| Age | Commit message (Collapse) | Author |
|---|
|
The firmware cache mechanism serves two purposes, the secondary purpose is
not well documented nor understood. This fixes a regression with the
secondary purpose of the firmware cache mechanism: batched requests on
successful lookups. Without this fix *any* time a batched request is
triggered, secondary requests for which the batched request mechanism
was designed for will seem to last forver and seem to never return.
This issue is present for all kernel builds possible, and a hard reset
is required.
The firmware cache is used for:
1) Addressing races with file lookups during the suspend/resume cycle
by keeping firmware in memory during the suspend/resume cycle
2) Batched requests for the same file rely only on work from the first file
lookup, which keeps the firmware in memory until the last
release_firmware() is called
Batched requests *only* take effect if secondary requests come in prior to
the first user calling release_firmware(). The devres name used for the
internal firmware cache is used as a hint other pending requests are
ongoing, the firmware buffer data is kept in memory until the last user of
the buffer calls release_firmware(), therefore serializing requests and
delaying the release until all requests are done.
Batched requests wait for a wakup or signal so we can rely on the first file
fetch to write to the pending secondary requests. Commit 5b029624948d
("firmware: do not use fw_lock for fw_state protection") ported the firmware
API to use swait, and in doing so failed to convert complete_all() to
swake_up_all() -- it used swake_up(), loosing the ability for *some* batched
requests to take effect.
We *could* fix this by just using swake_up_all() *but* swait is now known
to be very special use case, so its best to just move away from it. So we
just go back to using completions as before commit 5b029624948d ("firmware:
do not use fw_lock for fw_state protection") given this was using
complete_all().
Without this fix it has been reported plugging in two Intel 6260 Wifi cards
on a system will end up enumerating the two devices only 50% of the time
[0]. The ported swake_up() should have actually handled the case with two
devices, however, *if more than two cards are used* the swake_up() would
not have sufficed. This change is only part of the required fixes for
batched requests. Another fix is provided in the next patch.
This particular change should fix the cases where more than three requests
with the same firmware name is used, otherwise batched requests will wait
for MAX_SCHEDULE_TIMEOUT and just timeout eventually.
Below is a summary of tests triggering batched requests on different
kernel builds.
Before this patch:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
After this patch:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
[0] https://bugzilla.kernel.org/show_bug.cgi?id=195477
CC: <stable@vger.kernel.org> [4.10+]
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 5b029624948d ("firmware: do not use fw_lock for fw_state protection")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As we cannot have an exclusive stream set if the perf has not been
initialized, we only need to check for that exclusive stream.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-3-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
|
|
This is called from execlist context init which we need to be unlocked.
Commit f89823c21224 ("drm/i915/perf: Implement
I915_PERF_ADD/REMOVE_CONFIG interface") added a lockdep assert to this
path for unclear reasons, remove it again!
Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
|
|
Another case where we need to call sysfs_attr_init() to setup the
internal lockdep class prior to use:
[ 9.325229] BUG: key ffff880168bc7bb0 not in .data!
[ 9.325240] DEBUG_LOCKS_WARN_ON(1)
[ 9.325250] ------------[ cut here ]------------
[ 9.325280] WARNING: CPU: 1 PID: 275 at kernel/locking/lockdep.c:3156 lockdep_init_map+0x1b2/0x1c0
[ 9.325301] Modules linked in: intel_powerclamp(+) coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915(+) snd_hda_intel snd_hda_codec snd_hwdep r8169 mii snd_hda_core snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel
[ 9.325375] CPU: 1 PID: 275 Comm: modprobe Not tainted 4.13.0-rc4-CI-Trybot_1040+ #1
[ 9.325395] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0045.B51.1704281422 04/28/2017
[ 9.325422] task: ffff8801721a4ec0 task.stack: ffffc900001dc000
[ 9.325440] RIP: 0010:lockdep_init_map+0x1b2/0x1c0
[ 9.325456] RSP: 0018:ffffc900001dfa10 EFLAGS: 00010282
[ 9.325473] RAX: 0000000000000016 RBX: ffff880168d54b80 RCX: 0000000000000000
[ 9.325488] RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0800
[ 9.325505] RBP: ffffc900001dfa30 R08: 0000000000000001 R09: 0000000000000000
[ 9.325521] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880168bc7bb0
[ 9.325537] R13: 0000000000000000 R14: ffff880168bc7b98 R15: ffffffff81a263a0
[ 9.325554] FS: 00007fb60c3fd700(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000
[ 9.325574] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.325588] CR2: 0000006582777d80 CR3: 000000016d818000 CR4: 00000000003406e0
[ 9.325604] Call Trace:
[ 9.325618] __kernfs_create_file+0x76/0xe0
[ 9.325632] sysfs_add_file_mode_ns+0x8a/0x1a0
[ 9.325646] internal_create_group+0xea/0x2c0
[ 9.325660] sysfs_create_group+0x13/0x20
[ 9.325737] i915_perf_register+0xde/0x220 [i915]
[ 9.325800] i915_driver_load+0xa77/0x16c0 [i915]
[ 9.325863] i915_pci_probe+0x37/0x90 [i915]
[ 9.325880] pci_device_probe+0xa8/0x130
[ 9.325894] driver_probe_device+0x29c/0x450
[ 9.325908] __driver_attach+0xe3/0xf0
[ 9.325922] ? driver_probe_device+0x450/0x450
[ 9.325935] bus_for_each_dev+0x62/0xa0
[ 9.325948] driver_attach+0x1e/0x20
[ 9.325960] bus_add_driver+0x173/0x270
[ 9.325974] driver_register+0x60/0xe0
[ 9.325986] __pci_register_driver+0x60/0x70
[ 9.326044] i915_init+0x6f/0x78 [i915]
[ 9.326066] ? 0xffffffffa024e000
[ 9.326079] do_one_initcall+0x43/0x170
[ 9.326094] ? rcu_read_lock_sched_held+0x7a/0x90
[ 9.326109] ? kmem_cache_alloc_trace+0x261/0x2d0
[ 9.326124] do_init_module+0x5f/0x206
[ 9.326137] load_module+0x2561/0x2da0
[ 9.326150] ? show_coresize+0x30/0x30
[ 9.326165] ? kernel_read_file+0x105/0x190
[ 9.326180] SyS_finit_module+0xc1/0x100
[ 9.326192] ? SyS_finit_module+0xc1/0x100
[ 9.326210] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 9.326223] RIP: 0033:0x7fb60bf359f9
[ 9.326234] RSP: 002b:00007fff92b47c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 9.326255] RAX: ffffffffffffffda RBX: ffffffff814898a3 RCX: 00007fb60bf359f9
[ 9.326271] RDX: 0000000000000000 RSI: 00000028a9ceef8b RDI: 0000000000000000
[ 9.326287] RBP: ffffc900001dff88 R08: 0000000000000000 R09: 0000000000000000
[ 9.326303] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000040000
[ 9.326319] R13: 00000028aaef2a70 R14: 0000000000000000 R15: 00000028aaeee5d0
[ 9.326339] ? __this_cpu_preempt_check+0x13/0x20
[ 9.326353] Code: f1 39 00 85 c0 0f 84 38 ff ff ff 83 3d 9f 44 ce 01 00 0f 85 2b ff ff ff 48 c7 c6 b2 a2 c7 81 48 c7 c7 53 40 c5 81 e8 3f 82 01 00 <0f> ff e9 11 ff ff ff 0f 1f 80 00 00 00 00 55 31 c9 31 d2 31 f6
Fixes: 701f8231a2fe ("drm/i915/perf: prune OA configs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-1-chris@chris-wilson.co.uk
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
This is not to try to force a new style; this is my interpretation of
what the most common existing style is.
With hopes I don't need to answer so many questions about style going
forward.
Start a new style section in the i915 document to bolt the register
style guide into.
v2: vertical alignment, incorporate to kernel-doc, and more
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9de4a5b1bea4e76461c70a1dd66751581de0124f.1502368010.git.jani.nikula@intel.com
|
|
Revert to a normal comment, as the enum isn't properly documented
anyway.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2c44a0aa00ea7d9b71e7a3183a7507f98811146.1502368010.git.jani.nikula@intel.com
|
|
Remove old warning about docproc directive that's not supported in the
Sphinx toolchain.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7fc8a110b78a9dc9a585dce643b68b4200b7e793.1502368010.git.jani.nikula@intel.com
|
|
This adds a new ATEN device id for a new pl2303-based device.
Reported-by: Peter Kuo <PeterKuo@aten.com.tw>
Cc: stable <stable@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to
connect to Realtek r8153.
The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk
can make it work.
Since another r8153 dongle at my hand does not have the issue, so add
the quirk to the Genesys Logic hub instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some buggy USB disk adapters disconnect and reconnect multiple times
during the enumeration procedure. This may lead to a device
connecting at full speed instead of high speed, because when the USB
stack sees that a device isn't able to enumerate at high speed, it
tries to hand the connection over to a full-speed companion
controller.
The logic for doing this is careful to check that the device is still
connected. But this check is inadequate if the device disconnects and
reconnects before the check is done. The symptom is that a device
works, but much more slowly than it is capable of operating.
The situation was made worse recently by commit 22547c4cc4fe ("usb:
hub: Wait for connection to be reestablished after port reset"), which
increases the delay following a reset before a disconnect is
recognized, thus giving the device more time to reconnect.
This patch makes the check more robust. If the device was
disconnected at any time during enumeration, we will now skip the
full-speed handover.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Certain HP keyboards would keep inputting a character automatically which
is the wake-up key after S3 resume
On some AMD platforms USB host fails to respond (by holding resume-K) to
USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures
that resume is signaled for at least 20 ms (TDRSMDN), which is defined in
USB 2.0 spec. The result is that the keyboard is out of function.
In SNPS USB design, the host responds to the resume request only after
system gets back to S0 and the host gets to functional after the internal
HW restore operation that is more than 1 second after the initial resume
request from the USB device.
As a workaround for specific keyboard ID(HP Keyboards), applying port reset
after resume when the keyboard is plugged in.
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Conflicts:
include/rdma/ib_verbs.h - Modified a function signature adjacent
to a newly added function signature from a previous merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Both add new code
include/rdma/ib_verbs.h - Both add new code
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The numd field of directive receive command takes number of dwords to
transfer. This fix has the correct calculation for numd.
Signed-off-by: Kwan (Hingkwan) Huen-SSI <kwan.huen@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We need to return an error if a timeout occurs on any NVMe command during
initialization. Without this, the nvme reset work will be stuck. A timeout
will have a negative error code, meaning we need to stop initializing
the controller. All postitive returns mean the controller is still usable.
bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196325
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Martin Peres <martin.peres@intel.com>
[jth consolidated cleanup path ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma into rdma-netlink
RDMA netlink infrastructure v2
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.
2) Fix stats handling in bcm_sysport_get_stats(), from Florian
Fainelli.
3) Reject 16777215 VNI value in geneve_validate(), from Girish
Moodalbail.
4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.
5) Once a UFO fragmented frame is treated as UFO, we should continue
doing so. Likewise once a frame has been segmented, we should
continue doing that and not try to convert it to a UFO frame. From
Willem de Bruijn.
6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
prevent races. From Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
packet: fix tp_reserve race in packet_set_ring
udp: consistently apply ufo or fragmentation
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
igmp: Fix regression caused by igmp sysctl namespace code.
geneve: maximum value of VNI cannot be used
net: systemport: Fix software statistics for SYSTEMPORT Lite
tipc: remove premature ESTABLISH FSM event at link synchronization
|
|
This was based on a patch originally by Kristian. It has been modified
pretty heavily to use the new callbacks from the previous patch.
v2:
- Add LINEAR and Yf modifiers to list (Ville)
- Combine i8xx and i965 into one list of formats (Ville)
- Allow 1010102 formats for Y/Yf tiled (Ville)
v3:
- Handle cursor formats (Ville)
- Put handling for LINEAR in the mod_support functions (Ville)
v4:
- List each modifier explicitly in supported modifiers (Ville)
- Handle the CURSOR plane (Ville)
v5:
- Split out cursor and sprite handling (Ville)
v6:
- Actually use the sprite funcs (Emil)
- Use unreachable (Emil)
v7:
- Only allow Intel modifiers and LINEAR (Ben)
v8
- Fix spite assert introduced in v6 (Daniel)
v9
- Change vendor check logic to avoid magic 56 (Emil)
- Reorder skl_mod_support (Ville)
- make intel_plane_funcs static, could be done as of v5 (Ville)
- rename local variable intel_format_modifiers to modifiers (Ville)
- actually use sprite modifiers
- split out modifier/formats by platform (Ville)
v10:
- Undo vendor check from v9
v11:
- Squash CCS advertisement into this patch (daniels)
- Don't advertise CCS on higher sprite planes (daniels)
v12:
- Don't advertise Y-tiled or CCS on any sprite planes, since we don't
allocate enough DDB space for it to work. (daniels)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v8)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes
which parts of the main surface are compressed and which are not. The
location of CCS is provided by userspace as just another plane with its
own offset.
Add the required stuff to validate the user provided AUX plane metadata
and convert the user provided linear offset into something the hardware
can consume.
Due to hardware limitations we require that the main surface and
the AUX surface (CCS) be part of the same bo. The hardware also
makes life hard by not allowing you to provide separate x/y offsets
for the main and AUX surfaces (excpet with NV12), so finding suitable
offsets for both requires a bit of work. Assuming we still want keep
playing tricks with the offsets. I've just gone with a dumb "search
backward for suitable offsets" approach, which is far from optimal,
but it works.
Also not all planes will be capable of scanning out compressed surfaces,
and eg. 90/270 degree rotation is not supported in combination with
decompression either.
This patch may contain work from at least the following people:
* Vandana Kannan <vandana.kannan@intel.com>
* Daniel Vetter <daniel@ffwll.ch>
* Ben Widawsky <ben@bwidawsk.net>
v2: Deal with display workarounds 0390, 0531, 1125 (Paulo)
v3: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
Put the AUX register defines to the correct place
Fix up the slightly bogus rotation check
v4: Use I915_WRITE_FW() due to plane update locking changes
s/return -EINVAL/goto err/ in intel_framebuffer_init()
Eliminate a bunch hardcoded numbers in CCS code
v5: (By Ben)
conflict resolution +
- res_blocks += fixed_16_16_to_u32_round_up(y_tile_minimum);
+ res_blocks += fixed16_to_u32_round_up(y_tile_minimum);
v6: (daniels) Fix botched commit message.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170801165817.7063-1-ben@bwidawsk.net
|
|
SKL+ display engine can scan out certain kinds of compressed surfaces
produced by the render engine. This involved telling the display engine
the location of the color control surfae (CCS) which describes which
parts of the main surface are compressed and which are not. The location
of CCS is provided by userspace as just another plane with its own offset.
By providing our own format information for the CCS formats, we should
be able to make framebuffer_check() do the right thing for the CCS
surface as well.
Note that we'll return the same format info for both Y and Yf tiled
format as that's what happens with the non-CCS Y vs. Yf as well. If
desired, we could potentially return a unique pointer for each
pixel_format+tiling+ccs combination, in which case we immediately be
able to tell if any of that stuff changed by just comparing the
pointers. But that does sound a bit wasteful space wise.
v2: Drop the 'dev' argument from the hook
v3: Include the description of the CCS surface layout
v4: Pretend CCS tiles are regular 128 byte wide Y tiles (Jason)
v5: Re-drop 'dev', fix commit message, add missing drm_fourcc.h
description of CCS layout. (daniels)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net> (v3)
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
Updates to tp_reserve can race with reads of the field in
packet_set_ring. Avoid this by holding the socket lock during
updates in setsockopt PACKET_RESERVE.
This bug was discovered by syzkaller.
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When iteratively building a UDP datagram with MSG_MORE and that
datagram exceeds MTU, consistently choose UFO or fragmentation.
Once skb_is_gso, always apply ufo. Conversely, once a datagram is
split across multiple skbs, do not consider ufo.
Sendpage already maintains the first invariant, only add the second.
IPv6 does not have a sendpage implementation to modify.
A gso skb must have a partial checksum, do not follow sk_no_check_tx
in udp_send_skb.
Found by syzkaller.
Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull sparc updates from David Miller:
1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.
2) Prevent crashes when bringing up sunvdc virtual block devices in
some environments. From Jim Quigley.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
sparc64: recognize and support sparc M8 cpu type
sparc64: properly name the cpu constants
|
|
Ben Widawsky/Daniel Stone need the extended modifier support from
drm-misc to be able to merge CCS support for i915.ko
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
For systems with X86_FEATURE_TOPOEXT, current logic uses the APIC ID
to calculate shared_cpu_map. However, APIC IDs are not guaranteed to
be contiguous for cores across different L3s (e.g. family17h system
w/ downcore configuration). This breaks the logic, and results in an
incorrect L3 shared_cpu_map.
Instead, always use the previously calculated cpu_llc_shared_mask of
each CPU to derive the L3 shared_cpu_map.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170731085159.9455-3-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Current cpu_core_id fixup causes downcored F17h configurations to be
incorrect:
NODE: 0
processor 0 core id : 0
processor 1 core id : 1
processor 2 core id : 2
processor 3 core id : 4
processor 4 core id : 5
processor 5 core id : 0
NODE: 1
processor 6 core id : 2
processor 7 core id : 3
processor 8 core id : 4
processor 9 core id : 0
processor 10 core id : 1
processor 11 core id : 2
Code that relies on the cpu_core_id, like match_smt(), for example,
which builds the thread siblings masks used by the scheduler, is
mislead.
So, limit the fixup to pre-F17h machines. The new value for cpu_core_id
for F17h and later will represent the CPUID_Fn8000001E_EBX[CoreId],
which is guaranteed to be unique for each core within a socket.
This way we have:
NODE: 0
processor 0 core id : 0
processor 1 core id : 1
processor 2 core id : 2
processor 3 core id : 4
processor 4 core id : 5
processor 5 core id : 6
NODE: 1
processor 6 core id : 8
processor 7 core id : 9
processor 8 core id : 10
processor 9 core id : 12
processor 10 core id : 13
processor 11 core id : 14
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[ Heavily massaged. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: http://lkml.kernel.org/r/20170731085159.9455-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So I was looking at text_poke_bp() today and I couldn't make sense of
the barriers there.
How's for something like so?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: masami.hiramatsu.pt@hitachi.com
Link: http://lkml.kernel.org/r/20170731102154.f57cvkjtnbmtctk6@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While parsing the msi-parent property to chase up the IRQ domain
a given device belongs to, the index into the msi-parent tuple should
be incremented to ensure all properties entries are taken into account.
Current code missed the index update so the parsing loop does not work
in case multiple msi-parent phandles are present and may turn into
an infinite loop in of_pmsi_get_dev_id() if phandle at index 0 does
not correspond to the domain we are actually looking-up.
Fix the code by updating the phandle index at each iteration in
of_pmsi_get_dev_id().
Fixes: deac7fc1c87f ("irqchip/gic-v3-its: Parse new version of msi-parent property")
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
When enabling ITS NUMA support on D05, I got the boot log:
[ 0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> ITS 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> ITS 2 -> Node 0
[ 0.000000] SRAT: PXM 1 -> ITS 3 -> Node 1
[ 0.000000] SRAT: ITS affinity exceeding max count[4]
This is wrong on D05 as we have 8 ITSs with 4 NUMA nodes.
So dynamically alloc the memory needed instead of using
its_srat_maps[MAX_NUMNODES], which count the number of
ITS entry(ies) in SRAT and alloc its_srat_maps as needed,
then build the mapping of numa node to ITS ID. Of course,
its_srat_maps will be freed after ITS probing because
we don't need that after boot.
After doing this, I got what I wanted:
[ 0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> ITS 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> ITS 2 -> Node 0
[ 0.000000] SRAT: PXM 1 -> ITS 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> ITS 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> ITS 5 -> Node 2
[ 0.000000] SRAT: PXM 2 -> ITS 6 -> Node 2
[ 0.000000] SRAT: PXM 3 -> ITS 7 -> Node 3
Fixes: dbd2b8267233 ("irqchip/gic-v3-its: Add ACPI NUMA node mapping")
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Switching FS and GS is a mess, and the current code is still subtly
wrong: it assumes that "Loading a nonzero value into FS sets the
index and base", which is false on AMD CPUs if the value being
loaded is 1, 2, or 3.
(The current code came from commit 3e2b68d752c9 ("x86/asm,
sched/x86: Rewrite the FS and GS context switch code"), which made
it better but didn't fully fix it.)
Rewrite it to be much simpler and more obviously correct. This
should fix it fully on AMD CPUs and shouldn't adversely affect
performance.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Those are funny cases. Make sure they work.
(Something is screwy with signal handling if a selector is 1, 2, or 3.
Anyone who wants to dive into that rabbit hole is welcome to do so.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In ELF_COPY_CORE_REGS, we're copying from the current task, so
accessing thread.fsbase and thread.gsbase makes no sense. Just read
the values from the CPU registers.
In practice, the old code would have been correct most of the time
simply because thread.fsbase and thread.gsbase usually matched the
CPU registers.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
execve used to leak FSBASE and GSBASE on AMD CPUs. Fix it.
The security impact of this bug is small but not quite zero -- it
could weaken ASLR when a privileged task execs a less privileged
program, but only if program changed bitness across the exec, or the
child binary was highly unusual or actively malicious. A child
program that was compromised after the exec would not have access to
the leaked base.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements from Arnaldo Carvalho de Melo:
User visible changes:
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events.
This was done by using scripts that extract the information from
the UAPI headers, generating string tables that are then used in
the 'perf trace' syscall argument ioctl beautifier.
More work needed to further use it, for instance, to use the
_IOC_DIR value where it is used sanely to suppress the third
argument, to set formatters for non-pointer values and ultimately
for using eBPF + pahole-like code to collect + beautify structs in
the third arg.
Using the current scheme of having tools/ copies of kernel headers
we'll make sure tooling stays working when changes are made to the
kernel ABI headers and will be notified when they get changed,
reducing the time for 'perf trace' to support new ABIs and allowing
the tools/perf/ codebase to have the definitions it needs to
build in dozens of distros/versions, as routinely tested using
containers for, at this time, 47 environments. (Arnaldo Carvalho de Melo)
Infrastructure changes:
- Clarify header version warning message (Ingo Molnar)
- Sync kernel ABI headers with tooling headers (Ingo Molnar, Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Its kzalloc() not kmalloc() which has failed earlier. While here
remove a redundant empty line.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170802084300.29487-1-khandual@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A hang on CPU0 onlining after a preceding offlining is observed. Trace
shows that CPU0 is stuck in check_tsc_sync_target() waiting for source
CPU to run check_tsc_sync_source() but this never happens. Source CPU,
in its turn, is stuck on synchronize_sched() which is called from
native_cpu_up() -> do_boot_cpu() -> unregister_nmi_handler().
So it's a classic ABBA deadlock, due to the use of synchronize_sched() in
unregister_nmi_handler().
Fix the bug by moving unregister_nmi_handler() from do_boot_cpu() to
native_cpu_up() after cpu onlining is done.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170803105818.9934-1-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since the kernel segment registers are not prepared at the
entry of irq-entry code, if a kprobe on such code is
jump-optimized, accessing per-CPU variables may cause a
kernel panic.
However, if the kprobe is not optimized, it triggers an int3
exception and sets segment registers correctly.
With this patch we check the probe-address and if it is in the
irq-entry code, it prohibits optimizing such kprobes.
This means we can continue probing such interrupt handlers by kprobes
but it is not optimized anymore.
Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Tested-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172795654.27216.9824039077047777477.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Generate irqentry and softirqentry text sections without
any Kconfig dependencies. This will add extra sections, but
there should be no performace impact.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172789110.27216.3955739126693102122.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Mark _stext and _end as character arrays instead of single
character variable, like include/asm-generic/sections.h does.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172782555.27216.2805751327900543374.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Mark _stext and _end as character arrays instead of single
character variables, like include/asm-generic/sections.h does.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172775958.27216.12951305461398200544.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Mark _stext and _etext as character arrays instead of
single character variables, like include/asm-generic/sections.h
does.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172769415.27216.12021110228384155707.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Propagate the return values of platform_get_irq and devm_request_irq on
failure.
Cc: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The loop to find the best memory frame in arch_timer_mem_acpi_init()
initializes the loop counter with itself ('i = i'), which is suspicious
in the first place and pointed out by clang. The loop condition is
'i < timer_count' and a prior for loop exits when 'i' reaches
'timer_count', therefore the second loop is never executed.
Initialize the loop counter with 0 to iterate over all timers, which
supposedly was the intention before the typo monster attacked.
Fixes: c2743a36765d3 ("clocksource: arm_arch_timer: add GTDT support for memory-mapped timer")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Subarchitecture support (mflags-y) was removed from x86 in this commit:
6bda2c8b32fe ("x86: remove subarchitecture support")
So drop the mflags-y usage from the Makefile.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1502105384-23214-1-git-send-email-caoj.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Apparently the binutils 2.20 assembler can't handle the '&&' operator in
the UNWIND_HINT_REGS macro. Rearrange the macro to do without it.
This fixes the following error:
arch/x86/entry/entry_64.S: Assembler messages:
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
arch/x86/entry/entry_64.S:521: Error: non-constant expression in ".if" statement
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 39358a033b2e ("objtool, x86: Add facility for asm code to provide unwind hints")
Link: http://lkml.kernel.org/r/e2ad97c1ae49a484644b4aaa4dd3faa4d6d969b2.1502116651.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In commit:
3fed382b46ba ("sched/numa: Implement NUMA node level wake_affine()")
Rik changed wake_affine to consider NUMA information when balancing
between LLC domains.
There are a number of problems here which this patch tries to address:
- LLC < NODE; in this case we'd use the wrong information to balance
- !NUMA_BALANCING: in this case, the new code doesn't do any
balancing at all
- re-computes the NUMA data for every wakeup, this can mean iterating
up to 64 CPUs for every wakeup.
- default affine wakeups inside a cache
We address these by saving the load/capacity values for each
sched_domain during regular load-balance and using these values in
wake_affine_llc(). The obvious down-side to using cached values is
that they can be too old and poorly reflect reality.
But this way we can use LLC wide information and thus not rely on
assuming LLC matches NODE. We also don't rely on NUMA_BALANCING nor do
we have to aggegate two nodes (or even cache domains) worth of CPUs
for each wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 3fed382b46ba ("sched/numa: Implement NUMA node level wake_affine()")
[ Minor readability improvements. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the original selftest, we didn't care what the engine->id was, just
that it could uniquely identify it. Later though, we started tracking
the mock engines in the fixed size arrays around the drm_i915_private and
so we now require their indices to be correct. This becomes an issue when
using the standalone harness which runs all available tests at module load,
and so we quickly assign an out-of-bounds index to an engine as we
reallocate the mock GEM device between tests. It doesn't show up in
igt/drv_selftest as that runs each subtest individually.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102045
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809163930.26470-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
|
|
The segment register high words on x86_32 may contain garbage.
Teach regs_get_register() to read them as u16 instead of unsigned
long.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0b76f6dbe477b7b1a81938fddcc3c483d48f0ff2.1502314765.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Xen's raw SYSCALL entries are much less weird than native. Rather
than fudging them to look like native entries, use the Xen-provided
stack frame directly.
This lets us eliminate entry_SYSCALL_64_after_swapgs and two uses of
the SWAPGS_UNSAFE_STACK paravirt hook. The SYSENTER code would
benefit from similar treatment.
This makes one change to the native code path: the compat
instruction that clears the high 32 bits of %rax is moved slightly
later. I'd be surprised if this affects performance at all.
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/7c88ed36805d36841ab03ec3b48b4122c4418d71.1502164668.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
