summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-23usb: typec: nb7vpq904m: fix CONFIG_DRM dependencyNeil Armstrong
With the following config set: CONFIG_DRM=m CONFIG_DRM_PANEL=y CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y CONFIG_TYPEC_MUX_NB7VPQ904M=y vmlinux fails on the following symbols: ld.lld: error: undefined symbol: devm_drm_bridge_add ld.lld: error: undefined symbol: devm_drm_of_get_bridge Add dependendy on DRM || DRM=no since CONFIG_DRM dependency is optional and guarded by: IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE) in the drive. Also add "select DRM_PANEL_BRIDGE if DRM" to clarify DRM_PANEL_BRIDGE is required if CONFIG_DRM is enabled. Fixes: 88d8f3ac9c67 ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver") Reported-by: Arnd Bergmann <arnd@kernel.org> Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Message-ID: <20230622-topic-sm8x50-upstream-redriver-config-fix-v1-1-005ab6f4d1f5@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-23usbip: usbip_host: Replace strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since return value of -errno is used to check for truncation instead of sizeof(dest). [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Message-ID: <20230615180504.401169-1-azeemshaikh38@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-23usb: dwc3: gadget: Propagate core init errors to UDC during pullupKrishna Kurapati
In scenarios where pullup relies on resume (get sync) to initialize the controller and set the run stop bit, then core_init is followed by gadget_resume which will eventually set run stop bit. But in cases where the core_init fails, the return value is not sent back to udc appropriately. So according to UDC the controller has started but in reality we never set the run stop bit. On systems like Android, there are uevents sent to HAL depending on whether the configfs_bind / configfs_disconnect were invoked. In the above mentioned scnenario, if the core init fails, the run stop won't be set and the cable plug-out won't result in generation of any disconnect event and userspace would never get any uevent regarding cable plug out and we never call pullup(0) again. Furthermore none of the next Plug-In/Plug-Out's would be known to configfs. Return back the appropriate result to UDC to let the userspace/ configfs know that the pullup failed so they can take appropriate action. Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-23Merge tag 'usb-serial-6.5-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.5-rc1 Here are the USB-serial updates for 6.5-rc1, including: - improved error handling for break signalling - report to user space when a device does not support break signalling Included are also some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add LARA-R6 01B PIDs USB: serial: report unsupported break signalling USB: serial: cp210x: disable break signalling on CP2105 SCI USB: serial: return errors from break handling
2023-06-22USB: serial: option: add LARA-R6 01B PIDsDavide Tronchin
The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 USB configurations (default, RmNet, CDC-ECM) are the same. In default mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-06-22usb: ulpi: Make container_of() no-op in to_ulpi_dev()Andy Shevchenko
Move embedded struct device member to make container_of() noop Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621163122.5693-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: gadget: legacy: fix error return code in gfs_bindWei Chen
We must return negative error code -ENOMEM if function 'usb_otg_descriptor_alloc()' fails. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Link: https://lore.kernel.org/r/20230621124323.47183-1-harperchen1110@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: typec: fsa4480: add support for Audio Accessory ModeNeil Armstrong
The FSA4480 Type-C switch supports switching the Audio R/L, AGND and MIC signals to the USB-C DP/DM and SBU1/2 to support the Audio Accessory Mode. The FSA4480 has an integrated Audio jack detection mechanism to automatically mux the AGND, MIX and Sense to the correct SBU lines to support 3 pole and both 4 pole TRRS pinouts. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-3-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: typec: fsa4480: rework mux & switch setup to handle more statesNeil Armstrong
In order to handle the Audio Accessory mode, refactor the mux and switch setup in a single function. The refactor will help add new states and make the process simpler to understand. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-2-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: typec: ucsi: call typec_set_mode on non-altmode partner changeNeil Armstrong
Add support for calling typec_set_mode() for the DEBUG, AUDIO accessory modes. Let's also call typec_set_mode() for USB as default and SAFE when partner is disconnected. The USB state is only called when ALT mode is specifically not specified by the partner status flags in order to leave the altmode handlers setup the proper mode to switches, muxes and retimers. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21Merge tag 'thunderbolt-for-v6.5-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.5 merge window This includes following Thunderbolt/USB4 changes for the v6.5 merge window: - Improve debug logging - Rework for TMU and CL states handling - Retimer access improvements - Initial support for USB4 v2 features: * 80G symmetric link support * New notifications * PCIe extended encapsulation * enhanced uni-directional TMU mode * CL2 link low power state * DisplayPort 2.x tunneling - Support for Intel Barlow Ridge Thunderbolt/USB4 controller - Minor fixes and improvements. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (55 commits) thunderbolt: Add test case for 3 DisplayPort tunnels thunderbolt: Add DisplayPort 2.x tunneling support thunderbolt: Make bandwidth allocation mode function names consistent thunderbolt: Enable CL2 low power state thunderbolt: Add support for enhanced uni-directional TMU mode thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controller thunderbolt: Move constants related to NVM into nvm.c thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth thunderbolt: Add Intel Barlow Ridge PCI ID thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulation thunderbolt: Announce USB4 v2 connection manager support thunderbolt: Reset USB4 v2 host router thunderbolt: Add the new USB4 v2 notification types thunderbolt: Add support for USB4 v2 80 Gb/s link thunderbolt: Identify USB4 v2 routers thunderbolt: Do not touch lane 1 adapter path config space thunderbolt: Ignore data CRC mismatch for USB4 routers ...
2023-06-20USB: gadget: f_hid: make hidg_class a static const structureIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, move the hidg_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230620094412.508580-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-20USB: gadget: f_printer: make usb_gadget_class a static const structureIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, move the usb_gadget_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230620094412.508580-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-20USB: mon: make mon_bin_class a static const structureIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, move the mon_bin_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230620094412.508580-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-20USB: gadget: udc: core: make udc_class a static const structureIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, move the udc_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230620094412.508580-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-20USB: roles: make role_class a static const structureIvan Orlov
Now that the driver core allows for struct class to be in read-only memory, move the role_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Link: https://lore.kernel.org/r/20230620094412.508580-7-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-20dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup ↵Piyush Mehta
interrupt The hibernation feature enabled for Xilinx Versal NET SoC in DWC3 IP. As the DWC3 IP supports the hibernation feature, to handle the wakeup or hibernation interrupt, add host mode "wakeup" interrupt-names optional property in the binding schema to capture remote-wakeup and connect/ disconnect event in the hibernation state and increased maxItems to 4 for the interrupts and interrupt-names property. We have a dedicated IRQ line specifically for the hibernation feature. When the "wakeup" IRQ line is triggered, it initiates a hibernation interrupt, causing the system to wake up from the hibernation state. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230619105032.2888128-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19dt-bindings: usb: Add StarFive JH7110 USB controllerMinda Chen
StarFive JH7110 platforms USB have a wrapper module around the Cadence USBSS-DRD controller. Add binding information doc for that. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230518112750.57924-6-minda.chen@starfivetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19dt-bindings: usb: dwc3: Add IPQ9574 compatibleVaradarajan Narayanan
* Document the IPQ9574 dwc3 compatible. * Make power-domains as optional since IPQ9574 doesn't have GDSCs Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/27fc578e549e12a4d689cdd434107964b529c4f4.1686289721.git.quic_varada@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"Colin Ian King
There is a spelling mistake in a trace message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230615144052.2254528-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19usb: gadget: function: printer: Replace strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since return value of -errno is used to check for truncation instead of PAGE_SIZE. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Link: https://lore.kernel.org/r/20230615180318.400639-1-azeemshaikh38@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19usb: typec: tcpm: add get max power supportFrank Wang
Traverse fixed pdos to calculate the maximum power that the charger can provide, and it can be get by POWER_SUPPLY_PROP_INPUT_POWER_LIMIT property. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230616075241.27690-2-frank.wang@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19usb: typec: tcpm: fix cc role at port resetFrank Wang
In the current implementation, the tcpm set CC1/CC2 role to open when it do port reset would cause the VBUS removed by the Type-C partner. This sets CC1/CC2 according to the default state of port to fix it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230616075241.27690-1-frank.wang@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-16thunderbolt: Add test case for 3 DisplayPort tunnelsMika Westerberg
Intel Barlow Ridge Thunderbolt controller has 3 DP IN adapters. This allows 3 simultaneus DisplayPort tunnels through either one or two USB4 downstream ports (in any possible configuration). Add test case for this. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add DisplayPort 2.x tunneling supportMika Westerberg
This adds support for the UHBR (Ultra High Bit Rate) bandwidths introduced with DisplayPort 2.0 (and refined in 2.1). These can go up to 80 Gbit/s and their support is represent in additional bits in the DP IN capability. This updates the DisplayPort tunneling to support these new rates too. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Make bandwidth allocation mode function names consistentMika Westerberg
Make sure the DisplayPort bandwidth allocation mode function names are consistent with the existing ones, such as USB3. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Enable CL2 low power stateMika Westerberg
For USB4 v2 routers we can also enable CL2 which allows better power savings and thermal management than CL0s and CL1. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add support for enhanced uni-directional TMU modeMika Westerberg
This is new TMU mode introduced with the USB4 v2. This mode is simpler than the existing ones and allows all CL states as well. Enable this for all links where both side routers are v2 and keep the existing functionality for the v1 and earlier links. Currently only support the MedRes rate. We can add the HiFi rate later too if it turns out to be useful. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controllerGil Fine
Intel Barlow Ridge discrete USB4 controller has larger NOR Flash, hence increase NVM_MAX_SIZE to support it. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Move constants related to NVM into nvm.cGil Fine
Move constants related to NVM into nvm.c to make the code cleaner. Use a separate constant for USB4_DATA_DWORDS in usb4.c. No functional changes. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Limit Intel Barlow Ridge USB3 bandwidthMika Westerberg
Intel Barlow Ridge discrete USB4 host router has the same limitation as the previous generations so make sure the USB3 bandwidth limitation quirk is applied to Barlow Ridge too. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add Intel Barlow Ridge PCI IDMika Westerberg
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The controller exposes standard USB4 PCI class ID in typical configurations, however there is a way to configure it so that it uses a special class ID to allow using s different driver than the Windows inbox one. For this reason add the Barlow Ridge PCI ID to the Linux driver too so that the driver can attach regardless of the class ID. Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Fix PCIe adapter capability length for USB4 v2 routersGil Fine
For USB4 v2 routers, the PCIe adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routersGil Fine
For USB4 v2 routers, the DisplayPort IN adapter capability length is longer. Display the correct capability length in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add two additional double words for adapters TMU for USB4 v2 ↵Gil Fine
routers For USB4 v2 routers, the adapters's TMU capability has two additional double words. Include them in the debugfs register dump. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulationGil Fine
USB4 v2 spec introduces modified encapsulation of PCIe TLP and DLLP packets. This improves the PCIe tunneled traffic usage by reducing overhead. Enable this if both sides of the link support it. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Announce USB4 v2 connection manager supportGil Fine
Program the CMUV (Connection Manager USB4 Version) field for USB4 v2 and v1 routers according to the spec. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Reset USB4 v2 host routerMika Westerberg
USB4 v2 added a bit that can be used to reset the host router so we use this to trigger reset when the driver probes. This will reset the already connected topology as well but doing this simplifies things a lot if for instance the link is already set to asymmetric. We also add a module parameter to prevent this in case of problems. While there rename the REG_HOP_COUNT to REG_CAPS to match the USB4 spec naming better. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add the new USB4 v2 notification typesMika Westerberg
USB4 v2 spec adds a bunch of new notifications that the connection manager can use instead of polling. While we do not use these yet we need to ack the ones routers expect to be acked. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Add support for USB4 v2 80 Gb/s linkGil Fine
USB4 v2 bumps the per-lane speed up to 40 Gb/s. Also the lanes are always bonded which gives 80 Gb/s symmetric link (and 120/40 Gb/s asymmetric). This updates the speed and width of routers and XDomain connections to support the Gen 4 link. For now we keep the link as is even if it is already asymmetric. While there make tb_port_set_link_width() static. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Identify USB4 v2 routersGil Fine
Add a new function usb4_switch_version() that can be used to figure out the spec version of the router and make tb_switch_is_usb4() to use it as well. Update the uevent accordingly. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Do not touch lane 1 adapter path config spaceMika Westerberg
It is not required to be implemented at all because USB4 does not use lane 1 for tunneling except when aggregated with lane 0. For this reason do not try to read the path config space of USB4 lane 1 adapters. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-16thunderbolt: Ignore data CRC mismatch for USB4 routersMika Westerberg
This is also something not always updated after the DROM contents itself so issue warning but continue parsing it as we do for pre-USB4 DROMs too. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-06-15usb: typec: add support for the nb7vpq904m Type-C Linear RedriverDmitry Baryshkov
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed and DisplayPort ALT Mode Linear Redriver chip found on some devices with a Type-C port. The redriver compensates ultra High-Speeed DisplayPort and USB Super Speed signal integrity losses mainly due to PCB & transmission cables. The redriver doesn't support SuperSpeed lines swapping, but can support Type-C SBU lines swapping. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15MAINTAINERS: USB: add uapi header files to USB SUBSYSTEM entryGreg Kroah-Hartman
For some reason the include/uapi/linux/usb/ directory is missing in the USB SUBSYSTEM entry, so get_maintainer will not know to cc: the proper mailing lists. Fix this up by adding an entry for this directory. Message-ID: <20230615094306.2072827-2-gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15dt-bindings: reset: convert the xlnx,zynqmp-reset.txt to yamlPiyush Mehta
Convert the binding to DT schema format. It also updates the reset-controller description. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230613123048.2935502-1-piyush.mehta@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver ↵Neil Armstrong
bindings Document bindings for this ON Semiconductor Type-C USB SuperSpeed and DisplayPort ALT Mode Linear Redriver. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-ID: <20230601-topic-sm8x50-upstream-redriver-v3-1-988c560e2195@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15usb: ch9: Replace 1-element array with flexible arrayKees Cook
Since commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3"), UBSAN_BOUNDS no longer pretends 1-element arrays are unbounded. Walking wData will trigger a warning, so make it a proper flexible array. Add a union to keep the struct size identical for userspace in case anything was depending on the old size. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202306102333.8f5a7443-oliver.sang@intel.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kernel test robot <lkp@intel.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Jó Ágila Bitsch" <jgilab@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Message-ID: <20230614181307.gonna.256-kees@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial ↵Greg Kroah-Hartman
detection" This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K <quic_prashk@quicinc.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13usb: chipidea: imx: add missing USB PHY DPDM wakeup settingXu Yang
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup is not required(/sys/.../wakeup is disabled), this bit should be disabled, otherwise we will have unexpected wakeup if do USB device connect/disconnect while system sleep. This bit can be enabled for both host and device mode. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-08 03:36:08 +0000