summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-25qede: Add support for ethtool private flagsYuval Mintz
Adds a getter for the interfaces private flags. The only parameter currently supported is whether the interface is a coupled function [required for supporting 100g]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Align statistics namesYuval Mintz
There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25net: better drop monitoring in ip{6}_recv_error()Eric Dumazet
We should call consume_skb(skb) when skb is properly consumed, or kfree_skb(skb) when skb must be dropped in error case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25tcp: SYN packets are now simply consumedEric Dumazet
We now have proper per-listener but also per network namespace counters for SYN packets that might be dropped. We replace the kfree_skb() by consume_skb() to be drop monitor [1] friendly, and remove an obsolete comment. FastOpen SYN packets can carry payload in them just fine. [1] perf record -a -g -e skb:kfree_skb sleep 1; perf report Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25memcg: relocate charge moving from ->attach to ->post_attachTejun Heo
Hello, So, this ended up a lot simpler than I originally expected. I tested it lightly and it seems to work fine. Petr, can you please test these two patches w/o the lru drain drop patch and see whether the problem is gone? Thanks. ------ 8< ------ If charge moving is used, memcg performs relabeling of the affected pages from its ->attach callback which is called under both cgroup_threadgroup_rwsem and thus can't create new kthreads. This is fragile as various operations may depend on workqueues making forward progress which relies on the ability to create new kthreads. There's no reason to perform charge moving from ->attach which is deep in the task migration path. Move it to ->post_attach which is called after the actual migration is finished and cgroup_threadgroup_rwsem is dropped. * move_charge_struct->mm is added and ->can_attach is now responsible for pinning and recording the target mm. mem_cgroup_clear_mc() is updated accordingly. This also simplifies mem_cgroup_move_task(). * mem_cgroup_move_task() is now called from ->post_attach instead of ->attach. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Debugged-and-tested-by: Petr Mladek <pmladek@suse.com> Reported-by: Cyril Hrubis <chrubis@suse.cz> Reported-by: Johannes Weiner <hannes@cmpxchg.org> Fixes: 1ed1328792ff ("sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem") Cc: <stable@vger.kernel.org> # 4.4+
2016-04-25cgroup, cpuset: replace cpuset_post_attach_flush() with ↵Tejun Heo
cgroup_subsys->post_attach callback Since e93ad19d0564 ("cpuset: make mm migration asynchronous"), cpuset kicks off asynchronous NUMA node migration if necessary during task migration and flushes it from cpuset_post_attach_flush() which is called at the end of __cgroup_procs_write(). This is to avoid performing migration with cgroup_threadgroup_rwsem write-locked which can lead to deadlock through dependency on kworker creation. memcg has a similar issue with charge moving, so let's convert it to an official callback rather than the current one-off cpuset specific function. This patch adds cgroup_subsys->post_attach callback and makes cpuset register cpuset_post_attach_flush() as its ->post_attach. The conversion is mostly one-to-one except that the new callback is called under cgroup_mutex. This is to guarantee that no other migration operations are started before ->post_attach callbacks are finished. cgroup_mutex is one of the outermost mutex in the system and has never been and shouldn't be a problem. We can add specialized synchronization around __cgroup_procs_write() but I don't think there's any noticeable benefit. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> # 4.4+ prerequisite for the next patch
2016-04-25ipv6: Revert optional address flusing on ifdown.David S. Miller
This reverts the following three commits: 70af921db6f8835f4b11c65731116560adb00c14 799977d9aafbf0ca0b9c39b04cbfb16db71302c9 f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-04-25 This series contains updates to ixgbe and ixgbevf. Emil provides several patches, starting with the consolidation of the logic behind configuring spoof checking. Fixed an issue which was causing link issues for backplane devices because x550em_a/x devices did not have a default value for mac->ops.setup_link. Refactored the ethtool stats to bring the logic closer to how ixgbe handles stats and sets up per-queue stats for ixgbevf. Mark adds a new register to wait for previous register writes to complete before issuing a register read, which is needed when slower links are in use. Fixed the flow control setup for x550em_a, the incorrect fc_setup function was being used. Don added a workaround for empty SFP+ cage crosstalk, since on some systems the crosstalk could lead to link flap on empty SFP+ cages. Jake converts ixgbe and ixgbevf to use the BIT() macro. Alex Duyck adds support for partial GSO segmentation in the case of tunnels for ixgbe and ixgbevf. Then preps for HyperV by moving the API negotiation into mac_ops. Arnd Bergmann provides a fix for the ARM compile warnings in linux-next by converting the use of a udelay() to msleep(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25Merge branch 'nla_align-set-2'David S. Miller
Nicolas Dichtel says: ==================== netlink: align attributes when needed (patchset #2) This is the continuation (series #2) of the work done to align netlink attributes when these attributes contain some 64-bit fields. In patch #3, I didn't modify the function ila_encap_nlsize(). I was waiting feedback for this patch: http://patchwork.ozlabs.org/patch/613766/ If it's approved, there will be an update to switch nla_total_size() to nla_total_size_64bit() after the merge of net in net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25wireless: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25netfilter/ipvs: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ieee802154: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25l2tp: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25bridge: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ovs: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv6: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25sched: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25rtnl: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25libceph: make authorizer destruction independent of ceph_auth_clientIlya Dryomov
Starting the kernel client with cephx disabled and then enabling cephx and restarting userspace daemons can result in a crash: [262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000 [262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130 [262671.584334] PGD 0 [262671.635847] Oops: 0000 [#1] SMP [262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu [262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014 [262672.268937] Workqueue: ceph-msgr con_work [libceph] [262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000 [262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130 [262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286 [262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018 [262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012 [262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000 [262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40 [262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840 [262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000 [262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0 [262673.417556] Stack: [262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04 [262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00 [262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800 [262673.805230] Call Trace: [262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph] [262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph] [262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph] [262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph] [262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph] [262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph] [262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph] [262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph] [262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph] [262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690 [262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph] [262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0 [262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470 [262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310 [262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0 [262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 [262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70 [262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0 What happens is the following: (1) new MON session is established (2) old "none" ac is destroyed (3) new "cephx" ac is constructed ... (4) old OSD session (w/ "none" authorizer) is put ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer) osd->o_auth.authorizer in the "none" case is just a bare pointer into ac, which contains a single static copy for all services. By the time we get to (4), "none" ac, freed in (2), is long gone. On top of that, a new vtable installed in (3) points us at ceph_x_destroy_authorizer(), so we end up trying to destroy a "none" authorizer with a "cephx" destructor operating on invalid memory! To fix this, decouple authorizer destruction from ac and do away with a single static "none" authorizer by making a copy for each OSD or MDS session. Authorizers themselves are independent of ac and so there is no reason for destroy_authorizer() to be an ac op. Make it an op on the authorizer itself by turning ceph_authorizer into a real struct. Fixes: http://tracker.ceph.com/issues/15447 Reported-by: Alan Zhang <alan.zhang@linux.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-04-25wcn36xx: Fill in capability listBjorn Andersson
Fill in the capability list with more values from the downstream driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Correct remove bss key response encodingBjorn Andersson
The WCN36XX_HAL_RMV_BSSKEY_RSP carries a single u32 with "status", so we can use the standard status check function for decoding the result. This is the last user of the v2 status checker, so remove the struct and helper function. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Delete BSS before idling linkBjorn Andersson
When disabling the beacon we must delete the bss before idling the link. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use correct command struct for EXIT_BMPS_REQPontus Fuchs
EXIT_BMPS_REQ was using the command struct for ENTER_BMPS_REQ. I spotted this when looking at command dumps. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Implement multicast filteringPontus Fuchs
Pass the multicast list to FW. This patch also adds a way to build the smd command in place. This is needed because the MC list command is too big for the stack. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [bjorn: dropped FIF_PROMISC_IN_BSS usage] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Track association statePontus Fuchs
Knowing the association state is needed for mc filtering. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Clear encrypt_type when deleting bss keyPontus Fuchs
This fixes a problem connecting to an open network after being connected to an encrypted network. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use allocated self sta index instead of hard codedPontus Fuchs
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Copy all members in config_sta v1 conversionPontus Fuchs
When converting to version 1 of the config_sta struct not all members where copied. This fixes the problem of multicast frames not being delivered on an encrypted network. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Parse trigger_ba response properlyPontus Fuchs
This message does not follow the canonical format and needs it's own parser. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Remove sta pointer in private vif structPontus Fuchs
This does not work with multiple sta's in a vif. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Fetch private sta data from sta entry instead of from vifPontus Fuchs
For consistency with other code. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Add helper macros to cast sta to privPontus Fuchs
While poking at this I also change two related things. I rename one variable to make the names consistent. I also move one assignment of priv_sta to the declaration to save a few lines. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use define for invalid index and fix typoPontus Fuchs
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use consistent name for private vifPontus Fuchs
Some code used priv_vif and some used vif_priv. Convert all to vif_priv for consistency. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Add helper macros to cast vif to private vif and vice versaPontus Fuchs
Makes the code a little easier to read. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Pad TIM PVM if neededPontus Fuchs
The wcn36xx FW expects a fixed size TIM PVM in the beacon template. If supplied with a shorter than expected PVM it will overwrite the IE following the TIM. Squashed with fix from Jason Mobarak <jam@cozybit.com>: Patch "wcn36xx: Pad TIM PVM if needed" has caused a regression in mesh beaconing. The field tim_off is always 0 for mesh mode, and thus pvm_len (referring to the TIM length field) and pad are both incorrectly calculated. Thus, msg_body.beacon_length is incorrectly calculated for mesh mode. Fix this. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Jason Mobarak <jam@cozybit.com> [bjorn: squashed in Jason's fixup] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Clean up wcn36xx_smd_send_beaconPontus Fuchs
Needed for coming improvements. No functional changes. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [bjorn: restored BEACON_TEMPLATE_SIZE define to 0x180] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25ath9k: Add a module parameter to invert LED polarity.Vittorio Gambaletta (VittGam)
The LED can be active high instead of active low on some hardware. Add the led_active_high module parameter. It defaults to -1 to obey platform data as before. Setting the parameter to 1 or 0 will force the LED respectively active high or active low. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25toshiba_acpi: Fix regression caused by hotkey enabling valueAzael Avalos
Commit 52cbae0127ad ("toshiba_acpi: Change default Hotkey enabling value") changed the hotkeys enabling value, as it was the same value Windows uses, however, it turns out that the value tells the EC that the driver will now take care of the hardware events like the physical RFKill switch or the pointing device toggle button. This patch reverts such commit by changing the default hotkey enabling value to 0x09, which enables hotkey events only, making the hardware buttons working again. Fixes bugs 113331 and 114941. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-25soreuseport: Resolve merge conflict for v4/v6 ordering fixCraig Gallek
d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") was merged as a bug fix to the net tree. Two conflicting changes were committed to net-next before the above fix was merged back to net-next: ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU") 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") These changes switched the datastructure used for TCP and UDP sockets from hlist_nulls to hlist. This patch applies the necessary parts of the net tree fix to net-next which were not automatic as part of the merge. Fixes: 1602f49b58ab ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a couple of regressions in the talitos driver that were introduced back in 4.3. The first bug causes a crash when the driver's AEAD functionality is used while the second bug prevents its AEAD feature from working once you get past the first bug" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix AEAD tcrypt tests crypto: talitos - fix crash in talitos_cra_init()
2016-04-25Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Enable dm814x and dra62x clock driver. This branch has a dependency to the clk-ti branch from the Linux clk tree for the ADPLL clock driver. Otherwise things won't keep booting properly when we flip over to use the clock driver instead of fixed clocks set up by the bootloader. * tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add clocks for dm814x ADPLL
2016-04-25sock: relax WARN_ON() in sock_owned_by_user()Eric Dumazet
Valdis reported tons of stack dumps caused by WARN_ON() in sock_owned_by_user() This test needs to be relaxed if/when lockdep disables itself. Note that other lockdep_sock_is_held() callers are all from rcu_dereference_protected() sections which already are disabled if/when lockdep has been disabled. Fixes: fafc4e1ea1a4 ("sock: tigthen lockdep checks for sock_owned_by_user") Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25md/raid0: remove empty line printk from dump_zonesMichał Pecio
Remove the final printk. All preceding output is already properly newline-terminated and the printk isn't even KERN_CONT to begin with, so it only adds one empty line to the log. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-04-25Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent Pull EFI fix from Matt Fleming: * Avoid out-of-bounds access in the efivars code when performing string matching on converted EFI variable names (Laszlo Ersek) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-25HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirkNazar Mokrynskyi
Needed for v2 of the device firmware, otherwise kernel will stuck for few seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot. Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-25Merge tag 'ipvs-for-v4.7' of ↵Pablo Neira Ayuso
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next Simon Horman says: ==================== IPVS Updates for v4.7 please consider these enhancements to the IPVS. They allow SIP connections originating from real-servers to be load balanced by the SIP psersitence engine as is already implemented in the other direction. And for better one packet scheduling (OPS) performance. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-04-25netfilter: ip6t_SYNPROXY: unnecessary to check whether ip6_route_output ↵Liping Zhang
returns NULL ip6_route_output() will never return a NULL pointer, so there's no need to check it. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-04-25netfilter: nf_ct_helper: disable automatic helper assignmentPablo Neira Ayuso
Four years ago we introduced a new sysctl knob to disable automatic helper assignment in 72110dfaa907 ("netfilter: nf_ct_helper: disable automatic helper assignment"). This knob kept this behaviour enabled by default to remain conservative. This measure was introduced to provide a secure way to configure iptables and connection tracking helpers through explicit rules. Give the time we have waited for this, let's turn off this by default now, worse case users still have a chance to recover the former behaviour by explicitly enabling this back through sysctl. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-09-30 19:21:44 +0000