| Age | Commit message (Collapse) | Author |
|---|
|
Objtool currently only compiles for x86 architectures. This is
fine as it presently does not support tooling for other
architectures. However, we would like to be able to convert other
kernel tools to run as objtool sub commands because they too
process ELF object files. This will allow us to convert tools
such as recordmcount to use objtool's ELF code.
Since much of recordmcount's ELF code is copy-paste code to/from
a variety of other kernel tools (look at modpost for example) this
means that if we can convert recordmcount we can convert more.
We define weak definitions for subcommand entry functions and other weak
definitions for shared functions critical to building existing
subcommands. These return 127 when the command is missing which signify
tools that do not exist on all architectures. In this case the "check"
and "orc" tools do not exist on all architectures so we only add them
for x86. Future changes adding support for "check", to arm64 for
example, can then modify the SUBCMD_CHECK variable when building for
arm64.
Objtool is not currently wired in to KConfig to be built for other
architectures because it's not needed for those architectures and
there are no commands it supports other than those for x86. As more
command support is enabled on various architectures the necessary
KConfig changes can be made (e.g. adding "STACK_VALIDATION") to
trigger building objtool.
[ jpoimboe: remove aliases, add __weak macro, add error messages ]
Cc: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
The BCM2835aux SPI driver uses devm_spi_register_master() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
bcm2835aux_spi_remove() before unregistering the SPI controller via
devres_release_all().
This order is incorrect: bcm2835aux_spi_remove() turns off the SPI
controller, including its interrupts and clock. The SPI controller
is thus no longer usable.
When the SPI controller is subsequently unregistered, it unbinds all
its slave devices. If their drivers need to access the SPI bus,
e.g. to quiesce their interrupts, unbinding will fail.
As a rule, devm_spi_register_master() must not be used if the
->remove() hook performs teardown steps which shall be performed
after unbinding of slaves.
Fix by using the non-devm variant spi_register_master(). Note that the
struct spi_master as well as the driver-private data are not freed until
after bcm2835aux_spi_remove() has finished, so accessing them is safe.
Fixes: 1ea29b39f4c8 ("spi: bcm2835aux: add bcm2835 auxiliary spi device driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.4+
Cc: Martin Sperl <kernel@martin.sperl.org>
Link: https://lore.kernel.org/r/32f27f4d8242e4d75f9a53f7e8f1f77483b08669.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The BCM2835 SPI driver uses devm_spi_register_controller() on bind.
As a consequence, on unbind, __device_release_driver() first invokes
bcm2835_spi_remove() before unregistering the SPI controller via
devres_release_all().
This order is incorrect: bcm2835_spi_remove() tears down the DMA
channels and turns off the SPI controller, including its interrupts
and clock. The SPI controller is thus no longer usable.
When the SPI controller is subsequently unregistered, it unbinds all
its slave devices. If their drivers need to access the SPI bus,
e.g. to quiesce their interrupts, unbinding will fail.
As a rule, devm_spi_register_controller() must not be used if the
->remove() hook performs teardown steps which shall be performed
after unbinding of slaves.
Fix by using the non-devm variant spi_register_controller(). Note that
the struct spi_controller as well as the driver-private data are not
freed until after bcm2835_spi_remove() has finished, so accessing them
is safe.
Fixes: 247263dba208 ("spi: bcm2835: use devm_spi_register_master()")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.13+
Link: https://lore.kernel.org/r/2397dd70cdbe95e0bc4da2b9fca0f31cb94e5aed.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When an SPI controller unregisters, it unbinds all its slave devices.
For this, their drivers may need to access the SPI bus, e.g. to quiesce
interrupts.
However since commit ffbbdd21329f ("spi: create a message queueing
infrastructure"), spi_destroy_queue() is executed before unbinding the
slaves. It sets ctlr->running = false, thereby preventing SPI bus
access and causing unbinding of slave devices to fail.
Fix by unbinding slaves before calling spi_destroy_queue().
Fixes: ffbbdd21329f ("spi: create a message queueing infrastructure")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.4+
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/8aaf9d44c153fe233b17bc2dec4eb679898d7e7b.1589557526.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The objtool_file structure describes the files objtool works on,
is used by the check subcommand, and the check.h header is included
by the orc subcommands so it's presently used by all subcommands.
Since the structure will be useful in all subcommands besides check,
and some subcommands may not want to include check.h to get the
definition, split the structure out into a new header meant for use
by all objtool subcommands.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
When the user requests help it's not an error so do not exit with
a non-zero exit code. This is not especially useful for a user but
any script that might wish to check that objtool --help is at least
available can't rely on the exit code to crudely check that, for
example, building an objtool executable succeeds.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
check_kcov_mode() is called by write_comp_data() and
__sanitizer_cov_trace_pc(), which are already on the uaccess safe list.
It's notrace and doesn't call out to anything else, so add it to the
list too.
This fixes the following warnings:
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0x15: call to check_kcov_mode() with UACCESS enabled
kernel/kcov.o: warning: objtool: write_comp_data()+0x1b: call to check_kcov_mode() with UACCESS enabled
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Enable objtool coverage for the sample ftrace modules by adding ELF
annotations to the asm trampoline functions.
samples/ftrace/ftrace-direct.o: warning: objtool: .text+0x0: unreachable instruction
samples/ftrace/ftrace-direct-modify.o: warning: objtool: .text+0x0: unreachable instruction
samples/ftrace/ftrace-direct-too.o: warning: objtool: .text+0x0: unreachable instruction
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
In io_sq_thread(), currently if we get an -EBUSY error and go to sleep,
we will won't clear it again, which will result in io_sq_thread() will
never have a chance to submit sqes again. Below test program test.c
can reveal this bug:
int main(int argc, char *argv[])
{
struct io_uring ring;
int i, fd, ret;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec *iovecs;
void *buf;
struct io_uring_params p;
if (argc < 2) {
printf("%s: file\n", argv[0]);
return 1;
}
memset(&p, 0, sizeof(p));
p.flags = IORING_SETUP_SQPOLL;
ret = io_uring_queue_init_params(4, &ring, &p);
if (ret < 0) {
fprintf(stderr, "queue_init: %s\n", strerror(-ret));
return 1;
}
fd = open(argv[1], O_RDONLY | O_DIRECT);
if (fd < 0) {
perror("open");
return 1;
}
iovecs = calloc(10, sizeof(struct iovec));
for (i = 0; i < 10; i++) {
if (posix_memalign(&buf, 4096, 4096))
return 1;
iovecs[i].iov_base = buf;
iovecs[i].iov_len = 4096;
}
ret = io_uring_register_files(&ring, &fd, 1);
if (ret < 0) {
fprintf(stderr, "%s: register %d\n", __FUNCTION__, ret);
return ret;
}
for (i = 0; i < 10; i++) {
sqe = io_uring_get_sqe(&ring);
if (!sqe)
break;
io_uring_prep_readv(sqe, 0, &iovecs[i], 1, 0);
sqe->flags |= IOSQE_FIXED_FILE;
ret = io_uring_submit(&ring);
sleep(1);
printf("submit %d\n", i);
}
for (i = 0; i < 10; i++) {
io_uring_wait_cqe(&ring, &cqe);
printf("receive: %d\n", i);
if (cqe->res != 4096) {
fprintf(stderr, "ret=%d, wanted 4096\n", cqe->res);
ret = 1;
}
io_uring_cqe_seen(&ring, cqe);
}
close(fd);
io_uring_queue_exit(&ring);
return 0;
}
sudo ./test testfile
above command will hang on the tenth request, to fix this bug, when io
sq_thread is waken up, we reset the variable 'ret' to be zero.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use %ptT instead of open coded variant to print content of
time64_t type in human readable format.
Link: https://lore.kernel.org/r/20200415170046.33374-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Rewieved-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Use %ptT instead of open coded variant to print content of
time64_t type in human readable format.
Link: https://lore.kernel.org/r/20200415170046.33374-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Rewieved-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
There are users which print time and date represented by content of
time64_t type in human readable format.
Instead of open coding that each time introduce %ptT[dt][r] specifier.
Few test cases for %ptT specifier has been added as well.
Link: https://lore.kernel.org/r/20200415170046.33374-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Rewieved-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
This reverts commit 697ece78f8f749aeea40f2711389901f0974017a.
The implementation of SWAP on powerpc requires page protection
bits to not be one of the least significant PTE bits.
Until the SWAP implementation is changed and this requirement voids,
we have to keep at least _PAGE_RW outside of the 3 last bits.
For now, revert to previous PTE bits order. A further rework
may come later.
Fixes: 697ece78f8f7 ("powerpc/32s: reorder Linux PTE bits to better match Hash PTE bits.")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b34706f8de87f84d135abb5f3ede6b6f16fb1f41.1589969799.git.christophe.leroy@csgroup.eu
|
|
We need to preserve the "iio_evgen->irq_sim_domain" error code before
we free "iio_evgen" otherwise it leads to a use after free.
Fixes: 337cbeb2c13e ("genirq/irq_sim: Simplify the API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Quoth the man page:
```
If the tracee was restarted by PTRACE_SYSCALL or PTRACE_SYSEMU, the
tracee enters syscall-enter-stop just prior to entering any system
call (which will not be executed if the restart was using
PTRACE_SYSEMU, regardless of any change made to registers at this
point or how the tracee is restarted after this stop).
```
The parenthetical comment is currently true on x86 and powerpc,
but not currently true on arm64. arm64 re-checks the _TIF_SYSCALL_EMU
flag after the syscall entry ptrace stop. However, at this point,
it reflects which method was used to re-start the syscall
at the entry stop, rather than the method that was used to reach it.
Fix that by recording the original flag before performing the ptrace
stop, bringing the behavior in line with documentation and x86/powerpc.
Fixes: f086f67485c5 ("arm64: ptrace: add support for syscall emulation")
Cc: <stable@vger.kernel.org> # 5.3.x-
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Bin Lu <Bin.Lu@arm.com>
[catalin.marinas@arm.com: moved 'flags' bit masking]
[catalin.marinas@arm.com: changed 'flags' type to unsigned long]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When mapping a LPI, the ITS driver picks the first possible
affinity, which is in most cases CPU0, assuming that if
that's not suitable, someone will come and set the affinity
to something more interesting.
It apparently isn't the case, and people complain of poor
performance when many interrupts are glued to the same CPU.
So let's place the interrupts by finding the "least loaded"
CPU (that is, the one that has the fewer LPIs mapped to it).
So called 'managed' interrupts are an interesting case where
the affinity is actually dictated by the kernel itself, and
we should honor this.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1575642904-58295-1-git-send-email-john.garry@huawei.com
Link: https://lore.kernel.org/r/20200515165752.121296-3-maz@kernel.org
|
|
The Gateworks System Controller has a hwmon sub-component that exposes
up to 16 ADC's, some of which are temperature sensors, others which are
voltage inputs. The ADC configuration (register mapping and name) is
configured via device-tree and varies board to board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The Gateworks System Controller (GSC) is an I2C slave controller
implemented with an MSP430 micro-controller whose firmware embeds the
following features:
- I/O expander (16 GPIO's) using PCA955x protocol
- Real Time Clock using DS1672 protocol
- User EEPROM using AT24 protocol
- HWMON using custom protocol
- Interrupt controller with tamper detect, user pushbotton
- Watchdog controller capable of full board power-cycle
- Power Control capable of full board power-cycle
see http://trac.gateworks.com/wiki/gsc for more details
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This patch adds documentation of device-tree bindings for the
Gateworks System Controller (GSC).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507185323.GA14416@embeddedor
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
None of the things mentioned in the comment is initialized in hv_init.
They've been moved elsewhere.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200506160806.118965-1-wei.liu@kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
|
|
uuid_le is an alias for guid_t and is going to be removed in the future.
Replace it with original type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200423134505.78221-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
printf() like functions in the kernel have extensions, such as
%*phN to dump small pieces of memory as hex values.
Replace print_alias_name() with the direct use of %*phN.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200423134505.78221-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Drop dereference when printing the GUID with printf() like functions.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200423134505.78221-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This is a follow up to the commit 1d3c9c075462
("hyper-v: Use UUID API for exporting the GUID")
which starts the conversion.
There is export_guid() function which exports guid_t to the u8 array.
Use it instead of open coding variant.
This allows to hide the uuid_t internals.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200423134505.78221-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add definitions for GetVpRegister and SetVpRegister hypercalls, which
are implemented for both x86 and ARM64.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200422195737.10223-5-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In preparation for adding ARM64 support, split hyperv-tlfs.h into
architecture dependent and architecture independent files, similar
to what has been done with mshyperv.h. Move architecture independent
definitions into include/asm-generic/hyperv-tlfs.h. The split will
avoid duplicating significant lines of code in the ARM64 version of
hyperv-tlfs.h. The split has no functional impact.
Some of the common definitions have "X64" in the symbol name. Change
these to remove the "X64" in the architecture independent version of
hyperv-tlfs.h, but add aliases with the "X64" in the x86 version so
that x86 code will continue to compile. A later patch set will
change all the references and allow removal of the aliases.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200422195737.10223-4-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The HV_PROCESSOR_POWER_STATE_C<n> #defines date back to year 2010,
but they are not in the TLFS v6.0 document and are not used anywhere
in Linux. Remove them.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200422195737.10223-3-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The Hyper-V Reference TSC Page structure is defined twice. struct
ms_hyperv_tsc_page has padding out to a full 4 Kbyte page size. But
the padding is not needed because the declaration includes a union
with HV_HYP_PAGE_SIZE. KVM uses the second definition, which is
struct _HV_REFERENCE_TSC_PAGE, because it does not have the padding.
Fix the duplication by removing the padding from ms_hyperv_tsc_page.
Fix up the KVM code to use it. Remove the no longer used struct
_HV_REFERENCE_TSC_PAGE.
There is no functional change.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20200422195737.10223-2-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The pointer primary_channel is being assigned with a value that is never
used. The assignment is redundant and can be removed. Move the
definition of primary_channel to a narrower scope.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200414152343.243166-1-colin.king@canonical.com
[ wei: move primary_channel and update commit message ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
For each storvsc_device, storvsc keeps track of the channel target CPUs
associated to the device (alloced_cpus) and it uses this information to
fill a "cache" (stor_chns) mapping CPU->channel according to a certain
heuristic. Update the alloced_cpus mask and the stor_chns array when a
channel of the storvsc device is re-assigned to a different CPU.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Link: https://lore.kernel.org/r/20200406001514.19876-12-parri.andrea@gmail.com
Reviewed-by; Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[ wei: fix a small issue reported by kbuild test robot <lkp@intel.com> ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The SDEI handler save/restores the addr_limit using set_fs(). It isn't
very clear why. The reason is to mirror the arch code's entry assembly.
The arch code does this because perf may access user-space, and
inheriting the addr_limit may be a problem.
Add a comment explaining why this is here.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=822
Link: https://lore.kernel.org/r/20200519182108.13693-4-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The export symbols to register/unregister and enable/disable events
aren't used upstream, remove them.
[ dropped the parts of Christoph's patch that made the API static too ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200504164224.2842960-1-hch@lst.de/
Link: https://lore.kernel.org/r/20200519182108.13693-3-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used for runtime after the initialization
to release the table mapping, put the SDEI table after using it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/1589021566-46373-1-git-send-email-guohanjun@huawei.com/
Link: https://lore.kernel.org/r/20200519182108.13693-2-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
On s390, the layout of normal and large ptes (i.e. pmds/puds) differs.
Therefore, set_huge_pte_at() does a conversion from a normal pte to
the corresponding large pmd/pud. So, when converting an empty pte, this
should result in an empty pmd/pud, which would return true for
pmd/pud_none().
However, after conversion we also mark the pmd/pud as large, and
therefore present. For empty ptes, this will result in an empty pmd/pud
that is also marked as large, and pmd/pud_none() would not return true.
There is currently no issue with this behaviour, as set_huge_pte_at()
does not seem to be called for empty ptes. It would be valid though, so
let's fix this by not marking empty ptes as large in set_huge_pte_at().
This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add more arch page table helper
tests").
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
|
|
rcuwait_active only returns whether w->task is not NULL. This is
exactly one of the usecases that are mentioned in the documentation
for rcu_access_pointer() where it is correct to bypass lockdep checks.
This avoids a splat from kvm_vcpu_on_spin().
Reported-by: Wanpeng Li <kernellwp@gmail.com>
Tested-by: Wanpeng Li <kernellwp@gmail.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add missing include which adds the prototype to plat_time_init().
Fixes: f932449c11da ("MIPS: ingenic: Drop obsolete code, merge the rest in setup.c")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After commit 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip"),
the related includes and comment about ioc3 are not used any more in
ip27-timer.c, remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915: Show per-engine default property values in sysfs
By providing the default values configured into the kernel via sysfs, it
is much more convenient for userspace to restore those sane defaults, or
at least know what are considered good baseline. This is useful, for
example, to cleanup after any failed userspace prior to commencing new
jobs.
Cross-subsystem Changes:
- video/hdmi: Add Unpack only function for DRM infoframe
- Includes pull request gvt-next-2020-05-12
Driver Changes:
- Restore Cherryview back to full-ppgtt (Chris, Mika)
- Document locking guidelines for i915 (Chris, Daniel, Joonas)
- Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris)
- Display WA #1105: Require linear fb stride to be multiple of 512 bytes on
gen9/glk (Ville)
- Add Wa_14010685332 for ICP/ICL (Matt R)
- Restrict w/a 1607087056 for EHL/JSL (Swathi)
- Fix interrupt handling for DP AUX transactions on Tigerlake (Imre)
- Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika)
- Fix HDC pipeline flush hardware bit on Gen12 (Mika)
- Flush L3 when flushing render on Gen12 (Mika)
- Invalidate aux table entries forcibly between BB on Gen12 (Mika)
- Add aux table invalidate for all engines on Gen12 (Mika)
- Force pte cacheline to main memory Gen8+ (Mika)
- Add and enable TGL+ SAGV support (Stanislav)
- Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian)
- Replace zero-length array with flexible-array (Gustavo)
- Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris)
- Remove wait priority boosting (Chris)
- Keep driver module referenced when PMU is active (Chris)
- Sanitize RPS interrupts upon resume (Chris)
- Extend pcode read timeout to 20 ms (Chris)
- Wait for ACT sent before enabling MST pipe (Ville)
- Extend support to async relocations to SNB (Chris)
- Remove CNL pre-prod workarounds (Ville)
- Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan)
- Record the active CCID from before reset (Chris)
- Mark concurrent submissions with a weak-dependency (Chris)
- Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel)
- Prevent using semaphores to chain up to external fences (Chris)
- Fix GLK watermark calculations (Ville)
- Emit await(batch) before MI_BB_START (Chris)
- Reset execlists registers before HWSP (Chris)
- Drop no-semaphore boosting in favor of fast timeslicing (Chris)
- Fix enabled infoframe states of lspcon (Gwan-gyeong)
- Program DP SDPs on pipe updates (Gwan-gyeong)
- Stop sending DP SDPs on ddi disable (Gwan-gyeong)
- Store CS timestamp frequency in Hz (Ville)
- Remove unused HAS_FWTABLE macro (Pascal)
- Use batchbuffer chaining for relocations to save ring space (Chris)
- Try different engines for relocs if MI ops not supported (Chris, Tvrtko)
- Lazily acquire the device wakeref for freeing objects (Chris)
- Streamline display code arithmetics around rounding etc. (Ville)
- Use bw state for per crtc SAGV evaluation (Stanislav)
- Track active_pipes in bw_state (Stanislav)
- Nuke mode.vrefresh usage (Ville)
- Warn if the FBC is still writing to stolen on removal (Chris)
- Added new PCode commands prepping for QGV rescricting (Stansilav)
- Stop holding onto the pinned_default_state (Chris)
- Propagate error from completed fences (Chris)
- Ignore submit-fences on the same timeline (Chris)
- Pull waiting on an external dma-fence into its routine (Chris)
- Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris)
- Mark up the racy read of execlists->context_tag (Chris)
- Tidy up the return handling for completed dma-fences (Chris)
- Introduce skl_plane_wm_level accessor (Stanislav)
- Extract SKL SAGV checking (Stanislav)
- Make active_pipes check skl specific (Stanislav)
- Suspend tasklets before resume sanitization (Chris)
- Remove redundant exec_fence (Chris)
- Mark the addition of the initial-breadcrumb in the request (Chris)
- Transfer old virtual breadcrumbs to irq_worker (Chris)
- Read the DP SDPs from the video DIP (Gwan-gyeong)
- Program DP SDPs with computed configs (Gwan-gyeong)
- Add state readout for DP VSC and DP HDR Metadata Infoframe SDP
(Gwan-gyeong)
- Add compute routine for DP PSR VSC SDP (Gwan-gyeong)
- Use new DP VSC SDP compute routine on PSR (Gwan-gyeong)
- Restrict qgv points which don't have enough bandwidth. (Stanislav)
- Nuke pointless div by 64bit (Ville)
- Static checker code fixes (Nathan, Mika, Chris)
- Add logging function for DP VSC SDP (Gwan-gyeong)
- Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the
crtc state dump (Gwan-gyeong)
- Make timeslicing explicit engine property (Chris, Tvrtko)
- Selftest and debugging improvements (Chris)
- Align variable names with BSpec (Ville)
- Tidy up gen8+ breadcrumb emission code (Chris)
- Turn intel_digital_port_connected() in a vfunc (Ville)
- Use stashed away hpd isr bits in intel_digital_port_connected() (Ville)
- Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.8-2020-05-19:
amdgpu:
- Improved handling for CTF (Critical Thermal Fault) situations
- Clarify AC/DC mode switches
- SR-IOV fixes
- XGMI fixes for RAS
- Misc cleanups
- Add autodump debugfs node to aid in GPU hang debugging
UAPI:
- Add a MEM_SYNC IB flag for handling proper acquire memory semantics if UMDs expect the kernel to handle this
Used by AMDVLK: https://github.com/GPUOpen-Drivers/pal/blob/dev/src/core/os/amdgpu/amdgpuQueue.cpp#L1262
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519202505.4126-1-alexander.deucher@amd.com
|
|
We normally disable any commands that aren't specifically poll commands
for a ring that is setup for polling, but we do allow buffer provide and
remove commands to support buffer selection for polled IO. Once a
request is issued, we add it to the poll list to poll for completion. But
we should not do that for non-IO commands, as those request complete
inline immediately and aren't pollable. If we do, we can leave requests
on the iopoll list after they are freed.
Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a quirk for the Oculus Rift S OVR0012 display so
it shows up as a non-desktop display.
Signed-off-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507180628.740936-1-jan@centricular.com
|
|
skb_gro_receive() used to be used by SCTP, it is no longer the case.
skb_gro_receive_list() is in the same category : never used from modules.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid LDB and IPU DI clocks both using the same parent. LDB requires
pasthrough clock to avoid breaking timing while IPU DI does not.
Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent
and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.
This fixes an issue where attempting atomic modeset while using
HDMI and display port at the same time causes LDB clock programming
to destroy the programming of HDMI that was done during the same
modeset.
Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
originally chosen by Robert Beckett to avoid affecting eMMC clock
by DRM atomic updates]
Signed-off-by: Ian Ray <ian.ray@ge.com>
[Squash Robert's and Ian's commits for bisectability, update patch
description and add stable tag]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://people.freedesktop.org/~sroland/linux into drm-fixes
vmwgfx:
- change maintainers
- fix redundant assignment
- fix parameter name
- fix return value
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516050433.7298-1-rscheidegger.oss@gmail.com
|
|
When kobject_init_and_add() returns an error in the function
qib_create_port_files(), the function kobject_put() is not called for the
corresponding kobject, which potentially leads to memory leak.
This patch fixes the issue by calling kobject_put() even if
kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released
along with other kobjects when the sysfs is unregistered.
Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Suggested-by: Lin Yi <teroincn@gmail.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull vfs fix from Al Viro:
"Stable fodder fix: copy_fdtable() would get screwed on 64bit boxen
with sysctl_nr_open raised to 512M or higher, which became possible
since 2.6.25.
Nobody sane would set the things up that way, but..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix multiplication overflow in copy_fdtable()
|
|
Tx data FIFO Head/Tail, Saved and Packet Count registers
not applicable for i225 LAN controller.
This patch comes to clean up these registers.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
