summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-22sctp: add probe_interval in sysctl and sock/asoc/transportXin Long
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'. 'n' is the interval for PLPMTUD probe timer in milliseconds, and it can't be less than 5000 if it's not 0. All asoc/transport's PLPMTUD in a new socket will be enabled by default. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22sctp: add pad chunk and its make function and event tableXin Long
This chunk is defined in rfc4820#section-3, and used to pad an SCTP packet. The receiver must discard this chunk and continue processing the rest of the chunks in the packet. Add it now, as it will be bundled with a heartbeat chunk to probe pmtu in the following patches. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22module: limit enabling module.sig_enforceMimi Zohar
Irrespective as to whether CONFIG_MODULE_SIG is configured, specifying "module.sig_enforce=1" on the boot command line sets "sig_enforce". Only allow "sig_enforce" to be set when CONFIG_MODULE_SIG is configured. This patch makes the presence of /sys/module/module/parameters/sig_enforce dependent on CONFIG_MODULE_SIG=y. Fixes: fda784e50aac ("module: export module signature enforcement status") Reported-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-22Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTRNick Desaulniers
We don't want compiler instrumentation to touch noinstr functions, which are annotated with the no_profile_instrument_function function attribute. Add a Kconfig test for this and make GCOV depend on it, and in the future, PGO. If an architecture is using noinstr, it should denote that via this Kconfig value. That makes Kconfigs that depend on noinstr able to express dependencies in an architecturally agnostic way. Cc: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/lkml/YMTn9yjuemKFLbws@hirez.programming.kicks-ass.net/ Link: https://lore.kernel.org/lkml/YMcssV%2Fn5IBGv4f0@hirez.programming.kicks-ass.net/ Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210621231822.2848305-4-ndesaulniers@google.com
2021-06-22compiler_attributes.h: cleanups for GCC 4.9+Nick Desaulniers
Since commit 6ec4476ac825 ("Raise gcc version requirement to 4.9") we no longer support building the kernel with GCC 4.8; drop the preprocess checks for __GNUC_MINOR__ version. It's implied that if __GNUC_MAJOR__ is 4, then the only supported version of __GNUC_MINOR__ left is 9. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210621231822.2848305-3-ndesaulniers@google.com
2021-06-22compiler_attributes.h: define __no_profile, add to noinstrNick Desaulniers
noinstr implies that we would like the compiler to avoid instrumenting a function. Add support for the compiler attribute no_profile_instrument_function to compiler_attributes.h, then add __no_profile to the definition of noinstr. Link: https://lore.kernel.org/lkml/20210614162018.GD68749@worktop.programming.kicks-ass.net/ Link: https://reviews.llvm.org/D104257 Link: https://reviews.llvm.org/D104475 Link: https://reviews.llvm.org/D104658 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80223 Reviewed-by: Fangrui Song <maskray@google.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210621231822.2848305-2-ndesaulniers@google.com
2021-06-22btrfs: remove unused btrfs_fs_info::total_pinnedNikolay Borisov
This got added 14 years ago in 324ae4df00fd ("Btrfs: Add block group pinned accounting back") but it was not ever used. Subsequently its usage got gradually removed in 8790d502e440 ("Btrfs: Add support for mirroring across drives") and 11833d66be94 ("Btrfs: improve async block group caching"). Let's remove it for good! Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-22net: marvell: return csum computation result from mvneta_rx_csum/mvpp2_rx_csumLorenzo Bianconi
This is a preliminary patch to add hw csum hint support to mvneta/mvpp2 xdp implementation Tested-by: Matteo Croce <mcroce@linux.microsoft.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge branch 'tc-testing-dnat-tuple-collision'David S. Miller
Marcelo Ricardo Leitner says: ==================== tc-testing: add test for ct DNAT tuple collision That was fixed in 13c62f5371e3 ("net/sched: act_ct: handle DNAT tuple collision"). For that, it requires that tdc is able to send diverse packets with scapy, which is then done on the 2nd patch of this series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22tc-testing: add test for ct DNAT tuple collisionMarcelo Ricardo Leitner
When this test fails, /proc/net/nf_conntrack gets only 1 entry: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 When it works, it gets 2 entries: ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.20 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=58203 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 ipv4 2 tcp 6 119 SYN_SENT src=10.0.0.10 dst=10.0.0.10 sport=5000 dport=10 [UNREPLIED] src=20.0.0.1 dst=10.0.0.10 sport=10 dport=5000 mark=0 secctx=system_u:object_r:unlabeled_t:s0 zone=0 use=2 The missing entry is because the 2nd packet hits a tuple collusion and the conntrack entry doesn't get allocated. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22tc-testing: add support for sending various scapy packetsMarcelo Ricardo Leitner
It can be worth sending different scapy packets on a given test, as in the last patch of this series. For that, lets listify the scapy attribute and simply iterate over it. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22tc-testing: fix list handlingMarcelo Ricardo Leitner
python lists don't have an 'add' method, but 'append'. Fixes: 14e5175e9e04 ("tc-testing: introduce scapyPlugin for basic traffic") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: ti: am65-cpsw-nuss: Fix crash when changing number of TX queuesVignesh Raghavendra
When changing number of TX queues using ethtool: # ethtool -L eth0 tx 1 [ 135.301047] Unable to handle kernel paging request at virtual address 00000000af5d0000 [...] [ 135.525128] Call trace: [ 135.525142] dma_release_from_dev_coherent+0x2c/0xb0 [ 135.525148] dma_free_attrs+0x54/0xe0 [ 135.525156] k3_cppi_desc_pool_destroy+0x50/0xa0 [ 135.525164] am65_cpsw_nuss_remove_tx_chns+0x88/0xdc [ 135.525171] am65_cpsw_set_channels+0x3c/0x70 [...] This is because k3_cppi_desc_pool_destroy() which is called after k3_udma_glue_release_tx_chn() in am65_cpsw_nuss_remove_tx_chns() references struct device that is unregistered at the end of k3_udma_glue_release_tx_chn() Therefore the right order is to call k3_cppi_desc_pool_destroy() and destroy desc pool before calling k3_udma_glue_release_tx_chn(). Fix this throughout the driver. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22MAINTAINERS: network: add entry for WWANLoic Poulain
This patch adds maintainer info for drivers/net/wwan subdir, including WWAN core and drivers. Adding Sergey and myself as maintainers and Johannes as reviewer. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22openvswitch: add trace pointsAaron Conole
This makes openvswitch module use the event tracing framework to log the upcall interface and action execution pipeline. When using openvswitch as the packet forwarding engine, some types of debugging are made possible simply by using the ovs-vswitchd's ofproto/trace command. However, such a command has some limitations: 1. When trying to trace packets that go through the CT action, the state of the packet can't be determined, and probably would be potentially wrong. 2. Deducing problem packets can sometimes be difficult as well even if many of the flows are known 3. It's possible to use the openvswitch module even without the ovs-vswitchd (although, not common use). Introduce the event tracing points here to make it possible for working through these problems in kernel space. The style is copied from the mac80211 driver-trace / trace code for consistency - this creates some checkpatch splats, but the official 'guide' for adding tracepoints, as well as the existing examples all add the same splats so it seems acceptable. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22stmmac: dwmac-loongson: fix uninitialized variable in loongson_dwmac_probe()Dan Carpenter
The "mdio" variable is never set to false. Also it should be a bool type instead of int. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge branch 'ethtool-eeprom'David S. Miller
Ido Schimmel says: ==================== ethtool: Module EEPROM API improvements This patchset contains various improvements to recently introduced module EEPROM netlink API. Noticed these while adding module EEPROM write support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Validate module EEPROM offset as part of policyIdo Schimmel
Validate the offset to read from module EEPROM as part of the netlink policy and remove the corresponding check from the code. This also makes it possible to query the offset range from user space: $ genl ctrl policy name ethtool ... ID: 0x14 policy[32]:attr[2]: type=U32 range:[0,255] ... Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Validate module EEPROM length as part of policyIdo Schimmel
Validate the number of bytes to read from the module EEPROM as part of the netlink policy and remove the corresponding check from the code. This also makes it possible to query the length range from user space: $ genl ctrl policy name ethtool ... ID: 0x14 policy[32]:attr[3]: type=U32 range:[1,128] ... Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Use kernel data types for internal EEPROM structIdo Schimmel
The struct is not visible to user space and therefore should not use the user visible data types. Instead, use internal data types like other structures in the file. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Document behavior when module EEPROM bank attribute is omittedIdo Schimmel
The kernel assumes bank 0 when 'ETHTOOL_MSG_MODULE_EEPROM_GET' is sent without 'ETHTOOL_A_MODULE_EEPROM_BANK'. Document it as part of the interface documentation. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Decrease size of module EEPROM get policy arrayIdo Schimmel
The 'ETHTOOL_A_MODULE_EEPROM_DATA' attribute is not part of the get request. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Document correct attribute typeIdo Schimmel
'ETHTOOL_A_MODULE_EEPROM_DATA' is a binary attribute, not a nested one. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ethtool: Use correct command name in titleIdo Schimmel
The command is called 'ETHTOOL_MSG_MODULE_EEPROM_GET', not 'ETHTOOL_MSG_MODULE_EEPROM'. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22bridge: cfm: remove redundant returngushengxian
Return statements are not needed in Void function. Signed-off-by: gushengxian <gushengxian@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: broadcom: bcm4908_enet: reset DMA rings sw indexes properlyRafał Miłecki
Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not enough as it's called during device probe only. Driver resets DMA on every .ndo_open callback and it's required to reset indexes then. This fixes inconsistent rings state and stalled traffic after interface down & up sequence. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22drm/kmb: Fix error return code in kmb_hw_init()Zhen Lei
When the call to platform_get_irq() to obtain the IRQ of the lcd fails, the returned error code should be propagated. However, we currently do not explicitly assign this error code to 'ret'. As a result, 0 was incorrectly returned. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210513134639.6541-1-thunder.leizhen@huawei.com
2021-06-22net/ipv4: swap flow ports when validating sourceMiao Wang
When doing source address validation, the flowi4 struct used for fib_lookup should be in the reverse direction to the given skb. fl4_dport and fl4_sport returned by fib4_rules_early_flow_dissect should thus be swapped. Fixes: 5a847a6e1477 ("net/ipv4: Initialize proto and ports in flow struct") Signed-off-by: Miao Wang <shankerwangmiao@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22bonding: avoid adding slave device with IFF_MASTER flagDi Zhu
The following steps will definitely cause the kernel to crash: ip link add vrf1 type vrf table 1 modprobe bonding.ko max_bonds=1 echo "+vrf1" >/sys/class/net/bond0/bonding/slaves rmmod bonding The root cause is that: When the VRF is added to the slave device, it will fail, and some cleaning work will be done. because VRF device has IFF_MASTER flag, cleanup process will not clear the IFF_BONDING flag. Then, when we unload the bonding module, unregister_netdevice_notifier() will treat the VRF device as a bond master device and treat netdev_priv() as struct bonding{} which actually is struct net_vrf{}. By analyzing the processing logic of bond_enslave(), it seems that it is not allowed to add the slave device with the IFF_MASTER flag, so we need to add a code check for this situation. Signed-off-by: Di Zhu <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22ip6_tunnel: fix GRE6 segmentationJakub Kicinski
Commit 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support") moved assiging inner_ipproto down from ipxip6_tnl_xmit() to its callee ip6_tnl_xmit(). The latter is also used by GRE. Since commit 38720352412a ("gre: Use inner_proto to obtain inner header protocol") GRE had been depending on skb->inner_protocol during segmentation. It sets it in gre_build_header() and reads it in gre_gso_segment(). Changes to ip6_tnl_xmit() overwrite the protocol, resulting in GSO skbs getting dropped. Note that inner_protocol is a union with inner_ipproto, GRE uses the former while the change switched it to the latter (always setting it to just IPPROTO_GRE). Restore the original location of skb_set_inner_ipproto(), it is unclear why it was moved in the first place. Fixes: 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge branch 'mptcp-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Fixes for v5.13 Here are two MPTCP fixes from Paolo. Patch 1 fixes some possible connect-time race conditions with MPTCP-level connection state changes. Patch 2 deletes a duplicate function declaration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22mptcp: drop duplicate mptcp_setsockopt() declarationPaolo Abeni
commit 7896248983ef ("mptcp: add skeleton to sync msk socket options to subflows") introduced a duplicate declaration of mptcp_setsockopt(), just drop it. Reported-by: Florian Westphal <fw@strlen.de> Fixes: 7896248983ef ("mptcp: add skeleton to sync msk socket options to subflows") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22mptcp: avoid race on msk state changesPaolo Abeni
The msk socket state is currently updated in a few spots without owning the msk socket lock itself. Some of such operations are safe, as they happens before exposing the msk socket to user-space and can't race with other changes. A couple of them, at connect time, can actually race with close() or shutdown(), leaving breaking the socket state machine. This change addresses the issue moving such update under the msk socket lock with the usual: <acquire spinlock> <check sk lock onwers> <ev defer to release_cb> scheme. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56 Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Fixes: c3c123d16c0e ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22hv_netvsc: Avoid field-overflowing memcpy()Kees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Add flexible array to represent start of buf_info, improving readability and avoid future warning where memcpy() thinks it is writing past the end of the structure. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: dsa: b53: Create default VLAN entry explicitlyFlorian Fainelli
In case CONFIG_VLAN_8021Q is not set, there will be no call down to the b53 driver to ensure that the default PVID VLAN entry will be configured with the appropriate untagged attribute towards the CPU port. We were implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us, instead make it explicit. Reported-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22octeontx2-af: Avoid field-overflowing memcpy()Kees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. To avoid having memcpy() think a u64 "prof" is being written beyond, adjust the prof member type by adding struct nix_bandprof_s to the union to match the other structs. This silences the following future warning: In file included from ./include/linux/string.h:253, from ./include/linux/bitmap.h:10, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/cpumask.h:5, from ./arch/x86/include/asm/msr.h:11, from ./arch/x86/include/asm/processor.h:22, from ./arch/x86/include/asm/timex.h:5, from ./include/linux/timex.h:65, from ./include/linux/time32.h:13, from ./include/linux/time.h:60, from ./include/linux/stat.h:19, from ./include/linux/module.h:13, from drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c:11: In function '__fortify_memcpy_chk', inlined from '__fortify_memcpy' at ./include/linux/fortify-string.h:310:2, inlined from 'rvu_nix_blk_aq_enq_inst' at drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c:910:5: ./include/linux/fortify-string.h:268:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); please use struct_group() [-Wattribute-warning] 268 | __write_overflow_field(); | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c: ... else if (req->ctype == NIX_AQ_CTYPE_BANDPROF) memcpy(&rsp->prof, ctx, sizeof(struct nix_bandprof_s)); ... Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Subbaraya Sundeep<sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22bpf: Fix integer overflow in argument calculation for bpf_map_area_allocBui Quang Minh
In 32-bit architecture, the result of sizeof() is a 32-bit integer so the expression becomes the multiplication between 2 32-bit integer which can potentially leads to integer overflow. As a result, bpf_map_area_alloc() allocates less memory than needed. Fix this by casting 1 operand to u64. Fixes: 0d2c4f964050 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps") Fixes: 99c51064fb06 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets") Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.com
2021-06-22smbdirect: missing rc checks while waiting for rdma eventsSteve French
There were two places where we weren't checking for error (e.g. ERESTARTSYS) while waiting for rdma resolution. Addresses-Coverity: 1462165 ("Unchecked return value") Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-06-22Merge branch 'wwan-link-creation-improvements'David S. Miller
Sergey Ryazanov says: ==================== net: WWAN link creation improvements This series is intended to make the WWAN network links management easier for WWAN device drivers. The series begins with adding support for network links creation to the WWAN HW simulator to facilitate code testing. Then there are a couple of changes that prepe the WWAN core code for further modifications. The following patches (4-6) simplify driver unregistering procedures by performing the created links cleanup in the WWAN core. 7th patch is to avoid the odd hold of a driver module. Next patches (8th and 9th) make it easier for drivers to create a network interface for a default data channel. Finally, 10th patch adds support for reporting of data link (aka channel aka context) id to make user aware which network interface is bound to which WWAN device data channel. All core changes have been tested with the HW simulator. The MHI and IOSM drivers were only compile tested as I have no access to this hardware. So the coresponding patches require ACK from the driver authors. Changelog: v1 -> v2: * rebased on top of latest net-next * patch that reworks the creation of mhi_net default netdev was dropped; as Loic explained, this network device has different purpose depending on a driver mode; Loic has a plan to rework the mhi_net driver, so we will defer the default netdev creation reworkings * add a new patch that creates a default network interface for IOSM modems * 7th, 8th, 10th patches have a minor updates (see the patches for details) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: add WWAN common private data for netdevSergey Ryazanov
The WWAN core not only multiplex the netdev configuration data, but process it too, and needs some space to store its private data associated with the netdev. Add a structure to keep common WWAN core data. The structure will be stored inside the netdev private data before WWAN driver private data and have a field to make it easier to access the driver data. Also add a helper function that simplifies drivers access to their data. At the moment we use the common WWAN private data to store the WWAN data link (channel) id at the time the link is created, and report it back to user using the .fill_info() RTNL callback. This should help the user to be aware which network interface is bound to which WWAN device data channel. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: iosm: create default link via WWAN coreSergey Ryazanov
Utilize the just introduced WWAN core feature to create a default netdev for the default data (IP MUX) channel. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: support default netdev creationSergey Ryazanov
Most, if not each WWAN device driver will create a netdev for the default data channel. Therefore, add an option for the WWAN netdev ops registration function to create a default netdev for the WWAN device. A WWAN device driver should pass a default data channel link id to the ops registering function to request the creation of a default netdev, or a special value WWAN_NO_DEFAULT_LINK to inform the WWAN core that the default netdev should not be created. For now, only wwan_hwsim utilize the default link creation option. Other drivers will be reworked next. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: no more hold netdev ops owning moduleSergey Ryazanov
The WWAN netdev ops owner holding was used to protect from the unexpected memory disappear. This approach causes a dependency cycle (driver -> core -> driver) and effectively prevents a WWAN driver unloading. E.g. WWAN hwsim could not be unloaded until all simulated devices are removed: ~# modprobe wwan_hwsim devices=2 ~# lsmod | grep wwan wwan_hwsim 16384 2 wwan 20480 1 wwan_hwsim ~# rmmod wwan_hwsim rmmod: ERROR: Module wwan_hwsim is in use ~# echo > /sys/kernel/debug/wwan_hwsim/hwsim0/destroy ~# echo > /sys/kernel/debug/wwan_hwsim/hwsim1/destroy ~# lsmod | grep wwan wwan_hwsim 16384 0 wwan 20480 1 wwan_hwsim ~# rmmod wwan_hwsim For a real device driver this will cause an inability to unload module until a served device is physically detached. Since the last commit we are removing all child netdev(s) when a driver unregister the netdev ops. This allows us to permit the driver unloading, since any sane driver will call ops unregistering on a device deinitialization. So, remove the holding of an ops owner to make it easier to unload a driver module. The owner field has also beed removed from the ops structure as there are no more users of this field. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22net: iosm: drop custom netdev(s) removingSergey Ryazanov
Since the last commit, the WWAN core will remove all our network interfaces for us at the time of the WWAN netdev ops unregistering. Therefore, we can safely drop the custom code that cleans the list of created netdevs. Anyway it no longer removes any netdev, since all netdevs were removed earlier in the wwan_unregister_ops() call. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> CC: M Chetan Kumar <m.chetan.kumar@intel.com> CC: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: remove all netdevs on ops unregisteringSergey Ryazanov
We use the ops owner module hold to protect against ops memory disappearing. But this approach does not protect us from a driver that unregisters ops but forgets to remove netdev(s) that were created using this ops. In such case, we are left with netdev(s), which can not be removed since ops is gone. Moreover, batch netdevs removing on deinitialization is a desireable option for WWAN drivers as it is a quite common task. Implement deletion of all created links on WWAN netdev ops unregistering in the same way that RTNL removes all links on RTNL ops unregistering. Simply remove all child netdevs of a device whose WWAN netdev ops is unregistering. This way we protecting the kernel from buggy drivers and make it easier to write a driver deinitialization code. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: multiple netdevs deletion supportSergey Ryazanov
Use unregister_netdevice_queue() instead of simple unregister_netdevice() if the WWAN netdev ops does not provide a dellink callback. This will help to accelerate deletion of multiple netdevs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: require WWAN netdev setup callback existenceSergey Ryazanov
The setup callback will be unconditionally passed to the alloc_netdev_mqs(), where the NULL pointer dereference will cause the kernel panic. So refuse to register WWAN netdev ops with warning generation if the setup callback is not provided. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan: core: relocate ops registering codeSergey Ryazanov
It is unlikely that RTNL callbacks will call WWAN ops (un-)register functions, but it is highly likely that the ops (un-)register functions will use RTNL link create/destroy handlers. So move the WWAN network interface ops (un-)register functions below the RTNL callbacks to be able to call them without forward declarations. No functional changes, just code relocation. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22wwan_hwsim: support network interface creationSergey Ryazanov
Add support for networking interface creation via the WWAN core by registering the WWAN netdev creation ops for each simulated WWAN device. Implemented minimalistic netdev support where the xmit callback just consumes all egress skbs. This should help with WWAN network interfaces creation testing. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22Merge branch 'mptcp-optimizations'David S. Miller
Mat Martineau says: ==================== mptcp: A few optimizations Here is a set of patches that we've accumulated and tested in the MPTCP tree. Patch 1 removes the MPTCP-level tx skb cache that added complexity but did not provide a meaningful benefit. Patch 2 uses the fast socket lock in more places. Patch 3 improves handling of a data-ready flag. Patch 4 deletes an unnecessary and racy connection state check. Patch 5 adds a MIB counter for one type of invalid MPTCP header. Patch 6 improves self test failure output. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 07:59:31 +0000