summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-12drivers/block/floppy.c: comment neatening and remove naked ;Joe Perches
Spacing, column alignment and a for loop with a naked semicolon converted to an assign and while Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: remove LAST_OUT macroJoe Perches
Macros with hidden returns are not nice. Convert the 2 uses to use direct code. Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: hoist assigns from if()s, neateningJoe Perches
Move assigns above if()s Remove unnecessary parentheses from returns Use a temporary for a duplicated test Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: remove used once CHECK_READY macroJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: remove unnecessary bracesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: use pr_<level>Joe Perches
Convert bare printk to pr_info and pr_cont Convert printk(KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: #define space and column neateningJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/block/floppy.c: convert some #include <asm/ to #include <linux/Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12mm: introduce dump_page() and print symbolic flag namesWu Fengguang
- introduce dump_page() to print the page info for debugging some error condition. - convert three mm users: bad_page(), print_bad_pte() and memory offline failure. - print an extra field: the symbolic names of page->flags Example dump_page() output: [ 157.521694] page:ffffea0000a7cba8 count:2 mapcount:1 mapping:ffff88001c901791 index:0x147 [ 157.525570] page flags: 0x100000000100068(uptodate|lru|active|swapbacked) Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Alex Chiang <achiang@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mel Gorman <mel@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12drivers/scsi/ses.c: eliminate double freeJulia Lawall
The few lines below the kfree of hdr_buf may go to the label err_free which will also free hdr_buf. The most straightforward solution seems to be to just move the kfree of hdr_buf after these gotos. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier E; expression E1; iterator I; statement S; @@ *kfree(E); ... when != E = E1 when != I(E,...) S when != &E *kfree(E); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12mm: do not iterate over NR_CPUS in __zone_pcp_update()Thomas Gleixner
__zone_pcp_update() iterates over NR_CPUS instead of limiting the access to the possible cpus. This might result in access to uninitialized areas as the per cpu allocator only populates the per cpu memory for possible cpus. This problem was created as a result of the dynamic allocation of pagesets from percpu memory that went in during the merge window - commit 99dcc3e5a94ed491fbef402831d8c0bbb267f995 ("this_cpu: Page allocator conversion"). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12nommu: fix build breakageKAMEZAWA Hiroyuki
Commit 34e55232e59f7b19050267a05ff1226e5cd122a5 ("mm: avoid false sharing of mm_counter") added sync_mm_rss() for syncing loosely accounted rss counters. It's for CONFIG_MMU but sync_mm_rss is called even in NOMMU enviroment (kerne/exit.c, fs/exec.c). Above commit doesn't handle it well. This patch changes SPLIT_RSS_COUNTING depends on SPLIT_PTLOCKS && CONFIG_MMU And for avoid unnecessary function calls, sync_mm_rss changed to be inlined noop function in header file. Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12MAINTAINERS: add bfin_sdh driverMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12sdio: recognize io card without powercycleAlbert Herranz
SDIO Simplified Specification V2.00 states that it is strongly recommended that the host executes either a power reset or issues a CMD52 (I/O Reset) to re-initialize an I/O only card or the I/O portion of a combo card. Additionally, the CMD52 must be issued first because it cannot be issued after a CMD0. With this patch the Nintendo Wii SDIO-based WLAN card is detected after a system reset, without requiring a complete system powercycle. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12rtc/hctosys: only claim the RTC provided the system time if it didUwe Kleine-König
Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys contains a 1 (meaning "This rtc was used to initialize the system clock") even if reading the time at bootup failed. Moreover change error handling in rtc_hctosys() to use goto and so reduce the indention level. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12fs: buffer_head: remove kmem_cache constructor to reduce memory usage under slubRichard Kennedy
When using slub, having a kmem_cache constructor forces slub to add a free pointer to the size of the cached object, which can have a significant impact to the number of small objects that can fit into a slab. As buffer_head is relatively small and we can have large numbers of them, removing the constructor is a definite win. On x86_64 removing the constructor gives me 39 objects/slab, 3 more than without the patch. And on x86_32 73 objects/slab, which is 9 more. As alloc_buffer_head() already initializes each new object there is very little difference in actual code run. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12fs/ocfs2/cluster/tcp.c: remove use of NIPQUAD, use %pI4Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12Merge branches 'cxgb3', 'ipoib', 'misc' and 'nes' into for-nextRoland Dreier
2010-03-12RDMA/nes: Fix CX4 link problem in back-to-back configurationChien Tung
Commit 09124e19 ("RDMA/nes: Add support for KR device id 0x0110") took out too much code and broke CX4 link detection in back-to-back configuration. Put back the code that does the link check. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-12x86, UV: Fix target_cpus() in x2apic_uv_x.cJack Steiner
target_cpu() should initially target all cpus, not just cpu 0. Otherwise systems with lots of disks can exhaust the interrupt vectors on cpu 0 if a large number of disks are discovered before the irq balancer is running. Note: UV code only... Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100311184328.GA21433@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12mfd: Several MFD drivers should depend on GENERIC_HARDIRQSGeert Uytterhoeven
commit 5fb4d38b19d95a5f980f0a10adba798f5b92128c ("mfd: Move WM831x to generic IRQ") didn't take into account that genirq support depends on GENERIC_HARDIRQS. Additionally, 2.6.34-rc1 added: - commit 2afa62ea76027b00e472ddb672191e6e15425b43 ("mfd: Use genirq in 88pm860x"). - commit 760e4518788df6762700e6bb9dd8692379f11168 ("mfd: Convert WM8350 to genirq"). - commit 1f1cf8f98cf6588365efeaab8e7e7758aaa77f6e ("mfd: Update irq handler in max8925") Make all of them depend on GENERIC_HARDIRQS to avoid compile errors on architectures that don't support genirq yet. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-12mfd: Fix sm501 requested region sizeSamuel Ortiz
We should only request for the MFD used region, not the whole thing. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Tested-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
2010-03-12ipconfig: Handle devices which take some time to come up.David S. Miller
Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-11RDMA/nes: Clear stall bit before destroying NIC QPChien Tung
Clear the stall bit to drop any incoming packets while destroying NIC QP. This will prevent a chip resource leak. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11RDMA/nes: Set assume_aligned_header bitFaisal Latif
Set assume_aligned_header bit in QP context as requested by hardware group. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11RDMA/cxgb3: Wait at least one schedule cycle during device removalSteve Wise
During a hot-plug LLD removal event or an EEH error event, iw_cxgb3 must ensure that any/all threads that might be in a cxgb3 exported function must return from the function before iw_cxgb3 returns from its event processing. Do this by calling synchronize_net(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IB/mad: Ignore iWARP devices on device removalSteve Wise
When an iWARP device is unloaded, the ib_mad module logs errors. It should be ignoring iWARP devices on device removal just like it does on device add. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IPoIB: Include return code in trace message for ib_post_send() failuresOr Gerlitz
Print the return code of ib_post_send() if it fails to make these debugging messages more useful. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IPoIB: Fix TX queue lockup with mixed UD/CM trafficEli Cohen
The IPoIB UD QP reports send completions to priv->send_cq, which is usually left unarmed; it only gets armed when the number of outstanding send requests reaches the size of the TX queue. This arming is done only in the send path for the UD QP. However, when sending CM packets, the net queue may be stopped for the same reasons but no measures are taken to recover the UD path from a lockup. Consider this scenario: a host sends high rate of both CM and UD packets, with a TX queue length of N. If at some time the number of outstanding UD packets is more than N/2 and the overall outstanding packets is N-1, and CM sends a packet (making the number of outstanding sends equal N), the TX queue will be stopped. When all the CM packets complete, the number of outstanding packets will still be higher than N/2 so the TX queue will not be restarted. Fix this by calling ib_req_notify_cq() when the queue is stopped in the CM path. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11GFS2: Skip check for mandatory locks when unlockingSachin Prabhu
gfs2_lock() will skip locks on file which have mode set to 02666. This is a problem in cases where the mode of the file is changed after a process has obtained a lock on the file. Such a lock will be skipped and will result in a BUG in locks_remove_flock(). gfs2_lock() should skip the check for mandatory locks when unlocking a file. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11sched: Fix pick_next_highest_task_rt() for cgroupsPeter Zijlstra
Since pick_next_highest_task_rt() already iterates all the cgroups and is really only interested in tasks, skip over the !task entries. Reported-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Dhaval Giani <dhaval.giani@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11x86: Reduce per cpu warning boot up messagesMike Travis
Reduce warning message output to one line only instead of per cpu. Signed-of-by: Mike Travis <travis@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: x86@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11x86: Reduce per cpu MCA boot up messagesMike Travis
Don't write per cpu MCA boot up messages. Signed-of-by: Mike Travis <travis@sgi.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: x86@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11sched: Cleanup: remove unused variable in try_to_wake_up()Dan Carpenter
We haven't used the "orig_rq" variable since 055a00865d "Fix/add missing update_rq_clock() calls" Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: efault@gmx.de LKML-Reference: <20100306111752.GL4958@bicker> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11Merge branch 'tip/tracing/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
2010-03-11x86/mce: Fix RCU lockdep splatsPaul E. McKenney
Create an rcu_dereference_check_mce() that checks for RCU-sched read side and mce_read_mutex being held on update side. Replace uses of rcu_dereference() in arch/x86/kernel/cpu/mcheck/mce.c with this new macro. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11rcu: Increase RCU CPU stall timeouts if PROVE_RCUPaul E. McKenney
CONFIG_PROVE_RCU imposes additional overhead on the kernel, so increase the RCU CPU stall timeouts in an attempt to allow for this effect. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-2-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11ftrace: Replace read_barrier_depends() with rcu_dereference_raw()Paul E. McKenney
Replace the calls to read_barrier_depends() in ftrace_list_func() with rcu_dereference_raw() to improve readability. The reason that we use rcu_dereference_raw() here is that removed entries are never freed, instead they are simply leaked. This is one of a very few cases where use of rcu_dereference_raw() is the long-term right answer. And I don't yet know of any others. ;-) Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11GFS2: Allow the number of committed revokes to temporarily be negativeBenjamin Marzinski
GFS2 tracks the number of revokes and unrevokes that are part of committed transactions via sd_log_commited_revoke. It is possible for one process to add revokes during its transaction, while another process unrevokes them during its transaction. If the second process finishes its transaction first, sd_log_commited_revoke will be decremented by the number of unrevokes that the second process did, without first being incremented by the number of revokes the first process did. This is fine, since all started transactions must be completed before the journal can be flushed. However, sd_log_commited_revoke is an unsigned integer, and log_refund() causes an assertion failure if it would go negative at the end of a transaction. This patch makes sd_log_commited_revoke a signed integer and allows it to go negative. __gfs2_log_flush() still checks that it mataches the actual number of revokes. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11Input: wm831x-on - convert to use genirqMark Brown
Now that the WM831x core has been converted to use genirq for the interrupt controller there is no need for the client drivers to use a WM831x-specific API rather than just calling genirq directly. Also fixes a leak of the IRQ during init failure - the error path free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11Input: ads7846 - add wakeup supportRanjith Lohithakshan
Add wakeup support to the ads7846 driver. Platforms can enable wakeup capability by setting the wakeup flag in ads7846_platform_data. With this patch the ads7846 driver can be used to wake the system from suspend. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11Input: appletouch - fix integer overflow issueVadim Zaliva
When reading data from Geyser 2 touchpads used on post Oct 2005 Apple PowerBooks the driver was casting X and Y coordinates values to 'signed char'. Testing on one of such PowerBooks I have noticed that touchpad always generates positive values, but some of them are greater that 127, and thus, when cast to 'signed char' being interpreted as a negative. Such bigger values have been observed infrequently, closer to the edges of a touchpad, so the problem was not very visible. Nevertheless, the patch would potentially improve touchpad driver accuracy. Signed-off-by: Vadim Zaliva <lord@crocodile.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-10Merge branch 'wireless-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-03-10mac80211: Fix memory leak in ieee80211_if_write()Eric Dumazet
Fix memory leak and use kmalloc() instead of kzalloc() as we are going to overwrite the allocated buffer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix (dynamic) power save entryJuuso Oikarinen
Currently hardware with !IEEE80211_HW_PS_NULLFUNC_STACK and IEEE80211_HW_REPORTS_TX_ACK_STATUS will never enter PSM due to the conditions in the power save entry functions. Fix those conditions. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ipw2200: use kmalloc for large local variablesZhu Yi
Fixed below compiler warning: drivers/net/wireless/ipw2x00/ipw2200.c: In function ‘ipw_load_firmware’: drivers/net/wireless/ipw2x00/ipw2200.c:3260: warning: the frame size of 1168 bytes is larger than 1024 bytes Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: read eeprom IQ calibration values correctly for G modeBruno Randolf
we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix I/Q calibration (for real)Bruno Randolf
I/Q calibration was completely broken, resulting in a high number of CRC errors on received packets. before i could see around 10% to 20% CRC errors, with this patch they are between 0% and 3%. 1.) the removal of the mask in commit "ath5k: Fix I/Q calibration (f1cf2dbd0f798b71b1590e7aca6647f2caef1649)" resulted in no mask beeing used when writing the I/Q values into the register. additional errors in the calculation of the values (see 2.) resulted too high numbers, exceeding the masks, so wrong values like 0xfffffffe were written. to be safe we should always use the bitmask when writing parts of a register. 2.) using a (s32) cast for q_coff is a wrong conversion to signed, since we convert to a signed value later by substracting 128. this resulted in too low numbers for Q many times, which were limited to -16 by the boundary check later on. 3.) checked everything against the HAL sources and took over comments and minor optimizations from there. 4.) we can't use ENABLE_BITS when we want to write a number (the number can contain zeros). also always write the correction values first and set ENABLE bit last, like the HAL does. Signed-off-by: Bruno Randolf <br1@einfach.org> Cc: stable@kernel.org Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix TSF resetBruno Randolf
to reset the TSF, AR5K_BEACON_RESET_TSF has to be 1, not 0. also we have a function for that so use it. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: use fixed antenna for tx descriptorsBruno Randolf
when using a fixed antenna we should use the antenna number in all tx descriptors, otherwise the hardware will sometimes send the frame out on the other antenna. it seems like the hardware does not always respect the default antenna and diversity settings (esp. AR5K_STA_ID1_DEFAULT_ANTENNA). also i would like to note that antenna diversity does not always work correctly on 5414 (at least) when only one antenna is connected: for example all frames might be received on antenna A but still the HW tries to send on antenna B some times, causing packet loss. this is both verified with the antenna statistics output of the previous patch and a spectrum analyzer. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-12 15:44:32 +0000