| Age | Commit message (Collapse) | Author |
|---|
|
allocations
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes: 3250845d0526 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sven van Ashbrook <svenva@chromium.org>
Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The fast-path timer delivery introduced a recursive locking deadlock
when userspace configures a timer which has already expired and is
delivered immediately. The call to kvm_xen_inject_timer_irqs() can
call to kvm_xen_set_evtchn() which may take kvm->arch.xen.xen_lock,
which is already held in kvm_xen_vcpu_get_attr().
============================================
WARNING: possible recursive locking detected
6.8.0-smp--5e10b4d51d77-drs #232 Tainted: G O
--------------------------------------------
xen_shinfo_test/250013 is trying to acquire lock:
ffff938c9930cc30 (&kvm->arch.xen.xen_lock){+.+.}-{3:3}, at: kvm_xen_set_evtchn+0x74/0x170 [kvm]
but task is already holding lock:
ffff938c9930cc30 (&kvm->arch.xen.xen_lock){+.+.}-{3:3}, at: kvm_xen_vcpu_get_attr+0x38/0x250 [kvm]
Now that the gfn_to_pfn_cache has its own self-sufficient locking, its
callers no longer need to ensure serialization, so just stop taking
kvm->arch.xen.xen_lock from kvm_xen_set_evtchn().
Fixes: 77c9b9dea4fb ("KVM: x86/xen: Use fast path for Xen timer delivery")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-6-dwmw2@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The locking on the gfn_to_pfn_cache is... interesting. And awful.
There is a rwlock in ->lock which readers take to ensure protection
against concurrent changes. But __kvm_gpc_refresh() makes assumptions
that certain fields will not change even while it drops the write lock
and performs MM operations to revalidate the target PFN and kernel
mapping.
Commit 93984f19e7bc ("KVM: Fully serialize gfn=>pfn cache refresh via
mutex") partly addressed that — not by fixing it, but by adding a new
mutex, ->refresh_lock. This prevented concurrent __kvm_gpc_refresh()
calls on a given gfn_to_pfn_cache, but is still only a partial solution.
There is still a theoretical race where __kvm_gpc_refresh() runs in
parallel with kvm_gpc_deactivate(). While __kvm_gpc_refresh() has
dropped the write lock, kvm_gpc_deactivate() clears the ->active flag
and unmaps ->khva. Then __kvm_gpc_refresh() determines that the previous
->pfn and ->khva are still valid, and reinstalls those values into the
structure. This leaves the gfn_to_pfn_cache with the ->valid bit set,
but ->active clear. And a ->khva which looks like a reasonable kernel
address but is actually unmapped.
All it takes is a subsequent reactivation to cause that ->khva to be
dereferenced. This would theoretically cause an oops which would look
something like this:
[1724749.564994] BUG: unable to handle page fault for address: ffffaa3540ace0e0
[1724749.565039] RIP: 0010:__kvm_xen_has_interrupt+0x8b/0xb0
I say "theoretically" because theoretically, that oops that was seen in
production cannot happen. The code which uses the gfn_to_pfn_cache is
supposed to have its *own* locking, to further paper over the fact that
the gfn_to_pfn_cache's own papering-over (->refresh_lock) of its own
rwlock abuse is not sufficient.
For the Xen vcpu_info that external lock is the vcpu->mutex, and for the
shared info it's kvm->arch.xen.xen_lock. Those locks ought to protect
the gfn_to_pfn_cache against concurrent deactivation vs. refresh in all
but the cases where the vcpu or kvm object is being *destroyed*, in
which case the subsequent reactivation should never happen.
Theoretically.
Nevertheless, this locking abuse is awful and should be fixed, even if
no clear explanation can be found for how the oops happened. So expand
the use of the ->refresh_lock mutex to ensure serialization of
activate/deactivate vs. refresh and make the pfncache locking entirely
self-sufficient.
This means that a future commit can simplify the locking in the callers,
such as the Xen emulation code which has an outstanding problem with
recursive locking of kvm->arch.xen.xen_lock, which will no longer be
necessary.
The rwlock abuse described above is still not best practice, although
it's harmless now that the ->refresh_lock is held for the entire duration
while the offending code drops the write lock, does some other stuff,
then takes the write lock again and assumes nothing changed. That can
also be fixed^W cleaned up in a subsequent commit, but this commit is
a simpler basis for the Xen deadlock fix mentioned above.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-5-dwmw2@infradead.org
[sean: use guard(mutex) to fix a missed unlock]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The kvm_xen_inject_vcpu_vector() function has a comment saying "the fast
version will always work for physical unicast", justifying its use of
kvm_irq_delivery_to_apic_fast() and the WARN_ON_ONCE() when that fails.
In fact that assumption isn't true if X2APIC isn't in use by the guest
and there is (8-bit x)APIC ID aliasing. A single "unicast" destination
APIC ID *may* then be delivered to multiple vCPUs. Remove the warning,
and in fact it might as well just call kvm_irq_delivery_to_apic().
Reported-by: Michal Luczaj <mhal@rbox.co>
Fixes: fde0451be8fb3 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-4-dwmw2@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Linux guests since commit b1c3497e604d ("x86/xen: Add support for
HVMOP_set_evtchn_upcall_vector") in v6.0 onwards will use the per-vCPU
upcall vector when it's advertised in the Xen CPUID leaves.
This upcall is injected through the guest's local APIC as an MSI, unlike
the older system vector which was merely injected by the hypervisor any
time the CPU was able to receive an interrupt and the upcall_pending
flags is set in its vcpu_info.
Effectively, that makes the per-CPU upcall edge triggered instead of
level triggered, which results in the upcall being lost if the MSI is
delivered when the local APIC is *disabled*.
Xen checks the vcpu_info->evtchn_upcall_pending flag when the local APIC
for a vCPU is software enabled (in fact, on any write to the SPIV
register which doesn't disable the APIC). Do the same in KVM since KVM
doesn't provide a way for userspace to intervene and trap accesses to
the SPIV register of a local APIC emulated by KVM.
Fixes: fde0451be8fb3 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240227115648.3104-3-dwmw2@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
A test program such as http://david.woodhou.se/timerlat.c confirms user
reports that timers are increasingly inaccurate as the lifetime of a
guest increases. Reporting the actual delay observed when asking for
100µs of sleep, it starts off OK on a newly-launched guest but gets
worse over time, giving incorrect sleep times:
root@ip-10-0-193-21:~# ./timerlat -c -n 5
00000000 latency 103243/100000 (3.2430%)
00000001 latency 103243/100000 (3.2430%)
00000002 latency 103242/100000 (3.2420%)
00000003 latency 103245/100000 (3.2450%)
00000004 latency 103245/100000 (3.2450%)
The biggest problem is that get_kvmclock_ns() returns inaccurate values
when the guest TSC is scaled. The guest sees a TSC value scaled from the
host TSC by a mul/shift conversion (hopefully done in hardware). The
guest then converts that guest TSC value into nanoseconds using the
mul/shift conversion given to it by the KVM pvclock information.
But get_kvmclock_ns() performs only a single conversion directly from
host TSC to nanoseconds, giving a different result. A test program at
http://david.woodhou.se/tsdrift.c demonstrates the cumulative error
over a day.
It's non-trivial to fix get_kvmclock_ns(), although I'll come back to
that. The actual guest hv_clock is per-CPU, and *theoretically* each
vCPU could be running at a *different* frequency. But this patch is
needed anyway because...
The other issue with Xen timers was that the code would snapshot the
host CLOCK_MONOTONIC at some point in time, and then... after a few
interrupts may have occurred, some preemption perhaps... would also read
the guest's kvmclock. Then it would proceed under the false assumption
that those two happened at the *same* time. Any time which *actually*
elapsed between reading the two clocks was introduced as inaccuracies
in the time at which the timer fired.
Fix it to use a variant of kvm_get_time_and_clockread(), which reads the
host TSC just *once*, then use the returned TSC value to calculate the
kvmclock (making sure to do that the way the guest would instead of
making the same mistake get_kvmclock_ns() does).
Sadly, hrtimers based on CLOCK_MONOTONIC_RAW are not supported, so Xen
timers still have to use CLOCK_MONOTONIC. In practice the difference
between the two won't matter over the timescales involved, as the
*absolute* values don't matter; just the delta.
This does mean a new variant of kvm_get_time_and_clockread() is needed;
called kvm_get_monotonic_and_clockread() because that's what it does.
Fixes: 536395260582 ("KVM: x86/xen: handle PV timers oneshot mode")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-2-dwmw2@infradead.org
[sean: massage moved comment, tweak if statement formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The "controllen" variable is type size_t (unsigned long). Casting it
to int could lead to an integer underflow.
The check_add_overflow() function considers the type of the destination
which is type int. If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.
However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.
Good: 100 + (unsigned long)-4 = 96 <-- overflow
Bad: 100 + (int)-4 = 96 <-- no overflow
I deleted the cast of the sizeof() as well. That's not a bug but the
cast is unnecessary.
Fixes: 9b0fc3c054ff ("io_uring: fix types in io_recvmsg_multishot_overflow")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The namelen is of type int. It shouldn't be made size_t which is
unsigned. The signed number is needed for error checking before use.
Fixes: c55978024d12 ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240301144349.2807544-1-usama.anjum@collabora.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 873aefb376bbc0ed1dd2381ea1d6ec88106fdbd4.
This was a heinous workaround and it turns out it's been fixed in mm
twice since it was introduced. Most recently, commit c8070b787519
("mm: Don't pin ZERO_PAGE in pin_user_pages()") would have prevented
running up the zeropage refcount, but even before that commit
84209e87c696 ("mm/gup: reliable R/O long-term pinning in COW mappings")
avoids the vfio use case from pinning the zeropage at all, instead
replacing it with exclusive anonymous pages.
Remove this now useless overhead.
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240229223544.257207-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The NVIDIA Grace Hopper GPUs have device memory that is supposed to be
used as a regular RAM. It is accessible through CPU-GPU chip-to-chip
cache coherent interconnect and is present in the system physical
address space. The device memory is split into two regions - termed
as usemem and resmem - in the system physical address space,
with each region mapped and exposed to the VM as a separate fake
device BAR [1].
Owing to a hardware defect for Multi-Instance GPU (MIG) feature [2],
there is a requirement - as a workaround - for the resmem BAR to
display uncached memory characteristics. Based on [3], on system with
FWB enabled such as Grace Hopper, the requisite properties
(uncached, unaligned access) can be achieved through a VM mapping (S1)
of NORMAL_NC and host mapping (S2) of MT_S2_FWB_NORMAL_NC.
KVM currently maps the MMIO region in S2 as MT_S2_FWB_DEVICE_nGnRE by
default. The fake device BARs thus displays DEVICE_nGnRE behavior in the
VM.
The following table summarizes the behavior for the various S1 and S2
mapping combinations for systems with FWB enabled [3].
S1 | S2 | Result
NORMAL_NC | NORMAL_NC | NORMAL_NC
NORMAL_NC | DEVICE_nGnRE | DEVICE_nGnRE
Recently a change was added that modifies this default behavior and
make KVM map MMIO as MT_S2_FWB_NORMAL_NC when a VMA flag
VM_ALLOW_ANY_UNCACHED is set [4]. Setting S2 as MT_S2_FWB_NORMAL_NC
provides the desired behavior (uncached, unaligned access) for resmem.
To use VM_ALLOW_ANY_UNCACHED flag, the platform must guarantee that
no action taken on the MMIO mapping can trigger an uncontained
failure. The Grace Hopper satisfies this requirement. So set
the VM_ALLOW_ANY_UNCACHED flag in the VMA.
Applied over next-20240227.
base-commit: 22ba90670a51
Link: https://lore.kernel.org/all/20240220115055.23546-4-ankita@nvidia.com/ [1]
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [2]
Link: https://developer.arm.com/documentation/ddi0487/latest/ section D8.5.5 [3]
Link: https://lore.kernel.org/all/20240224150546.368-1-ankita@nvidia.com/ [4]
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240229193934.2417-1-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux into v6.9/vfio/next
|
|
Enable device system suspend and resume PM support, and mark the device
state as suspended during system suspend to reject any data transfer.
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
DRV_NAME was useful back in the days. But here, being used once, it is
only cruft.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes
maximum clock stretching not maximum transfer time. Additionally, it is
deprecated because of issues. Move this driver to the correct binding.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
"i2c-scl-clk-low-timeout-us" has flaws in itself and the usage here is
all wrong. The driver doesn't use it as a maximum time for clock
stretching but the maximum time for a total transfer. We already have
a binding for the latter. Convert the wrong binding from examples.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Obviously drivers/vfio/platform/vfio_amba.c started its life as a
simplified copy of drivers/dma/pl330.c, but not all variable names were
updated.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1d1b873b59b208547439225aee1f24d6f2512a1f.1708945194.git.geert+renesas@glider.be
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Kui-Feng Lee says:
====================
The BPF struct_ops previously only allowed for one page to be used for
the trampolines of all links in a map. However, we have recently run
out of space due to the large number of BPF program links. By
allocating additional pages when we exhaust an existing page, we can
accommodate more links in a single map.
The variable st_map->image has been changed to st_map->image_pages,
and its type has been changed to an array of pointers to buffers of
PAGE_SIZE. Additional pages are allocated when all existing pages are
exhausted.
The test case loads a struct_ops maps having 40 programs. Their
trampolines takes about 6.6k+ bytes over 1.5 pages on x86.
---
Major differences from v3:
- Refactor buffer allocations to bpf_struct_ops_tramp_buf_alloc() and
bpf_struct_ops_tramp_buf_free().
Major differences from v2:
- Move image buffer allocation to bpf_struct_ops_prepare_trampoline().
Major differences from v1:
- Always free pages if failing to update.
- Allocate 8 pages at most.
v3: https://lore.kernel.org/all/20240224030302.1500343-1-thinker.li@gmail.com/
v2: https://lore.kernel.org/all/20240221225911.757861-1-thinker.li@gmail.com/
v1: https://lore.kernel.org/all/20240216182828.201727-1-thinker.li@gmail.com/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The BPF struct_ops previously only allowed one page of trampolines.
Each function pointer of a struct_ops is implemented by a struct_ops
bpf program. Each struct_ops bpf program requires a trampoline.
The following selftest patch shows each page can hold a little more
than 20 trampolines.
While one page is more than enough for the tcp-cc usecase,
the sched_ext use case shows that one page is not always enough and hits
the one page limit. This patch overcomes the one page limit by allocating
another page when needed and it is limited to a total of
MAX_IMAGE_PAGES (8) pages which is more than enough for
reasonable usages.
The variable st_map->image has been changed to st_map->image_pages, and
its type has been changed to an array of pointers to pages.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
for_each_property_of_node() is a macro and so doesn't have a stub inline
function for !OF. Move it out of the relevant #ifdef to make it available
to all users.
Fixes: 611cad720148 ("dt: add of_alias_scan and of_alias_get_id")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240303104853.31511-1-brgl@bgdev.pl
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Convert the Atmel AIC binding document to DT schema format using
json-schema.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222090738.41628-1-dharma.b@microchip.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
It turned out that executing the SET_Q_MODE packet on every submission
creates to much overhead.
Implement a workaround which allows skipping the SET_Q_MODE packet if
subsequent submissions all use the same parameters.
v2: add a NULL check for ring_obj
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
First of all calculating the number of dw to patch into a
conditional execution is not something HW generation specific.
This is just standard ring buffer calculations. While at it also
reduce the BUG_ON() into WARN_ON().
Then instead of a random bit pattern use 0 as default value for
the number of dw skipped, this way it's not mandatory any more
to patch the conditional execution.
And last make the address to check a parameter of the
conditional execution instead of getting this from the ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Because the rpm_mode flag is already set when the driver
is initialized, we use it directly for runtime suspend/resume
instead of checking it again
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the pwm_mode value error which used for
pwm1_enable setting
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.
This patch also does logistical changes required for existing usage
of vm->task_info.
V2: Do not block all the prints when task_info not found (Felix)
V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()
V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to check the offset bits for values greater than 255.
v2: also update amdgpu_dm_connector values.
Suggested-by: Mano Ségransan <mano.segransan@protonmail.com>
Tested-by: Mano Ségransan <mano.segransan@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add Display Manager specific changes for DCN3.5.1.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DC support for DCN 3.5.1.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DCN3.5.1 interrupt support.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DMUB support is required to light-up displays.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add register headers for DCN 3.5.1.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add DCN3.5.1 ASIC identifiers.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Raven
fix the issue:
"amdgpu: Failed to create process VM object".
[Why]when amdgpu initialized, seq64 do mampping and update bo mapping in vm page table.
But when clifo run. It also initializes a vm for a process device through the function kfd_process_device_init_vm and ensure the root PD is clean through the function amdgpu_vm_pt_is_root_clean.
So they have a conflict, and clinfo always failed.
v1:
- remove all the pte_supports_ats stuff from the amdgpu_vm code (Felix)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If this is an adapter on a muxed bus segment, assume that each segment
is connected to a subset of the (> 8) overall memory slots. In this
case let's probe the maximum of 8 slots, however stop if the number
of overall populated slots is reached.
If we're not on a muxed segment and the total number of slots is > 8,
then warn because then not all SPD eeproms can be addressed.
Presumably the bus is muxed, but the mux config is missing.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[wsa: removed a superfluous printout]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
ASoC machine driver can use snd_soc_{of_}get_dlc() (A) to get DAI name
for dlc (snd_soc_dai_link_component). In this function call
dlc->dai_name is parsed via snd_soc_dai_name_get() (B).
(A) int snd_soc_get_dlc(...)
{
...
(B) dlc->dai_name = snd_soc_dai_name_get(dai);
...
}
(B) has a priority to return dai->name as dlc->dai_name. In most cases
card can probe successfully. However it has an issue that ASoC tries to
rebind card. Here is a simplified flow for example:
| a) Card probes successfully at first
| b) One of the component bound to this card is removed for some
| reason the component->dev is released
| c) That component is re-registered
v d) ASoC calls snd_soc_try_rebind_card()
a) points dlc->dai_name to dai->name. b) releases all resource of the
old DAI. c) creates new DAI structure. In result d) can not use
dlc->dai_name to add new created DAI.
So it's reasonable that prefer to return dai->driver->name in
snd_soc_dai_name_get() because dai->driver is a pre-defined global
variable. Also update snd_soc_is_matching_dai() for alignment.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240304072128.2845432-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a KUnit test for the cs-amp-lib library. This has test cases
for cs_amp_get_efi_calibration_data() and cs_amp_write_cal_coeffs().
A KUNIT_STATIC_STUB_REDIRECT() has been added to
cs_amp_get_efi_variable() and cs_amp_write_cal_coeff() so that the
KUnit test can redirect these to test harness functions.
Much of the testing involves invoking the same function with different
parameters, i.e. the number of amps and the amp index within the array.
This uses parameterization rather than looping. The idea is to avoid
looping over configurations within one test case as that has a higher
chance of having a bug that doesn't actually test all the expected cases.
Having the test run exactly one configuration, and then tear-down, is less
prone to accidentally skipped configurations.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240304143705.26362-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
This series contains a few small cleanups to the axi-spi-engine driver,
mostly suggested from previous reviews.
|
|
Enable the cbmem driver and dependencies in order to support reading
cbmem entries from the coreboot table, which are used to store logs from
coreboot on arm64 Chromebooks, and provide useful information for
debugging the boot process on those devices.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240304-coreboot-defconfig-v1-1-02dc1940408f@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove the unnecessary semicolon at the end of the for statement.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename all uds_log_* to vdo_log_*.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Also return VDO_SUCCESS from vdo_make_funnel_queue.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Fixes: b46d79bdb82a ("dm vdo: add deduplication index storage interface")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Was only used by sysfs code, can be reinstated if/when needed.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Expose control over dm-vdo's log-level in terms of a module param. It
can be read and written via /sys/module/dm_vdo/parameters/log_level.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Also update target major version number.
All info is (or will be) accessible through alternative interfaces
(e.g. "dmsetup message", module params, etc).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Most should be VDO_SUCCESS. But comparing the return from
kstrtouint() with UDS_SUCCESS (happens to be 0) makes no sense.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
