summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-14arm64: set POR_EL0 for kernel threadsJoey Gouly
Restrict kernel threads to only have RWX overlays for pkey 0. This matches what arch/x86 does, by defaulting to a restrictive PKRU. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kevin Brodsky <Kevin.Brodsky@arm.com> Link: https://lore.kernel.org/r/20241001133618.1547996-2-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2024-10-14MAINTAINERS: add Andrew Lunn as a co-maintainer of all networking driversJakub Kicinski
Andrew has been a pillar of the community for as long as I remember. Focusing on embedded networking, co-maintaining Ethernet PHYs and DSA code, but also actively reviewing MAC and integrated NIC drivers. Elevate Andrew to the status of co-maintainer of all netdev drivers. Acked-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20241011193303.2461769-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-14blk-mq: setup queue ->tag_set before initializing hctxMing Lei
Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") needs to check queue mapping via tag set in hctx's cpuhp handler. However, q->tag_set may not be setup yet when the cpuhp handler is enabled, then kernel oops is triggered. Fix the issue by setup queue tag_set before initializing hctx. Cc: stable@vger.kernel.org Reported-and-tested-by: Rick Koch <mr.rickkoch@gmail.com> Closes: https://lore.kernel.org/linux-block/CANa58eeNDozLaBHKPLxSAhEy__FPfJT_F71W=sEQw49UCrC9PQ@mail.gmail.com Fixes: 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241014005115.2699642-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-10-14ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projectsBaojun Xu
Add new vendor_id and subsystem_id in quirk for Lenovo, ASUS, and Dell projects. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20241011074040.524-1-baojun.xu@ti.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-14bcachefs: Fix sysfs warning in fstests generic/730,731Kent Overstreet
sysfs warns if we're removing a symlink from a directory that's no longer in sysfs; this is triggered by fstests generic/730, which simulates hot removal of a block device. This patch is however not a correct fix, since checking kobj->state_in_sysfs on a kobj owned by another subsystem is racy. A better fix would be to add the appropriate check to sysfs_remove_link() - and sysfs_create_link() as well. But kobject_add_internal()/kobject_del() do not as of today have locking that would support that. Note that the block/holder.c code appears to be subject to this race as well. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-14MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 driversAndrei Simion
To help Claudiu and offload the work, add myself to the maintainer list for those drivers. Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://patch.msgid.link/20241014092830.46709-1-andrei.simion@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-14sched/fair: Fix external p->on_rq usersPeter Zijlstra
Sean noted that ever since commit 152e11f6df29 ("sched/fair: Implement delayed dequeue") KVM's preemption notifiers have started mis-classifying preemption vs blocking. Notably p->on_rq is no longer sufficient to determine if a task is runnable or blocked -- the aforementioned commit introduces tasks that remain on the runqueue even through they will not run again, and should be considered blocked for many cases. Add the task_is_runnable() helper to classify things and audit all external users of the p->on_rq state. Also add a few comments. Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Reported-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20241010091843.GK33184@noisy.programming.kicks-ass.net
2024-10-14sched/psi: Fix mistaken CPU pressure indication after corrupted task state bugJohannes Weiner
Since sched_delayed tasks remain queued even after blocking, the load balancer can migrate them between runqueues while PSI considers them to be asleep. As a result, it misreads the migration requeue followed by a wakeup as a double queue: psi: inconsistent task state! task=... cpu=... psi_flags=4 clear=. set=4 First, call psi_enqueue() after p->sched_class->enqueue_task(). A wakeup will clear p->se.sched_delayed while a migration will not, so psi can use that flag to tell them apart. Then teach psi to migrate any "sleep" state when delayed-dequeue tasks are being migrated. Delayed-dequeue tasks can be revived by ttwu_runnable(), which will call down with a new ENQUEUE_DELAYED. Instead of further complicating the wakeup conditional in enqueue_task(), identify migration contexts instead and default to wakeup handling for all other cases. It's not just the warning in dmesg, the task state corruption causes a permanent CPU pressure indication, which messes with workload/machine health monitoring. Debugged-by-and-original-fix-by: K Prateek Nayak <kprateek.nayak@amd.com> Fixes: 152e11f6df29 ("sched/fair: Implement delayed dequeue") Closes: https://lore.kernel.org/lkml/20240830123458.3557-1-spasswolf@web.de/ Closes: https://lore.kernel.org/all/cd67fbcd-d659-4822-bb90-7e8fbb40a856@molgen.mpg.de/ Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lkml.kernel.org/r/20241010193712.GC181795@cmpxchg.org
2024-10-13bcachefs: Handle race between stripe reuse, invalidate_stripe_to_devKent Overstreet
When creating a new stripe, we may reuse an existing stripe that has some empty and some nonempty blocks. Generally, the existing stripe won't change underneath us - except for block sector counts, which we copy to the new key in ec_stripe_key_update. But the device removal path can now invalidate stripe pointers to a device, and that can race with stripe reuse. Change ec_stripe_key_update() to check for and resolve this inconsistency. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-13bcachefs: Fix kasan splat in new_stripe_alloc_buckets()Kent Overstreet
Update for BCH_SB_MEMBER_INVALID. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-13Merge tag 'hid-for-linus-2024101301' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for memory corruption regression in amd_sfh driver (Basavaraj Natikar) - fix for mis-reporting of BTN_TOOL_PEN and BTN_TOOL_RUBBER for AES sensors tools in Wacom driver (Jason Gerecke) - fix for unitialized variable use in intel-ish-hid driver (SurajSonawane2415) - a few device-specific quirks / device ID additions * tag 'hid-for-linus-2024101301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: Hardcode (non-inverted) AES pens as BTN_TOOL_PEN HID: amd_sfh: Switch to device-managed dmam_alloc_coherent() HID: multitouch: Add quirk for HONOR MagicBook Art 14 touchpad HID: multitouch: Add support for B2402FVA track point HID: plantronics: Workaround for an unexcepted opposite volume key hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma
2024-10-13bcachefs: Add missing validation for bch_stripe.csum_granularity_bitsKent Overstreet
Reported-by: syzbot+f8c98a50c323635be65d@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-13bcachefs: Fix missing bounds checks in bch2_alloc_read()Kent Overstreet
We were checking that the alloc key was for a valid device, but not a valid bucket. This is the upgrade path from versions prior to bcachefs being mainlined. Reported-by: syzbot+a1b59c8e1a3f022fd301@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-13bcachefs: fix uaf in bch2_dio_write_done()Kent Overstreet
Reported-by: syzbot+19ad84d5133871207377@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-13Linux 6.12-rc3v6.12-rc3Linus Torvalds
2024-10-13cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERSAlice Ryhl
The HAVE_CFI_ICALL_NORMALIZE_INTEGERS option has some tricky conditions when KASAN or GCOV are turned on, as in that case we need some clang and rustc fixes [1][2] to avoid boot failures. The intent with the current setup is that you should be able to override the check and turn on the option if your clang/rustc has the fix. However, this override does not work in practice. Thus, use the new RUSTC_LLVM_VERSION to correctly implement the check for whether the fix is available. Additionally, remove KASAN_HW_TAGS from the list of incompatible options. The CFI_ICALL_NORMALIZE_INTEGERS option is incompatible with KASAN because LLVM will emit some constructors when using KASAN that are assigned incorrect CFI tags. These constructors are emitted due to use of -fsanitize=kernel-address or -fsanitize=kernel-hwaddress that are respectively passed when KASAN_GENERIC or KASAN_SW_TAGS are enabled. However, the KASAN_HW_TAGS option relies on hardware support for MTE instead and does not pass either flag. (Note also that KASAN_HW_TAGS does not `select CONSTRUCTORS`.) Link: https://github.com/llvm/llvm-project/pull/104826 [1] Link: https://github.com/rust-lang/rust/pull/129373 [2] Fixes: 4c66f8307ac0 ("cfi: encode cfi normalized integers + kasan/gcov bug in Kconfig") Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20241010-icall-detect-vers-v1-2-8f114956aa88@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-10-13kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`Gary Guo
Each version of Rust supports a range of LLVM versions. There are cases where we want to gate a config on the LLVM version instead of the Rust version. Normalized cfi integer tags are one example [1]. The invocation of rustc-version is being moved from init/Kconfig to scripts/Kconfig.include for consistency with cc-version. Link: https://lore.kernel.org/all/20240925-cfi-norm-kasan-fix-v1-1-0328985cdf33@google.com/ [1] Signed-off-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20241011114040.3900487-1-gary@garyguo.net [ Added missing `-llvm` to the Usage documentation. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-10-13Merge tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Two fixes for Windows symlink handling" * tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix creating native symlinks pointing to current or parent directory cifs: Improve creating native symlinks pointing to directory
2024-10-13Merge tag 'usb-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported problems for 6.12-rc3. Include in here is: - fix for yurex driver that was caused in -rc1 - build error fix for usbg network filesystem code - onboard_usb_dev build fix - dwc3 driver fixes for reported errors - gadget driver fix - new USB storage driver quirk - xhci resume bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: net/9p/usbg: Fix build error USB: yurex: kill needless initialization in yurex_read Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" usb: xhci: Fix problem with xhci resume from suspend usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support usb: dwc3: core: Stop processing of pending events if controller is halted usb: dwc3: re-enable runtime PM after failed resume usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip usb: gadget: core: force synchronous registration
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13parport: Proper fix for array out-of-bounds accessTakashi Iwai
The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13Merge tag 'driver-core-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is a single driver core fix, and a .mailmap update. The fix is for the rust driver core bindings, turned out that the from_raw binding wasn't a good idea (don't want to pass a pointer to a reference counted object without actually incrementing the pointer.) So this change fixes it up as the from_raw binding came in in -rc1. The other change is a .mailmap update. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: mailmap: update mail for Fiona Behrens rust: device: change the from_raw() function
2024-10-13Merge tag 'iio-fixes-for-6.12a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...
2024-10-12Merge tag 'powerpc-6.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix crash in memcpy on 8xx due to dcbz workaround since recent changes Thanks to Christophe Leroy. * tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Fix kernel DTLB miss on dcbz
2024-10-12accel/qaic: Fix the for loop used to walk SG tablePranjal Ramajor Asha Kanojiya
Only for_each_sgtable_dma_sg() should be used to walk through a SG table to grab correct bus address and length pair after calling DMA MAP API on a SG table as DMA MAP APIs updates the SG table and for_each_sgtable_sg() walks through the original SG table. Fixes: ff13be830333 ("accel/qaic: Add datapath") Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241004193252.3888544-1-quic_jhugo@quicinc.com
2024-10-12pinctrl: ocelot: fix system hang on level based interruptsSergey Matsievskiy
The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, &reg); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` Cc: stable@vger.kernel.org Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/20241012105743.12450-2-matsievskiysv@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-10-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers and one in the FC transport class to add idempotence to state setting" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_fc: Allow setting rport state to current state scsi: wd33c93: Don't use stale scsi_pointer value scsi: fnic: Move flush_work initialization out of if block scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
2024-10-12Merge tag 'hwmon-for-v6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing dependencies on REGMAP_I2C for several drivers - Fix memory leak in adt7475 driver - Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver to match other sensor labels * tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Add missing dependency on REGMAP_I2C hwmon: (ltc2991) Add missing dependency on REGMAP_I2C hwmon: (adt7470) Add missing dependency on REGMAP_I2C hwmon: (adm9240) Add missing dependency on REGMAP_I2C hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C hwmon: (tmp513) Add missing dependency on REGMAP_I2C hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config() hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
2024-10-12PCI: Hold rescan lock while adding devices during host probeBartosz Golaszewski
Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code") Link: https://lore.kernel.org/r/20241003084342.27501-1-brgl@bgdev.pl Reported-by: Konrad Dybcio <konradybcio@kernel.org> Tested-by: Konrad Dybcio <konradybcio@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-10-12ASoC: qcom: Select missing common Soundwire module code on SDM845Krzysztof Kozlowski
SDM845 sound card driver uses qcom_snd_sdw_startup() from the common Soundwire module, so select it to fix build failures: ERROR: modpost: "qcom_snd_sdw_startup" [sound/soc/qcom/snd-soc-sdm845.ko] undefined! Fixes: d0e806b0cc62 ("ASoC: qcom: sdm845: add missing soundwire runtime stream alloc") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241012100957.129103-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-12bcachefs: Improve check_snapshot_exists()Kent Overstreet
Check if we have snapshot_trees or subvolumes that refer to the snapshot node being reconstructed, and use them. With this, the kill_btree_root test that blows away the snapshots btree now passes, and we're able to successfully reconstruct. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-12bcachefs: Fix bkey_nocow_lock()Kent Overstreet
This fixes an assertion pop in nocow_locking.c 00243 kernel BUG at fs/bcachefs/nocow_locking.c:41! 00243 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 00243 Modules linked in: 00243 Hardware name: linux,dummy-virt (DT) 00243 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00244 pc : bch2_bucket_nocow_unlock (/home/testdashboard/linux-7/fs/bcachefs/nocow_locking.c:41) 00244 lr : bkey_nocow_lock (/home/testdashboard/linux-7/fs/bcachefs/data_update.c:79) 00244 sp : ffffff80c82373b0 00244 x29: ffffff80c82373b0 x28: ffffff80e08958c0 x27: ffffff80e0880000 00244 x26: ffffff80c8237a98 x25: 00000000000000a0 x24: ffffff80c8237ab0 00244 x23: 00000000000000c0 x22: 0000000000000008 x21: 0000000000000000 00244 x20: ffffff80c8237a98 x19: 0000000000000018 x18: 0000000000000000 00244 x17: 0000000000000000 x16: 000000000000003f x15: 0000000000000000 00244 x14: 0000000000000008 x13: 0000000000000018 x12: 0000000000000000 00244 x11: 0000000000000000 x10: ffffff80e0880000 x9 : ffffffc0803ac1a4 00244 x8 : 0000000000000018 x7 : ffffff80c8237a88 x6 : ffffff80c8237ab0 00244 x5 : ffffff80e08988d0 x4 : 00000000ffffffff x3 : 0000000000000000 00244 x2 : 0000000000000004 x1 : 0003000000000d1e x0 : ffffff80e08988c0 00244 Call trace: 00244 bch2_bucket_nocow_unlock (/home/testdashboard/linux-7/fs/bcachefs/nocow_locking.c:41) 00245 bch2_data_update_init (/home/testdashboard/linux-7/fs/bcachefs/data_update.c:627 (discriminator 1)) 00245 promote_alloc.isra.0 (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:242 /home/testdashboard/linux-7/fs/bcachefs/io_read.c:304) 00245 __bch2_read_extent (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:949) 00246 __bch2_read (/home/testdashboard/linux-7/fs/bcachefs/io_read.c:1215) 00246 bch2_direct_IO_read (/home/testdashboard/linux-7/fs/bcachefs/fs-io-direct.c:132) 00246 bch2_read_iter (/home/testdashboard/linux-7/fs/bcachefs/fs-io-direct.c:201) 00247 aio_read.constprop.0 (/home/testdashboard/linux-7/fs/aio.c:1602) 00247 io_submit_one.constprop.0 (/home/testdashboard/linux-7/fs/aio.c:2003 /home/testdashboard/linux-7/fs/aio.c:2052) 00248 __arm64_sys_io_submit (/home/testdashboard/linux-7/fs/aio.c:2111 /home/testdashboard/linux-7/fs/aio.c:2081 /home/testdashboard/linux-7/fs/aio.c:2081) 00248 invoke_syscall.constprop.0 (/home/testdashboard/linux-7/arch/arm64/include/asm/syscall.h:61 /home/testdashboard/linux-7/arch/arm64/kernel/syscall.c:54) 00248 ========= FAILED TIMEOUT tiering_variable_buckets_replicas in 1200s Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-12bcachefs: Fix accounting replay flagsKent Overstreet
BCH_TRANS_COMMIT_journal_reclaim without BCH_WATERMARK_reclaim means "return an error if low on journal space" - but accounting replay must succeed. Fixes https://github.com/koverstreet/bcachefs/issues/656 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-12bcachefs: Fix invalid shift in member_to_text()Kent Overstreet
Reported-by: syzbot+064ce437a1ad63d3f6ef@syzkaller.appspotmail.com Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-11bcachefs: Fix bch2_have_enough_devs() for BCH_SB_MEMBER_INVALIDKent Overstreet
This fixes a kasan splat in the ec device removal tests. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-10-11RDMA/bnxt_re: Fix the GID table lengthKalesh AP
GID table length is reported by FW. The gid index which is passed to the driver during modify_qp/create_ah is restricted by the sgid_index field of struct ib_global_route. sgid_index is u8 and the max sgid possible is 256. Each GID entry in HW will have 2 GID entries in the kernel gid table. So we can support twice the gid table size reported by FW. Also, restrict the max GID to 256 also. Fixes: 847b97887ed4 ("RDMA/bnxt_re: Restrict the max_gids to 256") Link: https://patch.msgid.link/r/1728373302-19530-11-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pagesBhargava Chenna Marreddy
Avoid memory corruption while setting up Level-2 PBL pages for the non MR resources when num_pages > 256K. There will be a single PDE page address (contiguous pages in the case of > PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid memory access after 256K PBL entries in the PDE. Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Link: https://patch.msgid.link/r/1728373302-19530-10-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Change the sequence of updating the CQ toggle valueChandramohan Akula
Currently the CQ toggle value in the shared page (read by the userlib) is updated as part of the cqn_handler. There is a potential race of application calling the CQ ARM doorbell immediately and using the old toggle value. Change the sequence of updating CQ toggle value to update in the bnxt_qplib_service_nq function immediately after reading the toggle value to be in sync with the HW updated value. Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace") Link: https://patch.msgid.link/r/1728373302-19530-9-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix an error path in bnxt_re_add_deviceKalesh AP
In bnxt_re_add_device(), when register netdev notifier fails, driver is not unregistering the IB device in the error cleanup path. Also, removed the duplicate cleanup in error path of bnxt_re_probe. Fixes: 94a9dc6ac8f7 ("RDMA/bnxt_re: Group all operations under add_device and remove_device") Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loopSelvin Xavier
Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy. Fixes: 2ad4e6303a6d ("RDMA/bnxt_re: Implement doorbell pacing algorithm") Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix a possible NULL pointer dereferenceKalesh AP
There is a possibility of a NULL pointer dereference in the failure path of bnxt_re_add_device(). To address that, moved the update of "rdev->adev" to bnxt_re_dev_add(). Fixes: dee3da3422d5 ("RDMA/bnxt_re: Change aux driver data to en_info to hold more information") Link: https://patch.msgid.link/r/1728373302-19530-6-git-send-email-selvin.xavier@broadcom.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-rdma/CAH-L+nMCwymKGqf5pd8-FZNhxEkDD=kb6AoCaE6fAVi7b3e5Qw@mail.gmail.com/T/#t Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Return more meaningful errorKalesh AP
When the HWRM command fails, driver currently returns -EFAULT(Bad address). This does not look correct. Modified to return -EIO(I/O error). Fixes: cc1ec769b87c ("RDMA/bnxt_re: Fixing the Control path command and response handling") Fixes: 65288a22ddd8 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command") Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix incorrect dereference of srq in async eventKashyap Desai
Currently driver is not getting correct srq. Dereference only if qplib has a valid srq. Fixes: b02fd3f79ec3 ("RDMA/bnxt_re: Report async events and errors") Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix out of bound checkKalesh AP
Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 Fixes: 8b6573ff3420 ("bnxt_re: Update the debug counters for doorbell pacing") Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11RDMA/bnxt_re: Fix the max CQ WQEs for older adaptersAbhishek Mohapatra
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So restrict the value reported to 1M always for older adapters. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com> Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-10-11Merge tag 'linux_kselftest-fixes-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes for build, run-time errors, and reporting errors: - ftrace: regression test for a kernel crash when running function graph tracing and then enabling function profiler. - rseq: fix for mm_cid test failure. - vDSO: - fixes to reporting skip and other error conditions - changes unconditionally build chacha and getrandom tests on all architectures to make it easier for them to run in CIs - build error when sched.h to bring in CLONE_NEWTIME define" * tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: ftrace/selftest: Test combination of function_graph tracer and function profiler selftests/rseq: Fix mm_cid test failure selftests: vDSO: Explicitly include sched.h selftests: vDSO: improve getrandom and chacha error messages selftests: vDSO: unconditionally build getrandom test selftests: vDSO: unconditionally build chacha test
2024-10-11Merge tag 'devicetree-fixes-for-6.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable kunit tests for arm64+ACPI - Fix refcount issue in kunit tests - Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq - Drop type ref on 'msi-parent in fsl,qoriq-mc binding - Move elgin,jg10309-01 to its own binding from trivial-devices * tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Skip kunit tests when arm64+ACPI doesn't populate root node of: Fix unbalanced of node refcount and memory leaks dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent dt-bindings: display: elgin,jg10309-01: Add own binding
2024-10-11selftests: drivers: net: fix name not definedAlessandro Zanni
This fix solves this error, when calling kselftest with targets "drivers/net": File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__ if e.errno == errno.ENOSPC: NameError: name 'errno' is not defined The error was found by running tests manually with the command: make kselftest TARGETS="drivers/net" The module errno makes available standard error system symbols. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-11selftests: net/rds: add module not foundAlessandro Zanni
This fix solves this error, when calling kselftest with targets "net/rds": The error was found by running tests manually with the command: make kselftest TARGETS="net/rds" The patch also specifies to import ip() function from the utils module. Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 20:50:25 +0000