summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-29perf tools: Make sure fixdep is built before libbpfJiri Olsa
While doing 'make -C tools/perf build-test': LD fixdep-in.o LINK fixdep /bin/sh: /home/acme/git/linux/tools/build/fixdep: Permission denied make[6]: *** [bpf.o] Error 1 make[5]: *** [libbpf-in.o] Error 2 make[4]: *** [/home/acme/git/linux/tools/lib/bpf/libbpf.a] Error 2 make[4]: *** Waiting for unfinished jobs.... The fixdep tool needs to be built as the first binary. Libraries are built in paralel, so each of them needs to depend on fixdep target. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20151028204450.GA25553@krava.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29perf script: Enable printing of branch stackStephane Eranian
This patch improves perf script by enabling printing of the branch stack via the 'brstack' and 'brstacksym' arguments to the field selection option -F. The option is off by default and operates only if the perf.data file has branch stack content. The branches are printed in to/from pairs. The most recent branch is printed first. The number of branch entries vary based on the underlying hardware and filtering used. The brstack prints FROM/TO addresses in raw hexadecimal format. The brstacksym prints FROM/TO addresses in symbolic form wherever possible. $ perf script -F ip,brstack 5d3000 0x401aa0/0x5d2000/M/-/-/-/0 ... $ perf script -F ip,brstacksym 4011e0 noploop+0x0/noploop+0x0/P/-/-/0 The notation F/T/M/X/A/C describes the attributes of the branch. F=from, T=to, M/P=misprediction/prediction, X=TSX, A=TSX abort, C=cycles (SKL) Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yuanfang Chen <cyfmxc@gmail.com> Link: http://lkml.kernel.org/r/1441039273-16260-5-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29arm64: page-align sections for DEBUG_RODATAMark Rutland
A kernel built with DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA doesn't have .text aligned to a page boundary, though fixup_executable works at page-granularity thanks to its use of create_mapping. If .text is not page-aligned, the first page it exists in may be marked non-executable, leading to failures when an attempt is made to execute code in said page. This patch upgrades ALIGN_DEBUG_RO and ALIGN_DEBUG_RO_MIN to force page alignment for DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA kernels, ensuring that all sections with specific RWX permission requirements are mapped with the correct permissions. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Laura Abbott <laura@labbott.name> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: da141706aea52c1a ("arm64: add better page protections to arm64") Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-29arm64: Fix build with CONFIG_ZONE_DMA=nRobin Murphy
Trying to build with CONFIG_ZONE_DMA=n leaves visible references to the now-undefined ZONE_DMA, resulting in a syntax error. Hide the references behind an #ifdef instead of using IS_ENABLED. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-29arm64: Fix compat register mappingsRobin Murphy
For reasons not entirely apparent, but now enshrined in history, the architectural mapping of AArch32 banked registers to AArch64 registers actually orders SP_<mode> and LR_<mode> backwards compared to the intuitive r13/r14 order, for all modes except FIQ. Fix the compat_<reg>_<mode> macros accordingly, in the hope of avoiding subtle bugs with KVM and AArch32 guests. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-29arm64/efi: do not assume DRAM base is aligned to 2 MBArd Biesheuvel
The current arm64 Image relocation code in the UEFI stub assumes that the dram_base argument it receives is always a multiple of 2 MB. In reality, it is simply the lowest start address of all RAM entries in the UEFI memory map, which means it could be any multiple of 4 KB. Since the arm64 kernel Image needs to reside TEXT_OFFSET bytes beyond a 2 MB aligned base, or it will fail to boot, make sure we round dram_base to 2 MB before using it to calculate the relocation address. Fixes: e38457c361b30c5a ("arm64: efi: prefer AllocatePages() over efi_low_alloc() for vmlinux") Reported-by: Timur Tabi <timur@codeaurora.org> Tested-by: Timur Tabi <timur@codeaurora.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-10-29Merge branches 'fixes' and 'misc' into for-nextRussell King
2015-10-29ARM: 8449/1: fix bug in vdsomunge swab32 macroH. Nikolaus Schaller
Commit 8a603f91cc48 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") unfortunately introduced a bug created but not found during discussion and patch simplification. Reported-by: Efraim Yawitz <efraim.yawitz@gmail.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Fixes: 8a603f91cc48 ("ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h") Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-10-29drm/radeon: fix dpms when driver backlight control is disabledAlex Deucher
If driver backlight control is disabled, either by driver parameter or default per-asic setting, revert to the old behavior. Fixes a regression in commit: 4281f46ef839050d2ef60348f661eb463c21cc2e Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-29drm/radeon: move bl encoder assignment into bl initAlex Deucher
So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-29KVM: s390: use simple switch statement as multiplexerChristian Borntraeger
We currently do some magic shifting (by exploiting that exit codes are always a multiple of 4) and a table lookup to jump into the exit handlers. This causes some calculations and checks, just to do an potentially expensive function call. Changing that to a switch statement gives the compiler the chance to inline and dynamically decide between jump tables or inline compare and branches. In addition it makes the code more readable. bloat-o-meter gives me a small reduction in code size: add/remove: 0/7 grow/shrink: 1/1 up/down: 986/-1334 (-348) function old new delta kvm_handle_sie_intercept 72 1058 +986 handle_prog 704 696 -8 handle_noop 54 - -54 handle_partial_execution 60 - -60 intercept_funcs 120 - -120 handle_instruction 198 - -198 handle_validity 210 - -210 handle_stop 316 - -316 handle_external_interrupt 368 - -368 Right now my gcc does conditional branches instead of jump tables. The inlining seems to give us enough cycles as some micro-benchmarking shows minimal improvements, but still in noise. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-29KVM: s390: drop useless newline in debugging dataChristian Borntraeger
the s390 debug feature does not need newlines. In fact it will result in empty lines. Get rid of 4 leftovers. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-10-29KVM: s390: SCA must not cross page boundariesDavid Hildenbrand
We seemed to have missed a few corner cases in commit f6c137ff00a4 ("KVM: s390: randomize sca address"). The SCA has a maximum size of 2112 bytes. By setting the sca_offset to some unlucky numbers, we exceed the page. 0x7c0 (1984) -> Fits exactly 0x7d0 (2000) -> 16 bytes out 0x7e0 (2016) -> 32 bytes out 0x7f0 (2032) -> 48 bytes out One VCPU entry is 32 bytes long. For the last two cases, we actually write data to the other page. 1. The address of the VCPU. 2. Injection/delivery/clearing of SIGP externall calls via SIGP IF. Especially the 2. happens regularly. So this could produce two problems: 1. The guest losing/getting external calls. 2. Random memory overwrites in the host. So this problem happens on every 127 + 128 created VM with 64 VCPUs. Cc: stable@vger.kernel.org # v3.15+ Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-29perf trace: Add cmd string table to decode sys_bpf first argArnaldo Carvalho de Melo
# perf trace -e bpf perf record -e /tmp/foo.o -a 362.779 (0.130 ms): perf/3451 bpf(cmd: PROG_LOAD, uattr: 0x7ffe9a6825d0, size: 48) = 3 Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2b0nknu53baz9e0wj4thcdd8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29ipv6: protect mtu calculation of wrap-around and infinite loop by rounding ↵Hannes Frederic Sowa
issues Raw sockets with hdrincl enabled can insert ipv6 extension headers right into the data stream. In case we need to fragment those packets, we reparse the options header to find the place where we can insert the fragment header. If the extension headers exceed the link's MTU we actually cannot make progress in such a case. Instead of ending up in broken arithmetic or rounding towards 0 and entering an endless loop in ip6_fragment, just prevent those cases by aborting early and signal -EMSGSIZE to user space. This is the second version of the patch which doesn't use the overflow_usub function, which got reverted for now. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29Revert "Merge branch 'ipv6-overflow-arith'"Hannes Frederic Sowa
Linus dislikes these changes. To not hold up the net-merge let's revert it for now and fix the bug like Linus suggested. This reverts commit ec3661b42257d9a06cf0d318175623ac7a660113, reversing changes made to c80dbe04612986fd6104b4a1be21681b113b5ac9. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-29Merge ath-next from ath.gitKalle Valo
Major changes: ath10k: * add QCA9377 support * fw_stats support for 10.4 firmware ath6kl: * report antenna configuration to user space * implement ethtool stats
2015-10-29ARC: mm: PAE40 supportVineet Gupta
This is the first working implementation of 40-bit physical address extension on ARCv2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-29Merge tag 'perf-ebpf-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull basic perf/ebpf integration: "Please see the changeset comments, but this is the very basic integration of perf with libbpf that, given a .o file built for the 'bpf' target with clang, will get it validated and loaded into the kernel via the sys_bpf syscall, which can be seen using 'perf trace' to trace the whole thing looking just for the bpf and perf_event_open syscalls: # perf trace -e bpf,perf_event_open perf record -g --event /tmp/foo.o -a 362.779 ( 0.129 ms): perf/22408 bpf(cmd: 5, uattr: 0x7ffd4edb6db0, size: 48 ) = 3 384.192 ( 0.016 ms): perf/22408 perf_event_open(attr_uptr: 0x7ffd4edbace0, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 5 384.247 ( 0.038 ms): perf/22408 perf_event_open(attr_uptr: 0x37aedd8, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 5 384.261 ( 0.007 ms): perf/22408 perf_event_open(attr_uptr: 0x37aedd8, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 5 387.680 ( 3.413 ms): perf/22408 perf_event_open(attr_uptr: 0x3222f08, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 5 387.688 ( 0.005 ms): perf/22408 perf_event_open(attr_uptr: 0x3222f08, pid: -1, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 6 387.693 ( 0.004 ms): perf/22408 perf_event_open(attr_uptr: 0x3222f08, pid: -1, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 7 387.698 ( 0.003 ms): perf/22408 perf_event_open(attr_uptr: 0x3222f08, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.221 MB perf.data (2 samples) ] # perf script bash 18389 [002] 83446.412607: perf_bpf_probe:fork: (ffffffff8109be30) 29be31 _do_fork (/lib/modules/4.3.0-rc6+/build/vmlinux) 96d662 tracesys_phase2 (/lib/modules/4.3.0-rc6+/build/vmlinux) bd56c __libc_fork (/usr/lib64/libc-2.17.so) 413b2 make_child (/usr/bin/bash) bash 18389 [002] 83447.227255: perf_bpf_probe:fork: (ffffffff8109be30) 29be31 _do_fork (/lib/modules/4.3.0-rc6+/build/vmlinux) 96d662 tracesys_phase2 (/lib/modules/4.3.0-rc6+/build/vmlinux) bd56c __libc_fork (/usr/lib64/libc-2.17.so) 413b2 make_child (/usr/bin/bash) # perf evlist -v perf_bpf_probe:fork: type: 2, size: 112, config: 0x6cf, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # More work is about to be reviewed, tested and merged that will allow the whole process of going from a .c file to an .o file via clang, etc to be done automagically. (Wang Nan)" Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-29ath6kl: implement ethtool statsBen Greear
This supports a way to get target stats through normal ethtool stats API. For instance: # ethtool -S wlan1 NIC statistics: tx_pkts_nic: 353 tx_bytes_nic: 25142 rx_pkts_nic: 6 rx_bytes_nic: 996 d_tx_ucast_pkts: 89 d_tx_bcast_pkts: 264 d_tx_ucast_bytes: 3020 d_tx_bcast_bytes: 22122 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: break stats gathering code into separate methodBen Greear
This will allow us to call it from elsewhere when implementing ethtool stats. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: fix firmware version assignmentBen Greear
Improper use of strlcpy caused garbage to be appended to the firmware version string. Fix this by paying attention to the ie_lenth. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: add error message to explain lack of HTBen Greear
It can take a user a while to understand why their NIC that advertises 802.11n support cannot actually do 802.11n. Print out a warning in the logs to save the next poor person to use this NIC some trouble. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath6kl: report antenna configurationBen Greear
This lets 'iw phy phy0 info' report antennas for the radio device: ... Available Antennas: TX 0x2 RX 0x2 Configured Antennas: TX 0x2 RX 0x2 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: handle failure in Tx vring configVladimir Kondratiev
When configuring Tx vring for new connection, WMI call to the firmware may fail. In this case, need to clean up properly. In particular, need to call cfg80211_del_sta() in case of AP like interface. Perform full "disconnect" procedure for proper clean up Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: fix device ready detectionVladimir Kondratiev
Adjust driver behavior during FW boot. Proper sequence of events after reset and FW download, is as following: - FW prepares mailbox structure and reports IRQ "FW_READY" - driver caches mailbox registers, marks mailbox readiness - FW sends WMI_FW_READY event, ignore it - FW sends WMI_READY event with some data - driver stores relevant data marks FW is operational Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: Fix TSO overflow handlingHamad Kadmany
When Tx ring full is encountered with TSO, printout of "DMA error" was wrongly printed. In addition, in case of Tx ring full return proper error code so that NETDEV_TX_BUSY is returned to network stack in order not to drop the packets and retry transmission of the packets when ring is emptied. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29wil6210: ignore selected WMI eventsVladimir Kondratiev
Some events are ignored for purpose; such events should not be treated as "unhandled events". Replace info message saying "unhandled" with debug one saying "ignore", to reduce dmesg pollution Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add QCA9377 chipset supportBartosz Markowski
Add the hardware name, revision and update the pci_id table. Currently there're two HW ref. designs available I'm aware of, with 1.0.2 and 1.1 chip revisions. I've access and been using the first one so far and this patch cover only it. QCA9377 inherits most of the stuff (e.g. fw interfaces) from QCA61x4 design, so the integration was pretty straightforward. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: reload HT/VHT capabilities on antenna changeRajkumar Manoharan
To reflect configured antenna settings in HT/VHT MCS map, reload the HT/VHT capabilities upon antenna change. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: move static HT/VHT capability setup functionsRajkumar Manoharan
Move HT and VHT capabiltity setup static functions to avoid forward declaration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: fill HT/VHT MCS rateset only for configured chainmaskRajkumar Manoharan
HT/VHT MCS rateset should be filled only for configured chainmask rather that max supported chainmask. Fix that by checking configured chainmask while filling HT/VHT MCS rate map. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove supported chain maskRajkumar Manoharan
Removing supported chainmask fields as it can be always derived from num_rf_chains. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove shadow copy of CE descriptors for source ringRajkumar Manoharan
For the messages from host to target, shadow copy of CE descriptors are maintained in source ring. Before writing actual CE descriptor, first shadow copy is filled and then it is copied to CE address space. To optimize in download path and to reduce d-cache pressure, removing shadow copy of CE descriptors. This will also reduce driver memory consumption by 33KB during on device probing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: cleanup copy engine send completionRajkumar Manoharan
The physical address necessary to unmap DMA ('bufferp') is stored in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id when handling send completion (htc ep id is stored in sk_buff control buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp} are removed from CE send completion. This change is needed before removing the shadow copy of copy engine (CE) descriptors in follow up patch. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: remove send completion validation in diag read/writeRajkumar Manoharan
CE diag window access is serialized (it has to be by design) so there's no way to get a different send completion. so there's no need for post completion validation. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: use local memory instead of shadow descriptor in ce_sendRajkumar Manoharan
Currently to avoid uncached memory access while filling up copy engine descriptors, shadow descriptors are used. This can be optimized further by removing shadow descriptors. To achieve that first shadow ring dependency in ce_send is removed by creating local copy of the descriptor on stack and make a one-shot copy into the "uncached" descriptor. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add fw_stats support to 10.4 firmwareManikanta Pubbisetty
This patch adds support for getting firmware debug stats in 10.4 fw. Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29ath10k: add FW API support to test modeAlan Liu
Add WMI-TLV and FW API support in ath10k testmode. Ath10k can get right wmi command format from UTF image to communicate UTF firmware. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-29mmc: dw_mmc: fix the wrong setting for UHS-DDR50 modeJaehoon Chung
When card is running with DDR mode, dwmmc needs to set DDR_REG bit at UHS_REG register. Before this patch, dwmmc controller doesn't consider this. If this patch is not applied, CRC or other error shoulds be occurred. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-29mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl registerJaehoon Chung
According to DesignWare DoC file, CardThreshold bit should be bit[27:16]. So it's correct to use (0xFFF << 16), not (0x1FFF << 16). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-29mmc: dw_mmc: NULL dereference in error messageDan Carpenter
The "host->dms->ch" pointer is NULL here so we can't use it to print the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-29Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Enable per-event perf_event_attr.inherit setting by config terms, i.e. this becomes possible: $ perf record -e cycles/inherit/ -e instructions/no-inherit/ This affects the default, that can be changed globally using the --no-inherit option. This fine grained control appeared in the eBPF patchkit, but this added flexibility may end up being useful in other scenarios. (Wang Nan) - Setup pager when printing usage and help, we have long lists of options, better use the pager like we do with normal tooling output, i.e. when needed, and including any error messages in the paged output. (Namhyung Kim) - Search for more options when passing args to -h, e.g.: (Arnaldo Carvalho de Melo) $ perf report -h interface Usage: perf report [<options>] --gtk Use the GTK2 interface --stdio Use the stdio interface --tui Use the TUI interface - Fix reading separate debuginfo files based on a build-id, problem found on a Debian system. (Dima Kogan) - Fix endless loop when splitting kallsyms symbols per section for handling kcore files, problem found on a s390x system. (Jiri Olsa) Infrastructure changes: - Prep work for the 'perf stat record' work that will allow generating perf.data files with counting data in addition to the sampling mode we have now (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-29nvme: LightNVM supportMatias Bjørling
The first generation of Open-Channel SSDs is based on NVMe. The NVMe driver is extended with support for the LightNVM command set. Detection is made through PCI IDs. Current supported devices are the qemu nvme simulator and CNEX Labs Westlake SSD. The qemu nvme enables support through vendor specific bits in the namespace identification and the CNEX Labs Westlake SSD implements a LightNVM compatible firmware and is detected using the same method as qemu. After detection, vendor specific codes are used to identify the device and enumerate supported features. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Javier González <jg@lightnvm.io> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29rrpc: Round-robin sector target with cost-based gcMatias Bjørling
This target allows an Open-Channel SSD to be exposed asas a block device. It implements a round-robin approach for sector allocation, together with a greedy cost-based garbage collector. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29gennvm: Generic NVM managerMatias Bjørling
The implementation for Open-Channel SSDs is divided into media management and targets. This patch implements a generic media manager for open-channel SSDs. After a media manager has been initialized, single or multiple targets can be instantiated with the media managed as the backend. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29lightnvm: Support for Open-Channel SSDsMatias Bjørling
Open-channel SSDs are devices that share responsibilities with the host in order to implement and maintain features that typical SSDs keep strictly in firmware. These include (i) the Flash Translation Layer (FTL), (ii) bad block management, and (iii) hardware units such as the flash controller, the interface controller, and large amounts of flash chips. In this way, Open-channels SSDs exposes direct access to their physical flash storage, while keeping a subset of the internal features of SSDs. LightNVM is a specification that gives support to Open-channel SSDs LightNVM allows the host to manage data placement, garbage collection, and parallelism. Device specific responsibilities such as bad block management, FTL extensions to support atomic IOs, or metadata persistence are still handled by the device. The implementation of LightNVM consists of two parts: core and (multiple) targets. The core implements functionality shared across targets. This is initialization, teardown and statistics. The targets implement the interface that exposes physical flash to user-space applications. Examples of such targets include key-value store, object-store, as well as traditional block devices, which can be application-specific. Contributions in this patch from: Javier Gonzalez <jg@lightnvm.io> Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Jesper Madsen <jmad@itu.dk> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-28hwmon: (ina2xx) give precedence to DT over checking for platform data.Marc Titinger
when checking for the value of the shunt resistor. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-28hwmon: (ina2xx) convert driver to using regmapMarc Titinger
Any sysfs "show" read access from the client app will result in reading all registers (8 with ina226). Depending on the host this can limit the best achievable read rate. This changeset allows for individual register accesses through regmap. Tested with BeagleBone Black (Baylibre-ACME) and ina226. Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-10-29cgroup: fix race condition around termination check in css_task_iter_next()Tejun Heo
css_task_iter_next() checked @it->cur_task before grabbing css_set_lock and assumed that the result won't change afterwards; however, tasks could leave the cgroup being iterated terminating the iterator before css_task_lock is acquired. If this happens, css_task_iter_next() tries to calculate the current task from NULL cg_list pointer leading to the following oops. BUG: unable to handle kernel paging request at fffffffffffff7d0 IP: [<ffffffff810d5f22>] css_task_iter_next+0x42/0x80 ... CPU: 4 PID: 6391 Comm: JobQDisp2 Not tainted 4.0.9-22_fbk4_rc3_81616_ge8d9cb6 #1 Hardware name: Quanta Freedom/Winterfell, BIOS F03_3B08 03/04/2014 task: ffff880868e46400 ti: ffff88083404c000 task.ti: ffff88083404c000 RIP: 0010:[<ffffffff810d5f22>] [<ffffffff810d5f22>] css_task_iter_next+0x42/0x80 RSP: 0018:ffff88083404fd28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88083404fd68 RCX: ffff8804697fb8b0 RDX: fffffffffffff7c0 RSI: ffff8803b7dff800 RDI: ffffffff822c0278 RBP: ffff88083404fd38 R08: 0000000000017160 R09: ffff88046f4070c0 R10: ffffffff810d61f7 R11: 0000000000000293 R12: ffff880863bf8400 R13: ffff88046b87fd80 R14: 0000000000000000 R15: ffff88083404fe58 FS: 00007fa0567e2700(0000) GS:ffff88046f900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffff7d0 CR3: 0000000469568000 CR4: 00000000001406e0 Stack: 0000000000000246 0000000000000000 ffff88083404fde8 ffffffff810d6248 ffff88083404fd68 0000000000000000 ffff8803b7dff800 000001ef000001ee 0000000000000000 0000000000000000 ffff880863bf8568 0000000000000000 Call Trace: [<ffffffff810d6248>] cgroup_pidlist_start+0x258/0x550 [<ffffffff810cf66d>] cgroup_seqfile_start+0x1d/0x20 [<ffffffff8121f8ef>] kernfs_seq_start+0x5f/0xa0 [<ffffffff811cab76>] seq_read+0x166/0x380 [<ffffffff812200fd>] kernfs_fop_read+0x11d/0x180 [<ffffffff811a7398>] __vfs_read+0x18/0x50 [<ffffffff811a745d>] vfs_read+0x8d/0x150 [<ffffffff811a756f>] SyS_read+0x4f/0xb0 [<ffffffff818d4772>] system_call_fastpath+0x12/0x17 Fix it by moving the termination condition check inside css_set_lock. @it->cur_task is now cleared after being put and @it->task_pos is tested for termination instead of @it->cset_pos as they indicate the same condition and @it->task_pos is what's being dereferenced. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Calvin Owens <calvinowens@fb.com> Fixes: ed27b9f7a17d ("cgroup: don't hold css_set_rwsem across css task iteration") Acked-by: Zefan Li <lizefan@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-14 12:08:28 +0000