summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-11net: mvpp2: Remove Pause and Asym_Pause supportStefan Chulski
Packet Processor hardware not connected to MAC flow control unit and cannot support TX flow control. This patch disable flow control support. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11dt-bindings: net: dwmac: fix queue priority documentationSeb Laveze
The priority field is not the queue priority (queue priority is fixed) but a bitmask of priorities assigned to this queue. In receive, priorities relate to tagged frames priorities. In transmit, priorities relate to PFC frames. Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attachJiri Olsa
The bpf_tracing_prog_attach error path calls bpf_prog_put on prog, which causes refcount underflow when it's called from link_create function. link_create prog = bpf_prog_get <-- get ... tracing_bpf_link_attach(prog.. bpf_tracing_prog_attach(prog.. out_put_prog: bpf_prog_put(prog); <-- put if (ret < 0) bpf_prog_put(prog); <-- put Removing bpf_prog_put call from bpf_tracing_prog_attach and making sure its callers call it instead. Fixes: 4a1e7c0c63e0 ("bpf: Support attaching freplace programs to multiple attach points") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210111191650.1241578-1-jolsa@kernel.org
2021-01-11Merge tag 'trace-v5.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Blacklist properly on all archs. The code to blacklist notrace functions for kprobes was not using the right kconfig option, which caused some archs (powerpc) to possibly not blacklist them" * tag 'trace-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Do the notrace functions check without kprobes on ftrace
2021-01-11Merge tag 'for-5.11-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "More material for stable trees. - tree-checker: check item end overflow - fix false warning during relocation regarding extent type - fix inode flushing logic, caused notable performance regression (since 5.10) - debugging fixups: - print correct offset for reloc tree key - pass reliable fs_info pointer to error reporting helper" * tag 'for-5.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: shrink delalloc pages instead of full inodes btrfs: reloc: fix wrong file extent type check to avoid false ENOENT btrfs: tree-checker: check if chunk item end overflows btrfs: prevent NULL pointer dereference in extent_io_tree_panic btrfs: print the actual offset in btrfs_root_name
2021-01-11scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp
When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-11i2c: tegra: Wait for config load atomically while in ISRMikko Perttunen
Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-11drm: Check actual format for legacy pageflip.Bas Nieuwenhuizen
With modifiers one can actually have different format_info structs for the same format, which now matters for AMDGPU since we convert implicit modifiers to explicit modifiers with multiple planes. I checked other drivers and it doesn't look like they end up triggering this case so I think this is safe to relax. Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 816853f9dc40 ("drm/amd/display: Set new format info for converted metadata.") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210110021142.28221-1-bas@basnieuwenhuizen.nl
2021-01-11tracing/kprobes: Do the notrace functions check without kprobes on ftraceMasami Hiramatsu
Enable the notrace function check on the architecture which doesn't support kprobes on ftrace but support dynamic ftrace. This notrace function check is not only for the kprobes on ftrace but also sw-breakpoint based kprobes. Thus there is no reason to limit this check for the arch which supports kprobes on ftrace. This also changes the dependency of Kconfig. Because kprobe event uses the function tracer's address list for identifying notrace function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether the target function is notrace or not. Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 45408c4f92506 ("tracing: kprobes: Prohibit probing on notrace function") Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-01-11drm/ttm: Fix address passed to dma_mapping_error() in ttm_pool_map()Jeremy Cline
check_unmap() is producing a warning about a missing map error check. The return value from dma_map_page() should be checked for an error, not the caller-provided dma_addr. Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/413432/ Signed-off-by: Christian König <christian.koenig@amd.com>
2021-01-11ACPI: scan: Harden acpi_device_add() against device ID overflowsDexuan Cui
Linux VM on Hyper-V crashes with the latest mainline: [ 4.069624] detected buffer overflow in strcpy [ 4.077733] kernel BUG at lib/string.c:1149! .. [ 4.085819] RIP: 0010:fortify_panic+0xf/0x11 ... [ 4.085819] Call Trace: [ 4.085819] acpi_device_add.cold.15+0xf2/0xfb [ 4.085819] acpi_add_single_object+0x2a6/0x690 [ 4.085819] acpi_bus_check_add+0xc6/0x280 [ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa [ 4.085819] acpi_walk_namespace+0x9a/0xc2 [ 4.085819] acpi_bus_scan+0x78/0x90 [ 4.085819] acpi_scan_init+0xfa/0x248 [ 4.085819] acpi_init+0x2c1/0x321 [ 4.085819] do_one_initcall+0x44/0x1d0 [ 4.085819] kernel_init_freeable+0x1ab/0x1f4 This is because of the recent buffer overflow detection in the commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Here acpi_device_bus_id->bus_id can only hold 14 characters, while the the acpi_device_hid(device) returns a 22-char string "HYPER_V_GEN_COUNTER_V1". Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8 chars. The field bus_id in struct acpi_device_bus_id was originally defined as char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI devices") Fix the issue by changing the field bus_id to const char *, and use kstrdup_const() to initialize it. Signed-off-by: Dexuan Cui <decui@microsoft.com> Tested-By: Jethro Beekman <jethro@fortanix.com> [ rjw: Subject change, whitespace adjustment ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-11Merge tag 'nfsd-5.11-1' of git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds
Pull nfsd fixes from Chuck Lever: - Fix major TCP performance regression - Get NFSv4.2 READ_PLUS regression tests to pass - Improve NFSv4 COMPOUND memory allocation - Fix sparse warning * tag 'nfsd-5.11-1' of git://git.linux-nfs.org/projects/cel/cel-2.6: NFSD: Restore NFSv4 decoding's SAVEMEM functionality SUNRPC: Handle TCP socket sends with kernel_sendpage() again NFSD: Fix sparse warning in nfssvc.c nfsd: Don't set eof on a truncated READ_PLUS nfsd: Fixes for nfsd4_encode_read_plus_data()
2021-01-11Merge tag 'hyperv-fixes-signed-20210111' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - fix kexec panic/hang (Dexuan Cui) - fix occasional crashes when flushing TLB (Wei Liu) * tag 'hyperv-fixes-signed-20210111' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: check cpu mask after interrupt has been disabled x86/hyperv: Fix kexec panic/hang issues
2021-01-11x86/sev-es: Handle string port IO to kernel memory properlyHyunwook (Wooky) Baek
Don't assume dest/source buffers are userspace addresses when manually copying data for string I/O or MOVS MMIO, as {get,put}_user() will fail if handed a kernel address and ultimately lead to a kernel panic. When invoking INSB/OUTSB instructions in kernel space in a SEV-ES-enabled VM, the kernel crashes with the following message: "SEV-ES: Unsupported exception in #VC instruction emulation - can't continue" Handle that case properly. [ bp: Massage commit message. ] Fixes: f980f9c31a92 ("x86/sev-es: Compile early handler code into kernel image") Signed-off-by: Hyunwook (Wooky) Baek <baekhw@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: David Rientjes <rientjes@google.com> Link: https://lkml.kernel.org/r/20210110071102.2576186-1-baekhw@google.com
2021-01-11Merge tag 'gvt-fixes-2020-01-08' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2020-01-08 - Fix VFIO EDID on APL/BXT (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108045911.GF15982@zhen-hp.sh.intel.com
2021-01-11drm/i915/icl: Fix initing the DSI DSC power refcount during HW readoutImre Deak
For an enabled DSC during HW readout the corresponding power reference is taken along the CRTC power domain references in get_crtc_power_domains(). Remove the incorrect get ref from the DSI encoder hook. Fixes: 2b68392e638d ("drm/i915/dsi: add support for DSC") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com (cherry picked from commit 3a9ec563a4ff770ae647f6ee539810f1866866c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-11mmc: sdhci-xenon: fix 1.8v regulator stabilizationAlex Leibovich
Automatic Clock Gating is a feature used for the power consumption optimisation. It turned out that during early init phase it may prevent the stable voltage switch to 1.8V - due to that on some platforms an endless printout in dmesg can be observed: "mmc1: 1.8V regulator output did not became stable" Fix the problem by disabling the ACG at very beginning of the sdhci_init and let that be enabled later. Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") Signed-off-by: Alex Leibovich <alexl@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201211141656.24915-1-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-01-11mmc: sdhci-of-dwcmshc: fix rpmb accessJisheng Zhang
Commit a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB") began to use ACMD23 for RPMB if the host supports ACMD23. In RPMB ACM23 case, we need to set bit 31 to CMD23 argument, otherwise RPMB write operation will return general fail. However, no matter V4 is enabled or not, the dwcmshc's ARGUMENT2 register is 32-bit block count register which doesn't support stuff bits of CMD23 argument. So let's handle this specific ACMD23 case. From another side, this patch also prepare for future v4 enabling for dwcmshc, because from the 4.10 spec, the ARGUMENT2 register is redefined as 32bit block count which doesn't support stuff bits of CMD23 argument. Fixes: a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201229161625.38255233@xhacker.debian Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-01-11io_uring: don't take files/mm for a dead taskPavel Begunkov
In rare cases a task may be exiting while io_ring_exit_work() trying to cancel/wait its requests. It's ok for __io_sq_thread_acquire_mm() because of SQPOLL check, but is not for __io_sq_thread_acquire_files(). Play safe and fail for both of them. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-11io_uring: drop mm and files after task_work_runPavel Begunkov
__io_req_task_submit() run by task_work can set mm and files, but io_sq_thread() in some cases, and because __io_sq_thread_acquire_mm() and __io_sq_thread_acquire_files() do a simple current->mm/files check it may end up submitting IO with mm/files of another task. We also need to drop it after in the end to drop potentially grabbed references to them. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-11kthread: remove comments about old _do_fork() helperYanfei Xu
The old _do_fork() helper has been removed in favor of kernel_clone(). Here correct some comments which still contain _do_fork() Link: https://lore.kernel.org/r/20210111104807.18022-1-yanfei.xu@windriver.com Cc: christian@brauner.io Cc: linux-kernel@vger.kernel.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-11Kernel: fork.c: Fix coding style: Do not use {} around single-line statementsAlexander Guril
Fixed two coding style issues in kernel/fork.c Do not use {} around single-line statements. Cc: linux-kernel@vger.kernel.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Alexander Guril <alexander.guril02@gmail.com> Link: https://lore.kernel.org/r/20201226114021.2589-1-alexander.guril02@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-11signal: Add missing __user annotation to copy_siginfo_from_user_anyJann Horn
copy_siginfo_from_user_any() takes a userspace pointer as second argument; annotate the parameter type accordingly. Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20201207000252.138564-1-jannh@google.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-11drm/i915/backlight: fix CPU mode backlight takeover on LPTJani Nikula
The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight() functions operate directly on the hardware registers. If inverting the value is needed, using intel_panel_compute_brightness(), it should only be done in the interface between hardware registers and panel->backlight.level. The CPU mode takeover code added in commit 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the hardware register and converts to panel->backlight.level correctly, however the value written back should remain in the hardware register "domain". This hasn't been an issue, because GM45 machines are the only known users of i915.invert_brightness and the brightness invert quirk, and without one of them no conversion is made. It's likely nobody's ever hit the problem. Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com (cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-11drm/i915: Disable RPM wakeref assertions during driver shutdownChris Wilson
As with the regular suspend paths, also disable the wakeref assertions as we disable the driver during shutdown. Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899 Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk (cherry picked from commit 19fe4ac6f0e7163daf9375a4d39947389ae465fa) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-11drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is ↵Hans de Goede
no reset-deassert MIPI-sequence Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") added an intel_dsi_msleep() helper which skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode; and it moved a bunch of msleep-s over to this new helper. This was based on my reading of the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries. Given that this code has been used on a lot of different devices without issues until now, it seems that my interpretation of the spec here is mostly correct. But now I have encountered one device, an Acer Aspire Switch 10 E SW3-016, where the panel will not light up unless we do actually honor the panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence. What seems to set this model apart is that it is lacking a MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on delay usually happens. Fix the panel not lighting up on this model by using an unconditional msleep(panel_on_delay) instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence. Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com (cherry picked from commit 6fdb335f1c9c0845b50625de1624d8445c4c4a07) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-11netfilter: nf_nat: Fix memleak in nf_nat_initDinghao Liu
When register_pernet_subsys() fails, nf_nat_bysource should be freed just like when nf_ct_extend_register() fails. Fixes: 1cd472bf036ca ("netfilter: nf_nat: add nat hook register functions to nf_nat") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-10Linux 5.11-rc3v5.11-rc3Linus Torvalds
2021-01-10NFS: nfs_igrab_and_active must first reference the superblockTrond Myklebust
Before referencing the inode, we must ensure that the superblock can be referenced. Otherwise, we can end up with iput() calling superblock operations that are no longer valid or accessible. Fixes: ea7c38fef0b7 ("NFSv4: Ensure we reference the inode for return-on-close in delegreturn") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10NFS: nfs_delegation_find_inode_server must first reference the superblockTrond Myklebust
Before referencing the inode, we must ensure that the superblock can be referenced. Otherwise, we can end up with iput() calling superblock operations that are no longer valid or accessible. Fixes: e39d8a186ed0 ("NFSv4: Fix an Oops during delegation callbacks") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10Merge tag 'kbuild-fixes-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Search for <ncurses.h> in the default header path of HOSTCC - Tweak the option order to be kind to old BSD awk - Remove 'kvmconfig' and 'xenconfig' shorthands - Fix documentation * tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: kbuild: Fix section reference kconfig: remove 'kvmconfig' and 'xenconfig' shorthands lib/raid6: Let $(UNROLL) rules work with macOS userland kconfig: Support building mconf with vendor sysroot ncurses kconfig: config script: add a little user help MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
2021-01-10Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two driver fixes (megaraid_sas and hisi_sas). The megaraid one is a revert of a previous revert of a cpu hotplug fix which exposed a bug in the block layer which has been fixed in this merge window. The hisi_sas performance enhancement comes from switching to interrupt managed completion queues, which depended on the addition of devm_platform_get_irqs_affinity() which is now upstream via the irq tree in the last merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Expose HW queues for v2 hw Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""
2021-01-10Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Missing CRC32 selections (Arnd) - Fix for a merge window regression with bdev inode init (Christoph) - bcache fixes - rnbd fixes - NVMe pull request from Christoph: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im) - Use-after-free fix for partition iteration (Ming) - Missing blk-mq debugfs flag annotation (John) - Bdev freeze regression fix (Satya) - blk-iocost NULL pointer deref fix (Tejun) * tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits) bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket bcache: check unsupported feature sets for bcache register bcache: fix typo from SUUP to SUPP in features.h bcache: set pdev_set_uuid before scond loop iteration blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED block/rnbd-clt: avoid module unload race with close confirmation block/rnbd: Adding name to the Contributors List block/rnbd-clt: Fix sg table use after free block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close block/rnbd: Select SG_POOL for RNBD_CLIENT block: pre-initialize struct block_device in bdev_alloc_inode fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings ...
2021-01-10Merge tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A bit larger than I had hoped at this point, but it's all changes that will be directed towards stable anyway. In detail: - Fix a merge window regression on error return (Matthew) - Remove useless variable declaration/assignment (Ye Bin) - IOPOLL fixes (Pavel) - Exit and cancelation fixes (Pavel) - fasync lockdep complaint fix (Pavel) - Ensure SQPOLL is synchronized with creator life time (Pavel)" * tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block: io_uring: stop SQPOLL submit on creator's death io_uring: add warn_once for io_uring_flush() io_uring: inline io_uring_attempt_task_drop() io_uring: io_rw_reissue lockdep annotations io_uring: synchronise ev_posted() with waitqueues io_uring: dont kill fasync under completion_lock io_uring: trigger eventfd for IOPOLL io_uring: Fix return value from alloc_fixed_file_ref_node io_uring: Delete useless variable ‘id’ in io_prep_async_work io_uring: cancel more aggressively in exit_work io_uring: drop file refs after task cancel io_uring: patch up IOPOLL overflow_flush sync io_uring: synchronise IOPOLL on task_submit fail
2021-01-10Merge tag 'usb-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.11-rc3. Include in here are: - USB gadget driver fixes for reported issues - new usb-serial driver ids - dma from stack bugfixes - typec bugfixes - dwc3 bugfixes - xhci driver bugfixes - other small misc usb driver bugfixes All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: dwc3: gadget: Clear wait flag on dequeue usb: typec: Send uevent for num_altmodes update usb: typec: Fix copy paste error for NVIDIA alt-mode description usb: gadget: enable super speed plus kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb usb: uas: Add PNY USB Portable SSD to unusual_uas usb: gadget: configfs: Preserve function ordering after bind failure usb: gadget: select CONFIG_CRC32 usb: gadget: core: change the comment for usb_gadget_connect usb: gadget: configfs: Fix use-after-free issue with udc_name usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup usb: usbip: vhci_hcd: protect shift size USB: usblp: fix DMA to stack USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug usb: gadget: f_uac2: reset wMaxPacketSize usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ...
2021-01-10Merge tag 'staging-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.11-rc3. Nothing major, just resolving some reported issues: - cleanup some remaining mentions of the ION drivers that were removed in 5.11-rc1 - comedi driver bugfix - two error path memory leak fixes All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ION: remove some references to CONFIG_ION staging: mt7621-dma: Fix a resource leak in an error handling path Staging: comedi: Return -EFAULT if copy_to_user() fails staging: spmi: hisi-spmi-controller: Fix some error handling paths
2021-01-10Merge tag 'char-misc-5.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ...
2021-01-11Documentation: kbuild: Fix section referenceViresh Kumar
Section 3.11 was incorrectly called 3.9, fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-10Merge tag 'arc-5.11-rc3-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Address the 2nd boot failure due to snafu in signal handling code (first was generic console ttynull issue) - misc other fixes * tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [hsdk]: Enable FPU_SAVE_RESTORE ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling include/soc: remove headers for EZChip NPS arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC
2021-01-10Merge tag 'powerpc-5.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for machine check handling with VMAP stack on 32-bit. - A clang build fix. Thanks to Christophe Leroy and Nathan Chancellor. * tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Handle .text.{hot,unlikely}.* in linker script powerpc/32s: Fix RTAS machine check with VMAP stack
2021-01-10Merge tag 'x86_urgent_for_v5.11_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "As expected, fixes started trickling in after the holidays so here is the accumulated pile of x86 fixes for 5.11: - A fix for fanotify_mark() missing the conversion of x86_32 native syscalls which take 64-bit arguments to the compat handlers due to former having a general compat handler. (Brian Gerst) - Add a forgotten pmd page destructor call to pud_free_pmd_page() where a pmd page is freed. (Dan Williams) - Make IN/OUT insns with an u8 immediate port operand handling for SEV-ES guests more precise by using only the single port byte and not the whole s32 value of the insn decoder. (Peter Gonda) - Correct a straddling end range check before returning the proper MTRR type, when the end address is the same as top of memory. (Ying-Tsun Huang) - Change PQR_ASSOC MSR update scheme when moving a task to a resctrl resource group to avoid significant performance overhead with some resctrl workloads. (Fenghua Yu) - Avoid the actual task move overhead when the task is already in the resource group. (Fenghua Yu)" * tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Don't move a task to the same resource group x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR x86/mtrr: Correct the range check before performing MTRR type lookups x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling x86/mm: Fix leak of pmd ptlock fanotify: Fix sys_fanotify_mark() on native x86-32
2021-01-10NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counterTrond Myklebust
If we exit _lgopen_prepare_attached() without setting a layout, we will currently leak the plh_outstanding counter. Fixes: 411ae722d10a ("pNFS: Wait for stale layoutget calls to complete in pnfs_update_layout()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()Trond Myklebust
We must ensure that we pass a layout segment to nfs_retry_commit() when we're cleaning up after pnfs_bucket_alloc_ds_commits(). Otherwise, requests that should be committed to the DS will get committed to the MDS. Do so by ensuring that pnfs_bucket_get_committing() always tries to return a layout segment when it returns a non-empty page list. Fixes: c84bea59449a ("NFS/pNFS: Simplify bucket layout segment reference counting") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the requestTrond Myklebust
In pnfs_generic_clear_request_commit(), we try calling pnfs_free_bucket_lseg() before we remove the request from the DS bucket. That will always fail, since the point is to test for whether or not that bucket is empty. Fixes: c84bea59449a ("NFS/pNFS: Simplify bucket layout segment reference counting") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10pNFS: Stricter ordering of layoutget and layoutreturnTrond Myklebust
If a layout return is in progress, we should wait for it to complete, in case the layout segment we are picking up gets returned too. Fixes: 30cb3ee299cb ("pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10pNFS: Clean up pnfs_layoutreturn_free_lsegs()Trond Myklebust
Remove the check for whether or not the stateid is NULL, and fix up the callers. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10pNFS: We want return-on-close to complete when evicting the inodeTrond Myklebust
If the inode is being evicted, it should be safe to run return-on-close, so we should do it to ensure we don't inadvertently leak layout segments. Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10pNFS: Mark layout for return if return-on-close was not sentTrond Myklebust
If the layout return-on-close failed because the layoutreturn was never sent, then we should mark the layout for return again. Fixes: 9c47b18cf722 ("pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10net: sunrpc: interpret the return value of kstrtou32 correctlyj.nixdorf@avm.de
A return value of 0 means success. This is documented in lib/kstrtox.c. This was found by trying to mount an NFS share from a link-local IPv6 address with the interface specified by its index: mount("[fe80::1%1]:/srv/nfs", "/mnt", "nfs", 0, "nolock,addr=fe80::1%1") Before this commit this failed with EINVAL and also caused the following message in dmesg: [...] NFS: bad IP address specified: addr=fe80::1%1 The syscall using the same address based on the interface name instead of its index succeeds. Credits for this patch go to my colleague Christian Speich, who traced the origin of this bug to this line of code. Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de> Fixes: 00cfaa943ec3 ("replace strict_strto calls") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10NFS: Adjust fs_context error loggingScott Mayhew
Several existing dprink()/dfprintk() calls were converted to use the new mount API logging macros by commit ce8866f0913f ("NFS: Attach supplementary error information to fs_context"). If the fs_context was not created using fsopen() then it will not have had a log buffer allocated for it, and the new mount API logging macros will wind up calling printk(). This can result in syslog messages being logged where previously there were none... most notably "NFS4: Couldn't follow remote path", which can happen if the client is auto-negotiating a protocol version with an NFS server that doesn't support the higher v4.x versions. Convert the nfs_errorf(), nfs_invalf(), and nfs_warnf() macros to check for the existence of the fs_context's log buffer and call dprintk() if it doesn't exist. Add nfs_ferrorf(), nfs_finvalf(), and nfs_warnf(), which do the same thing but take an NFS debug flag as an argument and call dfprintk(). Finally, modify the "NFS4: Couldn't follow remote path" message to use nfs_ferrorf(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207385 Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Fixes: ce8866f0913f ("NFS: Attach supplementary error information to fs_context.") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit (git 2.34.1) at 2025-09-12 23:08:25 +0000