summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-12pinctrl: at91: correct a few typosAlexandre Belloni
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12ARM: shmobile: koelsch: dts: Add gpio-keys deviceLaurent Pinchart
The board has 7 buttons connected to GPIOs, add a corresponding gpio-keys device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12serial: sh-sci: Fix warnings due to improper casts and printk formatsLaurent Pinchart
Use the %zu and %pad printk specifiers to print size_t and dma_addr_t variables, and cast pointers to uintptr_t instead of unsigned int where applicable. This fixes warnings on platforms where pointers and/or dma_addr_t have a different size than int. Cc: linux-serial@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: add USB Func DMAEngine supportKuninori Morimoto
HPB-DMAC has 2 channel for USB Func (= D0/D1) D0 is used as Tx, D1 is used as Rx on this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: rcar-gen2: Do not setup timer in non-secure modeBen Dooks
If the system has been started in non-secure mode, then the ARM generic timer is not configurable during the kernel initialisation. Currently the only thing we can check for is if the timer has been correctly configured during the boot process. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7791: add Ether clockSergei Shtylyov
Add support for R8A7791 Ether clock. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: camera-rcar header cleanupKuninori Morimoto
<linux/platform_data/camera-rcar.h> is needed on BockW, not setup-r8a7778.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: kzm9g: add FSI support for DTSKuninori Morimoto
This patch support FSI-AK4648 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: sh73a0: add FSI support via DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: sh73a0: add FSI clock support for DTKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7790: add I2C supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-11Merge branch 'pinmux/next/pfc' of git://linuxtv.org/pinchartl/fbdev into develLinus Walleij
2013-12-11pinctrl: make the MSM SoC driver depend on OFLinus Walleij
We had a compilation failure on x86_64 due to missing OF support as this was an implicit dependency. Add an explicit dependency on OF and OF_IRQ on the SoC driver. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-11ARM: shmobile: r8a7778: add SSIx DMAEngine supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Add VIN2 and VIN3 pinsValentine Barshak
There are VIN2 and VIN3 channels available on the R8A7790 SoC. VIN2 supports 4/8/16/18/24-bit data, while VIN3 supports 8-bit. Add both here, covering all possible data pin configurations. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Add missing VIN1 pinsValentine Barshak
Both VIN0 and VIN1 channels support identical input interfaces. Add missing VIN1 pins here and organize them in the same pin groups as VIN0. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Reorganize VIN0 data pinsValentine Barshak
This reorganizes and renames VIN0 data pin groups to cover all possible configurations. There's total of eight data pin groups, one per each configuration. Most of the groups share the same pin/mux array. Only the 18-bit configuration needs a separate pin/mux array since in combines interleaved data pins. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Group VIN0 HSYNC and VSYNC togetherValentine Barshak
This groups VIN0 HSYNC and VSYNC pins together since one cannot be used without another. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Rename VIN pin groupsValentine Barshak
This drops superfluous "signal" word from the pin group names and renames data_enable group to clkenb as in the h/w manual. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10sh-pfc: r8a7791: Fix msiof groups to follow GROUPTakashi Yoshii
SH_PFC_PIN_GROUP(), pins[], mux[], defines clk, sync, ss1, ss2, rx, tx But, msiof?_groups[] defines clk, ctrl, data Fix msiof[012]_groups members to be consistent to PIN_GROUP. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: r8a7790: Add Audio pin supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: r8a7790: Add SSI pin supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: Share common PORTCR macro definitionLaurent Pinchart
The macro is defined identically in four different locations. Share it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10pinctrl: make the MSM SoC driver depend on OFLinus Walleij
We had a compilation failure on x86_64 due to missing OF support as this was an implicit dependency. Add an explicit dependency on OF and OF_IRQ on the SoC driver. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Total failure with older approaches: what we need to do is have the *SoC subdriver* depend on OF and OF_IRQ. This is because the placeholder bool PINCTRL_MSM cannot cascade its dependencies when a subdriver selects it, Kconfig is smart but not that smart. ChangeLog v1->v2: - OK so "depends on OF" did not work here let's try to simply select OF and OF_IRQ for this then? It's one of those "warning: (PINCTRL_MSM8X74) selects PINCTRL_MSM which has unmet direct dependencies (PINCTRL && OF)" that I simply cannot find my way out of :-/
2013-12-10ARM: shmobile: marzen: enable HSPI0 in DTSSimon Horman
Based on work for the bockw board by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7779: add HSPI support to DTSISimon Horman
Based on work for the r8a7778 SoC by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7779 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7779" to the compatible string for the IRQ pins in case of r8a7779 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7778 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7778" to the compatible string for the IRQ pins in case of r8a7778 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7740 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7740" to the compatible string for the IRQ pins in case of r8a7740 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use sh73a0 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo: add FSI support for DTSKuninori Morimoto
This patch support FSI-WM8978 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7740: add FSI support via DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: emev2: Setup internal peripheral interrupts as level highLaurent Pinchart
Interrupts generated by SoC internal devices are currently marked as IRQ_TYPE_NONE. As they're level-triggered and active-high, mark them as such. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: emev2: Use interrupt macros in DT filesLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT filesLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Fix r8a7791 GPIO resources in DTSMagnus Damm
The r8a7791 GPIO resources are currently incorrect. Fix that by making them match the English r8a7791 v0.31 data sheet. Tested with GPIO LED using Koelsch DT reference. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-12-10ARM: shmobile: Include all 4 GiB of memory on Lager DT RefMagnus Damm
Add 2GiB of DRAM at 0x1_8000_0000 to support the full 4GiB of Lager system memory in case of DT Reference. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Include all 4 GiB of memory on LagerMagnus Damm
Add 2GiB of DRAM at 0x1_8000_0000 to support the full 4GiB of Lager system memory. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Include all 2 GiB of memory on APE6EVMTakashi Yoshii
Add 1GiB of DRAM at 0x2_0000_0000 to support the full 2GiB of APE6EVM system memory. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT RefMagnus Damm
Add 1GiB of DRAM at 0x2_0000_0000 to support the full 2GiB of APE6EVM system memory also in case of DT reference. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g-reference: Add GPIO keys to DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Koelsch DT reference GPIO LED supportMagnus Damm
Add led6, led7 and led8 to the Koelsch DT reference board support. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Enable DSW2 with gpio-keys on KZM9DMagnus Damm
Use the gpio-keys driver to support the 4 pins on the dip switch DSW2 which is mounted on the KZM9D board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231Laurent Pinchart
The device is configured to generate an active-low interrupt signal that needs to be acknowledged by the host. Configure the IRQ to trigger on low level. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7790 suffix for IRQC compat stringMagnus Damm
Add "renesas,irqc-r8a7790" to the compatible string for IRQC in case of r8a7790. This makes the IRQC follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7790 suffix for MMCIF compat stringMagnus Damm
Add "renesas,mmcif-r8a7790" to the compatible string for MMCIF in case of r8a7790. This makes the MMCIF follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7791 thermal device node to DTSMagnus Damm
Hook up the r8a7791 thermal sensor to the DTS. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7790 thermal device node to DTSMagnus Damm
Hook up the r8a7790 thermal sensor to the DTS. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTSMagnus Damm
Configure the "D" set of data signals for SCIF0 and SCIF1 on the Koelsch board to setup pinctrl serial console bits. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-24 22:53:34 +0000