| Age | Commit message (Collapse) | Author |
|---|
|
The Qualcomm dwc3 glue driver is currently accessing the driver data of
the child core device during suspend and on wakeup interrupts. This is
clearly a bad idea as the child may not have probed yet or could have
been unbound from its driver.
The first such layering violation was part of the initial version of the
driver, but this was later made worse when the hack that accesses the
driver data of the grand child xhci device to configure the wakeup
interrupts was added.
Fixing this properly is not that easily done, so add a sanity check to
make sure that the child driver data is non-NULL before dereferencing it
for now.
Note that this relies on subtleties like the fact that driver core is
making sure that the parent is not suspended while the child is probing.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/all/20230325165217.31069-4-manivannan.sadhasivam@linaro.org/
Fixes: d9152161b4bf ("usb: dwc3: Add Qualcomm DWC3 glue layer driver")
Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
Cc: stable@vger.kernel.org # 3.18: a872ab303d5d: "usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup"
Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Message-ID: <20230607100540.31045-2-johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Consider a scenario where cable disconnect happens when there is an active
usb reqest queued to the UDC. As part of the disconnect we would issue an
end transfer with no interrupt-on-completion before giving back this
request. Since we are giving back the request without skipping TRBs the
num_trbs field of dwc3_request still holds the stale value previously used.
Function drivers re-use same request for a given bind-unbind session and
hence their dwc3_request context gets preserved across cable
disconnect/connect. When such a request gets re-queued after cable connect,
we would increase the num_trbs field on top of the previous stale value
thus incorrectly representing the number of TRBs used. Fix this by
resetting num_trbs field before giving back the request.
Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently {modprobe, bind} after {rmmod, unbind} results in probe failure.
genirq: Flags mismatch irq 22. 00000004 (85070400.usb3drd) vs. 00000004 (85070400.usb3drd)
renesas_usb3: probe of 85070000.usb3peri failed with error -16
The reason is, it is trying to register an interrupt handler for the same
IRQ twice. The devm_request_irq() was called with the parent device.
So the interrupt handler won't be unregistered when the usb3-peri device
is unbound.
Fix this issue by replacing "parent dev"->"dev" as the irq resource
is managed by this driver.
Fixes: 9cad72dfc556 ("usb: gadget: Add support for RZ/V2M USB3DRD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-ID: <20230530161720.179927-1-biju.das.jz@bp.renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MAC version 21H supports the 10Mbps speed. So, extend support to
platforms that support it.
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod.
Fix it by calling ath11k_fw_stats_free() function before hardware
unregister.
While at it, avoid calling ath11k_fw_stats_free() while processing
the firmware stats received in the WMI event because the local list
is getting spliced and reinitialised and hence there are no elements
in the list after splicing.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230606091128.14202-1-quic_adisi@quicinc.com
|
|
Add a new debug level for CE so that we don't need to use AHB level in ce.c.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-16-kvalo@kernel.org
|
|
Cleanup HTC debug messages to follow the preferred style and try to make them
more readable. Also add a few more and remove unnecessary.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-15-kvalo@kernel.org
|
|
According to Documentation/core-api/printk-formats.rst %pK should not be used
with printk(), so switch back to using just %p. printk() will hash the address
so addresses are not leaked to user space.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-14-kvalo@kernel.org
|
|
Fix the debug message to follow the preferred style.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-13-kvalo@kernel.org
|
|
Somehow the character 'k' in ATH11k_DBG_HAL was in lower case. Change it to
upper case.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-12-kvalo@kernel.org
|
|
Merge the two debug messages into and fix them to follow the preferred style.
Also change the log level to ATH11K_DBG_DP_TX to match the filename.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-11-kvalo@kernel.org
|
|
For better readability fix PCI debug messages to follow the preferred style.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-10-kvalo@kernel.org
|
|
Add debug messages for every command and cleanup the existing ones to make them
all follow the same style. For better readability start every message with
"cmd". Print the debug message after a successful ath11k_wmi_cmd_send() call.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-9-kvalo@kernel.org
|
|
Also these functions don't follow the preferred style so fix those.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-8-kvalo@kernel.org
|
|
The error handling doesn't follow the preferred style so fix that.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-7-kvalo@kernel.org
|
|
Now that we have a default handler there's no need anymore to list every
unsupported event id anymore, so remove that to clean this up.
While at it remove the pointless todo comment and change the debug message to
follow the preferred style.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-6-kvalo@kernel.org
|
|
Add a debug message for every WMI event to make it easier track what's
happening in WMI. For better readability start every debug message with
"event".
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-5-kvalo@kernel.org
|
|
Now that the previous patch changed ath11k_dbg() to print the debug level
there's no need to have the level in the actual message anymore. So remove those.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-4-kvalo@kernel.org
|
|
To make it easier understand the context of a debug message print the debug
level before the actual message. An example:
[21867.231900] ath11k_pci 0000:06:00.0: wmi processed regulatory ext channel list
The tracepoint call is not modified, it's better to userspace print the debug
level if needed.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-3-kvalo@kernel.org
|
|
It's not used anywhere so can be easily removed.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609142440.24643-2-kvalo@kernel.org
|
|
On EDMA capable hardware, ath9k_txq_list_has_key() can enter infinite
loop if it is called while all txq_fifos have packets that use different
key that the one we are looking for. Fix it by exiting the loop if all
txq_fifos have been checked already.
Because this loop is called under spin_lock_bh() (see ath_txq_lock) it
causes the following rcu stall:
rcu: INFO: rcu_sched self-detected stall on CPU
ath10k_pci 0000:01:00.0: failed to read temperature -11
rcu: 1-....: (5254 ticks this GP) idle=189/1/0x4000000000000002 softirq=8442983/8442984 fqs=2579
(t=5257 jiffies g=17983297 q=334)
Task dump for CPU 1:
task:hostapd state:R running task stack: 0 pid: 297 ppid: 289 flags:0x0000000a
Call trace:
dump_backtrace+0x0/0x170
show_stack+0x1c/0x24
sched_show_task+0x140/0x170
dump_cpu_task+0x48/0x54
rcu_dump_cpu_stacks+0xf0/0x134
rcu_sched_clock_irq+0x8d8/0x9fc
update_process_times+0xa0/0xec
tick_sched_timer+0x5c/0xd0
__hrtimer_run_queues+0x154/0x320
hrtimer_interrupt+0x120/0x2f0
arch_timer_handler_virt+0x38/0x44
handle_percpu_devid_irq+0x9c/0x1e0
handle_domain_irq+0x64/0x90
gic_handle_irq+0x78/0xb0
call_on_irq_stack+0x28/0x38
do_interrupt_handler+0x54/0x5c
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
ath9k_txq_has_key+0x1bc/0x250 [ath9k]
ath9k_set_key+0x1cc/0x3dc [ath9k]
drv_set_key+0x78/0x170
ieee80211_key_replace+0x564/0x6cc
ieee80211_key_link+0x174/0x220
ieee80211_add_key+0x11c/0x300
nl80211_new_key+0x12c/0x330
genl_family_rcv_msg_doit+0xbc/0x11c
genl_rcv_msg+0xd8/0x1c4
netlink_rcv_skb+0x40/0x100
genl_rcv+0x3c/0x50
netlink_unicast+0x1ec/0x2c0
netlink_sendmsg+0x198/0x3c0
____sys_sendmsg+0x210/0x250
___sys_sendmsg+0x78/0xc4
__sys_sendmsg+0x4c/0x90
__arm64_sys_sendmsg+0x28/0x30
invoke_syscall.constprop.0+0x60/0x100
do_el0_svc+0x48/0xd0
el0_svc+0x14/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x158/0x15c
This rcu stall is hard to reproduce as is, but changing ATH_TXFIFO_DEPTH
from 8 to 2 makes it reasonably easy to reproduce.
Fixes: ca2848022c12 ("ath9k: Postpone key cache entry deletion for TXQ frames reference it")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230609093744.1985-1-repk@triplefau.lt
|
|
Naveen Mamindlapalli says:
====================
RVU NIX AF driver updates
This patch series includes a few enhancements and other updates to the
RVU NIX AF driver.
The first patch adds devlink option to configure NPC MCAM high priority
zone entries reservation. This is useful when the requester needs more
high priority entries than default reserved entries.
The second patch adds support for RSS hash computation using L3 SRC or
DST only, or L4 SRC or DST only.
The third patch updates DWRR MTU configuration for CN10KB silicon. HW uses
the DWRR MTU to compute DWRR weight.
Patch 4 configures the LBK link in TL3_TL2 configuration only when switch
mode is enabled.
Patch 5 adds an option in the mailbox request to enable/disable DROP_RE bit
which drops packets with L2 errors when set.
Patch 6 updates SMQ flush mechanism to stop other child nodes from
enqueuing any packets while SMQ flush is active. Otherwise SMQ flush may
timeout.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When multiple transmit scheduler queues feed a TL1 transmit link, the
SMQ flush initiated on a low priority queue might get stuck when a high
priority queue fully subscribes the transmit link. This inturn effects
interface teardown. To avoid this, temporarily XOFF all TL1's other
immediate child transmit scheduler queues and also clear any rate limit
configuration on all the scheduler queues in SMQ(flush) hierarchy.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add option to toggle DROP_RE bit in rx cfg mbox. This helps in
modifying the config runtime as opposed to setting available via
nix_lf_alloc() mbox at NIX LF init time.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, all the TL3_TL2 nodes are being configured to enable
switch LBK channel 63 in them. Instead enable them only when switch
mode is enabled.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DWRR MTU config added for SDP and RPM/LBK links on CN10K
silicon is further extended on CK10KB silicon variant and made
it configurable. Now there are 4 DWRR MTU config to choose while
setting transmit scheduler's RR_WEIGHT.
Here we are reserving one config for each of RPM, SDP and LBK.
NIXX_AF_DWRR_MTUX(0) ---> RPM
NIXX_AF_DWRR_MTUX(1) ---> SDP
NIXX_AF_DWRR_MTUX(2) ---> LBK
PF/VF drivers can choose the DWRR_MTU to be used by setting
SMQX_CFG[pkt_link_type] to one of above. TLx_SCHEDULE[RR_WEIGHT]
is to be as configured 'quantum / 2^DWRR_MTUX[MTU]'. DWRR_MTU
of each link is exposed to PF/VF drivers via mailbox for
RR_WEIGHT calculation.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to select L3 SRC or DST only, L4 SRC or DST only for RSS
calculation.
AF consumer may have requirement as we can select only SRC or DST data for
RSS calculation in L3, L4 layers. With this requirement there will be
following combinations, IPV[4,6]_SRC_ONLY, IPV[4,6]_DST_ONLY,
[TCP,UDP,SCTP]_SRC_ONLY, [TCP,UDP,SCTP]_DST_ONLY. So, instead of creating
a bit for each combination, we are using upper 4 bits (31:28) in the
flow_key_cfg to represent the SRC, DST selection. 31 => L3_SRC,
30 => L3_DST, 29 => L4_SRC, 28 => L4_DST. These won't be part of flow_cfg,
so that we don't need to change the existing ABI.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The NPC MCAM entries are currently divided into three priority zones
in AF driver: high, mid, and low. The high priority zone and low priority
zone take up 1/8th (each) of the available MCAM entries, and remaining
going to the mid priority zone.
The current allocation scheme may not meet certain requirements, such
as when a requester needs more high priority zone entries than are
reserved. This patch adds a devlink configurable option to increase the
number of high priority zone entries that can be allocated by requester.
The max number of entries that can be reserved for high priority usage
is 100% of available MCAM entries.
Usage:
1) Change high priority zone percentage to 75%:
devlink -p dev param set pci/0002:01:00.0 name npc_mcam_high_zone_percent \
value 75 cmode runtime
2) Read high priority zone percentage:
devlink -p dev param show pci/0002:01:00.0 name npc_mcam_high_zone_percent
The devlink set configuration is only permitted when no MCAM entries
are assigned, i.e., all MCAM entries are free, indicating that no PF/VF
driver is loaded. So user must unload/unbind PF/VF driver/devices before
modifying the high priority zone percentage.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test currently specifies "l2_miss" as "true" / "false", but the
version that eventually landed in iproute2 uses "1" / "0" [1]. Align the
test accordingly.
[1] https://lore.kernel.org/netdev/20230607153550.3829340-1-idosch@nvidia.com/
Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This flaw is detected by smatch:
drivers/net/wireless/realtek/rtw88/mac.c:748 __rtw_download_firmware()
warn: missing unwind goto?
Though most things of dlfw_fail have been done by
download_firmware_end_flow() and wlan_cpu_enable(), an exception is that
download_firmware_end_flow() clear BIT_MCUFWDL_EN bit conditionally.
So, make this change to clear the bit.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202306052310.OVhcUjZ3-lkp@intel.com/
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230607012741.10353-1-pkshih@realtek.com
|
|
David Howells says:
====================
splice, net: Some miscellaneous MSG_SPLICE_PAGES changes
Now that the splice_to_socket() has been rewritten so that nothing now uses
the ->sendpage() file op[1], some further changes can be made, so here are
some miscellaneous changes that can now be done.
(1) Remove the ->sendpage() file op.
(2) Remove hash_sendpage*() from AF_ALG.
(3) Make sunrpc send multiple pages in single sendmsg() call rather than
calling sendpage() in TCP (or maybe TLS).
(4) Make tcp_bpf_sendpage() a wrapper around tcp_bpf_sendmsg().
(5) Make AF_KCM use sendmsg() when calling down to TCP and then make it
send entire fragment lists in single sendmsg calls.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=fd5f4d7da29218485153fd8b4c08da7fc130c79f [1]
====================
Link: https://lore.kernel.org/r/20230609100221.2620633-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rewrite the AF_KCM transmission loop to send all the fragments in a single
skb or frag_list-skb in one sendmsg() with MSG_SPLICE_PAGES set. The list
of fragments in each skb is conveniently a bio_vec[] that can just be
attached to a BVEC iter.
Note: I'm working out the size of each fragment-skb by adding up bv_len for
all the bio_vecs in skb->frags[] - but surely this information is recorded
somewhere? For the skbs in head->frag_list, this is equal to
skb->data_len, but not for the head. head->data_len includes all the tail
frags too.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Herbert <tom@herbertland.com>
cc: Tom Herbert <tom@quantonium.net>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When transmitting data, call down into the transport socket using sendmsg
with MSG_SPLICE_PAGES to indicate that content should be spliced rather
than using sendpage.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Tom Herbert <tom@herbertland.com>
cc: Tom Herbert <tom@quantonium.net>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make tcp_bpf_sendpage() a wrapper around tcp_bpf_sendmsg(MSG_SPLICE_PAGES)
rather than a loop calling tcp_sendpage(). sendpage() will be removed in
the future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When transmitting data, call down into TCP using sendmsg with
MSG_SPLICE_PAGES to indicate that content should be spliced rather than
performing sendpage calls to transmit header, data pages and trailer.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove hash_sendpage*() as nothing should now call it since the rewrite of
splice_to_socket()[1].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=2dc334f1a63a8839b88483a3e73c0f27c9c1791c [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove file->f_op->sendpage as splicing to a socket now calls sendmsg
rather than sendpage.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As clk_core_populate_parent_map() checks clk_init_data.num_parents
first, and checks clk_init_data.parent_names[] before
clk_init_data.parent_data[] and clk_init_data.parent_hws[].
Therefore the clk_init_data structure needs to be explicitly initialised
to prevent an unexpected crash if clk_init_data.parent_names[] is a
random value.
CPU 0 Unable to handle kernel paging request at virtual address 0000000000000dc0, era == 9000000002986290, ra == 900000000298624c
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2+ #4582
pc 9000000002986290 ra 900000000298624c tp 9000000100094000 sp 9000000100097a60
a0 9000000104541e00 a1 0000000000000000 a2 0000000000000dc0 a3 0000000000000001
a4 90000001000979f0 a5 90000001800977d7 a6 0000000000000000 a7 900000000362a000
t0 90000000034f3548 t1 6f8c2a9cb5ab5f64 t2 0000000000011340 t3 90000000031cf5b0
t4 0000000000000dc0 t5 0000000000000004 t6 0000000000011300 t7 9000000104541e40
t8 000000000005a4f8 u0 9000000104541e00 s9 9000000104541e00 s0 9000000104bc4700
s1 9000000104541da8 s2 0000000000000001 s3 900000000356f9d8 s4 ffffffffffffffff
s5 0000000000000000 s6 0000000000000dc0 s7 90000000030d0a88 s8 0000000000000000
ra: 900000000298624c __clk_register+0x228/0x84c
ERA: 9000000002986290 __clk_register+0x26c/0x84c
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
BADV: 0000000000000dc0
PRID: 0014a000 (Loongson-64bit, )
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 90000000031c1810 90000000030d0a88 900000000325bac0 90000000034f3548
90000001002ab410 9000000104541e00 0000000000000dc0 9000000003150098
90000000031c1810 90000000031a0460 900000000362a000 90000001002ab410
900000000362a000 9000000104541da8 9000000104541de8 90000001002ab410
900000000362a000 9000000002986a68 90000000034f3ed8 90000000030d0aa8
9000000104541da8 900000000298d3b8 90000000031c1810 0000000000000000
90000000034f3ed8 90000000030d0aa8 0000000000000dc0 90000000030d0a88
90000001002ab410 900000000298d401 0000000000000000 6f8c2a9cb5ab5f64
90000000034f4000 90000000030d0a88 9000000003a48a58 90000001002ab410
9000000104bd81a8 900000000298d484 9000000100020260 0000000000000000
...
Call Trace:
[<9000000002986290>] __clk_register+0x26c/0x84c
[<9000000002986a68>] devm_clk_hw_register+0x5c/0xe0
[<900000000298d3b8>] loongson2_clk_register.constprop.0+0xdc/0x10c
[<900000000298d484>] loongson2_clk_probe+0x9c/0x4ac
[<9000000002a4eba4>] platform_probe+0x68/0xc8
[<9000000002a4bf80>] really_probe+0xbc/0x2f0
[<9000000002a4c23c>] __driver_probe_device+0x88/0x128
[<9000000002a4c318>] driver_probe_device+0x3c/0x11c
[<9000000002a4c5dc>] __driver_attach+0x98/0x18c
[<9000000002a49ca0>] bus_for_each_dev+0x80/0xe0
[<9000000002a4b0dc>] bus_add_driver+0xfc/0x1ec
[<9000000002a4d4a8>] driver_register+0x68/0x134
[<90000000020f0110>] do_one_initcall+0x50/0x188
[<9000000003150f00>] kernel_init_freeable+0x224/0x294
[<90000000030240fc>] kernel_init+0x20/0x110
[<90000000020f1568>] ret_from_kernel_thread+0xc/0xa4
Fixes: acc0ccffec50 ("clk: clk-loongson2: add clock controller driver support")
Cc: stable@vger.kernel.org
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20230524014924.2869051-1-zhoubinbin@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The given operations are inverted for the wrong registers which makes
multiple of the mt8365 hardware units unusable. In my setup at least usb
did not work.
Fixed by swapping the operations with the inverted ones.
Reported-by: Alexandre Mergnat <amergnat@baylibre.com>
Fixes: 905b7430d3cc ("clk: mediatek: mt8365: Convert simple_gate to mtk_gate clocks")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20230511133226.913600-1-msp@baylibre.com
Tested-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
ULONG_MAX is used by a few drivers to figure out the highest available
clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a
signed value as input, the current logic effectively calculates with
ULONG_MAX = -1, which results in the worst parent clock being chosen
instead of the best one.
For example on Rockchip RK3588 the eMMC driver tries to figure out
the highest available clock rate. There are three parent clocks
available resulting in the following rate diffs with the existing
logic:
GPLL: abs(18446744073709551615 - 1188000000) = 1188000001
CPLL: abs(18446744073709551615 - 1500000000) = 1500000001
XIN24M: abs(18446744073709551615 - 24000000) = 24000001
As a result the clock framework will promote a maximum supported
clock rate of 24 MHz, even though 1.5GHz are possible. With the
updated logic any casting between signed and unsigned is avoided
and the numbers look like this instead:
GPLL: 18446744073709551615 - 1188000000 = 18446744072521551615
CPLL: 18446744073709551615 - 1500000000 = 18446744072209551615
XIN24M: 18446744073709551615 - 24000000 = 18446744073685551615
As a result the parent with the highest acceptable rate is chosen
instead of the parent clock with the lowest one.
Cc: stable@vger.kernel.org
Fixes: 49502408007b ("mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip")
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230526171057.66876-2-sebastian.reichel@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Zahari Doychev says:
====================
net: flower: add cfm support
The first patch adds cfm support to the flow dissector.
The second adds the flower classifier support.
The third adds a selftest for the flower cfm functionality.
====================
Link: https://lore.kernel.org/r/20230608105648.266575-1-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New cfm flower test case is added to the net forwarding selfttests.
Example output:
# ./tc_flower_cfm.sh p1 p2
TEST: CFM opcode match test [ OK ]
TEST: CFM level match test [ OK ]
TEST: CFM opcode and level match test [ OK ]
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to the tc flower classifier to match based on fields in CFM
information elements like level and opcode.
tc filter add dev ens6 ingress protocol 802.1q \
flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \
action drop
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for dissecting cfm packets. The cfm packet header
fields maintenance domain level and opcode can be dissected.
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: skip tests not supported by old kernels (part 3)
After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.
Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.
In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.
To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftest or just some sub-tests before starting them. This cannot be
applied in all cases.
Similar to the second part, this third one focuses on marking different
sub-tests as skipped if some MPTCP features are not supported. This
time, only in "mptcp_join.sh" selftest, the remaining one, is modified.
Several techniques are used here to achieve this task:
- Before starting some tests:
- Check if a file (sysctl knob) is present: that's what patch 12/17 is
doing for the userspace PM feature.
- Check if a required kernel symbol is present in /proc/kallsyms:
patches 9, 10, 14 and 15/17 are using this technique.
- Check if it is possible to setup a particular network environment
requiring Netfilter or TC: if the preparation step fail, the linked
sub-test is marked as skipped. Patch 5/17 is doing that.
- Check if a MIB counter is available: patches 7 and 13/17 do that.
- Check if the kernel version is newer than a specific one: patch 1/17
adds some helpers in mptcp_lib.sh to ease its use. That's not ideal
and it is only used as last resort but as mentioned above, it is
important to skip tests if they are not supported not to have the
whole selftest always being marked as failed on old kernels. Patches
11 and 17/17 are checking the kernel version. An alternative would
be to ignore the results for some sub-tests but that's not ideal
too. Note that SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK env var can be
set to 1 not to skip these tests if the running kernel doesn't have
a supported version.
- After having launched the tests:
- Adapt the expectations depending on the presence of a kernel symbol
(patch 6/17) or a kernel version (patch 8/17).
- Check is a MIB counter is available and skip the verification if
not. Patch 4/17 is using this technique.
Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.
Patch 2/17 uses 'iptables-legacy' if available because it might be
needed when using an older kernel not supporting iptables-nft.
Patch 3/17 adds some helpers used in the other patches mentioned to
easily mark sub-tests as skipped.
Patch 16/17 uniforms MPTCP Join "listener" tests: it was imported code
from userspace_pm.sh but without using the "code style" and ways of
using tools and printing messages from MPTCP Join selftest.
Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================
Link: https://lore.kernel.org/r/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The alignment was different from the other tests because tabs were used
instead of spaces.
While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.
It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable@vger.kernel.org
Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
