| Age | Commit message (Collapse) | Author |
|---|
|
anon_inode_getfd() should be used *ONLY* in situations when we are
guaranteed to be past the last failure point (including copying the
descriptor number to userland, at that). And ksys_close() should
not be used for cleanups at all.
anon_inode_getfile() is there for all nontrivial cases like that.
Just use that...
Fixes: b3e583825266 ("clone: add CLONE_PIDFD")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
The usage of emulated and _TIF_SYSCALL_EMU flags in syscall_trace_enter
is more complicated than required.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The segment descriptors are loaded with an implicitly LOCK-ed instruction,
which could trigger the split lock #AC exception if the variable is not
properly aligned and crosses a cache line.
Align the GDT properly so the descriptors are all 8 byte aligned.
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lkml.kernel.org/r/20190627045525.105266-1-xiaoyao.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail
can control `struct cpuhp_step *sp` address, results in the following
global-out-of-bounds read.
Reproducer:
# echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail
KASAN report:
BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0
Read of size 8 at addr ffffffff89734438 by task bash/1941
CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31
Call Trace:
write_cpuhp_fail+0x2cd/0x2e0
dev_attr_store+0x58/0x80
sysfs_kf_write+0x13d/0x1a0
kernfs_fop_write+0x2bc/0x460
vfs_write+0x1e1/0x560
ksys_write+0x126/0x250
do_syscall_64+0xc1/0x390
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f05e4f4c970
The buggy address belongs to the variable:
cpu_hotplug_lock+0x98/0xa0
Memory state around the buggy address:
ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
^
ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Add a sanity check for the value written from user space.
Fixes: 1db49484f21ed ("smp/hotplug: Hotplug state fail injection")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
|
|
Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:
crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'
This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The same bug that gcc hit in the past is apparently now showing
up with clang, which decides to inline __serpent_setkey_sbox:
crypto/serpent_generic.c:268:5: error: stack frame size of 2112 bytes in function '__serpent_setkey' [-Werror,-Wframe-larger-than=]
Marking it 'noinline' reduces the stack usage from 2112 bytes to
192 and 96 bytes, respectively, and seems to generate more
useful object code.
Fixes: c871c10e4ea7 ("crypto: serpent - improve __serpent_setkey with UBSAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The largest stack object in this file is now the shash descriptor.
Since there are many other stack variables, this can push it
over the 1024 byte warning limit, in particular with clang and
KASAN:
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
Make test_hash_vs_generic_impl() do the same thing as the
corresponding eaed and skcipher functions by allocating the
descriptor dynamically. We can still do better than this,
but it brings us well below the 1024 byte limit.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9a8a6b3f0950 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On arm32, we get warnings about high stack usage in some of the functions:
crypto/testmgr.c:2269:12: error: stack frame size of 1032 bytes in function 'alg_test_aead' [-Werror,-Wframe-larger-than=]
static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
^
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
static int __alg_test_hash(const struct hash_testvec *vecs,
^
On of the larger objects on the stack here is struct testvec_config, so
change that to dynamic allocation.
Fixes: 40153b10d91c ("crypto: testmgr - fuzz AEADs against their generic implementation")
Fixes: d435e10e67be ("crypto: testmgr - fuzz skciphers against their generic implementation")
Fixes: 9a8a6b3f0950 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When building for SEC1 only, talitos2_done functions are unneeded
and should go away.
For this, use has_ftr_sec1() which will always return true when only
SEC1 support is being built, allowing GCC to drop TALITOS2 functions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After the latest addition, the stack usage of sun4i_ss_cipher_poll
grew beyond the warning limit when KASAN is enabled:
drivers/crypto/sunxi-ss/sun4i-ss-cipher.c:118:12: error: stack frame size of 1152 bytes in function 'sun4i_ss_cipher_poll' [-Werror,-Wframe-larger-than=]
static int sun4i_ss_cipher_poll(struct skcipher_request *areq)
Reduce it in three ways:
- split out the new code into a separate function so its stack
usage can overlap that of the sun4i_ss_opti_poll() code path
- mark both special cases as noinline_for_stack, which should
ideally result in a tail call that frees the rest of the
stack
- move the buf and obuf variables into the code blocks in
which they are used.
The three separate functions now use 144, 640 and 304 bytes of kernel
stack, respectively.
Fixes: 0ae1f46c55f8 ("crypto: sun4i-ss - fallback when length is not multiple of blocksize")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add check to verify the stated device tree HW configuration
matches the HW.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ccree irq may be shared with other devices, in order to prevent ccree isr
handling while device maybe suspended we added a check to verify that the
device is not suspended.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case of driver probe and pm resume we need to check that the cryptocell
hardware reset cycle is completed. during the reset cycle that Cryptocell
provide read only access to the APB interface which allows to verify
through the CC registers that the reset is completed. Until reset
completion we assume that any write/crypto operation is blocked.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AF_PACKET
When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel. This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).
However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.
We can fix this by converting the schedule call to a completion
mechanism. By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.
Tested by myself and the reporter, with good results
Change Notes:
V1->V2:
Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)
V2->V3:
Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status. Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)
Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)
V3->V4:
Willem has requested that the control flow be restored to the
previous state. Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call. This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed. To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.
Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,
Here to fix it by only holding the sk when auth shkey is created
successfully.
Fixes: a29a5bd4f5c3 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
virtio- Don't call drm_connector_update_edid_property() while holding spinlock
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626205615.GA123489@art_vandelay
|
|
Some debug code suggested by Paolo was tripping when I did reboot
stress tests. Specifically in bfq_bfqq_resume_state()
"bic->saved_wr_start_at_switch_to_srt" was later than the current
value of "jiffies". A bit of debugging showed that
"bic->saved_wr_start_at_switch_to_srt" was actually 0 and a bit more
debugging showed that was because we had run through the "unlikely"
case in the bfq_bfqq_save_state() function.
Let's init "saved_wr_start_at_switch_to_srt" in the unlikely case to
something sane.
NOTE: this fixes no known real-world errors.
Reviewed-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the comment since vmalloc_fault doesn't reach
flush_tlb_fix_spurious_fault.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
At Bin Meng's request, add the MIT license as an option for the SiFive
FU540 PRCI header file.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
|
|
There's no need to use a .rst on Sphinx toc tables. As most of
the Documentation don't use, remove the remaing occurrences.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Build of htmldocs fails for out-of-tree builds:
$ make V=1 O=~/build/kernel/ htmldocs
make -C /home/rppt/build/kernel -f /home/rppt/git/linux-docs/Makefile htmldocs
make[1]: Entering directory '/home/rppt/build/kernel'
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=Documentation htmldocs
Can't open Documentation/conf.py at /home/rppt/git/linux-docs/scripts/sphinx-pre-install line 230.
/home/rppt/git/linux-docs/Documentation/Makefile:80: recipe for target 'htmldocs' failed
make[2]: *** [htmldocs] Error 2
The scripts/sphinx-pre-install is trying to open files in the current
directory which is $KBUILD_OUTPUT rather than in $srctree.
Fix it.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Somehow, this file ended with Documentation/ twice.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Newer devices like Yubikey 5 and Nitrokey Pro 2 have added support for
NISTP's implementation of ECC cryptography, so update the guide
accordingly and add a note on when to use nistp256 and when to use
ed25519 for generating S keys.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
There are platforms that do not call pm_set_suspend_via_firmware(),
so pm_suspend_via_firmware() returns 'false' on them, but the power
states of PCI devices (PCIe ports in particular) are changed as a
result of powering down core platform components during system-wide
suspend. Thus the pm_suspend_via_firmware() checks in
pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by
commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-
idle") are not sufficient to determine that devices left in D0
during suspend will remain in D0 during resume and so the bus-level
power management can be skipped for them.
For this reason, introduce a new global suspend flag,
PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only
and replace the pm_suspend_via_firmware() checks mentioned above
with checks against this flag.
Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Palmer Dabbelt says:
====================
net: macb: Fix compilation on systems without COMMON_CLK, v2
Our patch to add support for the FU540-C000 broke compilation on at
least powerpc allyesconfig, which was found as part of the linux-next
build regression tests. This must have somehow slipped through the
cracks, as the patch has been reverted in linux-next for a while now.
This patch applies on top of the offending commit, which is the only one
I've even tried it on as I'm not sure how this subsystem makes it to
Linus.
This patch set fixes the issue by adding a dependency of COMMON_CLK to
the MACB Kconfig entry, which avoids the build failure by disabling MACB
on systems where it wouldn't compile. All known users of MACB have
COMMON_CLK, so this shouldn't cause any issues. This is a significantly
simpler approach than disabling just the FU540-C000 support.
I've also included a second patch to indicate this is a driver for a
Cadence device that was originally written by an engineer at Atmel. The
only relation is that I stumbled across it when writing the first patch.
Changes since v1 <20190624061603.1704-1-palmer@sifive.com>:
* Disable MACB on systems without COMMON_CLK, instead of just disabling
the FU540-C000 support on these systems.
* Update the commit message to reflect the driver was written by Atmel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The help text makes it look like NET_VENDOR_CADENCE enables support for
Atmel devices, when in reality it's a driver written by Atmel that
supports Cadence devices. This may confuse users that have this device
on a non-Atmel SoC.
The fix is just s/Atmel/Cadence/, but I did go and re-wrap the Kconfig
help text as that change caused it to go over 80 characters.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit c218ad559020 ("macb: Add support for SiFive FU540-C000") added a
dependency on the common clock framework to the macb driver, but didn't
express that dependency in Kconfig. As a result macb now fails to
compile on systems without COMMON_CLK, which specifically causes a build
failure on powerpc allyesconfig.
This patch adds the dependency, which results in the macb driver no
longer being selectable on systems without the common clock framework.
All known systems that have this device already support the common clock
framework, so this should not cause trouble for any uses. Supporting
both the FU540-C000 and systems without COMMON_CLK is quite ugly.
I've build tested this on powerpc allyesconfig and RISC-V defconfig
(which selects MACB), but I have not even booted the resulting kernels.
Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nicolas Dichtel says:
====================
ipv6: fix neighbour resolution with raw socket
The first patch prepares the fix, it constify rt6_nexthop().
The detail of the bug is explained in the second patch.
v1 -> v2:
- fix compilation warnings
- split the initial patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The scenario is the following: the user uses a raw socket to send an ipv6
packet, destinated to a not-connected network, and specify a connected nh.
Here is the corresponding python script to reproduce this scenario:
import socket
IPPROTO_RAW = 255
send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW)
# scapy
# p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest()
# str(p)
req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00'
send_s.sendto(req, ('fd00:175::2', 0, 0, 0))
fd00:175::/64 is a connected route and fd00:200::fa is not a connected
host.
With this scenario, the kernel starts by sending a NS to resolve
fd00:175::2. When it receives the NA, it flushes its queue and try to send
the initial packet. But instead of sending it, it sends another NS to
resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If
the user sends again the packet, it now uses the right nh (fd00:175::2).
The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is
:: because the associated route is a connected route, thus it uses the dst
addr of the packet. Let's use rt6_nexthop() to choose the right nh.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no functional change in this patch, it only prepares the next one.
rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch
reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly
fine for the kernel to sleep for a bit in ksz_switch_register().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The longstanding prohibition against using 0.0.0.0/8 dates back
to two issues with the early internet.
There was an interoperability problem with BSD 4.2 in 1984, fixed in
BSD 4.3 in 1986. BSD 4.2 has long since been retired.
Secondly, addresses of the form 0.x.y.z were initially defined only as
a source address in an ICMP datagram, indicating "node number x.y.z on
this IPv4 network", by nodes that know their address on their local
network, but do not yet know their network prefix, in RFC0792 (page
19). This usage of 0.x.y.z was later repealed in RFC1122 (section
3.2.2.7), because the original ICMP-based mechanism for learning the
network prefix was unworkable on many networks such as Ethernet (which
have longer addresses that would not fit into the 24 "node number"
bits). Modern networks use reverse ARP (RFC0903) or BOOTP (RFC0951)
or DHCP (RFC2131) to find their full 32-bit address and CIDR netmask
(and other parameters such as default gateways). 0.x.y.z has had
16,777,215 addresses in 0.0.0.0/8 space left unused and reserved for
future use, since 1989.
This patch allows for these 16m new IPv4 addresses to appear within
a box or on the wire. Layer 2 switches don't care.
0.0.0.0/32 is still prohibited, of course.
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: John Gilmore <gnu@toad.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.
The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.
The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.
Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dst_default_metrics has all of the metrics initialized to 0, so nothing
will be added to the skb in rtnetlink_put_metrics. Avoid the loop if
metrics is from dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Puranjay Mohan says:
====================
net: fddi: skfp: Use PCI generic definitions instead of private duplicates
This patch series removes the private duplicates of PCI definitions in
favour of generic definitions defined in pci_regs.h.
This driver only uses some of the generic PCI definitons,
which are included from pci_regs.h and thier private versions
are removed from skfbi.h with all other private defines.
The skfbi.h defines PCI_REV_ID and other private defines with different
names, these are renamed to Generic PCI names to make them
compatible with defines in pci_regs.h.
All unused defines are removed from skfbi.h.
Changes in v5:
Removed unused PCI definitions which were left in v4
Changes in v4:
Removed unused PCI definitions which were left in v3
Changes in v3:
Renamed all local PCI definitions to Generic names.
Corrected coding style mistakes.
Changes in v2:
Converted individual patches to a series.
Made sure that individual patches build correctly
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove unused private PCI definitions from skfbi.h because generic PCI
symbols are already included from pci_regs.h.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include the uapi/linux/pci_regs.h header file which contains the generic
PCI defines.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the PCI_REV_ID and other local defines to Generic PCI define names
in skfbi.h and drvfbi.c to make it compatible with the pci_regs.h.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create key domain tags for network namespaces and make it possible to
automatically tag keys that are used by networked services (e.g. AF_RXRPC,
AFS, DNS) with the default network namespace if not set by the caller.
This allows keys with the same description but in different namespaces to
coexist within a keyring.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-afs@lists.infradead.org
|
|
If a key operation domain (such as a network namespace) has been removed
then attempt to garbage collect all the keys that use it.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Currently a key has a standard matching criteria of { type, description }
and this is used to only allow keys with unique criteria in a keyring.
This means, however, that you cannot have keys with the same type and
description but a different target namespace in the same keyring.
This is a potential problem for a containerised environment where, say, a
container is made up of some parts of its mount space involving netfs
superblocks from two different network namespaces.
This is also a problem for shared system management keyrings such as the
DNS records keyring or the NFS idmapper keyring that might contain keys
from different network namespaces.
Fix this by including a namespace component in a key's matching criteria.
Keyring types are marked to indicate which, if any, namespace is relevant
to keys of that type, and that namespace is set when the key is created
from the current task's namespace set.
The capability bit KEYCTL_CAPS1_NS_KEY_TAG is set if the kernel is
employing this feature.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Move the user and user-session keyrings to the user_namespace struct rather
than pinning them from the user_struct struct. This prevents these
keyrings from propagating across user-namespaces boundaries with regard to
the KEY_SPEC_* flags, thereby making them more useful in a containerised
environment.
The issue is that a single user_struct may be represent UIDs in several
different namespaces.
The way the patch does this is by attaching a 'register keyring' in each
user_namespace and then sticking the user and user-session keyrings into
that. It can then be searched to retrieve them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jann Horn <jannh@google.com>
|
|
Keyring names are held in a single global list that any process can pick
from by means of keyctl_join_session_keyring (provided the keyring grants
Search permission). This isn't very container friendly, however.
Make the following changes:
(1) Make default session, process and thread keyring names begin with a
'.' instead of '_'.
(2) Keyrings whose names begin with a '.' aren't added to the list. Such
keyrings are system specials.
(3) Replace the global list with per-user_namespace lists. A keyring adds
its name to the list for the user_namespace that it is currently in.
(4) When a user_namespace is deleted, it just removes itself from the
keyring name list.
The global keyring_name_lock is retained for accessing the name lists.
This allows (4) to work.
This can be tested by:
# keyctl newring foo @s
995906392
# unshare -U
$ keyctl show
...
995906392 --alswrv 65534 65534 \_ keyring: foo
...
$ keyctl session foo
Joined session keyring: 935622349
As can be seen, a new session keyring was created.
The capability bit KEYCTL_CAPS1_NS_KEYRING_NAME is set if the kernel is
employing this feature.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
|
|
Add a 'recurse' flag for keyring searches so that the flag can be omitted
and recursion disabled, thereby allowing just the nominated keyring to be
searched and none of the children.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Cache the hash of the key's type and description in the index key so that
we're not recalculating it every time we look at a key during a search.
The hash function does a bunch of multiplications, so evading those is
probably worthwhile - especially as this is done for every key examined
during a search.
This also allows the methods used by assoc_array to get chunks of index-key
to be simplified.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Simplify key description management by cramming the word containing the
length with the first few chars of the description also. This simplifies
the code that generates the index-key used by assoc_array. It should speed
up key searching a bit too.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Kill off request_key_async{,_with_auxdata}() as they're not currently used.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull single MD warning fix from Song.
* 'md-next' of https://github.com/liu-song-6/linux:
md/raid1: Fix a warning message in remove_wb()
|
|
Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.
v2: Make it non vrf specific (David Ahern). Reword the changelog to
reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
