summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-05filelock: fix potential use-after-free in posix_lock_inodeJeff Layton
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode(). The request pointer had been changed earlier to point to a lock entry that was added to the inode's list. However, before the tracepoint could fire, another task raced in and freed that lock. Fix this by moving the tracepoint inside the spinlock, which should ensure that this doesn't happen. Fixes: 74f6f5912693 ("locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock") Link: https://lore.kernel.org/linux-fsdevel/724ffb0a2962e912ea62bb0515deadf39c325112.camel@kernel.org/ Reported-by: Light Hsieh (謝明燈) <Light.Hsieh@mediatek.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20240702-filelock-6-10-v1-1-96e766aadc98@kernel.org Reviewed-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-05Merge patch series "cachefiles: random bugfixes"Christian Brauner
libaokun@huaweicloud.com <libaokun@huaweicloud.com> says: This is the third version of this patch series, in which another patch set is subsumed into this one to avoid confusing the two patch sets. (https://patchwork.kernel.org/project/linux-fsdevel/list/?series=854914) We've been testing ondemand mode for cachefiles since January, and we're almost done. We hit a lot of issues during the testing period, and this patch series fixes some of the issues. The patches have passed internal testing without regression. The following is a brief overview of the patches, see the patches for more details. Patch 1-2: Add fscache_try_get_volume() helper function to avoid fscache_volume use-after-free on cache withdrawal. Patch 3: Fix cachefiles_lookup_cookie() and cachefiles_withdraw_cache() concurrency causing cachefiles_volume use-after-free. Patch 4: Propagate error codes returned by vfs_getxattr() to avoid endless loops. Patch 5-7: A read request waiting for reopen could be closed maliciously before the reopen worker is executing or waiting to be scheduled. So ondemand_object_worker() may be called after the info and object and even the cache have been freed and trigger use-after-free. So use cancel_work_sync() in cachefiles_ondemand_clean_object() to cancel the reopen worker or wait for it to finish. Since it makes no sense to wait for the daemon to complete the reopen request, to avoid this pointless operation blocking cancel_work_sync(), Patch 1 avoids request generation by the DROPPING state when the request has not been sent, and Patch 2 flushes the requests of the current object before cancel_work_sync(). Patch 8: Cyclic allocation of msg_id to avoid msg_id reuse misleading the daemon to cause hung. Patch 9: Hold xas_lock during polling to avoid dereferencing reqs causing use-after-free. This issue was triggered frequently in our tests, and we found that anolis 5.10 had fixed it. So to avoid failing the test, this patch is pushed upstream as well. Baokun Li (7): netfs, fscache: export fscache_put_volume() and add fscache_try_get_volume() cachefiles: fix slab-use-after-free in fscache_withdraw_volume() cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() cachefiles: propagate errors from vfs_getxattr() to avoid infinite loop cachefiles: stop sending new request when dropping object cachefiles: cancel all requests for the object that is being dropped cachefiles: cyclic allocation of msg_id to avoid reuse Hou Tao (1): cachefiles: wait for ondemand_object_worker to finish when dropping object Jingbo Xu (1): cachefiles: add missing lock protection when polling fs/cachefiles/cache.c | 45 ++++++++++++++++++++++++++++- fs/cachefiles/daemon.c | 4 +-- fs/cachefiles/internal.h | 3 ++ fs/cachefiles/ondemand.c | 52 ++++++++++++++++++++++++++++++---- fs/cachefiles/volume.c | 1 - fs/cachefiles/xattr.c | 5 +++- fs/netfs/fscache_volume.c | 14 +++++++++ fs/netfs/internal.h | 2 -- include/linux/fscache-cache.h | 6 ++++ include/trace/events/fscache.h | 4 +++ 10 files changed, 123 insertions(+), 13 deletions(-) Link: https://lore.kernel.org/r/20240628062930.2467993-1-libaokun@huaweicloud.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-05ksmbd: discard write access to the directory openHobin Woo
may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Signed-off-by: Yoonho Shin <yoonho.shin@samsung.com> Signed-off-by: Hobin Woo <hobin.woo@samsung.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-07-05Merge tag 'i2c-host-fixes-6.10-rc7' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current This tag includes a nice fix in the PNX driver that has been pending for a long time. Piotr has replaced a potential lock in the interrupt context with a more efficient and straightforward handling of the timeout signaling.
2024-07-05arm64: dts: add description for solidrun cn9132 cex7 module and clearfog boardJosua Mayer
Add description for the SolidRun CN9132 COM-Express Type 7 module, and the Clearfog evaluation board. The COM-Express module includes: - CN9130 SoC - 2x 88F8215 Southbridges - eMMC - SPI Flash - DDR-4 SODIMM connector - 1GBase-T Ethernet PHY The Clearfog Evaluation board provides: - 1x 10Gbps SFP+ - 2x 5GBase-T RJ45 - 4x 1GBase-T RJ45 on DSA switch with 2.5Gbps cpu link - 1x full-size PCI-E x4 - 2x M.2 with PCI-E x1 - 1x M.2 with PCI-E x2 - 2x M.2 with PCI-E x1 and USB-2.0 - 1x M.2 with USB-2.0, USB-3.0 and 2x SIM slots - 1x mini-PCI-E x1 - 2x SATA (Laptop-Style connector with data and power) - 3x USB-3.0 Type-A - microSD slot Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05arm64: dts: add description for solidrun cn9131 solidwan boardJosua Mayer
Add description for the SolidRun CN9131 SolidWAN, based on CN9130 SoM with an extra communication processor on the carrier board. This board differentiates itself from CN9130 Clearfog by providing additional SoC native network interfaces and pci buses: 2x 10Gbps SFP+ 4x 1Gbps RJ45 1x miniPCI-E 1x m.2 b-key with sata, usb-2.0 and usb-3.0 1x m.2 m-key with pcie and usb-2.0 1x m.2 b-key with pcie, usb-2.0, usb-3.0 and 2x sim slots 1x mpcie with pcie only 2x type-a usb-2.0/3.0 Signed-off-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05arm64: dts: add description for solidrun cn9130 som and clearfog boardsJosua Mayer
Add description for the SolidRun CN9130 SoM, and Clearfog Base / Pro reference boards. The SoM has been designed as a pin-compatible replacement for the older Armada 388 based SoM. Therefore it supports the same boards and a similar feature set. Most notable upgrades: - 4x Cortex-A72 - 10Gbps SFP - Both eMMC and SD supported at the same time The developer first supporting this product at SolidRun decided to use different filenames for the DTBs: Armada 388 uses the full "clearfog" string while cn9130 uses the abbreviation "cf". This name is already hard-coded in pre-installed vendor u-boot and can not be changed easily. NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE: CN9130 SoM has a different footprint from Armada 388 SoM. Components on the carrier board below the SoM may collide causing damage, such as on Clearfog Base. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation boardJosua Mayer
Add bindings for the SolidRun CN9132 COM-Express Type 7 evaluation board. The CEX is based on CN9130 SoC and includes two southbridges. Because CN9132 and 9131 are just names for different designs around the same SoC, no soc compatibles beside marvell,cn9130 are needed. Signed-off-by: Josua Mayer <josua@solid-run.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05dt-bindings: arm64: marvell: add solidrun cn9130 som based boardsJosua Mayer
Add bindings for SolidRun boards based on CN9130 SoM. Three boards are added in total: - Clearfog Base - Clearfog Pro - SolidWAN The Clearfog boards are identical to the older Armada 388 based boards, upgraded with a new SoM and SoC. However the feature set and performance characteristics are different, therefore compatible strings from armada 388 versions are not included. SolidWAN uses the same SoM adding a southbridge on the carrier. Since 2019 there are bindings in-tree for two boards based on cn9130 and 9131. These are extremely verbose by listing cn9132, cn9131, cn9130, ap807-quad, ap807 for the SoC alone. CN9130 SoC combines an application processor (ap807) and a communication processor (cp115) in a single package. The communication processor (short CP) is also available separately as a southbridge. It only functions in combination with the CN9130 SoC. Complete systems adding one or two southbridges are by convention called CN9131 and CN9132 respectively. Despite different naming all systems are built around the same SoC. Therefore marvell,cn9131 and marvell,cn9132 can be omitted. The number of CPs is part of a board's BoM and can be reflected in the board compatible string instead. Existing bindings also describe cn9130 as a specialisation of ap807-quad. Usually board-level compatibles stop at the SoC without going into silicon versions or individual dies. There is no programming model at this layer, and in particular not for parts of an SoC. Therefore the ap compatibles can also be omitted. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05arm64: dts: armada-3720: align LED node name with bindingsKrzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: armada-3720-gl-mv1000.dtb: leds: 'power', 'vpn', 'wan' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05arm64: dts: armada-3720: align GPIO keys node name with bindingsKrzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: armada-3720-gl-mv1000.dtb: keys: 'reset' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05arm64: dts: st: describe power supplies for stm32mp257f-ev1 boardPascal Paillet
Describe power supplies for stm32mp257f-ev1 board. Signed-off-by: Pascal Paillet <p.paillet@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05arm64: dts: st: add scmi regulators on stm32mp25Pascal Paillet
Add SCMI regulators description on STM32MP25. Signed-off-by: Pascal Paillet <p.paillet@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05regulator: Add STM32MP25 regulator bindingsPascal Paillet
These bindings will be used for the SCMI voltage domain. Signed-off-by: Pascal Paillet <p.paillet@foss.st.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb filesAlexandre Torgue
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Use the following regex to update the file and drop two useless newlines too: s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@ Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 boardChristophe Roullier
ETHERNET2 instance is connected to Realtek PHY in RGMII mode Ethernet is SNSP IP with GMAC5 version. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsiChristophe Roullier
Add pinctrl entry related to ETH2 in stm32mp25-pinctrl.dtsi ethernet2: RGMII with crystal. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25Christophe Roullier
Both instances ethernet based on GMAC SNPS IP on stm32mp25. GMAC IP version is SNPS 5.3 Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05arm64: dts: st: add HPDMA nodes on stm32mp251Amelie Delaunay
The High Performance Direct Memory Access (HPDMA) controller is used to perform programmable data transfers between memory-mapped peripherals and memories (or between memories) via linked-lists. There are 3 instances of HPDMA on stm32mp251, using stm32-dma3 driver, with 16 channels per instance and with one interrupt per channel. Channels 0 to 7 are implemented with a FIFO of 8 bytes. Channels 8 to 11 are implemented with a FIFO of 32 bytes. Channels 12 to 15 are implemented with a FIFO of 128 bytes. Thanks to stm32-dma3 bindings, the user can ask for a channel with specific FIFO size. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC boardMarek Vasut
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board. This carrier board is populated with two gigabit ethernet ports and two Realtek RTL8211F PHYs, both are described in this DT patch. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: order stm32mp13-pinctrl nodesAlexandre Torgue
Keep alphabetic order for pins definition nodes for a better read. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1 for STM32MP135F-DK boardChristophe Roullier
Ethernet1: RMII with crystal Ethernet2: RMII with no cristal, need "phy-supply" property to work, today this property was managed by Ethernet glue, but should be present and managed in PHY node. So I will push second Ethernet in next step. PHYs used are SMSC (LAN8742A) Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK boardChristophe Roullier
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board. ethernet1: RMII with crystal. ethernet2: RMII without crystal. Add analog gpio pin configuration ("sleep") to manage power mode on stm32mp13. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13Christophe Roullier
Both instances ethernet based on GMAC SNPS IP on stm32mp13. GMAC IP version is SNPS 4.20. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dkUwe Kleine-König
To simplify identifying the pins where the PWM output is routed to, add a comment to each PWM device about the respective pin on the expansion connector. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boardsEtienne Carriere
Define the GIC interrupt (PPI 15) to be used on ST STM32MP15x boards for OP-TEE async notif. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: marvell: orion: align LED node name with bindingsKrzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDsKrzysztof Kozlowski
The 'gpio' property in GPIO LEDs is deprecated, as reported by dtbs_check: orion5x-lswsgl.dtb: gpio-leds: led-alarm: Unevaluated properties are not allowed ('gpio' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keysKrzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warnings: orion5x-lacie-ethernet-disk-mini-v2.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: orion: align GPIO keys node name with bindingsKrzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: align LED node name with bindingsKrzysztof Kozlowski
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keysKrzysztof Kozlowski
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warnings: kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: kirkwood: align GPIO keys node name with bindingsKrzysztof Kozlowski
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic nodeMarek Behún
The marvell,mpic interrupt controller has no children nodes. Drop the Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: marvell: Add 7-segment LED display on x530Chris Packham
The Allied Telesis x530 products have a 7-segment LED display which is used for node identification when the devices are stacked. Represent this as a gpio-7-segment device. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05dt-bindings: regulator: sprd,sc2731-regulator: convert to YAMLStanislav Jakubek
Convert the Spreadtrum SC2731 regulator bindings to DT schema. Change during conversion: - switch compatible from sprd,sc27xx-regulator to sprd,sc2731-regulator, same as the only in-tree user has done back in 2019 [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/sprd/sc2731.dtsi?h=v6.9&id=0419a75b1808dda225b17ba1509f195f23c0db88 Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/ZobxoobZvA8k3pyi@standask-GA-A55M-S2HP Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-05HID: samples: fix the 2 struct_ops definitionsBenjamin Tissoires
Turns out that this is not compiling anymore because the hid_bpf_ops struct_ops definition had a change during the revisions. Fixes: e342d6f6f7d8 ("HID: samples: convert the 2 HID-BPF samples into struct_ops") Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-07-05HID: fix for amples in for-6.11/bpfBenjamin Tissoires
To: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> --- Changes in v2: - EDITME: describe what is new in this series revision. - EDITME: use bulletpoints and terse descriptions. - Link to v1: https://lore.kernel.org/r/20240705-for-6-11-bpf-v1-1-1960e3165c9e@kernel.org --- b4-submit-tracking --- # This section is used internally by b4 prep for tracking purposes. { "series": { "revision": 2, "change-id": "20240705-for-6-11-bpf-a349efc08df8", "prefixes": [], "history": { "v1": [ "20240705-for-6-11-bpf-v1-1-1960e3165c9e@kernel.org" ] } } }
2024-07-05irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPICatalin Marinas
Compiling the GICv3 driver on arm32 with CONFIG_SMP disabled (CONFIG_ACPI is not available) generates an unused variable warning for 'broken_rdists'. Add a __maybe_unused attribute to silence the compiler. Fixes: d633da5d3ab1 ("irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs") Cc: <stable@vger.kernel.org> # .x Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-07-05USB: serial: option: add Rolling RW350-GL variantsVanillan Wang
Update the USB serial option driver support for the Rolling RW350-GL - VID:PID 33f8:0802, RW350-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) Here are the outputs of usb-devices: usbmode=63: mbim, pipe T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0802 Rev=00.01 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=USB DATA CARD C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms usbmode=64: mbim, others at (If#= 5 adb) MBIM(MI0) + GNSS(MI2) + AP log(MI3) + AP META(MI4) + ADB(MI5) + MD AT(MI6) + MD META(MI7) + NPT(MI8) + Debug(MI9) T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0802 Rev=00.01 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=USB DATA CARD C: #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=09(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-07-05Merge tag 'amd-drm-fixes-6.10-2024-07-03' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-07-03: amdgpu: - Freesync fixes - DML1 bandwidth fix - DCN 3.5 fixes - DML2 fix - Silence an UBSAN warning radeon: - GPUVM fix Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com
2024-07-05Merge tag 'drm-msm-next-2024-07-04' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.11 Core: - SM7150 support DPU: - SM7150 support - Fix DSC support for DSI panels in video mode - Fixed TE vsync source support for DSI command-mode panels - Fix for devices without UBWC in the display controller (ie. QCM2290) DSI: - Remove unused register-writing wrappers - Fix DSC support for panels in video mode - Add support for parsing TE vsync source - Add support for MSM8937 (28nm DSI PHY) MDP5: - Add support for MSM8937 - Fix configuration for MSM8953 GPU: - Split giant device table into per-gen "hw catalog" similar to what is done on the display side of the driver - Fix a702 UBWC mode - Fix unused variably warnings - GPU memory traces - Add param for userspace to know if raytracing is supported - Memory barrier cleanup and GBIF unhalt fix - X185 support (aka gpu in X1 laptop chips) - a505 support - fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
2024-07-05Merge tag 'drm-misc-next-2024-07-04' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for $kernel-version: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp/mst: Fix daisy-chaining at resume - dsc: Add helper to dump the DSC configuration - tests: Add tests for the new monochrome TV mode variant Driver Changes: - ast: Refactor the mode setting code - panfrost: Fix devfreq job reporting - stm: Add LDVS support, DSI PHY updates - panels: - New panel: AUO G104STN01, K&d kd101ne3-40ti, Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240704-curvy-outstanding-lizard-bcea78@houat
2024-07-05Merge tag 'drm-intel-gt-next-2024-07-04' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: Fixes/improvements/new stuff: - Downgrade stolen lmem setup warning [gem] (Jonathan Cavitt) - Evaluate GuC priority within locks [gt/uc] (Andi Shyti) - Fix potential UAF by revoke of fence registers [gt] (Janusz Krzysztofik) - Return NULL instead of '0' [gem] (Andi Shyti) - Use the correct format specifier for resource_size_t [gem] (Andi Shyti) - Suppress oom warning in favour of ENOMEM to userspace [gem] (Nirmoy Das) Miscellaneous: - Evaluate forcewake usage within locks [gt] (Andi Shyti) - Fix typo in comment [gt/uc] (Andi Shyti) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZoZP6mUSergfzFMh@linux
2024-07-05openvswitch: prepare for stolen verdict coming from conntrack and nat engineFlorian Westphal
At this time, conntrack either returns NF_ACCEPT or NF_DROP. To improve debuging it would be nice to be able to replace NF_DROP verdict with NF_DROP_REASON() helper, This helper releases the skb instantly (so drop_monitor can pinpoint precise location) and returns NF_STOLEN. Prepare call sites to deal with this before introducing such changes in conntrack and nat core. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Aaron Conole <aconole@redhat.om> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-05Merge tag 'amd-drm-next-6.11-2024-07-03' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-07-03: amdgpu: - Use vmalloc for dc_state - Replay fixes - Freesync fixes - DCN 4.0.1 fixes - DML fixes - DCC updates - Misc code cleanups and bug fixes - 8K display fixes - DCN 3.5 fixes - Restructure DIO code - DML1 fixes - DML2 fixes - GFX11 fix - GFX12 updates - GFX12 modifiers fixes - RAS fixes - IP dump fixes - Add some updated IP version checks _ Silence UBSAN warning radeon: - GPUVM fix Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240703211314.2041893-1-alexander.deucher@amd.com
2024-07-05ARM: dts: stm32: Missing clocks for stm32f429's syscfg.Yanjun Yang
Without clock definition, SYSCFG will not work, EXTI interrupt for port other than GPIOA will fail to operate. Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC boardMarek Vasut
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC carrier board. The SoM contains the following peripherals: - STPMIC (power delivery) - 512MB DDR3L memory - eMMC and SDIO WiFi module The DHSBC carrier board contains the following peripherals: - Two RGMII Ethernet ports - USB-A Host port, USB-C peripheral port, USB-C power supply plug - Expansion connector Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
generated by cgit (git 2.34.1) at 2025-09-23 17:41:52 +0000