summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-12Bluetooth: Read encryption key size for BR/EDR connectionsJohan Hedberg
Since Bluetooth 3.0 there's a HCI command available for reading the encryption key size of an BR/EDR connection. This information is essential e.g. for generating an LTK using SMP over BR/EDR, so store it as part of struct hci_conn. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Move SC-only check outside of BT_CONFIG branchJohan Hedberg
Checking for SC-only mode requirements when we get an encrypt change event shouldn't be limited to the BT_CONFIG state but done any time encryption changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for min LE encryption key sizeJohan Hedberg
This patch adds a debugfs control to set a different minimum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly (e.g. that we get appropriate 'Encryption Key Size' error responses when necessary). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for max LE encryption key sizeJohan Hedberg
This patch adds a debugfs control to set a different maximum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12fbdev: omap2: remove potential format string leakKees Cook
Since kobject_init_and_add takes a format string, make sure that the passed in name cannot be accidentally parsed. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-06-12HID: sony: PS Move fix report descriptorSimon Wood
Fix the report descriptor so that the buttons and trigger are correctly reported. The format of the input report is described here: https://github.com/nitsch/moveonpc/wiki/Input-report The Accelerometers and Gyros (1st frame only) are also reported as axis, but the Magnetometers are NOT as 'fixing' their byte order would break user-space drivers such as PSMoveAPI. It is hoped to resolve this at a future time. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: PS3 Move enable LEDs and Rumble via BTSimon Wood
The LED and Rumble control only function via BT if the full output report is sent. The large report still functions via USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Add support PS3 Move Battery via BTSimon Wood
Add support for the battery charge level and state to be read via BT. This is not support via USB as there is no know way to get the device sending 'input' reports over USB. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Add quirk for MOTION_CONTROLLER_BTSimon Wood
Split quirk for PS Move Controller as it has to be treated differently when connected via BT. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12HID: sony: Support PS3 Move Controller when connected via BluetoothSimon Wood
Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-06-12pwm: Add pwmchip_add_with_polarity() APITim Kryger
Add a new function to register a PWM chip with channels that have their initial polarity as specified by an additional parameter. This benefits drivers of controllers that by default operate with inversed polarity by removing the need to modify the polarity during initialization. Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> [thierry.reding@gmail.com: export pwmchip_add_with_polarity()] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12iommu, x86: Properly handle posted interrupts for IOMMU hotplugFeng Wu
Return error when inserting a new IOMMU which doesn't support posted interrupts if posted interrupts are already enabled. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-11-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Provide irq_remapping_cap() interfaceFeng Wu
Add a new interface irq_remapping_cap() to detect whether irq remapping supports new features, such as VT-d Posted-Interrupts. Export the function, so that KVM code can check this and use this mechanism properly. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-10-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Setup Posted-Interrupts capability for Intel iommuFeng Wu
Set Posted-Interrupts capability for Intel iommu when Interrupt Remapping is enabled, clear it when disabled. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-9-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Add cap_pi_support() to detect VT-d PI capabilityFeng Wu
Add helper function to detect VT-d Posted-Interrupts capability. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-8-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Avoid migrating VT-d posted interruptsFeng Wu
When the interrupt is configured in posted mode, the destination of the interrupt is set in the Posted-Interrupts Descriptor and the migration of these interrupts happens during vCPU scheduling. We still update the cached irte, which will be used when changing back to remapping mode, but we avoid writing the table entry as this would overwrite the posted mode entry. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-7-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Save the mode (posted or remapped) of an IRTEFeng Wu
Add a new field to struct irq_2_iommu, which captures whether the associated IRTE is in posted mode or remapped mode. We update this field when the IRTE is written into the table. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-6-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chipFeng Wu
Interrupt chip callback to set the VCPU affinity for posted interrupts. [ tglx: Use the helper function to copy from the remap irte instead of open coding it. Massage the comment as well ] Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Cc: iommu@lists.linux-foundation.org Cc: joro@8bytes.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-5-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu: dmar: Provide helper to copy shared irte fieldsThomas Gleixner
Instead of open coding, provide a helper function to copy the shared irte fields. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: joro@8bytes.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-4-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu: dmar: Extend struct irte for VT-d Posted-InterruptsThomas Gleixner
The IRTE (Interrupt Remapping Table Entry) is either an entry for remapped or for posted interrupts. The hardware distiguishes between remapped and posted entries by bit 15 in the low 64 bit of the IRTE. If cleared the entry is remapped, if set it's posted. The entries have common fields and dependent on the posted bit fields with different meanings. Extend struct irte to handle the differences between remap and posted mode by having three structs in the unions: - Shared - Remapped - Posted Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Wu <feng.wu@intel.com> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-3-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12iommu: Add new member capability to struct irq_remap_opsFeng Wu
Add a new member 'capability' to struct irq_remap_ops for storing information about available capabilities such as VT-d Posted-Interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-2-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12pwm: atmel: Fix incorrect CDTY value after disablingAlexandre Belloni
pwm-leds calls .config() and .disable() in a row. This exhibits that it may happen that the channel gets disabled before CDTY has been updated with CUPD. The issue gets quite worse with long periods. So, ensure that at least one period has past before disabling the channel by polling ISR. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Gaël PORTAY <gael.portay@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12selftests: timers: Add leap-second timer edge testing to leap-a-day.cJohn Stultz
Prarit reported an issue w/ timers around the leapsecond, where a timer set for Midnight UTC (00:00:00) might fire a second early right before the leapsecond (23:59:60 - though it appears as a repeated 23:59:59) is applied. So I've updated the leap-a-day.c test to integrate a similar test, where we set a timer and check if it triggers at the right time, and if the ntp state transition is managed properly. Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reported-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-6-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12ntp: Do leapsecond adjustment in adjtimex read pathJohn Stultz
Since the leapsecond is applied at tick-time, this means there is a small window of time at the start of a leap-second where we cross into the next second before applying the leap. This patch modified adjtimex so that the leap-second is applied on the second edge. Providing more correct leapsecond behavior. This does make it so that adjtimex()'s returned time values can be inconsistent with time values read from gettimeofday() or clock_gettime(CLOCK_REALTIME,...) for a brief period of one tick at the leapsecond. However, those other interfaces do not provide the TIME_OOP time_state return that adjtimex() provides, which allows the leapsecond to be properly represented. They instead only see a time discontinuity, and cannot tell the first 23:59:59 from the repeated 23:59:59 leap second. This seems like a reasonable tradeoff given clock_gettime() / gettimeofday() cannot properly represent a leapsecond, and users likely care more about performance, while folks who are using adjtimex() more likely care about leap-second correctness. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-5-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edgeJohn Stultz
Currently, leapsecond adjustments are done at tick time. As a result, the leapsecond was applied at the first timer tick *after* the leapsecond (~1-10ms late depending on HZ), rather then exactly on the second edge. This was in part historical from back when we were always tick based, but correcting this since has been avoided since it adds extra conditional checks in the gettime fastpath, which has performance overhead. However, it was recently pointed out that ABS_TIME CLOCK_REALTIME timers set for right after the leapsecond could fire a second early, since some timers may be expired before we trigger the timekeeping timer, which then applies the leapsecond. This isn't quite as bad as it sounds, since behaviorally it is similar to what is possible w/ ntpd made leapsecond adjustments done w/o using the kernel discipline. Where due to latencies, timers may fire just prior to the settimeofday call. (Also, one should note that all applications using CLOCK_REALTIME timers should always be careful, since they are prone to quirks from settimeofday() disturbances.) However, the purpose of having the kernel do the leap adjustment is to avoid such latencies, so I think this is worth fixing. So in order to properly keep those timers from firing a second early, this patch modifies the ntp and timekeeping logic so that we keep enough state so that the update_base_offsets_now accessor, which provides the hrtimer core the current time, can check and apply the leapsecond adjustment on the second edge. This prevents the hrtimer core from expiring timers too early. This patch does not modify any other time read path, so no additional overhead is incurred. However, this also means that the leap-second continues to be applied at tick time for all other read-paths. Apologies to Richard Cochran, who pushed for similar changes years ago, which I resisted due to the concerns about the performance overhead. While I suspect this isn't extremely critical, folks who care about strict leap-second correctness will likely want to watch this. Potentially a -stable candidate eventually. Originally-suggested-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reported-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12ntp: Introduce and use SECS_PER_DAY macro instead of 86400John Stultz
Currently the leapsecond logic uses what looks like magic values. Improve this by defining SECS_PER_DAY and using that macro to make the logic more clear. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12pwm: atmel: Fix incorrect CDTY value after enablingAlexandre Belloni
CUPD is not flushed before enabling the channel so it will update CDTY/CPRD just after one period. So we always set CUPD, even when the channel is not enabled. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12time: Move clock_was_set_seq update before updating shadow-timekeeperJohn Stultz
It was reported that 868a3e915f7f5eba (hrtimer: Make offset update smarter) was causing timer problems after suspend/resume. The problem with that change is the modification to clock_was_set_seq in timekeeping_update is done prior to mirroring the time state to the shadow-timekeeper. Thus the next time we do update_wall_time() the updated sequence is overwritten by whats in the shadow copy. This patch moves the shadow-timekeeper mirroring to the end of the function, after all updates have been made, so all data is kept in sync. (This patch also affects the update_fast_timekeeper calls which were also problematically done prior to the mirroring). Reported-and-tested-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1434063297-28657-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12x86/fpu: Fix double-increment in setup_xstate_features()Dave Hansen
I noticed that my MPX tracepoints were producing garbage for the lower and upper bounds: mpx_bounds_register_exception: address referenced: 0x00007fffffffccb7 bounds: lower: 0x0 ~upper: 0xffffffffffffffff mpx_bounds_register_exception: address referenced: 0x00007fffffffccbf bounds: lower: 0x0 ~upper: 0xffffffffffffffff This is, of course, bogus because 0x00007fffffffccbf is *within* the bounds. I assumed that my instruction decoder was bad and went looking at it. But I eventually realized that I was getting a '0' offset back from xstate_offsets[BNDREGS]. It was being skipped in the initialization, which is obviously bogus, so remove the extra leaf++. This also goes an initializes xstate_offsets/sizes[] to -1 so so that bugs like this will oops instead of silently failing in interesting ways. This was introduced by: 39f1acd ("x86/fpu/xstate: Don't assume the first zero xfeatures zero bit means the end") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@sr71.net Link: http://lkml.kernel.org/r/20150611193400.2E0B00DB@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-12Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes: User visible changes: - Beautify the perf_event_open() syscall in 'perf trace'. (Arnaldo Carvalho de Melo) - Error out unsupported group leader immediately in 'perf stat'. (Kan Liang) - Amend some 'perf record' option summaries (period, etc). (Peter Zijlstra) - Avoid possible race condition in copyfile() in 'perf buildid-cache'. (Milos Vyletel) Infrastructure changes: - Display 0x for hex values when printing the attribute. (Adrian Hunter) - Update MANIFEST per files removed from kernel. (David Ahern) Build fixes: - Fix PRIu64 printf related failure on 32-bit arch. (He Kuang) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-12mmc: dw_mmc: insmod followed by rmmod will hung for eMMCPrabu Thangamuthu
Remove module of dw_mmc driver will hung for eMMC devices if we follow the steps which are listed below, insmod dw_mmc.ko insmod dw_mmc-pci.ko rmmod dw_mmc-pci.ko The root cause for this issue is, dw_mci_remove() will disable all the interrupts by programming 0x0 to INTMASK register then it will call dw_mci_cleanup_slot(). But dw_mci_cleanup_slot() is issuing CMD6 to disable the eMMC boot partition and it is waiting for Command Complete interrupt. Since INTMASK was already cleared by dw_mci_remove(), Command Complete interrupt is not reaching the system. This leads to process hung. Signed-off-by: Prabu Thangamuthu <prabu.t@synopsys.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-12ALSA: hda - Abort the probe without i915 binding for HSW/BDWTakashi Iwai
The previous patch tried to continue the probe if i915 binding fails. For for simplicity reason, we haven't implemented abort even for controller chips that are dedicated for HDMI/DP on HSW and BDW. However, Mengdong suggested that this can be dangerous; BIOS may disable gfx power well although the PCI entry for HD-audio is left, and this may result in the unexpected behavior, kernel errors, etc. For avoiding this situation, abort the probe at i915 binding failure only for HSW/BDW chips selectively. For other chips, it still continues. Fixes: bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails') Reported-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-11perf tools: Update MANIFEST per files removed from kernelDavid Ahern
Building perf out of kernel tree is currently broken because the MANIFEST file refers to kernel files that have been removed. With this patch make perf-targz-src-pkg succeeds as does building perf using the generated tarfile. Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1433526173-172332-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11trace: Beautify perf_event_open syscallArnaldo Carvalho de Melo
Syswide tracing and then running 'stat' and 'trace': $ perf trace -e perf_event_open 1034.649 (0.019 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = -1 EINVAL Invalid argument 1034.670 (0.008 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument 1034.681 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument 1034.692 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument 9986.983 (0.014 ms): trace/6139 perf_event_open(attr_uptr: 0x7ffd9c629320, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9987.026 (0.016 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9987.041 (0.008 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9987.489 (0.092 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 3 9987.536 (0.044 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4 9987.580 (0.041 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5 9987.620 (0.037 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 7 9987.659 (0.035 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 8 9987.692 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 9 9987.727 (0.032 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 10 9987.761 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 11 Need to intercept perf_copy_attr() with a kprobe or with eBPF... Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-njb105hab2i3t5dexym9lskl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "i915 and radeon fixes: i915: fix for connector oops regression DDC probing fix radeon: two radeon reverts, along with a freeze workaround and a fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO Revert "drm/radeon: adjust pll when audio is not enabled" Revert "drm/radeon: don't share plls if monitors differ in audio support" drm/radeon: fix freeze for laptop with Turks/Thames GPU. drm/i915: Fix DDC probe for passive adapters drm/i915: Properly initialize SDVO analog connectors
2015-06-11net: don't wait for order-3 page allocationShaohua Li
We saw excessive direct memory compaction triggered by skb_page_frag_refill. This causes performance issues and add latency. Commit 5640f7685831e0 introduces the order-3 allocation. According to the changelog, the order-3 allocation isn't a must-have but to improve performance. But direct memory compaction has high overhead. The benefit of order-3 allocation can't compensate the overhead of direct memory compaction. This patch makes the order-3 page allocation atomic. If there is no memory pressure and memory isn't fragmented, the alloction will still success, so we don't sacrifice the order-3 benefit here. If the atomic allocation fails, direct memory compaction will not be triggered, skb_page_frag_refill will fallback to order-0 immediately, hence the direct memory compaction overhead is avoided. In the allocation failure case, kswapd is waken up and doing compaction, so chances are allocation could success next time. alloc_skb_with_frags is the same. The mellanox driver does similar thing, if this is accepted, we must fix the driver too. V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric V2: make the changelog clearer Cc: Eric Dumazet <edumazet@google.com> Cc: Chris Mason <clm@fb.com> Cc: Debabrata Banerjee <dbavatar@gmail.com> Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12Merge tag 'drm-intel-fixes-2015-06-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Fix for the regression Linus called out, and another for probing dongles. * tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix DDC probe for passive adapters drm/i915: Properly initialize SDVO analog connectors
2015-06-12Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Two regression reverts, and two fixes, one for a dpm boot freeze. * 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO Revert "drm/radeon: adjust pll when audio is not enabled" Revert "drm/radeon: don't share plls if monitors differ in audio support" drm/radeon: fix freeze for laptop with Turks/Thames GPU.
2015-06-11mpls: handle device renames for per-device sysctlsRobert Shearman
If a device is renamed and the original name is subsequently reused for a new device, the following warning is generated: sysctl duplicate entry: /net/mpls/conf/veth0//input CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280 Call Trace: [<ffffffff81566aaf>] ? dump_stack+0x40/0x50 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router] [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth] [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75 Fix this by unregistering the previous sysctl table (registered for the path containing the original device name) and re-registering the table for the path containing the new device name. Fixes: 37bde79979c3 ("mpls: Per-device enabling of packet input") Reported-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11Merge branch 'tcp-gso-settings-defer'David S. Miller
Eric Dumazet says: ==================== tcp: defer shinfo->gso_size|type settings We put shinfo->gso_segs in TCP_SKB_CB(skb) a while back for performance reasons. This was in commit cd7d8498c9a5 ("tcp: change tcp_skb_pcount() location") This patch series complete the job for gso_size and gso_type, so that we do not bring 2 extra cache lines in tcp write xmit fast path, and making tcp_init_tso_segs() simpler and faster. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11tcp: remove obsolete check in tcp_set_skb_tso_segs()Eric Dumazet
We had various issues in the past when TCP stack was modifying gso_size/gso_segs while clones were in flight. Commit c52e2421f73 ("tcp: must unclone packets before mangling them") fixed these bugs and added a WARN_ON_ONCE(skb_cloned(skb)); in tcp_set_skb_tso_segs() These bugs are now fixed, and because TCP stack now only sets shinfo->gso_size|segs on the clone itself, the check can be removed. As a result of this change, compiler inlines tcp_set_skb_tso_segs() in tcp_init_tso_segs() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11tcp: fill shinfo->gso_size at last momentEric Dumazet
In commit cd7d8498c9a5 ("tcp: change tcp_skb_pcount() location") we stored gso_segs in a temporary cache hot location. This patch does the same for gso_size. This allows to save 2 cache line misses in tcp xmit path for the last packet that is considered but not sent because of various conditions (cwnd, tso defer, receiver window, TSQ...) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11tcp: tcp_set_skb_tso_segs() no longer need struct sock parameterEric Dumazet
tcp_set_skb_tso_segs() & tcp_init_tso_segs() no longer use the sock pointer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11tcp: fill shinfo->gso_type at last momentEric Dumazet
Our goal is to touch skb_shinfo(skb) only when absolutely needed, to avoid two cache line misses in TCP output path for last skb that is considered but not sent because of various conditions (cwnd, tso defer, receiver window, TSQ...) A packet is GSO only when skb_shinfo(skb)->gso_size is not zero. We can set skb_shinfo(skb)->gso_type to sk->sk_gso_type even for non GSO packets. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11tcp: reserve tcp_skb_mss() to tcp stackEric Dumazet
tcp_gso_segment() and tcp_gro_receive() are not strictly part of TCP stack. They should not assume tcp_skb_mss(skb) is in fact skb_shinfo(skb)->gso_size. This will allow us to change tcp_skb_mss() in following patches. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11switchdev: fix BUG when port driver doesn't support set attr opScott Feldman
Fix a BUG_ON() where CONFIG_NET_SWITCHDEV is set but the driver for a bridged port does not support switchdev_port_attr_set op. Don't BUG_ON() if -EOPNOTSUPP is returned. Also change BUG_ON() to netdev_err since this is a normal error path and does not warrant the use of BUG_ON(), which is reserved for unrecoverable errs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11net: igb: fix the start time for periodic output signalsRichard Cochran
When programming the start of a periodic output, the code wrongly places the seconds value into the "low" register and the nanoseconds into the "high" register. Even though this is backwards, it slipped through my testing, because the re-arming code in the interrupt service routine is correct, and the signal does appear starting with the second edge. This patch fixes the issue by programming the registers correctly. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11Merge branch 'bna-next'David S. Miller
Ivan Vecera says: ==================== bna: clean-up The patches clean the bna driver. v2: changes & comments requested by Joe ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: use netdev_* and dev_* instead of printk and pr_*Ivan Vecera
...and remove some of them. It is not necessary to log when .probe() and .remove() are called or when TxQ is started or stopped. Also log level of some of them was changed to more appropriate one (link up/down, firmware loading failure. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11bna: fix timeout API argument typeIvan Vecera
Timeout functions are defined with 'void *' ptr argument. They should be defined directly with 'struct bfa_ioc *' type to avoid type conversions. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 02:00:39 +0000