| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a couple of fixes for storage key handling relevant for debugging
- add cond_resched into potentially slow subchannels scanning loop
- fixes for PF/VF linking and to ignore stale PCI configuration request
events
* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix PF/VF linking on hot plug
s390/pci: re-introduce zpci_remove_device()
s390/pci: fix zpci_bus_link_virtfn()
s390/ptrace: fix storage key handling
s390/runtime_instrumentation: fix storage key handling
s390/pci: ignore stale configuration request event
s390/cio: add cond_resched() in the slow_eval_known_fn() loop
|
|
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
"Another set of DT fixes:
- restore range parsing error check
- workaround PCI range parsing with missing 'device_type' now
required
- correct description of 'phy-connection-type'
- fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema
- a couple of grammar and whitespace fixes
- update Shawn Guo's email"
* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: vendor-prefixes: Remove trailing whitespace
dt-bindings: net: correct description of phy-connection-type
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
of: address: Work around missing device_type property in pcie nodes
dt: writing-schema: Miscellaneous grammar fixes
dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
of/address: check for invalid range.cpu_addr
|
|
Correct gpio ranges according to i.MX7ULP pinctrl driver:
gpio_ptc: ONLY pin 0~19 are available;
gpio_ptd: ONLY pin 0~11 are available;
gpio_pte: ONLY pin 0~15 are available;
gpio_ptf: ONLY pin 0~19 are available;
Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc so no data can leak apart from
previous readings.
The explicit alignment of ts is not necessary in this case as by
coincidence the padding will end up the same, however I consider
it to make the code less fragile and have included it.
Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
Here we use a structure on the stack. The driver already did an
explicit memset so no data leak was possible.
Forced alignment of ts is not strictly necessary but probably makes
the code slightly less fragile.
Note there has been some rework in this driver of the years, so no
way this will apply cleanly all the way back.
Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc so no data can leak appart
from previous readings.
It is necessary to force the alignment of ts to avoid the padding
on x86_32 being different from 64 bit platorms (it alows for
4 bytes aligned 8 byte types.
Fixes: 06ad7ea10e2b ("max44000: Initial triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
The explicit alignment of ts is necessary to ensure consistent
padding for x86_32 in which the ts would otherwise be 4 byte aligned.
Fixes: 283d26917ad6 ("iio: chemical: ccs811: Add triggered buffer support")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte s16 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
In this case the forced alignment of the ts is necessary to ensure
correct padding on x86_32 where the s64 would only be 4 byte aligned.
Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The force alignment of ts is not strictly necessary in this particularly
case but does make the code less fragile.
Fixes: a84ef0d181d9 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by moving
to a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
Fixes tag is beyond some major refactoring so likely manual backporting
would be needed to get that far back.
Whilst the force alignment of the ts is not strictly necessary, it
does make the code less fragile.
Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte u8 array on the stack. As Lars also noted
this anti pattern can involve a leak of data to userspace and that
indeed can happen here. We close both issues by moving to
a suitable structure in the iio_priv() data with alignment
ensured by use of an explicit c structure. This data is allocated
with kzalloc so no data can leak appart from previous readings.
The additional forcing of the 8 byte alignment of the timestamp
is not strictly necessary but makes the code less fragile by
making this explicit.
Fixes: c7eeea93ac60 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
iio_push_to_buffers_with_timestamp assumes 8 byte alignment which
is not guaranteed by an array of smaller elements.
Note that whilst in this particular case the alignment forcing
of the ts element is not strictly necessary it acts as good
documentation. Doing this where not necessary should cut
down on the number of cut and paste introduced errors elsewhere.
Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
|
|
The kernel fails to compile due to undefined reference to
devm_iio_triggered_buffer_setup() if IIO_TRIGGERED_BUFFER is not
enabled. The original patch [1] had this dependency. But somehow it
didn't make it into the kernel tree. Re-add it.
[1] https://lore.kernel.org/lkml/20200623233011.2319035-3-heiko@sntech.de/
Fixes: 4e130dc7b413 ("iio: adc: rockchip_saradc: Add support iio buffers")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
To stop conversion ads1015_set_power_state() function call unimplemented
function __pm_runtime_suspend() from pm_runtime_put_autosuspend()
if CONFIG_PM is not set.
In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS,
so ads1015_read_raw() failed because ads1015_set_power_state() returns an
error.
If CONFIG_PM is disabled, there is no need to start/stop conversion.
Fix it by adding return 0 function variant if CONFIG_PM is not set.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support")
Tested-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This should be testing "regmap" instead of "priv->regmap". The
"priv->regmap" variable is always zero so it's not an error pointer.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
BMI160 Minimium gyroscope frequency in normal mode is 25Hz.
When older EC firmware do not report their sensors frequencies,
use 25Hz as the minimum for gyroscope to be sure it works on BMI160.
Fixes: ae7b02ad2f32d ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
During inbound iATU configuration we can get errors while
configuring PCI registers, there is a certain scenario in which these
errors are not reflected and driver is loaded with wrong configuration.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The null check on a failed workqueue create is currently null checking
hdev->cq_wq rather than the pointer hdev->cq_wq[i] and so the test
will never be true on a failed workqueue create. Fix this by checking
hdev->cq_wq[i].
Addresses-Coverity: ("Dereference before null check")
Fixes: 5574cb2194b1 ("habanalabs: Assign each CQ with its own work queue")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
User input must be validated before using it to
access internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The condition was reversed. It should have been less than instead of
greater than. The result is that we never enter the loop.
Fixes: fcc6a4e60678 ("habanalabs: Extract ECC information from FW")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This has to be a long instead of a u32 because we write a long value.
On 64 bit systems, this will cause memory corruption.
Fixes: c216477363a3 ("habanalabs: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
User address must be validated before driver performs address map.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In case the driver fails to configure the PCI controller iATU, it needs to
unmap the PCI bars before exiting so if the driver is removed, the bars
won't be left mapped.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
We want neither
"
include/linux/compiler_attributes.h:201:41: warning: statement will never
be executed [-Wswitch-unreachable]
201 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
"
nor
"
include/linux/compiler_attributes.h:201:41: warning: attribute
'fallthrough' not preceding a case label or default label
201 | # define fallthrough __attribute__((__fallthrough__))
| ^~~~~~~~~~~~~
"
It's not worth adding one more macro. Let's simply place the fallthrough
in between the expansions.
Fixes: c9b029903466 ("MIPS: Use fallthrough for arch/mips")
Cc: stable@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The couple of #includes are unused by now; remove to prevent namespace
pollution.
This fixes e.g. build of dm_thin, which has a VIRTUAL symbol that
conflicted with the newly-introduced one in mach-loongson64/boot_param.h.
Fixes: 39c1485c8baa ("MIPS: KVM: Add kvm guest support for Loongson-3")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This has roughly the same effect as drm_atomic_helper_wait_for_vblanks(),
basically just ensuring that vblank accounting is enabled so that we get
valid timestamp/seqn on pageflip events.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
According to the Reference Manual, the correct size is 512 MiB.
Without this fix, probing the QSPI fails:
fsl-quadspi 1550000.spi: ioremap failed for resource
[mem 0x40000000-0x7fffffff]
fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed
fsl-quadspi: probe of 1550000.spi failed with error -12
Fixes: 85f8ee78ab72 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
REQ_FUA should be checked using rq->cmd_flags instead of req_op().
Fixes: deb78b419dfda ("nullb: emulate cache")
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Based on nvme spec, when keep alive timeout is set to zero
the keep-alive timer should be disabled.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a command send through nvme-multipath failed on a dying queue, resend it
on another path.
Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: rebased on top of the completion refactoring]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Check the SCT sub-field for a path related status instead of enumerating
invididual status code. As of NVMe 1.4 this adds "Internal Path Error"
and "Controller Pathing Error" to the list, but it also future proofs for
additional status codes added to the category.
Suggested-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Lift all the code to decide the dispostition of a completed command
from nvme_complete_rq and nvme_failover_req into a new helper, which
returns an emum of the potential actions. nvme_complete_rq then
just switches on those and calls the proper helper for the action.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_end_request is a bit misnamed, as it wraps around the
blk_mq_complete_* API. It's semantics also are non-trivial, so give it
a more descriptive name and add a comment explaining the semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zoned block devices reuse the chunk_sectors queue limit to define zone
boundaries. If a such a device happens to also report an optimal
boundary, do not use that to define the chunk_sectors as that may
intermittently interfere with io splitting and zone size queries.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All operations are based on the controller, not the host page size.
Switch the dma pool to use the controller page size as well to avoid
massive overallocations on large page size systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recently nvme_dev.q_depth was changed from an int to u16 type.
This falls over for the queue depth calculation in nvme_pci_enable(),
where NVME_CAP_MQES(dev->ctrl.cap) + 1 may overflow as a u16, as
NVME_CAP_MQES() is a 16b number also. That happens for me, and this is the
result:
root@ubuntu:/home/john# [148.272996] Unable to handle kernel NULL pointer
dereference at virtual address 0000000000000010
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000a27bf3c9000
[0000000000000010] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: nvme nvme_core
CPU: 56 PID: 256 Comm: kworker/u195:0 Not tainted
5.8.0-next-20200812 #27
Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 -
V1.16.01 03/15/2019
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
pstate: 80c00009 (Nzcv daif +PAN +UAO BTYPE=--)
pc : __sg_alloc_table_from_pages+0xec/0x238
lr : __sg_alloc_table_from_pages+0xc8/0x238
sp : ffff800013ccbad0
x29: ffff800013ccbad0 x28: ffff0a27b3d380a8
x27: 0000000000000000 x26: 0000000000002dc2
x25: 0000000000000dc0 x24: 0000000000000000
x23: 0000000000000000 x22: ffff800013ccbbe8
x21: 0000000000000010 x20: 0000000000000000
x19: 00000000fffff000 x18: ffffffffffffffff
x17: 00000000000000c0 x16: fffffe289eaf6380
x15: ffff800011b59948 x14: ffff002bc8fe98f8
x13: ff00000000000000 x12: ffff8000114ca000
x11: 0000000000000000 x10: ffffffffffffffff
x9 : ffffffffffffffc0 x8 : ffff0a27b5f9b6a0
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0a27b5f9b680 x4 : 0000000000000000
x3 : ffff0a27b5f9b680 x2 : 0000000000000000
x1 : 0000000000000001 x0 : 0000000000000000
Call trace:
__sg_alloc_table_from_pages+0xec/0x238
sg_alloc_table_from_pages+0x18/0x28
iommu_dma_alloc+0x474/0x678
dma_alloc_attrs+0xd8/0xf0
nvme_alloc_queue+0x114/0x160 [nvme]
nvme_reset_work+0xb34/0x14b4 [nvme]
process_one_work+0x1e8/0x360
worker_thread+0x44/0x478
kthread+0x150/0x158
ret_from_fork+0x10/0x34
Code: f94002c3 6b01017f 540007c2 11000486 (f8645aa5)
---[ end trace 89bb2b72d59bf925 ]---
Fix by making onto a u32.
Also use u32 for nvme_dev.q_depth, as we assign this value from
nvme_dev.q_depth, and nvme_dev.q_depth will possibly hold 65536 - this
avoids the same crash as above.
Fixes: 61f3b8963097 ("nvme-pci: use unsigned for io queue depth")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When locking the ctrl->lock spinlock IRQs need to be disabled to avoid a
dead lock. The new spin_lock() calls recently added produce the
following lockdep warning when running the blktest nvme/003:
================================
WARNING: inconsistent lock state
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/2/22 [HC0[0]:SC1[1]:HE0:SE0] takes:
ffff888276a8c4c0 (&ctrl->lock){+.?.}-{2:2}, at: nvme_keep_alive_end_io+0x50/0xc0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x164/0x500
_raw_spin_lock+0x28/0x40
nvme_get_effects_log+0x37/0x1c0
nvme_init_identify+0x9e4/0x14f0
nvme_reset_work+0xadd/0x2360
process_one_work+0x66b/0xb70
worker_thread+0x6e/0x6c0
kthread+0x1e7/0x210
ret_from_fork+0x22/0x30
irq event stamp: 1449221
hardirqs last enabled at (1449220): [<ffffffff81c58e69>] ktime_get+0xf9/0x140
hardirqs last disabled at (1449221): [<ffffffff83129665>] _raw_spin_lock_irqsave+0x25/0x60
softirqs last enabled at (1449210): [<ffffffff83400447>] __do_softirq+0x447/0x595
softirqs last disabled at (1449215): [<ffffffff81b489b5>] run_ksoftirqd+0x35/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ctrl->lock);
<Interrupt>
lock(&ctrl->lock);
*** DEADLOCK ***
no locks held by ksoftirqd/2/22.
stack backtrace:
CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 5.8.0-rc4-eid-vmlocalyes-dbg-00157-g7236657c6b3a #1450
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xc8/0x11a
print_usage_bug.cold.63+0x235/0x23e
mark_lock+0xa9c/0xcf0
__lock_acquire+0xd9a/0x2b50
lock_acquire+0x164/0x500
_raw_spin_lock_irqsave+0x40/0x60
nvme_keep_alive_end_io+0x50/0xc0
blk_mq_end_request+0x158/0x210
nvme_complete_rq+0x146/0x500
nvme_loop_complete_rq+0x26/0x30 [nvme_loop]
blk_done_softirq+0x187/0x1e0
__do_softirq+0x118/0x595
run_ksoftirqd+0x35/0x50
smpboot_thread_fn+0x1d3/0x310
kthread+0x1e7/0x210
ret_from_fork+0x22/0x30
Fixes: be93e87e7802 ("nvme: support for multiple Command Sets Supported and Effects log pages")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of calling blk_put_request() which calls blk_mq_free_request(),
call blk_mq_free_request() directly for NVMeOF passthru. This is to
mainly avoid an extra function call in the completion path
nvmet_passthru_req_done().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the existing NVMeOF Passthru core command handling on failure of
nvme_alloc_request() it errors out with rq value set to NULL. In the
error handling path it calls blk_put_request() without checking if
rq is set to NULL or not which produces following Oops:-
[ 1457.346861] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1457.347838] #PF: supervisor read access in kernel mode
[ 1457.348464] #PF: error_code(0x0000) - not-present page
[ 1457.349085] PGD 0 P4D 0
[ 1457.349402] Oops: 0000 [#1] SMP NOPTI
[ 1457.349851] CPU: 18 PID: 10782 Comm: kworker/18:2 Tainted: G OE 5.8.0-rc4nvme-5.9+ #35
[ 1457.350951] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214
[ 1457.352347] Workqueue: events nvme_loop_execute_work [nvme_loop]
[ 1457.353062] RIP: 0010:blk_mq_free_request+0xe/0x110
[ 1457.353651] Code: 3f ff ff ff 83 f8 01 75 0d 4c 89 e7 e8 1b db ff ff e9 2d ff ff ff 0f 0b eb ef 66 8
[ 1457.355975] RSP: 0018:ffffc900035b7de0 EFLAGS: 00010282
[ 1457.356636] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002
[ 1457.357526] RDX: ffffffffa060bd05 RSI: 0000000000000000 RDI: 0000000000000000
[ 1457.358416] RBP: 0000000000000037 R08: 0000000000000000 R09: 0000000000000000
[ 1457.359317] R10: 0000000000000000 R11: 000000000000006d R12: 0000000000000000
[ 1457.360424] R13: ffff8887ffa68600 R14: 0000000000000000 R15: ffff8888150564c8
[ 1457.361322] FS: 0000000000000000(0000) GS:ffff888814600000(0000) knlGS:0000000000000000
[ 1457.362337] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1457.363058] CR2: 0000000000000000 CR3: 000000081c0ac000 CR4: 00000000003406e0
[ 1457.363973] Call Trace:
[ 1457.364296] nvmet_passthru_execute_cmd+0x150/0x2c0 [nvmet]
[ 1457.364990] process_one_work+0x24e/0x5a0
[ 1457.365493] ? __schedule+0x353/0x840
[ 1457.365957] worker_thread+0x3c/0x380
[ 1457.366426] ? process_one_work+0x5a0/0x5a0
[ 1457.366948] kthread+0x135/0x150
[ 1457.367362] ? kthread_create_on_node+0x60/0x60
[ 1457.367934] ret_from_fork+0x22/0x30
[ 1457.368388] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corer
[ 1457.368414] ata_piix crc32c_intel virtio_pci libata virtio_ring serio_raw t10_pi virtio floppy dm_]
[ 1457.380849] CR2: 0000000000000000
[ 1457.381288] ---[ end trace c6cab61bfd1f68fd ]---
[ 1457.381861] RIP: 0010:blk_mq_free_request+0xe/0x110
[ 1457.382469] Code: 3f ff ff ff 83 f8 01 75 0d 4c 89 e7 e8 1b db ff ff e9 2d ff ff ff 0f 0b eb ef 66 8
[ 1457.384749] RSP: 0018:ffffc900035b7de0 EFLAGS: 00010282
[ 1457.385393] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002
[ 1457.386264] RDX: ffffffffa060bd05 RSI: 0000000000000000 RDI: 0000000000000000
[ 1457.387142] RBP: 0000000000000037 R08: 0000000000000000 R09: 0000000000000000
[ 1457.388029] R10: 0000000000000000 R11: 000000000000006d R12: 0000000000000000
[ 1457.388914] R13: ffff8887ffa68600 R14: 0000000000000000 R15: ffff8888150564c8
[ 1457.389798] FS: 0000000000000000(0000) GS:ffff888814600000(0000) knlGS:0000000000000000
[ 1457.390796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1457.391508] CR2: 0000000000000000 CR3: 000000081c0ac000 CR4: 00000000003406e0
[ 1457.392525] Kernel panic - not syncing: Fatal exception
[ 1457.394138] Kernel Offset: disabled
[ 1457.394677] ---[ end Kernel panic - not syncing: Fatal exception ]---
We fix this Oops by adding a new goto label out_put_req and reordering
the blk_put_request call to avoid calling blk_put_request() with rq
value is set to NULL. Here we also update the rest of the code
accordingly.
Fixes: 06b7164dfdc0 ("nvmet: add passthru code to process commands")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current implementation before submitting the passthru cmd we
may come across error e.g. getting ns from passthru controller,
allocating a request from passthru controller, etc. For all the failure
cases it only uses single goto label fail_out.
In the target code, we follow the pattern to have a separate label for
each error out the case when setting up multiple things before the actual
action.
This patch follows the same pattern and renames generic fail_out label
to out_put_ns and updates the error out cases in the
nvmet_passthru_execute_cmd() where it is needed.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we find an optimized path, we quit the loop immediately. Thus we can use
just one variable for the next path, slighly simplifying the code.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
