summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-31drm/amdgpu/sriov: Correct some register program methodEmily Deng
For the VF, some registers only could be programmed with RLC. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Trigger Huang <Trigger.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amdkfd: Return proper error code for gws alloc APIOak Zeng
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: program manual trigger only for bottom most pipeAric Cyr
[Why] We only want to manual trigger end-of-frame when the bottom-most pipe is flipped to prevent overlays from ending the frame too early. [How] Check that the manual trigger is only firing on bottom plane. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: CS_TFM_1D only applied post EOTFKrunoslav Kovac
[Why] There's some unnecessary mem allocation for CS_TFM_ID. What's worse, it depends on LUT size and since it's 4K for CS_TFM_1D, it is 16x bigger than in regular case when it's actually needed. This leads to some crashes in stress conditions. [How] Skip ramp combining designed for RGB256 and DXGI gamma with CS_TFM_1D. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Reset planes for color management changesNicholas Kazlauskas
[Why] For commits with allow_modeset=false and CRTC degamma changes the planes aren't reset. This results in incorrect rendering. [How] Reset the planes when color management has changed on the CRTC. Technically this will include regamma changes as well, but it doesn't really after legacy userspace since those commit with allow_modeset=true. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Increase Backlight Gain Step SizeEryk Brol
[Why] Some backlight tests fail due to backlight settling taking too long. This happens because the step size used to change backlight levels is too small. [How] 1. Change the size of the backlight gain step size 2. Change how DMCU firmware gets the step size value so that it is passed in by driver during DMCU initn Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: fix issues with bad AUX reply on some displaysAnthony Koo
[Why] Some displays take some time to power up AUX CH once they are put into D3 state via write to DPCD 600h=2. Interestingly enough, some display may simply NACK, but some might also ACK with a bunch of 0s, which can cause issues with receiver cap retrieval. Note that not all DPCD address return 0s, but in particular it has been observed on some higher DPCD address such as DPCD 2200h, etc. [How] Based on spec, receiver will monitor differential signal while in D3 and AUX CH is in low power mode. When detected, it may allow up to 1 ms to power up AUX CH and reply. If we read Sink power state D3, we should add 1 ms delay to satisfy this spec requirement. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Refactor DIO stream encoderEric Bernstein
* Pull duplicate audio_clock_info struct to stream_encoder.h * Generalize sec_gsp7* to sec_gsp_pps* * Expose enc1 and enc2 stream encoder audio funcs Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Modified AUX_DPHY_RX_CONTROL0Daniel He
[Description] This is cause by failing to read link caps from driver. Signed-off-by: Daniel He <daniel.he@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Add writeback_config to VBA varsIlya Bakoulin
Adding writeback_config enum to vba_vars_st, replacing old flag. Initialize to dm_normal. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Refactor clk_mgr functionsEric Yang
[Why] Some HW specific implementations can be pulled out into clk_mgr.c. [How] * Pull get_active_display_cnt out to clk_mgr. * Pull out shared logic in set_dispclk and set_dprefclk Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Fix type of pp_smu_wm_set_range structEric Yang
[why] Value read from SMU is 16 bits, not 32. [How] Fix type, and add wm_type enum in preparation for future interfaces. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: do not power on eDP power rail earlyAnthony Koo
[Why] Modern Standby may toggle display adapter state between D0 and D3 state unpredictably. But events that cause transition to D0 are not always resulting in a display light up scenario. Modern eDP panels should be able to power on panel logic quickly upon VDD going high. Based on spec, the T3 time between VDD on and HPD high can be between 0 and 80 ms. Doing any tricky sorts of optimization by powering on panel VDD early during D0 transition on can negatively impact other features due to unnecessary power drain and toggling when final system state does not intend for the panel to be lit up. We need OEMs to source higher end panels that have T3 time close to 0 if they want quick S3/Modern Standby resume times. [How] Remove panel VDD power on in init_hw Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: fix crash on setmode when mode is close to bw limitSu Sung Chung
[why] during It's possible to call dcn_validate_bandwidth with no plane. In that case, as we are only intersted in if output timing is supported or not, even if we cannot support native resolution, we still want to support lower resolution if it is valid [how] if there exist no surface, make viewport/rec_out size at max 1080p. It is already known that 1080p x 6(max # of pipes) is supported, so if we fail validation, it is because of the stream Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: fix calculation of total_data_read_bandwidthSu Sung Chung
[why] by adding fast_validate flag, we are skipping some portion of dcn_validate_bandwidth code that is not necessary for mode validation. However we have a bug where it does not calculate v->total_data_read_bandwidth, which is one of the factors determines the result of the validation, and therefore report false positive during mode validation. [how] add calculation of v->total_data_read_bandwidth outside of the region that is guarded by fast_validate flag Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: 3.2.32Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Move link functions from dc to dc_linkChris Park
[Why] link-specific functions should reside in dc_link.c [How] Move them there. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Add min_dcfclk_mhz field to bb overridesJun Lei
Add min_dcfclk_mhz to bounding box overrides. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: move clk_mgr files to right placeEric Yang
[Why] Better organization [How] Move clk_mgr files under dc/clk_mgr Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: disable PSR/ABM before destroy DMCU structPaul Hsieh
[Why] 1. DMCU is not running on some platform but driver still send ABM command. It may cause assert due to DMCU is not alive. 2. To make sure PSR disable when driver disable [How] 1. Add dmcu_is_running in ABM struct, driver can check this flag to determine driver should send ABM command or not. 2. Send PSR disable command when destroy PSR Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Ensure DRR triggers in BPEryk Brol
[Why] In the previous implementation DRR event sometimes came in during FP2 region which is a keep-out zone. This would cause the frame not to latch until the next frame which resulted in heavy flicker. To fix this we need to make sure that it triggers in the BP. [How] 1. Remove DRR programming during flip 2. Setup manual trigger for DRR event and trigger it after surface programming is complete Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Add GSL source select registersKrunoslav Kovac
GSL is a form of locking that can be used to synchronize pipes in a pipe-split configurations when async flip is used. Add the registers here. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Disable audio stream only if it's currently enabledEryk Brol
[Why] Previously there were 2 consecutive calls being made to disable audio stream. The first one disabled the audio stream, and the second one went through and also tried to disable the audio stream causing BACO entry issues due to the ASIC appearing busy. [How] 1. Add a status field to the audio struct which stores enabled/disabled info 2. In the calls to enable/disable audio stream check if we're already in the desired state before executing the function Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: assign new stream id in dc_copy_streamWenjing Liu
[why] stream id should uniquely identify an instance of stream. the copy constructor should be treated as a new stream instance. [how] assign a new stream id in this copy constructor. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Move CLK_BASE_INNER macroEric Yang
This macro is specificly used by RV1. Move it to the appropriate location. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Implement CM dealpha and bias interfacesGary Kattan
Add vtable entries for de-alpha and bias color management interfaces. Move piece-wise transfer function registers to a helper list for future reuse. Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: Don't use ROM for output TF if GAMMA_CS_TFM_1DHugo Hu
We can’t use hardcoded SRGB ROM for output TF if we have GAMMA_CS_TFM_1D (unless we know 1D LUT is identity), so we never want to return here early. We apply the LUT part of ColorTransform3x4 only in apply_lut_1d() which is called near the end of that function. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amd/display: make clk mgr soc specificEric Yang
[Why] First step of refactoring clk mgr to better handle different ways of handling clock operations. Clock operation policies are soc specific and not just DCN vesion specific. It is not a hw resource, should not be in the resource pool. [How] Change clock manager creation to be based on HW internal ID, rename clock manager members to be more clear. Move clock manager out of resource. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amdgpu:Fix the unpin warning about csb bufferEmily Deng
As it will destroy clear_state_obj, and also will unpin it in the gfx_v9_0_sw_fini, so don't need to call amdgpu_bo_free_kernel in gfx_v9_0_sw_fini, or it will have unpin warning. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31drm/amdgpu: ras injection use gpu addressxinhui pan
injection need a valid gpu address. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-31Merge tag 'spdx-5.2-rc3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits) treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 ...
2019-05-31Merge tag 'staging-5.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some Staging and IIO driver fixes to resolve some reported problems for 5.2-rc3. Nothing major here, just some tiny changes, full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'staging-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000' staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup() staging: vc04_services: prevent integer overflow in create_pagelist() Staging: vc04_services: Fix a couple error codes staging: wlan-ng: fix adapter initialization failure staging: kpc2000: double unlock in error handling in kpc_dma_transfer() staging: kpc2000: Fix build error without CONFIG_UIO staging: kpc2000: fix build error on xtensa staging: erofs: set sb->s_root to NULL when failing from __getname() iio: adc: ti-ads8688: fix timestamp is not updated in buffer iio: dac: ds4422/ds4424 fix chip verification iio: imu: mpu6050: Fix FIFO layout for ICM20602 iio: adc: ads124: avoid buffer overflow iio: adc: modify NPCM ADC read reference voltage
2019-05-31Merge tag 'tty-5.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serial and TTY driver fixes for 5.2-rc3. Nothing major, just a number of fixes for reported issues. The fbcon core fix also resolves an issue, and was acked by the relevant maintainer to go through this tree. All of these have been in linux-next with no reported issues" * tag 'tty-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt/fbcon: deinitialize resources in visual_init() after failed memory allocation tty: max310x: Fix external crystal register setup serial: sh-sci: disable DMA for uart_console serial: imx: remove log spamming error message tty: serial: msm_serial: Fix XON/XOFF
2019-05-31Merge tag 'usb-5.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some tiny USB fixes for a number of reported issues for 5.2-rc3. Nothing huge here, just a small collection of xhci and other driver bugs that syzbot has been finding in some drivers. There is also a usbip fix and a fix for the usbip fix in here :) All have been in linux-next with no reported issues" * tag 'usb-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbip: usbip_host: fix stub_dev lock context imbalance regression media: smsusb: better handle optional alignment xhci: Use %zu for printing size_t type xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() xhci: Fix immediate data transfer if buffer is already DMA mapped usb: xhci: avoid null pointer deref when bos field is NULL usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint() xhci: update bounce buffer with correct sg num media: usb: siano: Fix false-positive "uninitialized variable" warning USB: rio500: update Documentation USB: rio500: simplify locking USB: rio500: fix memory leak in close after disconnect USB: rio500: refuse more than one device at a time usbip: usbip_host: fix BUG: sleeping function called from invalid context USB: sisusbvga: fix oops in error path of sisusb_probe USB: Add LPM quirk for Surface Dock GigE adapter media: usb: siano: Fix general protection fault in smsusb usb: mtu3: fix up undefined reference to usb_debug_root USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor
2019-05-31Merge tag 'drm-fixes-2019-05-31' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too crazy, pretty quiet, maybe too quiet. amdgpu: - a fixed version of the raven firmware fix we previously reverted - stolen memory fix imx: - regression fix qxl: - remove a bad warning etnaviv: - VM locking fix" * tag 'drm-fixes-2019-05-31' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: reserve stollen vram for raven series drm/etnaviv: lock MMU while dumping core drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q drm/qxl: drop WARN_ONCE() drm/amd/display: Don't load DMCU for Raven 1 (v2)
2019-05-31drm/bridge: sii902x: Implement HDMI audio supportJyri Sarha
Implement HDMI audio support by using ASoC HDMI codec. The commit implements the necessary callbacks and configuration for the HDMI codec and registers a virtual platform device for the codec to attach. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/ef6895d016554b1e0c8b388d4993bcd6a3699341.1558964241.git.jsarha@ti.com
2019-05-31dt-bindings: display: sii902x: Add HDMI audio bindingsJyri Sarha
The sii902x chip family supports also HDMI audio. Add binding for describing the necessary i2s and mclk wiring for it. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/f790277fabc45f987f90075dd842368705226a84.1558964241.git.jsarha@ti.com
2019-05-31dt-bindings: display: sii902x: Remove trailing white spaceJyri Sarha
Remove trailing white space from sii902x display bridge binding. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/f1f2ef82c4e8ecea920c408bd4e569f5ed27d20a.1558964241.git.jsarha@ti.com
2019-05-31drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHzJyri Sarha
The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a2a8eae0b9d6333e7a5841026bf7fd65c9ccd09.1558964241.git.jsarha@ti.com
2019-05-31drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDIDJyri Sarha
Set output mode to HDMI or DVI according to EDID HDMI signature. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/c42838073b83185a5cf9949caab3c70ee093b791.1558964241.git.jsarha@ti.com
2019-05-31drm/bridge: sii902x: add input_bus_flagsTomi Valkeinen
The driver always sets InputBusFmt:EDGE to 0 (falling edge). Add drm_bridge_timings's input_bus_flags to reflect that the bridge samples on falling edges. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/deb02a1fd508c514472a4e660092f301e6681361.1558964241.git.jsarha@ti.com
2019-05-31Revert "lockd: Show pid of lockd for remote locks"Benjamin Coddington
This reverts most of commit b8eee0e90f97 ("lockd: Show pid of lockd for remote locks"), which caused remote locks to not be differentiated between remote processes for NLM. We retain the fixup for setting the client's fl_pid to a negative value. Fixes: b8eee0e90f97 ("lockd: Show pid of lockd for remote locks") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: XueWei Zhang <xueweiz@google.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-05-31dt-bindings: tc358767: add HPD supportTomi Valkeinen
Add DT property for defining the pin used for HPD. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-25-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: add IRQ and HPD supportTomi Valkeinen
Add support for interrupt and hotplug handling. Both are optional. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-24-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: add GPIO & interrupt registersTomi Valkeinen
Add GPIO and interrupt related registers for HPD work. Mark INTSTS_G and GPIOI as volatile. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-23-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: read display_props in get_modes()Tomi Valkeinen
We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering. To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-22-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: copy the mode data, instead of storing the pointerTomi Valkeinen
In tc_bridge_mode_set callback, we store the pointer to the given drm_display_mode, and use the mode later. Storing a pointer in such a way looks very suspicious to me, and I have observed odd issues where the timings were apparently (at least mostly) zero. Do a copy of the drm_display_mode instead to ensure we don't refer to freed/modified data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-21-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: remove tc_connector_best_encoderTomi Valkeinen
drm_connector_helper_funcs.best_encoder is only needed when the connector can have more than one encoder, and that is never the case here. So remove tc_connector_best_encoder. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-20-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: use bridge mode_validTomi Valkeinen
We have tc_connector_mode_valid() to filter out videomdoes that the tc358767 cannot support. As it is a bridge limitation, change the code to use drm_bridge_funcs's mode_valid instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-19-tomi.valkeinen@ti.com
2019-05-31drm/bridge: tc358767: remove check for video mode in link enableTomi Valkeinen
tc_main_link_enable() checks if videomode has been set, and fails if there's no videomode. As tc_main_link_enable() no longer depends on the videomode, we can drop the check. Also, while tc_stream_enable() does depend on the videomode, we can expect that a mode has been set before drm_bridge_funcs.enable is called, so we don't need the check there either. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-18-tomi.valkeinen@ti.com
generated by cgit (git 2.34.1) at 2025-09-15 18:04:32 +0000