| Age | Commit message (Collapse) | Author |
|---|
|
Pull folio conversion updates from Matthew Wilcox:
"Convert much of the page cache to use folios
This stops just short of actually enabling large folios. It converts
everything that I noticed needs to be converted, but there may still
be places I've overlooked which still have page size assumptions.
The big change here is using large entries in the page cache XArray
instead of many small entries. That only affects shmem for now, but
it's a pretty big change for shmem since it changes where memory needs
to be allocated (at split time instead of insertion)"
* tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache: (49 commits)
mm: Use multi-index entries in the page cache
XArray: Add xas_advance()
truncate,shmem: Handle truncates that split large folios
truncate: Convert invalidate_inode_pages2_range to folios
fs: Convert vfs_dedupe_file_range_compare to folios
mm: Remove pagevec_remove_exceptionals()
mm: Convert find_lock_entries() to use a folio_batch
filemap: Return only folios from find_get_entries()
filemap: Convert filemap_get_read_batch() to use a folio_batch
filemap: Convert filemap_read() to use a folio
truncate: Add invalidate_complete_folio2()
truncate: Convert invalidate_inode_pages2_range() to use a folio
truncate: Skip known-truncated indices
truncate,shmem: Add truncate_inode_folio()
shmem: Convert part of shmem_undo_range() to use a folio
mm: Add unmap_mapping_folio()
truncate: Add truncate_cleanup_folio()
filemap: Add filemap_release_folio()
filemap: Use a folio in filemap_page_mkwrite
filemap: Use a folio in filemap_map_pages
...
|
|
If any downstream device can be a wakeup device, do not turn off the
regulators as the device will need them on.
Link: https://lore.kernel.org/r/20220106160332.2143-8-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This Broadcom STB PCIe RC driver has one port and connects directly to one
device, be it a switch or an endpoint. We want to be able to leverage the
recently added mechanism that allocates and turns on/off subdevice
regulators.
All that needs to be done is to put the regulator DT nodes in the bridge
below host and to set the pci_ops methods add_bus and remove_bus.
Note that the pci_subdev_regulators_add_bus() method is wrapped for two
reasons:
1. To achieve link up after the voltage regulators are turned on.
2. If, in the case of an unsuccessful link up, to redirect any PCIe
accesses to subdevices, e.g. the scan for DEV/ID. This redirection
is needed because the Broadcom PCIe HW will issue a CPU abort if such
an access is made when the link is down.
[bhelgaas: fold in
https://lore.kernel.org/r/20220112013100.48029-1-jim2101024@gmail.com]
Link: https://lore.kernel.org/r/20220106160332.2143-7-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add a mechanism to identify standard PCIe regulators in the DT, allocate
them, and turn them on before the rest of the bus is scanned during
pci_host_probe().
The allocated structure that contains the regulators is stored in the port
driver dev.driver_data field. Here is a point-by-point of how and when
this mechanism is activated:
If:
-- PCIe RC driver sets pci_ops {add,remove)_bus to
pci_subdev_regulators_{add,remove}_bus during its probe.
-- There is a DT node "RB" under the host bridge DT node.
-- During the RC driver's pci_host_probe() the add_bus callback
is invoked where (bus->parent && pci_is_root_bus(bus->parent)
is true
Then:
-- A struct subdev_regulators structure will be allocated and
assigned to bus->dev.driver_data.
-- regulator_bulk_{get,enable} will be invoked on &bus->dev
and the former will search for and process any
vpcie{12v,3v3,3v3aux}-supply properties that reside in node "RB".
-- The regulators will be turned off/on for any unbind/bind operations.
-- The regulators will be turned off/on for any suspend/resumes, but
only if the RC driver handles this on its own. This will appear
in a later commit for the pcie-brcmstb.c driver.
The unabridged reason for doing this is as follows. We would like the
Broadcom STB PCIe root complex driver (and others) to be able to turn
off/on regulators[1] that provide power to endpoint[2] devices. Typically,
the drivers of these endpoint devices are stock Linux drivers that are not
aware that these regulator(s) exist and must be turned on for the driver to
be probed. The simple solution of course is to turn these regulators on at
boot and keep them on. However, this solution does not satisfy at least
three of our usage modes:
1. For example, one customer uses multiple PCIe controllers, but wants
the ability to, by script invoking and unbind, turn any or all of them
and their subdevices off to save power, e.g. when in battery mode.
2. Another example is when a watchdog script discovers that an endpoint
device is in an unresponsive state and would like to unbind, power
toggle, and re-bind just the PCIe endpoint and controller.
3. Of course we also want power turned off during suspend mode. However,
some endpoint devices may be able to "wake" during suspend and we need
to recognise this case and veto the nominal act of turning off its
regulator. Such is the case with Wake-on-LAN and Wake-on-WLAN support
where the PCIe endpoint device needs to be kept powered on in order to
receive network packets and wake the system.
In all of these cases it is advantageous for the PCIe controller to govern
the turning off/on the regulators needed by the endpoint device. The first
two cases can be done by simply unbinding and binding the PCIe controller,
if the controller has control of these regulators.
[1] These regulators typically govern the actual power supply to the
endpoint chip. Sometimes they may be the official PCIe socket
power -- such as 3.3v or aux-3.3v. Sometimes they are truly
the regulator(s) that supply power to the EP chip.
[2] The 99% configuration of our boards is a single endpoint device
attached to the PCIe controller. I use the term endpoint but it could
possibly mean a switch as well.
Link: https://lore.kernel.org/r/20220106160332.2143-6-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
We need to take some code in brcm_pcie_setup() and put it in a new function
brcm_pcie_linkup(). In future commits the brcm_pcie_linkup() function will
be called indirectly by pci_host_probe() as opposed to the host driver
invoking it directly.
Some code that was executed after the PCIe linkup is now placed so that it
executes prior to linkup, since this code has to run prior to the
invocation of pci_host_probe().
Link: https://lore.kernel.org/r/20220106160332.2143-5-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be
added to the Linux PCI subsystem that will allocate and turn on/off
regulators. These are standard regulators -- vpcie12v, vpcie3v3, and
vpcie3v3aux -- placed in the DT in the bridge node under the host bridge
device.
The use of a regulator property in the PCIe EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at
https://github.com/devicetree-org/dt-schema/pull/63
Link: https://lore.kernel.org/r/20220106160332.2143-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The "pcie" and "msi" interrupts were given the same interrupt when they are
actually different. Interrupt-map only had the INTA entry; add the INTB,
INTC, and INTD entries.
Link: https://lore.kernel.org/r/20220106160332.2143-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Do at least a dev_err() on some calls to reset_control_rearm() and
brcm_phy_stop(). In some cases it may not make sense to return this error
value "above" as doing so will cause more trouble than is warranted.
Link: https://lore.kernel.org/r/20220106160332.2143-2-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Define the legacy MSI interrupt bitmask as well as the non-legacy interrupt
bitmask using GENMASK and then use them in brcm_msi_set_regs() in place of
__GENMASK().
Link: https://lore.kernel.org/r/20211122190459.3189616-1-f.fainelli@gmail.com
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
The 'used' field of 'struct brcm_msi' is used as a bitmap. Declare it with
DECLARE_BITMAP() and adjust users accordingly.
This fixes a harmless Coverity warning about array vs singleton usage.
This bitmap can be used for either legacy or MSI interrupts, which require
a size of BRCM_INT_PCI_MSI_LEGACY_NR or BRCM_INT_PCI_MSI_NR respectively.
Add a BUILD_BUG_ON() to ensure it is large enough.
Suggested-by: Krzysztof Wilczynski <kw@linux.com>
Addresses-Coverity: "Out-of-bounds access (ARRAY_VS_SINGLETON)"
Link: https://lore.kernel.org/r/e6d9da2112aab2939d1507b90962d07bfd735b4c.1636273671.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX/License update from Greg KH:
"Here is a single change that fixes up the description of the 'LGPL-2.1
or later' identifiers so that the tools properly acknowledge that this
is a valid license.
This change has been in linux-next for weeks with no reported problems"
* tag 'spdx-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.17-rc1.
Nothing major in here, just lots of little updates and cleanups. These
include:
- some USB header fixes picked from Ingo's header-splitup work
- more USB4/Thunderbolt hardware support added
- USB gadget driver updates and additions
- USB typec additions (includes some acpi changes, which were acked
by the ACPI maintainer)
- core USB fixes as found by syzbot that were too late for 5.16-final
- USB dwc3 driver updates
- USB dwc2 driver updates
- platform_get_irq() conversions of some USB drivers
- other minor USB driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
docs: ABI: fixed formatting in configfs-usb-gadget-uac2
usb: gadget: u_audio: Subdevice 0 for capture ctls
usb: gadget: u_audio: fix calculations for small bInterval
usb: dwc2: gadget: initialize max_speed from params
usb: dwc2: do not gate off the hardware if it does not support clock gating
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
USB: common: debug: add needed kernel.h include
headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
headers/prep: usb: gadget: Fix namespace collision
USB: core: Fix bug in resuming hub's handling of wakeup requests
USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
usb: gadget: clear related members when goto fail
usb: gadget: don't release an existing dev->buf
usb: dwc2: Simplify a bitmap declaration
usb: Remove usb_for_each_port()
usb: typec: port-mapper: Convert to the component framework
usb: Link the ports to the connectors they are attached to
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 5.17-rc1.
Nothing major in here, just lots of good updates and fixes, including:
- more tty core cleanups from Jiri as well as mxser driver cleanups.
This is the majority of the core diffstat
- tty documentation updates from Jiri
- platform_get_irq() updates
- various serial driver updates for new features and hardware
- fifo usage for 8250 console, reducing cpu load a lot
- LED fix for keyboards, long-time bugfix that went through many
revisions
- minor cleanups
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
serial: core: Keep mctrl register state and cached copy in sync
serial: stm32: correct loop for dma error handling
serial: stm32: fix flow control transfer in DMA mode
serial: stm32: rework TX DMA state condition
serial: stm32: move tx dma terminate DMA to shutdown
serial: pl011: Drop redundant DTR/RTS preservation on close/open
serial: pl011: Drop CR register reset on set_termios
serial: pl010: Drop CR register reset on set_termios
serial: liteuart: fix MODULE_ALIAS
serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
tty: goldfish: Use platform_get_irq() to get the interrupt
serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
tty: serial: meson: Drop the legacy compatible strings and clock code
serial: pmac_zilog: Use platform_get_irq() to get the interrupt
serial: bcm63xx: Use platform_get_irq() to get the interrupt
serial: ar933x: Use platform_get_irq() to get the interrupt
serial: vt8500: Use platform_get_irq() to get the interrupt
serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
serial: pxa: Use platform_get_irq() to get the interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big set of staging driver updates for 5.17-rc1
Nothing major in here at all, just lots and lots of tiny cleanups.
Overall more code was removed than added, which is always nice, but
not a huge change.
Majority of the work happened in the r8188eu driver, that had hundreds
of cleanups happen on it, but almost all other staging drivers had
cleanups as well. No new functionality was added, cleanups only.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (308 commits)
staging: r8188eu: rename camelcase variable uintPeerChannel
staging: r8188eu: make BW20_24G_Diff a 1-D array
staging: r8188eu: make OFDM_24G_Diff a 1-D array
staging: r8188eu: BW40_24G_Diff is set but not used
staging: r8188eu: CCK_24G_Diff is set but not used
staging: r8188eu: make Index24G_BW40_Base a 1-D array
staging: r8188eu: make Index24G_CCK_Base a 1-D array
staging: r8188eu: rfPath is always 0
staging: r8188eu: remove unneeded parameter from rtl8188e_SetHalODMVar
staging: pi433: add comment to rx_lock mutex definition
staging: pi433: fix frequency deviation check
staging: vc04_services: rename BM2835 to BCM2835 in headers comments
staging: vc04_services: rename string literal containing bm2835_* to bcm2835*_
staging: vc04_services: rename variables containing bm2835_* to bcm2835_*
staging: vc04_services: rename functions containing bm2835_* to bcm2835_*
staging: vc04_services: rename structures bm2835_mmal_dev and bm2835_mmal_v4l2_ctrl
staging: greybus: audio: Check null pointer
staging: r8188eu: add spaces around P2P_AP_P2P_CH_SWITCH_PROCESS_WK
staging: r8188eu: turbo scan is always off for r8188eu
staging: r8188eu: cmd_issued_cnt is set but not used
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
|
|
Use the new EXPORT_RUNTIME_DEV_PM_OPS() macro. It allows the underlying
dev_pm_ops struct as well as the suspend/resume callbacks to be detected
as dead code in the case where CONFIG_PM is disabled, without having to
wrap everything inside #ifdef CONFIG_PM guards.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Similar to EXPORT[_GPL]_SIMPLE_DEV_PM_OPS, but for users with runtime-PM
suspend/resume callbacks.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A lot of drivers create a dev_pm_ops struct with the system sleep
suspend/resume callbacks set to pm_runtime_force_suspend() and
pm_runtime_force_resume().
These drivers can now use the DEFINE_RUNTIME_DEV_PM_OPS() macro, which
will use pm_runtime_force_{suspend,resume}() as the system sleep
callbacks, while having the same dead code removal characteristic that
is already provided by DEFINE_SIMPLE_DEV_PM_OPS().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
These macros are defined conditionally, according to CONFIG_PM:
- if CONFIG_PM is enabled, these macros resolve to
DEFINE_SIMPLE_DEV_PM_OPS(), and the dev_pm_ops symbol will be
exported.
- if CONFIG_PM is disabled, these macros will result in a dummy static
dev_pm_ops to be created with the __maybe_unused flag. The dev_pm_ops
will then be discarded by the compiler, along with the provided
callback functions if they are not used anywhere else.
In the second case, the symbol is not exported, which should be
perfectly fine - users of the symbol should all use the pm_ptr() or
pm_sleep_ptr() macro, so the dev_pm_ops marked as "extern" in the
client's code will never be accessed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Keep this macro in line with the other ones. This makes it possible to
use them in the cases where the underlying dev_pm_ops structure is
exported.
Restore the "static" qualifier in the two drivers where the
DEFINE_SIMPLE_DEV_PM_OPS macro was used.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep, which is very likely to be a
mistake, as a system sleep can be triggered while a given device is
already PM-suspended, which would cause the suspend callback to be
called twice.
The amount of users of UNIVERSAL_DEV_PM_OPS() is also tiny (16
occurences) compared to the number of places where
SET_SYSTEM_SLEEP_PM_OPS() is used with pm_runtime_force_suspend() and
pm_runtime_force_resume(), which makes me think that none of these cases
are actually valid.
As the new macro DEFINE_UNIVERSAL_DEV_PM_OPS() which was introduced to
replace UNIVERSAL_DEV_PM_OPS() is currently unused, remove it before
someone starts to use it in yet another invalid case.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
|
|
Commit a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.
Fixes: a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to output")
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
output of dev_of_node() is already assigned to "np" variable in
ktd2692_parse_dt(). Use "np" variable to check if OF node is NULL
instead of calling dev_of_node() again.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Call graph:
--> sso_gpio_gc_init()
--> devm_gpiochip_add_data
--> devm_gpiochip_add_data_with_key
--> gpiochip_add_data_with_key()
--> of_gpio_dev_init()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove assignment here.
For the details one may look into the of_gpio_dev_init() implementation.
Call graph:
--> tca6507_probe_gpios()
--> gpiochip_add_data()
--> gpiochip_add_data_with_key()
--> of_gpio_dev_init()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
The board file using this driver has been deleted and the
FSG3 LEDs can be modeled using a system controller and some
register bit LEDs in the device tree so this driver is no
longer needed.
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
During code review this unused variable was found. Remove it.
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Replace moonlight with indicator in mt6360 example to prevent the below
build error:
Error: Documentation/devicetree/bindings/leds/leds-mt6360.example.dts:114.24-25
syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385:
Documentation/devicetree/bindings/leds/leds-mt6360.example.dt.yaml]
Error 1
Link: https://lore.kernel.org/lkml/CAL_JsqJRMVE163LaHTbtFARc4f_qg33bfQx+sD3ukce_xQF+gA@mail.gmail.com/
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Gene Chen <gene_chen@richtek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Update a newly created device's fwnode and of_node pointers using the
recently added device_set_node helper. This keeps some firmware node
specifics out of led-class and should help tracking future changes
regarding device firmware node updates.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes at si2157 tuning logic
- a warning fix on atomisp when used with clang
* tag 'media/v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: si2157: add support for DVB-C Annex C
media: si2157: fix bandwidth stored in dev
media: si2157: fix 6MHz & 6.1MHz bandwidth setting
media: atomisp: Do not define input_system_cfg2400_t twice
|
|
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
moonlight LED.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
drivers/acpi/acpi_pcc.c:34:22: warning: symbol 'pcc_ctx' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fixes and improvements to dm btree and dm space map code in
persistent-data library used by thinp and cache.
- Update DM integrity to use struct_group() to zero struct
journal_sector.
- Update DM sysfs to use default_groups in kobj_type.
* tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm sysfs: use default_groups in kobj_type
dm integrity: Use struct_group() to zero struct journal_sector
dm space map common: add bounds check to sm_ll_lookup_bitmap()
dm btree: add a defensive bounds check to insert_at()
dm btree remove: change a bunch of BUG_ON() calls to proper errors
dm btree spine: eliminate duplicate le32_to_cpu() in node_check()
dm btree spine: remove extra node_check function declaration
|
|
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
|
|
Pull block updates from Jens Axboe:
- Unify where the struct request handling code is located in the blk-mq
code (Christoph)
- Header cleanups (Christoph)
- Clean up the io_context handling code (Christoph, me)
- Get rid of ->rq_disk in struct request (Christoph)
- Error handling fix for add_disk() (Christoph)
- request allocation cleanusp (Christoph)
- Documentation updates (Eric, Matthew)
- Remove trivial crypto unregister helper (Eric)
- Reduce shared tag overhead (John)
- Reduce poll_stats memory overhead (me)
- Known indirect function call for dio (me)
- Use atomic references for struct request (me)
- Support request list issue for block and NVMe (me)
- Improve queue dispatch pinning (Ming)
- Improve the direct list issue code (Keith)
- BFQ improvements (Jan)
- Direct completion helper and use it in mmc block (Sebastian)
- Use raw spinlock for the blktrace code (Wander)
- fsync error handling fix (Ye)
- Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me)
* tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits)
MAINTAINERS: add entries for block layer documentation
docs: block: remove queue-sysfs.rst
docs: sysfs-block: document virt_boundary_mask
docs: sysfs-block: document stable_writes
docs: sysfs-block: fill in missing documentation from queue-sysfs.rst
docs: sysfs-block: add contact for nomerges
docs: sysfs-block: sort alphabetically
docs: sysfs-block: move to stable directory
block: don't protect submit_bio_checks by q_usage_counter
block: fix old-style declaration
nvme-pci: fix queue_rqs list splitting
block: introduce rq_list_move
block: introduce rq_list_for_each_safe macro
block: move rq_list macros to blk-mq.h
block: drop needless assignment in set_task_ioprio()
block: remove unnecessary trailing '\'
bio.h: fix kernel-doc warnings
block: check minor range in device_add_disk()
block: use "unsigned long" for blk_validate_block_size().
block: fix error unwinding in device_add_disk
...
|
|
Pull io_uring updates from Jens Axboe:
- Support for prioritized work completions (Hao)
- Simplification of reissue (Pavel)
- Add support for CQE skip (Pavel)
- Memory leak fix going to 5.15-stable (Pavel)
- Re-write of internal poll. This both cleans up that code, and gets us
ready to fix the POLLFREE issue (Pavel)
- Various cleanups (GuoYong, Pavel, Hao)
* tag 'for-5.17/io_uring-2022-01-11' of git://git.kernel.dk/linux-block: (31 commits)
io_uring: fix not released cached task refs
io_uring: remove redundant tab space
io_uring: remove unused function parameter
io_uring: use completion batching for poll rem/upd
io_uring: single shot poll removal optimisation
io_uring: poll rework
io_uring: kill poll linking optimisation
io_uring: move common poll bits
io_uring: refactor poll update
io_uring: remove double poll on poll update
io_uring: code clean for some ctx usage
io_uring: batch completion in prior_task_list
io_uring: split io_req_complete_post() and add a helper
io_uring: add helper for task work execution code
io_uring: add a priority tw list for irq completion work
io-wq: add helper to merge two wq_lists
io_uring: reuse io_req_task_complete for timeouts
io_uring: tweak iopoll CQE_SKIP event counting
io_uring: simplify selected buf handling
io_uring: move up io_put_kbuf() and io_put_rw_kbuf()
...
|
|
* Add missed call prestera_router_fini in prestera_switch_fini
* Add prestera_router_hw_fini, which verify lists are empty
Fixes: 69204174cc5c ("net: marvell: prestera: Add prestera router infra")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220111011129.5457-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* Reverse xmas tree variables order
* User friendly messages on error paths
* Refactor __prestera_inetaddr_event to use early return
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220111011051.4941-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* Use refcount, instead of uint
* Increment/decrement recount inside get/put
* Fix error path in __prestera_vr_create. Remove unnecessary kfree.
* Make __prestera_vr_destroy symmetric to "create"
Fixes: bca5859bc6c6 ("net: marvell: prestera: add hardware router objects accounting")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220111011014.4418-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Field "aborted" was added in
69204174cc5c ("net: marvell: prestera: Add prestera router infra").
It will not be used. So remove.
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220111010826.3779-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- refactor the dma-direct coherent allocator
- turn an macro into an inline in scatterlist.h (Logan Gunthorpe)
* tag 'dma-mapping-5.17' of git://git.infradead.org/users/hch/dma-mapping:
lib/scatterlist: cleanup macros into static inline functions
dma-direct: add a dma_direct_use_pool helper
dma-direct: factor the swiotlb code out of __dma_direct_alloc_pages
dma-direct: drop two CONFIG_DMA_RESTRICTED_POOL conditionals
dma-direct: warn if there is no pool for force unencrypted allocations
dma-direct: fail allocations that can't be made coherent
dma-direct: refactor the !coherent checks in dma_direct_alloc
dma-direct: factor out a helper for DMA_ATTR_NO_KERNEL_MAPPING allocations
dma-direct: clean up the remapping checks in dma_direct_alloc
dma-direct: always leak memory that can't be re-encrypted
dma-direct: don't call dma_set_decrypted for remapped allocations
dma-direct: factor out dma_set_{de,en}crypted helpers
|
|
This patch changes MetricExpr to be written out in the same case. This
enables events in metrics to use modifiers like 'G' which currently
yield parse errors when made lower case. To keep tests passing the
literal #smt_on is compared in a non-case sensitive way - #SMT_on is
present in at least SkylakeX metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211126071305.3733878-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Useful for diagnosing problems with metrics.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-1-irogers@google.com
[ Fixed up perf_cpu conflict, i.e. we need to append ".cpu" to cpu__max_present_cpu() result ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While I was auditing the code in xfs_repair that adds feature bits to
existing V5 filesystems, I decided to have a look at how online fsck
handles feature bits, and I found a few problems:
1) ATTR2 is added to the primary super when an xattr is set to a file,
but that isn't consistently propagated to secondary supers. This isn't
a corruption, merely a discrepancy that repair will fix if it ever has
to restore the primary from a secondary. Hence, if we find a mismatch
on a secondary, this is a preen condition, not a corruption.
2) There are more compat and ro_compat features now than there used to
be, but we mask off the newer features from testing. This means we
ignore inconsistencies in the INOBTCOUNT and BIGTIME features, which is
wrong. Get rid of the masking and compare directly.
3) NEEDSREPAIR, when set on a secondary, is ignored by everyone. Hence
a mismatch here should also be flagged for preening, and online repair
should clear the flag. Right now we ignore it due to (2).
4) log_incompat features are ephemeral, since we can clear the feature
bit as soon as the log no longer contains live records for a particular
log feature. As such, the only copy we care about is the one in the
primary super. If we find any bits set in the secondary super, we
should flag that for preening, and clear the bits if the user elects to
repair it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Following Documentation/ABI/stable/sysfs-devices-system-cpu the
/sys/devices/system/cpu/cpuX/topology/core_cpus is deprecated in favor
of thread_siblings, so probe thread_siblings before falling back on
core_cpus.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211124001231.3277836-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
strtoull can only read a 64-bit bitmap. On an AMD EPYC core_cpus may look
like:
00000000,00000000,00000000,00000001,00000000,00000000,00000000,00000001
and so the sibling wasn't spotted. Fix by writing a simple hweight string
parser.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211124001231.3277836-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A common problem is confusing CPU map indices with the CPU, by wrapping
the CPU with a struct then this is avoided. This approach is similar to
atomic_t.
Committer notes:
To make it build with BUILD_BPF_SKEL=1 these files needed the
conversions to 'struct perf_cpu' usage:
tools/perf/util/bpf_counter.c
tools/perf/util/bpf_counter_cgroup.c
tools/perf/util/bpf_ftrace.c
Also perf_env__get_cpu() was removed back in "perf cpumap: Switch
cpu_map__build_map to cpu function".
Additionally these needed to be fixed for the ARM builds to complete:
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/pmu.c
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
