernel-provided siginfo, they can do that with pidfd_send_signal(pidfd, sig, NULL, 0); so allowing this case is unnecessary. Instead of silently replacing the siginfo, just bail out with an error; this is consistent with other interfaces and avoids special-casing behavior based on security checks. Fixes: 3eb39f47934f ("signal: add pidfd_send_signal() syscall") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-04-01dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errorsIlya Dryomov
Some devices don't use blk_integrity but still want stable pages because they do their own checksumming. Examples include rbd and iSCSI when data digests are negotiated. Stacking DM (and thus LVM) on top of these devices results in sporadic checksum errors. Set BDI_CAP_STABLE_WRITES if any underlying device has it set. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * ↵Mikulas Patocka
PAGE_SIZE") The limit was already incorporated to dm-crypt with commit 4e870e948fba ("dm crypt: fix error with too large bios"), so we don't need to apply it globally to all targets. The quantity BIO_MAX_PAGES * PAGE_SIZE is wrong anyway because the variable ti->max_io_len it is supposed to be in the units of 512-byte sectors not in bytes. Reduction of the limit to 1048576 sectors could even cause data corruption in rare cases - suppose that we have a dm-striped device with stripe size 768MiB. The target will call dm_set_target_max_io_len with the value 1572864. The buggy code would reduce it to 1048576. Now, the dm-core will errorneously split the bios on 1048576-sector boundary insetad of 1572864-sector boundary and pass these stripe-crossing bios to the striped target. Cc: stable@vger.kernel.org # v4.16+ Fixes: 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm init: fix const confusion for dm_allowed_targets arrayAndi Kleen
A non const pointer to const cannot be marked initconst. Mark the array actually const. Fixes: 6bbc923dfcf5 dm: add support to directly boot to a mapped device Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm integrity: make dm_integrity_init and dm_integrity_exit staticYueHaibing
Fix sparse warnings: drivers/md/dm-integrity.c:3619:12: warning: symbol 'dm_integrity_init' was not declared. Should it be static? drivers/md/dm-integrity.c:3638:6: warning: symbol 'dm_integrity_exit' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01dm integrity: change memcmp to strncmp in dm_integrity_ctrMikulas Patocka
If the string opt_string is small, the function memcmp can access bytes that are beyond the terminating nul character. In theory, it could cause segfault, if opt_string were located just below some unmapped memory. Change from memcmp to strncmp so that we don't read bytes beyond the end of the string. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-01cifs: a smb2_validate_and_copy_iov failure does not mean the handle is invalid.Ronnie Sahlberg
It only means that we do not have a valid cached value for the file_all_info structure. CC: Stable <stable@vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-04-01SMB3: Allow persistent handle timeout to be configurable on mountSteve French
Reconnecting after server or network failure can be improved (to maintain availability and protect data integrity) by allowing the client to choose the default persistent (or resilient) handle timeout in some use cases. Today we default to 0 which lets the server pick the default timeout (usually 120 seconds) but this can be problematic for some workloads. Add the new mount parameter to cifs.ko for SMB3 mounts "handletimeout" which enables the user to override the default handle timeout for persistent (mount option "persistenthandles") or resilient handles (mount option "resilienthandles"). Maximum allowed is 16 minutes (960000 ms). Units for the timeout are expressed in milliseconds. See section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol specification for more information. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org>
2019-04-01smb3: Fix enumerating snapshots to AzureSteve French
Some servers (see MS-SMB2 protocol specification section 3.3.5.15.1) expect that the FSCTL enumerate snapshots is done twice, with the first query having EXACTLY the minimum size response buffer requested (16 bytes) which refreshes the snapshot list (otherwise that and subsequent queries get an empty list returned). So had to add code to set the maximum response size differently for the first snapshot query (which gets the size needed for the second query which contains the actual list of snapshots). Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> # 4.19+
2019-04-01cifs: fix kref underflow in close_shroot()Ronnie Sahlberg
Fix a bug where we used to not initialize the cached fid structure at all in open_shroot() if the open was successful but we did not get a lease. This would leave the structure uninitialized and later when we close the handle we would in close_shroot() try to kref_put() an uninitialized refcount. Fix this by always initializing this structure if the open was successful but only do the extra get() if we got a lease. This extra get() is only used to hold the structure until we get a lease break from the server at which point we will kref_put() it during lease processing. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2019-04-01MAINTAINERS: Fix pattern for Documentation path for Arm Mali KomedaLiviu Dudau
The Device Tree bindings documentation file is in a simplified path that doesn't match the MAINTAINERS entry. Reported-by: Joe Perches <joe@perches.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01arm/komeda: Compile komeda_debugfs_init() only if CONFIG_DEBUG_FS is enabledLiviu Dudau
We don't call this function if CONFIG_DEBUG_FS is not defined, but we should not be compiling it either, as the declaration of the debugfs core functions is not included. Reported by the kbuild test robot. Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01i40e: add tracking of AF_XDP ZC state for each queue pairBjörn Töpel
In commit f3fef2b6e1cc ("i40e: Remove umem from VSI") a regression was introduced; When the VSI was reset, the setup code would try to enable AF_XDP ZC unconditionally (as long as there was a umem placed in the netdev._rx struct). Here, we add a bitmap to the VSI that tracks if a certain queue pair has been "zero-copy enabled" via the ndo_bpf. The bitmap is used in i40e_xsk_umem, and enables zero-copy if and only if XDP is enabled, the corresponding qid in the bitmap is set and the umem is non-NULL. Fixes: f3fef2b6e1cc ("i40e: Remove umem from VSI") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-01i40e: move i40e_xsk_umem functionBjörn Töpel
The i40e_xsk_umem function was explicitly inlined in i40e.h. There is no reason for that, so move it to i40e_main.c instead. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-01drm/v3d: fix a missing check of pm_runtime_get_syncKangjie Lu
pm_runtime_get_sync could fail and thus deserves a check. The patch adds such a check and return its error code upstream if it indeed failed. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190324231602.2436-1-kjlu@umn.edu Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
2019-04-01MAINTAINERS: add drm/lima driver infoQiang Yu
Signed-off-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190329134748.8269-1-yuq825@gmail.com Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-04-01drm/lima: driver for ARM Mali4xx GPUsQiang Yu
- Mali 4xx GPUs have two kinds of processors GP and PP. GP is for OpenGL vertex shader processing and PP is for fragment shader processing. Each processor has its own MMU so prcessors work in virtual address space. - There's only one GP but multiple PP (max 4 for mali 400 and 8 for mali 450) in the same mali 4xx GPU. All PPs are grouped togather to handle a single fragment shader task divided by FB output tiled pixels. Mali 400 user space driver is responsible for assign target tiled pixels to each PP, but mali 450 has a HW module called DLBU to dynamically balance each PP's load. - User space driver allocate buffer object and map into GPU virtual address space, upload command stream and draw data with CPU mmap of the buffer object, then submit task to GP/PP with a register frame indicating where is the command stream and misc settings. - There's no command stream validation/relocation due to each user process has its own GPU virtual address space. GP/PP's MMU switch virtual address space before running two tasks from different user process. Error or evil user space code just get MMU fault or GP/PP error IRQ, then the HW/SW will be recovered. - Use GEM+shmem for MM. Currently just alloc and pin memory when gem object creation. GPU vm map of the buffer is also done in the alloc stage in kernel space. We may delay the memory allocation and real GPU vm map to command submission stage in the furture as improvement. - Use drm_sched for GPU task schedule. Each OpenGL context should have a lima context object in the kernel to distinguish tasks from different user. drm_sched gets task from each lima context in a fair way. mesa driver can be found here before upstreamed: https://gitlab.freedesktop.org/lima/mesa v8: - add comments for in_sync - fix ctx free miss mutex unlock v7: - remove lima_fence_ops with default value - move fence slab create to device probe - check pad ioctl args to be zero - add comments for user/kernel interface v6: - fix comments by checkpatch.pl v5: - export gp/pp version to userspace - rebase on drm-misc-next v4: - use get param interface to get info - separate context create/free ioctl - remove unused max sched task param - update copyright time - use xarray instead of idr - stop using drmP.h v3: - fix comments from kbuild robot - restrict supported arch to tested ones v2: - fix syscall argument check - fix job finish fence leak since kernel 5.0 - use drm syncobj to replace native fence - move buffer object GPU va map into kernel - reserve syscall argument space for future info - remove kernel gem modifier - switch TTM back to GEM+shmem MM - use time based io poll - use whole register name - adopt gem reservation obj integration - use drm_timeout_abs_to_jiffies Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Herring <robh@kerrnel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/291200/
2019-04-01vrf: check accept_source_route on the original netdeviceStephen Suryaputra
Configuration check to accept source route IP options should be made on the incoming netdevice when the skb->dev is an l3mdev master. The route lookup for the source route next hop also needs the incoming netdev. v2->v3: - Simplify by passing the original netdevice down the stack (per David Ahern). Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01drm/vc4: Make sure that the v3d ident debugfs has vc4's power on.Eric Anholt
Otherwise, you sometimes decode the ident fields based on 0xdeadbeef register reads. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-7-eric@anholt.net Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2019-04-01drm/vc4: Add helpers for pm get/put.Eric Anholt
This makes sure the vc4_reset doesn't hit an obscure race with the GET_PARAM ioctl, fixes a decrement outside of the lock, and prevents future code from making mistakes with the weird return value of pm_runtime_get_sync(). Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-6-eric@anholt.net Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2019-04-01drm/vc4: Use drm_printer for the debugfs and runtime bo stats output.Eric Anholt
Now I can extend the stats without more copy and pasting between the two. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-4-eric@anholt.net Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2019-04-01drm: shmem: Off by one in drm_gem_shmem_fault()Dan Carpenter
The shmem->pages[] array has "num_pages" elements so the > should be >= to prevent reading beyond the end of the array. The shmem->pages[] array is allocated in drm_gem_shmem_prime_import_sg_table(). Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190322064125.GA12551@kadam
2019-04-01drm/vc4: Use drm_print_regset32() for our debug register dumping.Eric Anholt
This removes a bunch of duplicated boilerplate for the debugfs vs runtime printk debug dumping. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-2-eric@anholt.net Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2019-04-01drm: Add a helper function for printing a debugfs_regset32.Eric Anholt
The debugfs_regset32 is nice to use for reducing boilerplate in dumping a bunch of regs in debugfs, but we also want to be able to print to dmesg them at runtime for driver debugging. drm_printer lets us format debugfs and the printk the same way. v2: Add some kerneldoc for the function (requested by danvet) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190220210343.28157-1-eric@anholt.net Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> (v1) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-04-01drm/v3d: Rename the fence signaled from IRQs to "irq_fence".Eric Anholt
We have another thing called the "done fence" that tracks when the scheduler considers the job done, and having the shared name was confusing. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190313235211.28995-2-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-04-01drm/v3d: Add a note about OOM vs FLDONE, which may be racing on v3.3.Eric Anholt
We deref v3d->bin_job in the work handler, but v3d->bin_job doesn't actually hold a ref on the job. v2: typo fix FRDONE -> FLDONE Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190313235211.28995-1-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com>
2019-04-01MAINTAINERS: net: update Solarflare maintainersBert Kenward
Cc: Martin Habets <mhabets@solarflare.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01x86/gpu: add ElkhartLake to gen11 early quirksRodrigo Vivi
Let's reserve EHL stolen memory for graphics. ElkhartLake is a gen11 platform which is compatible with ICL changes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Borislav Petkov <bp@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190315191938.22211-2-rodrigo.vivi@intel.com
2019-04-01drm/i915: Always backoff after a drm_modeset_lock() deadlockChris Wilson
If drm_modeset_lock() reports a deadlock it sets the ctx->contexted field and insists that the caller calls drm_modeset_backoff() or else it generates a WARN on cleanup. <4> [1601.870376] WARNING: CPU: 3 PID: 8445 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x35/0x40 <4> [1601.870395] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal i915 coretemp crct10dif_pclmul <6> [1601.870403] Console: switching <4> [1601.870403] snd_hda_intel <4> [1601.870406] to colour frame buffer device 320x90 <4> [1601.870406] crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel e1000e snd_hda_core cdc_ether ptp usbnet mii pps_core snd_pcm i2c_i801 mei_me mei prime_numbers <4> [1601.870422] CPU: 3 PID: 8445 Comm: cat Tainted: G U 5.0.0-rc7-CI-CI_DRM_5650+ #1 <4> [1601.870424] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2402.AD3.1810170014 10/17/2018 <4> [1601.870427] RIP: 0010:drm_modeset_drop_locks+0x35/0x40 <4> [1601.870430] Code: 29 48 8b 43 60 48 8d 6b 60 48 39 c5 74 19 48 8b 43 60 48 8d b8 70 ff ff ff e8 87 ff ff ff 48 8b 43 60 48 39 c5 75 e7 5b 5d c3 <0f> 0b eb d3 0f 1f 80 00 00 00 00 41 56 41 55 41 54 55 53 48 8b 6f <4> [1601.870432] RSP: 0018:ffffc90000d67ce8 EFLAGS: 00010282 <4> [1601.870435] RAX: 00000000ffffffdd RBX: ffffc90000d67d00 RCX: 5dbbe23d00000000 <4> [1601.870437] RDX: 0000000000000000 RSI: 0000000093e6194a RDI: ffffc90000d67d00 <4> [1601.870439] RBP: ffff88849e62e678 R08: 0000000003b7329a R09: 0000000000000001 <4> [1601.870441] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888492100410 <4> [1601.870442] R13: ffff88849ea50958 R14: ffff8884a67eb028 R15: ffff8884a67eb028 <4> [1601.870445] FS: 00007fa7a27745c0(0000) GS:ffff8884aff80000(0000) knlGS:0000000000000000 <4> [1601.870447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [1601.870449] CR2: 000055af07e66000 CR3: 00000004a8cc2006 CR4: 0000000000760ee0 <4> [1601.870451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4> [1601.870453] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4> [1601.870454] PKRU: 55555554 <4> [1601.870456] Call Trace: <4> [1601.870505] i915_dsc_fec_support_show+0x91/0x190 [i915] <4> [1601.870522] seq_read+0xdb/0x3c0 <4> [1601.870531] full_proxy_read+0x51/0x80 <4> [1601.870538] __vfs_read+0x31/0x190 <4> [1601.870546] ? __se_sys_newfstat+0x3c/0x60 <4> [1601.870552] vfs_read+0x9e/0x150 <4> [1601.870557] ksys_read+0x50/0xc0 <4> [1601.870564] do_syscall_64+0x55/0x190 <4> [1601.870569] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [1601.870572] RIP: 0033:0x7fa7a226d081 <4> [1601.870574] Code: fe ff ff 48 8d 3d 67 9c 0a 00 48 83 ec 08 e8 a6 4c 02 00 66 0f 1f 44 00 00 48 8d 05 81 08 2e 00 8b 00 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 <4> [1601.870576] RSP: 002b:00007ffcc05140c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 <4> [1601.870579] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fa7a226d081 <4> [1601.870581] RDX: 0000000000020000 RSI: 000055af07e63000 RDI: 0000000000000007 <4> [1601.870583] RBP: 0000000000020000 R08: 000000000000007b R09: 0000000000000000 <4> [1601.870585] R10: 000055af07e60010 R11: 0000000000000246 R12: 000055af07e63000 <4> [1601.870587] R13: 0000000000000007 R14: 000055af07e634bf R15: 0000000000020000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109745 Fixes: e845f099f1c6 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190329165152.29259-1-chris@chris-wilson.co.uk (cherry picked from commit ee6df5694a9a2e30566ae05e9c145a0f6d5e087f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-04-01tcp: fix a potential NULL pointer dereference in tcp_sk_exitDust Li
When tcp_sk_init() failed in inet_ctl_sock_create(), 'net->ipv4.tcp_congestion_control' will be left uninitialized, but tcp_sk_exit() hasn't check for that. This patch add checking on 'net->ipv4.tcp_congestion_control' in tcp_sk_exit() to prevent NULL-ptr dereference. Fixes: 6670e1524477 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-01drm/komeda: Add debugfs node "register" for register dumpjames qian wang (Arm Technology China)
Add a debugfs node "register" and entry function dump_register to dev/pipeline/component to register dump, then user can read "/sys/kernel/debug/komeda/register" to get the register values via these chip function. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> [Added the d71_layer_dump() function that was in a previous commit] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01drm/komeda: Add irq handlingjames qian wang (Arm Technology China)
1. Added irq_handler/irq_enable/irq_disable to komeda_dev_func, then the Komeda-CORE can control the HW irq via these chip function. 2. Install irq and register irq_handler to system by DRM, so once the IRQ coming, the handling sequence is: komeda_kms_irq_handler(int irq, void *data) /* step 1. call into the CHIP to recognize event */ mdev->funcs->irq_handler(mdev, &evts); /* step 2. notify the crtc to handle the events */ for (i = 0; i < kms->n_crtcs; i++) komeda_crtc_handle_event(&kms->crtcs[i], &evts); v2: - Move get IRQ number into this change. - Enable irq before drm_dev_register. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01drm/komeda: Add komeda_assemble_pipelinesjames qian wang (Arm Technology China)
komeda_accemble_pipelines is for: 1. Verifing the component->supported_inputs according to the pipeline->avail_components. 2. Generating component->supported_outputs. v2: Lower the debug message of komeda_component_dump to DRM_DEBUG. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01drm/komeda: Add D71 improc and timing_ctrlrjames qian wang (Arm Technology China)
Add and initialize improc and timing_ctrlr according to D71 capablitites v2: Rebase. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01drm/komeda: Add d71 compiz componentjames qian wang (Arm Technology China)
Implement d71_compiz_init and add compiz component to komeda-CORE v2: Rebase. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2019-04-01drm/komeda: Add d71 layerjames qian wang (Arm Technology China)
1. Add detailed layer/layer_state definitions 2. Add d71_layer_init to report layer features and capabilities according to D71 layer block. 3. Add d71_layer_updat/disable v2: Rebase. Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> [removed d71_layer_dump() from this commit] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
generated by cgit (git 2.34.1) at 2025-09-14 02:59:42 +0000