| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more driver specific fixes.
The DesignWare fix is for an issue introduced by conversion to the
chip select accessor functions and is pretty important but the other
two are less severe"
* tag 'spi-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: Replace incorrect spi_get_chipselect with set
spi: fsl-dspi: avoid SCK glitches with continuous transfers
spi: cadence-quadspi: Add missing check for dma_set_mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"The set of regulators described for the Qualcomm PM8550 just seems to
have been completely wrong and would likely not have worked at all if
anything tried to actually configure anything except for enabling and
disabling at runtime"
* tag 'regulator-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: Fix regulators for PM8550
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Another fix for the maple tree cache, Takashi noticed that unlike
other caches the maple tree cache didn't check for read only registers
before trying to sync which would result in spurious syncs for read
only registers where we don't have a default.
This was due to the check being open coded in the caches, we now check
in the shared 'does this register need sync' function so that is fixed
for this and future caches"
* tag 'regmap-fix-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache: Don't sync read-only registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A fix for dvb-core to avoid a race condition during DVB board
registration"
* tag 'media/v6.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: dvb-core: Fix use-after-free on race condition at dvb_frontend"
|
|
This seems to have existed for ever but is now more apparant after
commit 9bff18d13473 ("drm/ttm: use per BO cleanup workers")
My analysis: two threads are running, one in the irq signalling the
fence, in dma_fence_signal_timestamp_locked, it has done the
DMA_FENCE_FLAG_SIGNALLED_BIT setting, but hasn't yet reached the
callbacks.
The second thread in nouveau_cli_work_ready, where it sees the fence is
signalled, so then puts the fence, cleanups the object and frees the
work item, which contains the callback.
Thread one goes again and tries to call the callback and causes the
use-after-free.
Proposed fix: lock the fence signalled check in nouveau_cli_work_ready,
so either the callbacks are done or the memory is freed.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Fixes: 11e451e74050 ("drm/nouveau: remove fence wait code from deferred client work handler")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/20230615024008.1600281-1-airlied@gmail.com/
|
|
* kvm-arm64/ampere1-hafdbs-mitigation:
: AmpereOne erratum AC03_CPU_38 mitigation
:
: AmpereOne does not advertise support for FEAT_HAFDBS due to an
: underlying erratum in the feature. The associated control bits do not
: have RES0 behavior as required by the architecture.
:
: Introduce mitigations to prevent KVM from enabling the feature at
: stage-2 as well as preventing KVM guests from enabling HAFDBS at
: stage-1.
KVM: arm64: Prevent guests from enabling HA/HD on Ampere1
KVM: arm64: Refactor HFGxTR configuration into separate helpers
arm64: errata: Mitigate Ampere1 erratum AC03_CPU_38 at stage-2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
An erratum in the HAFDBS implementation in AmpereOne was addressed by
clearing the feature in the ID register, with the expectation that
software would not attempt to use the corresponding controls in TCR_EL1.
The architecture, on the other hand, takes a much more pedantic stance
on the subject, requiring the TCR bits behave as RES0.
Take an extremely conservative stance on the issue and leverage the
precise write trap afforded by FGT. Handle guest writes by clearing HA
and HD before writing the intended value to the EL1 register alias.
Link: https://lore.kernel.org/r/20230609220104.1836988-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
A subsequent change will need to flip more trap bits in HFGWTR_EL2. Make
room for this by factoring out the programming of the HFGxTR registers
into helpers and using locals to build the set/clear masks.
Link: https://lore.kernel.org/r/20230609220104.1836988-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
AmpereOne has an erratum in its implementation of FEAT_HAFDBS that
required disabling the feature on the design. This was done by reporting
the feature as not implemented in the ID register, although the
corresponding control bits were not actually RES0. This does not align
well with the requirements of the architecture, which mandates these
bits be RES0 if HAFDBS isn't implemented.
The kernel's use of stage-1 is unaffected, as the HA and HD bits are
only set if HAFDBS is detected in the ID register. KVM, on the other
hand, relies on the RES0 behavior at stage-2 to use the same value for
VTCR_EL2 on any cpu in the system. Mitigate the non-RES0 behavior by
leaving VTCR_EL2.HA clear on affected systems.
Cc: stable@vger.kernel.org
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Acked-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609220104.1836988-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-06-14:
amdgpu:
- GFX9 preemption fixes
- Add missing radeon secondary PCI ID
- vblflash fixes
- SMU 13 fix
- VCN 4.0 fix
- Re-enable TOPDOWN flag for large BAR systems to fix regression
- eDP fix
- PSR hang fix
- DPIA fix
radeon:
- fbdev client warning fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615024011.7773-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix two regressions in ext4, one report by syzkaller[1], and reported
by multiple users (and tracked by regzbot[2])"
[1] https://syzkaller.appspot.com/bug?extid=4acc7d910e617b360859
[2] https://linux-regtracking.leemhuis.info/regzbot/regression/ZIauBR7YiV3rVAHL@glitch/
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: drop the call to ext4_error() from ext4_get_group_info()
Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"
|
|
Pull smb client fixes from Steve French:
"Eight, mostly small, smb3 client fixes:
- important fix for deferred close oops (race with unmount) found
with xfstest generic/098 to some servers
- important reconnect fix
- fix problem with max_credits mount option
- two multichannel (interface related) fixes
- one trivial removal of confusing comment
- two small debugging improvements (to better spot crediting
problems)"
* tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add a warning when the in-flight count goes negative
cifs: fix lease break oops in xfstest generic/098
cifs: fix max_credits implementation
cifs: fix sockaddr comparison in iface_cmp
smb/client: print "Unknown" instead of bogus link speed value
cifs: print all credit counters in DebugData
cifs: fix status checks in cifs_tree_connect
smb: remove obsolete comment
|
|
Kuniyuki Iwashima says:
====================
udplite/dccp: Print deprecation notice.
UDP-Lite is assumed to have no users for 7 years, and DCCP is
orphaned for 7 years too.
Let's add deprecation notice and see if anyone responds to it.
====================
Link: https://lore.kernel.org/r/20230614194705.90673-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DCCP was marked as Orphan in the MAINTAINERS entry 2 years ago in commit
054c4610bd05 ("MAINTAINERS: dccp: move Gerrit Renker to CREDITS"). It says
we haven't heard from the maintainer for five years, so DCCP is not well
maintained for 7 years now.
Recently DCCP only receives updates for bugs, and major distros disable it
by default.
Removing DCCP would allow for better organisation of TCP fields to reduce
the number of cache lines hit in the fast path.
Let's add a deprecation notice when DCCP socket is created and schedule its
removal to 2025.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.
Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app. Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.
Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.
Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.
Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.
Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.
Reported-by: Jose Abreu <Jose.Abreu@synopsys.com>
Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to nla_parse_nested_deprecated(), the tb[] is supposed to the
destination array with maxtype+1 elements. In current
tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used
which is unnecessary. This patch resize them to a proper size.
Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api")
Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split abnormal IO in terms of the corresponding operation specific
max_sectors (max_discard_sectors, max_secure_erase_sectors or
max_write_zeroes_sectors).
This fixes a significant dm-thinp discard performance regression that
was introduced with commit e2dd8aca2d76 ("dm bio prison v1: improve
concurrent IO performance"). Relative to discard: max_discard_sectors
is used instead of max_sectors; which fixes excessive discard splitting
(e.g. max_sectors=128K vs max_discard_sectors=64M).
Tested by discarding an 1 Petabyte dm-thin device:
lvcreate -V 1125899906842624B -T test/pool -n thin
time blkdiscard /dev/test/thin
Before this fix (splitting discards every 128K): ~116m
After this fix (splitting discards every 64M) : 0m33.460s
Reported-by: Zorro Lang <zlang@redhat.com>
Fixes: 06961c487a33 ("dm: split discards further if target sets max_discard_granularity")
Requires: 13f6facf3fae ("dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE")
Fixes: e2dd8aca2d76 ("dm bio prison v1: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.
Commit 3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:
Before commit 3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Must check pmd->fail_io before using pmd->data_sm since
pmd->data_sm may be destroyed by other processes.
P1(kworker) P2(message)
do_worker
process_prepared
process_prepared_discard_passdown_pt2
dm_pool_dec_data_range
pool_message
commit
dm_pool_commit_metadata
↓
// commit failed
metadata_operation_failed
abort_transaction
dm_pool_abort_metadata
__open_or_format_metadata
↓
dm_sm_disk_open
↓
// open failed
// pmd->data_sm is NULL
dm_sm_dec_blocks
↓
// try to access pmd->data_sm --> UAF
As shown above, if dm_pool_commit_metadata() and
dm_pool_abort_metadata() fail in pool_message process, kworker may
trigger UAF.
Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().
This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().
Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Since commit 955fb8719efb ("thermal/intel/intel_soc_dts_iosf: Use Intel
TCC library") intel_soc_dts_iosf is reporting the wrong temperature.
The driver expects tj_max to be in milli-degrees-celcius but after
the switch to the TCC library this is now in degrees celcius so
instead of e.g. 90000 it is set to 90 causing a temperature 45
degrees below tj_max to be reported as -44910 milli-degrees
instead of as 45000 milli-degrees.
Fix this by adding back the lost factor of 1000.
Fixes: 955fb8719efb ("thermal/intel/intel_soc_dts_iosf: Use Intel TCC library")
Reported-by: Bernhard Krug <b.krug@elektronenpumpe.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The addition of might_sleep() to down_timeout() caused the latter to
enable interrupts unconditionally in some cases, which in turn broke
the ACPI S3 wakeup path in acpi_suspend_enter(), where down_timeout()
is called by acpi_disable_all_gpes() via acpi_ut_acquire_mutex().
Namely, if CONFIG_DEBUG_ATOMIC_SLEEP is set, might_sleep() causes
might_resched() to be used and if CONFIG_PREEMPT_VOLUNTARY is set,
this triggers __cond_resched() which may call preempt_schedule_common(),
so __schedule() gets invoked and it ends up with enabled interrupts (in
the prev == next case).
Now, enabling interrupts early in the S3 wakeup path causes the kernel
to crash.
Address this by modifying acpi_suspend_enter() to disable GPEs without
attempting to acquire the sleeping lock which is not needed in that code
path anyway.
Fixes: 99409b935c9a ("locking/semaphore: Add might_sleep() to down_*() family")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
|
|
Now spi_geni_grab_gpi_chan() errors are correctly reported, the
-EPROBE_DEFER error should be returned from probe in case the
GPI dma driver is built as module and/or not probed yet.
Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Fixes: 6532582c353f ("spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230615-topic-sm8550-upstream-fix-spi-geni-qcom-probe-v2-1-670c3d9e8c9c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Avoid trapping CTR_EL0 on systems with FEAT_EVT, as the register is
: commonly read by userspace
:
: - Make use of FEAT_BTI at hyp stage-1, setting the Guard Page bit to 1
: for executable mappings
:
: - Use a separate set of pointer authentication keys for the hypervisor
: when running in protected mode (i.e. pKVM)
:
: - Plug a few holes in timer initialization where KVM fails to free the
: timer IRQ(s)
KVM: arm64: Use different pointer authentication keys for pKVM
KVM: arm64: timers: Fix resource leaks in kvm_timer_hyp_init()
KVM: arm64: Use BTI for nvhe
KVM: arm64: Relax trapping of CTR_EL0 when FEAT_EVT is available
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/configurable-id-regs:
: Configurable ID register infrastructure, courtesy of Jing Zhang
:
: Create generalized infrastructure for allowing userspace to select the
: supported feature set for a VM, so long as the feature set is a subset
: of what hardware + KVM allows. This does not add any new features that
: are user-configurable, and instead focuses on the necessary refactoring
: to enable future work.
:
: As a consequence of the series, feature asymmetry is now deliberately
: disallowed for KVM. It is unlikely that VMMs ever configured VMs with
: asymmetry, nor does it align with the kernel's overall stance that
: features must be uniform across all cores in the system.
:
: Furthermore, KVM incorrectly advertised an IMP_DEF PMU to guests for
: some time. Migrations from affected kernels was supported by explicitly
: allowing such an ID register value from userspace, and forwarding that
: along to the guest. KVM now allows an IMP_DEF PMU version to be restored
: through the ID register interface, but reinterprets the user value as
: not implemented (0).
KVM: arm64: Rip out the vestiges of the 'old' ID register scheme
KVM: arm64: Handle ID register reads using the VM-wide values
KVM: arm64: Use generic sanitisation for ID_AA64PFR0_EL1
KVM: arm64: Use generic sanitisation for ID_(AA64)DFR0_EL1
KVM: arm64: Use arm64_ftr_bits to sanitise ID register writes
KVM: arm64: Save ID registers' sanitized value per guest
KVM: arm64: Reuse fields of sys_reg_desc for idreg
KVM: arm64: Rewrite IMPDEF PMU version as NI
KVM: arm64: Make vCPU feature flags consistent VM-wide
KVM: arm64: Relax invariance of KVM_ARM_VCPU_POWER_OFF
KVM: arm64: Separate out feature sanitisation and initialisation
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* for-next/module-alloc:
: Drag in module VA rework to handle conflicts w/ sw feature refactor
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/hvhe:
: Support for running split-hypervisor w/VHE, courtesy of Marc Zyngier
:
: From the cover letter:
:
: KVM (on ARMv8.0) and pKVM (on all revisions of the architecture) use
: the split hypervisor model that makes the EL2 code more or less
: standalone. In the later case, we totally ignore the VHE mode and
: stick with the good old v8.0 EL2 setup.
:
: We introduce a new "mode" for KVM called hVHE, in reference to the
: nVHE mode, and indicating that only the hypervisor is using VHE.
KVM: arm64: Fix hVHE init on CPUs where HCR_EL2.E2H is not RES1
arm64: Allow arm64_sw.hvhe on command line
KVM: arm64: Force HCR_E2H in guest context when ARM64_KVM_HVHE is set
KVM: arm64: Program the timer traps with VHE layout in hVHE mode
KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration
KVM: arm64: Adjust EL2 stage-1 leaf AP bits when ARM64_KVM_HVHE is set
KVM: arm64: Disable TTBR1_EL2 when using ARM64_KVM_HVHE
KVM: arm64: Force HCR_EL2.E2H when ARM64_KVM_HVHE is set
KVM: arm64: Key use of VHE instructions in nVHE code off ARM64_KVM_HVHE
KVM: arm64: Remove alternatives from sysreg accessors in VHE hypervisor context
arm64: Use CPACR_EL1 format to set CPTR_EL2 when E2H is set
arm64: Allow EL1 physical timer access when running VHE
arm64: Don't enable VHE for the kernel if OVERRIDE_HVHE is set
arm64: Add KVM_HVHE capability and has_hvhe() predicate
arm64: Turn kaslr_feature_override into a generic SW feature override
arm64: Prevent the use of is_kernel_in_hyp_mode() in hypervisor code
KVM: arm64: Drop is_kernel_in_hyp_mode() from __invalidate_icache_guest_page()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/ffa-proxy:
: pKVM FF-A Proxy, courtesy Will Deacon and Andrew Walbran
:
: From the cover letter:
:
: pKVM's primary goal is to protect guest pages from a compromised host by
: enforcing access control restrictions using stage-2 page-tables. Sadly,
: this cannot prevent TrustZone from accessing non-secure memory, and a
: compromised host could, for example, perform a 'confused deputy' attack
: by asking TrustZone to use pages that have been donated to protected
: guests. This would effectively allow the host to have TrustZone
: exfiltrate guest secrets on its behalf, hence breaking the isolation
: that pKVM intends to provide.
:
: This series addresses this problem by providing pKVM with the ability to
: monitor SMCs following the Arm FF-A protocol. FF-A provides (among other
: things) a set of memory management APIs allowing the Normal World to
: share, donate or lend pages with Secure. By monitoring these SMCs, pKVM
: can ensure that the pages that are shared, lent or donated to Secure by
: the host kernel are only pages that it owns.
KVM: arm64: pkvm: Add support for fragmented FF-A descriptors
KVM: arm64: Handle FFA_FEATURES call from the host
KVM: arm64: Handle FFA_MEM_LEND calls from the host
KVM: arm64: Handle FFA_MEM_RECLAIM calls from the host
KVM: arm64: Handle FFA_MEM_SHARE calls from the host
KVM: arm64: Add FF-A helpers to share/unshare memory with secure world
KVM: arm64: Handle FFA_RXTX_MAP and FFA_RXTX_UNMAP calls from the host
KVM: arm64: Allocate pages for hypervisor FF-A mailboxes
KVM: arm64: Probe FF-A version and host/hyp partition ID during init
KVM: arm64: Block unsafe FF-A calls from the host
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
There's no longer a need for the baggage of the old scheme for handling
configurable ID register fields. Rip it all out in favor of the
generalized infrastructure.
Link: https://lore.kernel.org/r/20230609190054.1542113-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Everything is in place now to use the generic ID register
infrastructure. Use the VM-wide values to service ID register reads.
The ID registers are invariant after the VM has started, so there is no
need for locking in that case. This is rather desirable for VM live
migration, as the needless lock contention could prolong the VM blackout
period.
Link: https://lore.kernel.org/r/20230609190054.1542113-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM allows userspace to write to the CSV2 and CSV3 fields of
ID_AA64PFR0_EL1 so long as it doesn't over-promise on the
Spectre/Meltdown mitigation state. Switch over to the new way of the
world for screening user writes. Leave the old plumbing in place until
we actually start handling ID register reads from the VM-wide values.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-10-oliver.upton@linux.dev
[Oliver: split from monster patch, added commit description]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM allows userspace to specify a PMU version for the guest by writing
to the corresponding ID registers. Currently the validation of these
writes is done manuallly, but there's no reason we can't switch over to
the generic sanitisation infrastructure.
Start screening user writes through arm64_check_features() to prevent
userspace from over-promising in terms of vPMU support. Leave the old
masking in place for now, as we aren't completely ready to serve reads
from the VM-wide values.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-9-oliver.upton@linux.dev
[Oliver: split off from monster patch, cleaned up handling of NI vPMU
values, wrote commit description]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Rather than reinventing the wheel in KVM to do ID register sanitisation
we can rely on the work already done in the core kernel. Implement a
generalized sanitisation of ID registers based on the combination of the
arm64_ftr_bits definitions from the core kernel and (optionally) a set
of KVM-specific overrides.
This all amounts to absolutely nothing for now, but will be used in
subsequent changes to realize user-configurable ID registers.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-8-oliver.upton@linux.dev
[Oliver: split off from monster patch, rewrote commit description,
reworked RAZ handling, return EINVAL to userspace]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Initialize the default ID register values upon the first call to
KVM_ARM_VCPU_INIT. The vCPU feature flags are finalized at that point,
so it is possible to determine the maximum feature set supported by a
particular VM configuration. Do nothing with these values for now, as we
need to rework the plumbing of what's already writable to be compatible
with the generic infrastructure.
Co-developed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-7-oliver.upton@linux.dev
[Oliver: Hoist everything into KVM_ARM_VCPU_INIT time, so the features
are final]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated
in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not
changed to a proper default value. This was leading to the driver
thinking that it has dedicated XDP queues, when it didn't.
Fix it by setting xdp_txq_queues_mode to the correct value if the driver
fallbacks to MSI or legacy IRQ mode. The correct value is
EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues.
The issue can be easily visible if the kernel is started with pci=nomsi,
then a call trace is shown. It is not shown only with sfc's modparam
interrupt_mode=2. Call trace example:
WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc]
[...skip...]
Call Trace:
<TASK>
efx_set_channels+0x5c/0xc0 [sfc]
efx_probe_nic+0x9b/0x15a [sfc]
efx_probe_all+0x10/0x1a2 [sfc]
efx_pci_probe_main+0x12/0x156 [sfc]
efx_pci_probe_post_io+0x18/0x103 [sfc]
efx_pci_probe.cold+0x154/0x257 [sfc]
local_pci_probe+0x42/0x80
Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and
macsec->stats on some of the memory allocation failure paths. However, the
net_device is already registered to that moment: in macsec_newlink(), just
before calling macsec_add_dev(). This means that during unregister process
its priv_destructor - macsec_free_netdev() - will be called and will free
the stats again.
Remove freeing percpu stats inside macsec_add_dev() because
macsec_free_netdev() will correctly free the already allocated ones. The
pointers to unallocated stats stay NULL, and free_percpu() treats that
correctly.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On CPUs where E2H is RES1, we very quickly set the scene for
running EL2 with a VHE configuration, as we do not have any other
choice.
However, CPUs that conform to the current writing of the architecture
start with E2H=0, and only later upgrade with E2H=1. This is all
good, but nothing there is actually reconfiguring EL2 to be able
to correctly run the kernel at EL1. Huhuh...
The "obvious" solution is not to just reinitialise the timer
controls like we do, but to really intitialise *everything*
unconditionally.
This requires a bit of surgery, and is a good opportunity to
remove the macro that messes with SPSR_EL2 in init_el2_state.
With that, hVHE now works correctly on my trusted A55 machine!
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614155129.2697388-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
It probbaly makes no sense to support arbitrary network devices
for lapbether.
syzbot reported:
skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1
kernel BUG at net/core/skbuff.c:200 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:196 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
lr : skb_panic net/core/skbuff.c:196 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
sp : ffff8000973b7260
x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000
x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea
x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0
x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00
x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:196 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
skb_push+0xf0/0x108 net/core/skbuff.c:2409
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383
dev_hard_header include/linux/netdevice.h:3137 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
lapb_establish_data_link+0x94/0xec
lapb_device_event+0x348/0x4e0
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
__dev_notify_flags+0x2bc/0x544
dev_change_flags+0xd0/0x15c net/core/dev.c:8643
devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150
inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979
sock_do_ioctl+0x134/0x2dc net/socket.c:1201
sock_ioctl+0x4ec/0x858 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191
el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
adding three people from Alibaba as reviewers for SMC.
They are currently working on improving SMC on other architectures than
s390 and help with reviewing patches on top.
Thank you D. Wythe, Tony Lu and Wen Gu for your contributions and
collaboration and welcome on board as reviewers!
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch prevents the system from crashing when unloading the ISM module.
How to reproduce: Attach an ISM device and execute 'rmmod ism'.
Error-Log:
- Trying to free already-free IRQ 0
- WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540
After calling ism_dev_exit() for each ISM device in the exit routine,
pci_unregister_driver() will execute ism_remove() for each ISM device.
Because ism_remove() also calls ism_dev_exit(),
free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM
device. This results in a crash with the error
'Trying to free already-free IRQ'.
In the exit routine, it is enough to call pci_unregister_driver()
because it ensures that ism_dev_exit() is called once per
ISM device.
Cc: <stable@vger.kernel.org> # 6.3+
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The debugfs_create_dir() returns ERR_PTR in case of an error and the
correct way of checking it is using the IS_ERR_OR_NULL inline function
rather than the simple null comparision. This patch fixes the issue.
Cc: stable@vger.kernel.org
Suggested-By: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The hardware monitoring points for instruction fetching and load/store
operations need to align 4 bytes and 1/2/4/8 bytes respectively.
Reported-by: Colin King <colin.i.king@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The "write_fcsr()" macro uses wrong the positions for val and dest in
asm. Fix it!
Reported-by: Miao HAO <haomiao19@mails.ucas.ac.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should
return true, otherwise it would be treated as a swap pmd.
This is the same as arm64 does in commit b65399f6111b ("arm64/mm: Change
THP helpers to comply with generic MM semantics"), we also add a new bit
named _PAGE_PRESENT_INVALID for LoongArch.
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535.
Plus 2 * VLAN_HLEN (4), that is up to 65543.
The picos_per_byte variable is the largest when "speed" is lowest -
SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000.
Their product - 52434400000 - exceeds 32 bits, which is a problem,
because apparently, a multiplication between two 32-bit factors is
evaluated as 32-bit before being assigned to a 64-bit variable.
In fact it's a problem for any MTU value larger than 5368.
Cast one of the factors of the multiplication to u64 to force the
multiplication to take place on 64 bits.
Issue found by Coverity.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
