summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-25Merge branch 'phyter-bug-fixes'David S. Miller
Richard Cochran says: ==================== phyter bug fixes While working on a project using the phyter, I noticed some bugs that have crept in over time. This series fixes those bugs. These patches are also meant for stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: dp83640: fix improper double spin locking.Richard Cochran
A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: dp83640: reinforce locking rules.Richard Cochran
Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: dp83640: fix broken calibration routine.Richard Cochran
Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25Merge tag 'pinctrl-v4.1-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are some three pin control fixes for the v4.1 cycle, all driver-specific. Business as usual and calm as it should be in this portion of the merge window. - IRQ trigger fix for the Intel Cherryview - GPIO-to-pin mapping fix for the Cygnus driver - GPIO-to-pin mapping fix for the Meson8b driver" * tag 'pinctrl-v4.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Fix gpio/pin mapping for Meson8b pinctrl: cygnus: fixed incorrect GPIO-pin mapping pinctrl: cherryview: Read triggering type from HW if not set when requested
2015-05-25Merge tag 'gpio-v4.1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are two GPIO fixes targeted for stable: - a leak in gpiochip_add path destined for stable - a kempld driver bug destined for stable" * tag 'gpio-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: gpio-kempld: Fix get_direction return value gpio: fix gpio leak in gpiochip_add error path
2015-05-25net: stmmac: create one debugfs dir per net-deviceMathieu Olivari
stmmac DebugFS entries are currently global to the driver. As a result, having more than one stmmac device in the system creates the following error: * ERROR stmmaceth, debugfs create directory failed * stmmac_hw_setup: failed debugFS registration This also results in being able to access the debugfs information for the first registered device only. This patch changes the debugfs structure to have one sub-directory per net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up under /sys/kernel/debug/stmmaceth/ethN/. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net/ibm/emac: fix size of emac dump memory areasIvan Mikhaylov
Fix in send of emac regs dump to ethtool which causing in wrong data interpretation on ethtool layer for MII and EMAC. Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25Merge tag 'wireless-drivers-for-davem-2015-05-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix firmware name and other things to enable 3165 * fix bad APMG configuration for 8000 (no AMPG on these devices) * fix MAC address assignment for 8000 * fix firmware debugging triggers (MLME) * fix several bugs in low power states code (net-detect, d0i3) ssb: * fix reboot after device reset for WRT350N v1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25x86/fpu: Micro-optimize the copy_xregs_to_kernel*() and ↵Ingo Molnar
copy_kernel_to_xregs*() functions The copy_xregs_to_kernel*() and copy_kernel_to_xregs*() functions are used to copy FPU registers to kernel memory and vice versa. They are never expected to fail, yet they have a return code, mostly because that way they can share the assembly macros with the copy*user*() functions. This error code is then silently ignored by the context switching and other code - which made the bug in: b8c1b8ea7b21 ("x86/fpu: Fix FPU state save area alignment bug") harder to fix than necessary. So remove the return values and check for no faults when FPU debugging is enabled in the .config. This improves the eagerfpu context switching fast path by a couple of instructions, when FPU debugging is disabled: ffffffff810407fa: 89 c2 mov %eax,%edx ffffffff810407fc: 48 0f ae 2f xrstor64 (%rdi) ffffffff81040800: 31 c0 xor %eax,%eax -ffffffff81040802: eb 0a jmp ffffffff8104080e <__switch_to+0x321> +ffffffff81040802: eb 16 jmp ffffffff8104081a <__switch_to+0x32d> ffffffff81040804: 31 c0 xor %eax,%eax ffffffff81040806: 48 0f ae 8b c0 05 00 fxrstor64 0x5c0(%rbx) ffffffff8104080d: 00 Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Improve the initialization logic of 'err' around xstate_fault() ↵Ingo Molnar
constraints There's a confusing aspect of how xstate_fault() constraints are handled by the FPU register/memory copying functions in fpu/internal.h: they use "0" (0) to signal that the asm code will not always set 'err' to a valid value. But 'err' is already initialized to 0 in C code, which is duplicated by the asm() constraint. Should the initialization value ever be changed, it might become subtly inconsistent with the not too clear asm() constraint. Use 'err' as the value of the input variable instead, to clarify this all. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Improve xstate_fault() handlingIngo Molnar
There are two problems with xstate_fault handling: - The xstate_fault() macro takes an argument, but that's propagated into the assembly named label as well. This is technically correct currently but might result in failures if anytime a more complex argument is used. So use a separate '_err' name instead for the label. - All the xstate_fault() using functions have an error variable named 'err', which is an output variable to the asm() they are using. The problem is, it's not always set by the asm(), in which case the compiler might optimize out its initialization, so that the C variable 'err' might become corrupted after the asm() - confusing anyone who tries to take advantage of this variable after the asm(). Mark it an input variable as well. This is a latent bug currently, but an upcoming debug patch will make use of 'err'. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Rename xstate related 'fx' references to 'xstate'Ingo Molnar
So the xstate code was probably first copied from the fxregs code, hence it carried over the 'fx' naming for the state pointer variable. But this is slightly confusing, as we usually on call the (legacy) MMX/SSE state 'fx', both in data structures and in the functions build around FXSAVE/FXRSTOR. So rename it to 'xstate' to make it more apparent what it is related to. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Fix fpu__init_system_xstate() commentsIngo Molnar
Remove obsolete comment about __init limitations: in the new code there aren't any. Also standardize the comment style in the function while at it. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Move the xstate copying functions into fpu/internal.hIngo Molnar
All the other register<-> memory copying functions are defined in fpu/internal.h, so move the xstate variants there too. Beyond being more consistent, this also allows FPU debugging checks to be added to them. (Because they can now use the macros defined in fpu/internal.h.) Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25Merge branch 'linus' into x86/fpuIngo Molnar
Resolve semantic conflict in arch/x86/kvm/cpuid.c with: c447e76b4cab ("kvm/fpu: Enable eager restore kvm FPU for MPX") By removing the FPU internal include files. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86/fpu: Fix FPU state save area alignment bugIngo Molnar
On most configs task-struct is cache line aligned, which makes the XSAVE area's 64-byte required alignment work out fine. But on some .config's task_struct is aligned only to 16 bytes (enforced by ARCH_MIN_TASKALIGN), which makes things like fpu__copy() (that XSAVEOPT uses) not work so well. I broke this in: 7366ed771f6e ("x86/fpu: Simplify FPU handling by embedding the fpstate in task_struct (again)") which embedded the fpstate in the task_struct. The alignment requirements of the FPU code were originally present in ARCH_MIN_TASKALIGN, which still has a value of 16, which was the alignment requirement of the FPU state area prior XSAVE. But this link was not documented (and not required) and the link got lost when the FPU state area was made dynamic years ago. With XSAVEOPT the minimum alignment requirment went up to 64 bytes, and the embedding of the FPU state area in task_struct exposed it again - and '16' was not increased to '64'. So fix this bug, but also try to address the underlying lost link of information that made it easier to happen: - document ARCH_MIN_TASKALIGN a bit better - use alignof() to recover the current alignment requirements. This would work in the future as well, should the alignment requirements go up to 128 bytes with things like AVX512. ( We should probably also use the vSMP alignment rules for all of x86, but that's for another patch. ) Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-25x86: bpf_jit: fix compilation of large bpf programsAlexei Starovoitov
x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: phy: bcm7xxx: Fix 7425 PHY ID and flagsFlorian Fainelli
While adding support for 7425 PHY in the 7xxx PHY driver, the ID that was used was actually coming from an external PHY: a BCM5461x. Fix this by using the proper ID for the internal 7425 PHY and set the PHY_IS_INTERNAL flag, otherwise consumers of this PHY driver would not be able to properly identify it as such. Fixes: d068b02cfdfc2 ("net: phy: add BCM7425 and BCM7429 PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-24Linux 4.1-rc5v4.1-rc5Linus Torvalds
2015-05-24n_tty: Fix calculation of size in canon_copy_from_read_bufMark Tomlinson
There was a hardcoded value of 4096 which should have been N_TTY_BUF_SIZE. This caused reads from tty to fail with EFAULT when they shouldn't have done if N_TTY_BUF_SIZE was declared to be something other than 4096. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial: imx: Fix DMA handling for IDLE condition abortsPhilipp Zabel
The driver configures the IDLE condition to interrupt the SDMA engine. Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this caused repeated 1-byte DMA transfers, regardless of available data in the RX FIFO. Also, when returning due to the IDLE condition, the UART ROM script already increased its counter, causing residue to be off by one. This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers and decreases count by when the DMA transfer was aborted due to the IDLE condition, fixing serial transfers using DMA on i.MX6Q. Reported-by: Peter Seiderer <ps.report@gmx.net> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24serial/amba-pl011: Unconditionally poll for FIFO space before each TX charDave Martin
Commit 734745caeb9f155ab58918834a8c70e83fa6afd3 serial/amba-pl011: (Activate TX IRQ passively) introduces a race which causes the driver sometimes to attempt to write a character to the TX FIFO when the FIFO is already full. The PL011 does not guarantee its behaviour when the FIFO is overfilled. In practice, this can cause duplicate and/or dropped characters to be output on the wire. The problem is common enough to be readily observable on the ARM Juno platform when the PL011 UART is used as the console and DMA is not in use. This patch fixes this problem by always polling for space before each character is written to the FIFO. This will be amended to a less brute-force approach in a later commit, but this patch should help ensure correct behaviour for now. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24Merge tag 'iio-fixes-for-4.1b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of fixes for IIO in the 4.1 cycle. * twl6030-gpadc - Drop a bonus space from the modalias. * adis16400 - Report pressure channel scale (not much use without it) - Use different channel indices for the two voltage channels (ABI) - Compute the san mask from the channel indices instead of using ~0UL as we now care about extra bits being set. - Fix burst mode due to rx buffer not being intialized and wrong tx buffer type being set. Also had the wrong transfer length. All in all it didn't work, now it does ;) - adis16448 has additional registers in burst mode so we skip over them to make it work.
2015-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of five fixes: Two MAINTAINER email updates (urgent because the non-avagotech emails will start bouncing) an lpfc big endian oops fix, a 256 byte sector hang fix (to eliminate 256 byte sectors) and a storvsc fix which could cause test unit ready failures on bringup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex MAINTAINERS, be2iscsi: change email domain sd: Disable support for 256 byte/sector disks lpfc: Fix breakage on big endian kernels storvsc: Set the SRB flags correctly when no data transfer is needed
2015-05-24Merge tag 'for-4.1-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: fixes for v4.1-rc includes a fix in phy core w.r.t error checking, couple of fixes in kconfig one which fixes randconfig error and the other to fix dependency in QCOM PHY, driver fix in omap-usb2 in the error path and a driver fix in rcar-gen2 to fix bit location.
2015-05-24usb: host: xhci: add mutex for non-thread-safe dataChris Bainbridge
Regression in commit 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") The regression resulted in intermittent failure to initialise a 10-port hub (with three internal VL812 4-port hub controllers) on boot, with a failure rate of around 8%, due to multiple race conditions when accessing addr_dev and slot_id in struct xhci_hcd. This regression also exposed a problem with xhci_setup_device, which "should be protected by the usb_address0_mutex" but no longer is due to commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus") With separate buses (and locks) it is no longer the case that a single lock will protect xhci_setup_device from accesses by two parallel threads processing events on the two buses. Fix this by adding a mutex to protect addr_dev and slot_id in struct xhci_hcd, and by making the assignment of slot_id atomic. Fixes multiple boot errors: [ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2 [ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures [ 0.583012] usb usb1-port3: couldn't allocate usb_device And: [ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.637421] usb usb1-port1: couldn't allocate usb_device And: [ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0. [ 0.753373] usb 1-3: hub failed to enable device, error -22 [ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.753403] usb usb1-port3: couldn't allocate usb_device And: [ 11.018386] usb 1-3: device descriptor read/all, error -110 And: [ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command Tested with 200 reboots, resulting in no USB hub init related errors. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: <stable@vger.kernel.org> # 3.18+ [changed git commit description style for checkpatch -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24usb: make module xhci_hcd removableArthur Demchenkov
Fixed regression. After commit 29e409f0f761 ("xhci: Allow xHCI drivers to be built as separate modules") the module xhci_hcd became non-removable. That behaviour is not expected and there're no notes about it in commit message. The module should be removable as it blocks PM suspend/resume functions (Debian Bug#666406). Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlersAndy Lutomirski
The early_idt_handlers asm code generates an array of entry points spaced nine bytes apart. It's not really clear from that code or from the places that reference it what's going on, and the code only works in the first place because GAS never generates two-byte JMP instructions when jumping to global labels. Clean up the code to generate the correct array stride (member size) explicitly. This should be considerably more robust against screw-ups, as GAS will warn if a .fill directive has a negative count. Using '. =' to advance would have been even more robust (it would generate an actual error if it tried to move backwards), but it would pad with nulls, confusing anyone who tries to disassemble the code. The new scheme should be much clearer to future readers. While we're at it, improve the comments and rename the array and common code. Binutils may start relaxing jumps to non-weak labels. If so, this change will fix our build, and we may need to backport this change. Before, on x86_64: 0000000000000000 <early_idt_handlers>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9> 5: R_X86_64_PC32 early_idt_handler-0x4 ... 48: 66 90 xchg %ax,%ax 4a: 6a 08 pushq $0x8 4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51> 4d: R_X86_64_PC32 early_idt_handler-0x4 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: e9 00 00 00 00 jmpq 120 <early_idt_handler> 11c: R_X86_64_PC32 early_idt_handler-0x4 After: 0000000000000000 <early_idt_handler_array>: 0: 6a 00 pushq $0x0 2: 6a 00 pushq $0x0 4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common> ... 48: 6a 08 pushq $0x8 4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common> 4f: cc int3 50: cc int3 ... 117: 6a 00 pushq $0x0 119: 6a 1f pushq $0x1f 11b: eb 03 jmp 120 <early_idt_handler_common> 11d: cc int3 11e: cc int3 11f: cc int3 Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Binutils <binutils@sourceware.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-24Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"Takashi Iwai
This reverts commit 7290006d8c0900c56d8c58428134f02c35109d17. Through the regression report, it was revealed that the tpacpi_led_set() call to thinkpad_acpi helper doesn't only toggle the mute LED but actually mutes the sound. This is contradiction to the expectation, and rather confuses user. According to Henrique, it's not trivial to judge which TP model behaves "LED-only" and which model does whatever more intrusive, as Lenovo's implementations vary model by model. So, from the safety reason, we should revert the patch for now. Reported-by: Martin Steigerwald <martin@lichtvoll.de> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-24ALSA: usb-audio: Add quirk for MS LifeCam HD-3000Vittorio G (VittGam)
Microsoft LifeCam HD-3000 (045e:0779) needs a similar quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-23Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "One more fix from the timer departement: - Handle division of negative nanosecond values proper on 32bit. A recent cleanup wrecked the sign handling of the dividend and dropped the check for negative divisors" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Fix ktime_divns to do signed division
2015-05-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip fix from Thomas Gleixner: "A fix for a GIC-V3 irqchip regression which prevents some systems from booting" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gicv3-its: ITS table size should not be smaller than PSZ
2015-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two Ceph fixes from Sage Weil: "These fix an issue with the RBD notifications when there are topology changes in the cluster" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: Revert "libceph: clear r_req_lru_item in __unregister_linger_request()" libceph: request a new osdmap if lingering request maps to no osd
2015-05-23Merge branch 'for-linus-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "I fixed up a regression from 4.0 where conversion between different raid levels would sometimes bail out without converting. Filipe tracked down a race where it was possible to double allocate chunks on the drive. Mark has a fix for fiemap. All three will get bundled off for stable as well" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix regression in raid level conversion Btrfs: fix racy system chunk allocation when setting block group ro btrfs: clear 'ret' in btrfs_check_shared() loop
2015-05-23iio: adc: twl6030-gpadc: Fix modaliasAxel Lin
Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-23ARM: dts: set display clock correctly for exynos4412-trats2Inki Dae
This patch sets display clock correctly. If Display clock isn't set correctly then you would find below messages and Display controller doesn't work correctly. exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Fixes: abc0b1447d49 ("drm: Perform basic sanity checks on probed modes") Cc: <stable@vger.kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-05-22Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Radeon has two displayport fixes, one for a regression. i915 regression flicker fix needed so 4.0 can get fixed. A bunch of msm fixes and a bunch of exynos fixes, these two are probably a bit larger than I'd like, but most of them seems pretty good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) drm/radeon: fix error flag checking in native aux path drm/radeon: retry dcpd fetch drm/msm/mdp5: fix incorrect parameter for msm_framebuffer_iova() drm/exynos: dp: Lower level of EDID read success message drm/exynos: cleanup exynos_drm_plane drm/exynos: 'win' is always unsigned drm/exynos: mixer: don't dump registers under spinlock drm/exynos: Consolidate return statements in fimd_bind() drm/exynos: Constify exynos_drm_crtc_ops drm/exynos: Fix build breakage on !DRM_EXYNOS_FIMD drm/exynos: mixer: Constify platform_device_id drm/exynos: mixer: cleanup pixelformat handling drm/exynos: mixer: also allow NV21 for the video processor drm/exynos: mixer: remove buffer count handling in vp_video_buffer() drm/exynos: plane: honor buffer offset for dma_addr drm/exynos: fb: use drm_format_num_planes to get buffer count drm/i915: fix screen flickering drm/msm: fix locking inconsistencies in gpu->destroy() drm/msm/dsi: Simplify the code to get the number of read byte drm/msm: Attach assigned encoder to eDP and DSI connectors ...
2015-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ...
2015-05-22Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three small fixes that have been picked up the last few weeks. Specifically: - Fix a memory corruption issue in NVMe with malignant user constructed request. From Christoph. - Kill (now) unused blk_queue_bio(), dm was changed to not need this anymore. From Mike Snitzer. - Always use blk_schedule_flush_plug() from the io_schedule() path when flushing a plug, fixing a !TASK_RUNNING warning with md. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: sched: always use blk_schedule_flush_plug in io_schedule_out nvme: fix kernel memory corruption with short INQUIRY buffers block: remove export for blk_queue_bio
2015-05-22Merge tag 'md/4.1-rc4-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "I have a few more raid5 bugfixes pending, but I want them to get a bit more review first. In the meantime: - one serious RAID0 data corruption - caused by recent bugfix that wasn't reviewed properly. - one raid5 fix in new code (a couple more of those to come). - one little fix to stop static analysis complaining about silly rcu annotation" * tag 'md/4.1-rc4-fixes' of git://neil.brown.name/md: md/bitmap: remove rcu annotation from pointer arithmetic. md/raid0: fix restore to sector variable in raid0_make_request raid5: fix broken async operation chain
2015-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem. The main change is that we tell joydev not to touch "absolute mice", such as VMware virtual mouse, as that produced bad result (cursor stuck in upper right corner) with games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: smtpe-ts - wait 50mS until polling for pen-up Input: smtpe-ts - use msecs_to_jiffies() instead of HZ Input: joydev - don't classify the vmmouse as a joystick Input: vmmouse - do not reference non-existing version of X driver Input: alps - fix finger jumps on lifting 2 fingers on v7 touchpad Input: elantech - fix semi-mt protocol for v3 HW Input: sx8654 - fix memory allocation check
2015-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull another crypto fix from Herbert Xu: "Fix ICV corruption in s390/ghash when the same tfm is used by more than one thread" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s390/ghash - Fix incorrect ghash icv buffer handling.
2015-05-22bridge: fix lockdep splatEric Dumazet
Following lockdep splat was reported : [ 29.382286] =============================== [ 29.382315] [ INFO: suspicious RCU usage. ] [ 29.382344] 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 Not tainted [ 29.382380] ------------------------------- [ 29.382409] net/bridge/br_private.h:626 suspicious rcu_dereference_check() usage! [ 29.382455] other info that might help us debug this: [ 29.382507] rcu_scheduler_active = 1, debug_locks = 0 [ 29.382549] 2 locks held by swapper/0/0: [ 29.382576] #0: (((&p->forward_delay_timer))){+.-...}, at: [<ffffffff81139f75>] call_timer_fn+0x5/0x4f0 [ 29.382660] #1: (&(&br->lock)->rlock){+.-...}, at: [<ffffffffa0450dc1>] br_forward_delay_timer_expired+0x31/0x140 [bridge] [ 29.382754] stack backtrace: [ 29.382787] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.0-0.rc0.git11.1.fc23.x86_64 #1 [ 29.382838] Hardware name: LENOVO 422916G/LENOVO, BIOS A1KT53AUS 04/07/2015 [ 29.382882] 0000000000000000 3ebfc20364115825 ffff880666603c48 ffffffff81892d4b [ 29.382943] 0000000000000000 ffffffff81e124e0 ffff880666603c78 ffffffff8110bcd7 [ 29.383004] ffff8800785c9d00 ffff88065485ac58 ffff880c62002800 ffff880c5fc88ac0 [ 29.383065] Call Trace: [ 29.383084] <IRQ> [<ffffffff81892d4b>] dump_stack+0x4c/0x65 [ 29.383130] [<ffffffff8110bcd7>] lockdep_rcu_suspicious+0xe7/0x120 [ 29.383178] [<ffffffffa04520f9>] br_fill_ifinfo+0x4a9/0x6a0 [bridge] [ 29.383225] [<ffffffffa045266b>] br_ifinfo_notify+0x11b/0x4b0 [bridge] [ 29.383271] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383320] [<ffffffffa0450de8>] br_forward_delay_timer_expired+0x58/0x140 [bridge] [ 29.383371] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383416] [<ffffffff8113a033>] call_timer_fn+0xc3/0x4f0 [ 29.383454] [<ffffffff81139f75>] ? call_timer_fn+0x5/0x4f0 [ 29.383493] [<ffffffff8110a90f>] ? lock_release_holdtime.part.29+0xf/0x200 [ 29.383541] [<ffffffffa0450d90>] ? br_hold_timer_expired+0x70/0x70 [bridge] [ 29.383587] [<ffffffff8113a6a4>] run_timer_softirq+0x244/0x490 [ 29.383629] [<ffffffff810b68cc>] __do_softirq+0xec/0x670 [ 29.383666] [<ffffffff810b70d5>] irq_exit+0x145/0x150 [ 29.383703] [<ffffffff8189f506>] smp_apic_timer_interrupt+0x46/0x60 [ 29.383744] [<ffffffff8189d523>] apic_timer_interrupt+0x73/0x80 [ 29.383782] <EOI> [<ffffffff816f131f>] ? cpuidle_enter_state+0x5f/0x2f0 [ 29.383832] [<ffffffff816f131b>] ? cpuidle_enter_state+0x5b/0x2f0 Problem here is that br_forward_delay_timer_expired() is a timer handler, calling br_ifinfo_notify() which assumes either rcu_read_lock() or RTNL are held. Simplest fix seems to add rcu read lock section. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Dominick Grift <dac.override@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22net: core: 'ethtool' issue with querying phy settingsArun Parameswaran
When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by: Arun Parameswaran <aparames@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22bridge: fix parsing of MLDv2 reportsThadeu Lima de Souza Cascardo
When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.") Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22ARM: zynq: DT: Use the zynq binding with macbNathan Sullivan
Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22net: macb: Disable half duplex gigabit on ZynqNathan Sullivan
According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22net: macb: Document zynq gem dt bindingNathan Sullivan
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22ipv4: fill in table id when replacing a routeMichal Kubeček
When replacing an IPv4 route, tb_id member of the new fib_alias structure is not set in the replace code path so that the new route is ignored. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 14:56:48 +0000