| Age | Commit message (Collapse) | Author |
|---|
|
Document the kernel parameters trusted.dcp_use_otp_key
and trusted.dcp_skip_zk_test for DCP-backed trusted keys.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This covers trusted keys backed by NXP's DCP (Data Co-Processor) chip
found in smaller i.MX SoCs.
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
DCP (Data Co-Processor) is the little brother of NXP's CAAM IP.
Beside of accelerated crypto operations, it also offers support for
hardware-bound keys. Using this feature it is possible to implement a blob
mechanism similar to what CAAM offers. Unlike on CAAM, constructing and
parsing the blob has to happen in software (i.e. the kernel).
The software-based blob format used by DCP trusted keys encrypts
the payload using AES-128-GCM with a freshly generated random key and nonce.
The random key itself is AES-128-ECB encrypted using the DCP unique
or OTP key.
The DCP trusted key blob format is:
/*
* struct dcp_blob_fmt - DCP BLOB format.
*
* @fmt_version: Format version, currently being %1
* @blob_key: Random AES 128 key which is used to encrypt @payload,
* @blob_key itself is encrypted with OTP or UNIQUE device key in
* AES-128-ECB mode by DCP.
* @nonce: Random nonce used for @payload encryption.
* @payload_len: Length of the plain text @payload.
* @payload: The payload itself, encrypted using AES-128-GCM and @blob_key,
* GCM auth tag of size AES_BLOCK_SIZE is attached at the end of it.
*
* The total size of a DCP BLOB is sizeof(struct dcp_blob_fmt) + @payload_len +
* AES_BLOCK_SIZE.
*/
struct dcp_blob_fmt {
__u8 fmt_version;
__u8 blob_key[AES_KEYSIZE_128];
__u8 nonce[AES_KEYSIZE_128];
__le32 payload_len;
__u8 payload[];
} __packed;
By default the unique key is used. It is also possible to use the
OTP key. While the unique key should be unique it is not documented how
this key is derived. Therefore selection the OTP key is supported as
well via the use_otp_key module parameter.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Enabling trusted keys requires at least one trust source implementation
(currently TPM, TEE or CAAM) to be enabled. Currently, this is
done by checking each trust source's config option individually.
This does not scale when more trust sources like the one for DCP
are added, because the condition will get long and hard to read.
Add config HAVE_TRUSTED_KEYS which is set to true by each trust source
once its enabled and adapt the check for having at least one active trust
source to use this option. Whenever a new trust source is added, it now
needs to select HAVE_TRUSTED_KEYS.
Signed-off-by: David Gstir <david@sigma-star.at>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> # for TRUSTED_KEYS_TPM
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
DCP (Data Co-Processor) is able to derive private keys for a fused
random seed, which can be referenced by handle but not accessed by
the CPU. Similarly, DCP is able to store arbitrary keys in four
dedicated key slots located in its secure memory area (internal SRAM).
These keys can be used to perform AES encryption.
Expose these derived keys and key slots through the crypto API via their
handle. The main purpose is to add DCP-backed trusted keys. Other
use cases are possible too (see similar existing paes implementations),
but these should carefully be evaluated as e.g. enabling AF_ALG will
give userspace full access to use keys. In scenarios with untrustworthy
userspace, this will enable en-/decryption oracles.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
System work queues are shared, use a dedicated work queue for G2H
processing to avoid G2H processing getting block behind system tasks.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com
(cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The initialization via drmm_mutex_init can fail, so we need to check the
return code and escalate the failure.
The mutex initialization has been moved after all the other init steps
that can't fail, so we're always guaranteed to have those done and don't
have to check in the cleanup code.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321195512.274210-1-daniele.ceraolospurio@intel.com
(cherry picked from commit b4abeb5545bb3ddcdda3c19067680ad0b2259be4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Zero-length arrays are deprecated and flexible arrays should be
used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
util means the percentage that disk has IO, and theoretically it should
not be greater than 100%. However, there is a gap for rq-based disk:
io_ticks will be updated when rq is allocated, however, before such rq
dispatch to driver, it will not be account as inflight from
blk_mq_start_request() hence diskstats_show()/part_stat_show() will not
update io_ticks. For example:
1) at t0, issue a new IO, rq is allocated, and blk_account_io_start()
update io_ticks;
2) something is wrong with drivers, and the rq can't be dispatched;
3) at t0 + 10s, drivers recovers and rq is dispatched and done, io_ticks
is updated;
Then if user is using "iostat 1" to monitor "util", between t0 - t0+9s,
util will be zero, and between t0+9s - t0+10s, util will be 1000%.
Fix this problem by updating io_ticks from diskstats_show() and
part_stat_show() if there are rq allocated.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509123717.3223892-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, io_ticks is accounted based on sampling, specifically
update_io_ticks() will always account io_ticks by 1 jiffies from
bdev_start_io_acct()/blk_account_io_start(), and the result can be
inaccurate, for example(HZ is 250):
Test script:
fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms
Test result: util is about 90%, while the disk is really idle.
This behaviour is introduced by commit 5b18b5a73760 ("block: delete
part_round_stats and switch to less precise counting"), however, there
was a key point that is missed that this patch also improve performance
a lot:
Before the commit:
part_round_stats:
if (part->stamp != now)
stats |= 1;
part_in_flight()
-> there can be lots of task here in 1 jiffies.
part_round_stats_single()
__part_stat_add()
part->stamp = now;
After the commit:
update_io_ticks:
stamp = part->bd_stamp;
if (time_after(now, stamp))
if (try_cmpxchg())
__part_stat_add()
-> only one task can reach here in 1 jiffies.
Hence in order to account io_ticks precisely, we only need to know if
there are IO inflight at most once in one jiffies. Noted that for
rq-based device, iterating tags should not be used here because
'tags->lock' is grabbed in blk_mq_find_and_get_req(), hence
part_stat_lock_inc/dec() and part_in_flight() is used to trace inflight.
The additional overhead is quite little:
- per cpu add/dec for each IO for rq-based device;
- per cpu sum for each jiffies;
And it's verified by null-blk that there are no performance degration
under heavy IO pressure.
Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509123717.3223892-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So that if caller didn't use plug, for example, __blkdev_direct_IO_simple()
and __blkdev_direct_IO_async(), block layer can still benefit from caching
nsec time in the plug.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509123825.3225207-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The expiry time of a key is unconditionally overwritten during
instantiation, defaulting to turn it permanent. This causes a problem
for DNS resolution as the expiration set by user-space is overwritten to
TIME64_MAX, disabling further DNS updates. Fix this by restoring the
condition that key_set_expiry is only called when the pre-parser sets a
specific expiry.
Fixes: 39299bdd2546 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry")
Signed-off-by: Silvio Gissi <sifonsec@amazon.com>
cc: David Howells <dhowells@redhat.com>
cc: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Delaying key quotas update when key's refcount reaches 0 in key_put() has
been causing some issues in fscrypt testing, specifically in fstest
generic/581. This commit fixes this test flakiness by dealing with the
quotas immediately, and leaving all the other clean-ups to the key garbage
collector.
This is done by moving the updates to the qnkeys and qnbytes fields in
struct key_user from key_gc_unused_keys() into key_put(). Unfortunately,
this also means that we need to switch to the irq-version of the spinlock
that protects these fields and use spin_lock_{irqsave,irqrestore} in all
the code that touches these fields.
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
|
|
We used a per-descriptor SRCU struct in order to not impose a wait with
synchronize_srcu() for descriptor X on read-only operations of
descriptor Y. Now that we no longer call synchronize_srcu() on
descriptor label change but only when releasing descriptor resources, we
can use a single SRCU structure for all GPIO descriptors in a given chip.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507172414.28513-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
So we can also use CLASS(fd_raw, f)(fd) for codepaths where we allow
FMODE_PATH aka O_PATH file descriptors to be used.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:
...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.
CC: stable@vger.kernel.org
Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240508-fox-unpiloted-b97e1535627b@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.
syzbot reported:
general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237
Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff
RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000
RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48
RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad
R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0
R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000
FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358
sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248
sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653
sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783
sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169
sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73
__sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 778d80be5269 ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.
Indeed ip6_dst_idev() can return NULL, and must always be checked.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
ip6_route_output include/net/ip6_route.h:93 [inline]
ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
__sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec36 ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array.
Cc: stable@vger.kernel.org
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368
Signed-off-by: Matthew Mirvish <matthew@mm12.xyz>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit c37ce764cd492f044dcdbb39616298f02b0dbc7f.
RCCL library is currently not treating spatial partitions differently,
hence this change is causing issues. Revert temporarily till RCCL
implementation is ready for spatial partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes
a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path.
Cc: Tim Huang <Tim.Huang@amd.com>
Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The read_actions_logged() and write_actions_logged() helpers called by the
sysctl proc handler seccomp_actions_logged_handler() are already expecting
their sysctl table argument to be read-only. Actually mark the argument
as const in preparation[1] for global constification of the sysctl tables.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/20240423-sysctl-const-handler-v3-11-e0beccb836e2@weissschuh.net/ [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240508171337.work.861-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c53655545141 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
|
|
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
|
|
Introduce the capability to dynamically configure the maximum file
note size for ELF core dumps via sysctl.
Why is this being done?
We have observed that during a crash when there are more than 65k mmaps
in memory, the existing fixed limit on the size of the ELF notes section
becomes a bottleneck. The notes section quickly reaches its capacity,
leading to incomplete memory segment information in the resulting coredump.
This truncation compromises the utility of the coredumps, as crucial
information about the memory state at the time of the crash might be
omitted.
This enhancement removes the previous static limit of 4MB, allowing
system administrators to adjust the size based on system-specific
requirements or constraints.
Eg:
$ sysctl -a | grep core_file_note_size_limit
kernel.core_file_note_size_limit = 4194304
$ sysctl -n kernel.core_file_note_size_limit
4194304
$echo 519304 > /proc/sys/kernel/core_file_note_size_limit
$sysctl -n kernel.core_file_note_size_limit
519304
Attempting to write beyond the ceiling value of 16MB
$echo 17194304 > /proc/sys/kernel/core_file_note_size_limit
bash: echo: write error: Invalid argument
Signed-off-by: Vijay Nag <nagvijay@microsoft.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240506193700.7884-1-apais@linux.microsoft.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Update kernel-parameters doc to describe "pcie_aspm=off" more
accurately (Bjorn Helgaas)
- Restore the parent's (not the child's) ASPM state to the parent
during resume, which fixes a reboot during resume (Kai-Heng Feng)
* tag 'pci-v6.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Restore parent state to parent, child state to child
PCI/ASPM: Clarify that pcie_aspm=off means leave ASPM untouched
|
|
David Howells says:
====================
rxrpc: Miscellaneous fixes (part)
Here some miscellaneous fixes for AF_RXRPC:
(1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
ssthresh when the peer cuts its rwind size.
(2) Only transmit a single ACK for all the DATA packets glued together
into a jumbo packet to reduce the number of ACKs being generated.
====================
Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle
For the first four, we reference the lowest offending subpacket; for the
last three, the highest.
This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.
Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
