summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-16Watchdog: introduce ARM SBSA watchdog driverFu Wei
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog or a two stages watchdog, it's set up by the module parameter "action". In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. In the two stages mode, when the timeout is reached, the first signal (WS0) will trigger panic. If the system is getting into trouble and cannot be reset by panic or restart properly by the kdump kernel(if supported), then the second stage (as long as the first stage) will be reached, system will be reset by WS1. This function can help administrator to backup the system context info by panic console output or kdump. This driver bases on linux kernel watchdog framework, so it can get timeout from module parameter and FDT at the driver init stage. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Tested-by: Pratyush Anand <panand@redhat.com> Acked-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-16nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failedJeff Layton
I hit the following oops out of the blue while testing with flexfiles: BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [<ffffffffa048f6b8>] nfs4_ff_find_or_create_ds_client+0x48/0x50 [nfs_layout_flexfiles] PGD 44031067 PUD 5062d067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: nfsv3 nfs_layout_flexfiles tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache dcdbas nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw bonding ipmi_devintf ipmi_msghandler snd_hda_codec_generic virtio_balloon ppdev snd_hda_intel snd_hda_controller snd_hda_codec iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_core parport_pc snd_hwdep parport snd_seq snd_seq_device snd_pcm snd_timer acpi_cpufreq snd soundcore i2c_piix4 xfs libcrc32c joydev virtio_net virtio_console qxl drm_kms_helper ttm crc32c_intel drm virtio_pci serio_raw ata_generic virtio_ring virtio pata_acpi CPU: 0 PID: 19138 Comm: test5 Not tainted 4.1.9-100.pd.90.el7.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 task: ffff88007b70cf00 ti: ffff88004cc44000 task.ti: ffff88004cc44000 RIP: 0010:[<ffffffffa048f6b8>] [<ffffffffa048f6b8>] nfs4_ff_find_or_create_ds_client+0x48/0x50 [nfs_layout_flexfiles] RSP: 0018:ffff88004cc47890 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffff880050932300 RCX: ffff88006978f488 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003e0e8540 RBP: ffff88004cc47908 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88007ff8c758 R11: 0000000000000005 R12: ffff88003e0e8540 R13: 0000000000000000 R14: ffff88006978f488 R15: ffff88004431cc80 FS: 00007fea40c7c740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e8 CR3: 0000000044318000 CR4: 00000000000406f0 Stack: ffffffffa048c934 ffff880050932310 0000000100000001 ffff88006978f510 ffff88006978f3c8 ffff88003e56cd90 ffff88004cc479d0 00000020a052aff0 000000000004b000 ffff88004cc47908 ffff880050932300 ffff88004cc479d0 Call Trace: [<ffffffffa048c934>] ? ff_layout_write_pagelist+0x64/0x220 [nfs_layout_flexfiles] [<ffffffffa057a3bf>] pnfs_generic_pg_writepages+0xaf/0x1b0 [nfsv4] [<ffffffffa051ab57>] nfs_pageio_doio+0x27/0x60 [nfs] [<ffffffffa051bfe4>] nfs_pageio_complete_mirror+0x54/0xa0 [nfs] [<ffffffffa051c7ad>] nfs_pageio_complete+0x2d/0x90 [nfs] [<ffffffffa052032d>] nfs_writepage_locked+0x8d/0xe0 [nfs] [<ffffffff811e4630>] ? page_referenced_one+0x1a0/0x1a0 [<ffffffffa05210e7>] nfs_wb_single_page+0xf7/0x190 [nfs] [<ffffffffa05108d1>] nfs_launder_page+0x41/0x90 [nfs] [<ffffffff811b8930>] invalidate_inode_pages2_range+0x340/0x3a0 [<ffffffff811b89a7>] invalidate_inode_pages2+0x17/0x20 [<ffffffffa0513e1e>] nfs_release+0x9e/0xb0 [nfs] [<ffffffffa050fa1d>] nfs_file_release+0x3d/0x60 [nfs] [<ffffffff8122481c>] __fput+0xdc/0x1e0 [<ffffffff8122496e>] ____fput+0xe/0x10 [<ffffffff810bde67>] task_work_run+0xa7/0xe0 [<ffffffff810af735>] get_signal+0x565/0x600 [<ffffffff811a9815>] ? __filemap_fdatawrite_range+0x65/0x90 [<ffffffff810144a7>] do_signal+0x37/0x730 [<ffffffffa0569921>] ? nfs4_file_fsync+0x81/0x150 [nfsv4] [<ffffffff81254dbb>] ? vfs_fsync_range+0x3b/0xb0 [<ffffffff811446a6>] ? __audit_syscall_exit+0x1e6/0x280 [<ffffffff81014bff>] do_notify_resume+0x5f/0xa0 [<ffffffff8178ec3c>] int_signal+0x12/0x17 Code: 48 8b 40 70 8b 00 83 f8 03 74 20 83 f8 04 75 13 55 48 89 ce 48 89 d7 48 89 e5 e8 14 0f 0e 00 5d c3 66 90 0f 0b 66 0f 1f 44 00 00 <48> 8b 82 e8 00 00 00 c3 66 66 66 66 90 55 48 89 e5 41 57 41 56 RIP [<ffffffffa048f6b8>] nfs4_ff_find_or_create_ds_client+0x48/0x50 [nfs_layout_flexfiles] RSP <ffff88004cc47890> CR2: 00000000000000e8 When the DS connection attempt fails, nfs4_ff_layout_prepare_ds marks it for the error but then just returns the ds as if it were usable. The comments though say: /* Upon return, either ds is connected, or ds is NULL */ Ensure that we set the return pointer to NULL in the event that the connection attempt fails. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-03-16nfs: remove nfs_inode_dio_waitChristoph Hellwig
Just call inode_dio_wait directly instead of through a pointless wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-03-16nfs: remove nfs4_file_fsyncChristoph Hellwig
The only difference to nfs_file_fsync is the call to pnfs_sync_inode. But pnfs_sync_inode is just an inline that calls a pNFS layout driver method if CONFIG_PNFS is designed, and thus can be called just fine from the core NFS module. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-03-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - some misc things - ofs2 updates - about half of MM - checkpatch updates - autofs4 update * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits) autofs4: fix string.h include in auto_dev-ioctl.h autofs4: use pr_xxx() macros directly for logging autofs4: change log print macros to not insert newline autofs4: make autofs log prints consistent autofs4: fix some white space errors autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked() autofs4: fix coding style line length in autofs4_wait() autofs4: fix coding style problem in autofs4_get_set_timeout() autofs4: coding style fixes autofs: show pipe inode in mount options kallsyms: add support for relative offsets in kallsyms address table kallsyms: don't overload absolute symbol type for percpu symbols x86: kallsyms: disable absolute percpu symbols on !SMP checkpatch: fix another left brace warning checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses checkpatch: warn on bare unsigned or signed declarations without int checkpatch: exclude asm volatile from complex macro check mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate() mm: migrate: consolidate mem_cgroup_migrate() calls mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous ...
2016-03-16Merge branches 'nes', 'cxgb4' and 'iwpm' into k.o/for-4.6Doug Ledford
2016-03-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix misspellings in comments. m68k: Use conventional function parameters for do_sigreturn zorro: Use kobj_to_dev()
2016-03-16i40iw: changes for build of i40iw moduleFaisal Latif
MAINTAINERS, Kconfig, and Makefile to build i40iw module Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: Kconfig and Makefile for iwarp moduleFaisal Latif
Kconfig and Makefile needed to build iwarp module. Changes since v2: moved from Kbuild to Makefile Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: virtual channel handling filesFaisal Latif
i40iw_vf.[ch] and i40iw_virtchnl[ch] are used for virtual channel support for iWARP VF module. Changes since v2: code cleanup Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: user kernel shared filesFaisal Latif
i40iw_user.h and i40iw_uk.c are used by both user library as well as kernel requests. Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: add X722 register fileFaisal Latif
X722 Hardware registers defines for iWARP component. Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: add hardware related header filesFaisal Latif
header files for hardware accesses Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: add file to handle cqp callsFaisal Latif
i40iw_ctrl.c provides for hardware wqe support and cqp. Changes since v2: cleanup coccinelle error reported by Julia Lawall Changes since v1: reported by Christoph Hellwig's review -remove unnecessary casts Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16i40iw: use shared code for port mapperFaisal Latif
Removei/change for port mapper code which has been moved to iwcm. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16iwpm: crash fix for large connections testFaisal Latif
During large connection test, there is a crash at wake_up() in the callback as waitq is not yet initialized. Callback can happen before iwpm_wait_complete_req() is called to initialize waitq. To resolve, using signaling semaphore instead of waitq. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Reviewed-by: Tatyana E Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16iw_cxgb3: support for iWARP port mappingSteve Wise
Now with the new iWARP port mapping service in the iwcm, it is trivial to add cxgb3 support. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16iw_cxgb4: remove port mapper related codeSteve Wise
Now that most of the port mapper code been moved to iwcm, we can remove it from iw_cxgb4. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16iw_nes: remove port mapper related codeFaisal Latif
Now that most of the port mapper code been moved to iwcm, we can remove it from port mapper service user drivers. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Tatyana E. Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16iwcm: common code for port mapperFaisal Latif
moved port mapper related code from drivers into common code Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Tatyana E. Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Add the CPU id for the new z13s machine - Add a s390 specific XOR template for RAID-5 checksumming based on the XC instruction. Remove all other alternatives, XC is always faster - The merge of our four different stack tracers into a single one - Tidy up the code related to page tables, several large inline functions are now out-of-line. Bloat-o-meter reports ~11K text size reduction - A binary interface for the priviledged CLP instruction to retrieve the hardware view of the installed PCI functions - Improvements for the dasd format code - Bug fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/pci: enforce fmb page boundary rule s390: fix floating pointer register corruption (again) s390/cpumf: add missing lpp magic initialization s390: Fix misspellings in comments s390/mm: split arch/s390/mm/pgtable.c s390/mm: uninline pmdp_xxx functions from pgtable.h s390/mm: uninline ptep_xxx functions from pgtable.h s390/pci: add ioctl interface for CLP s390: Use pr_warn instead of pr_warning s390/dasd: remove casts to dasd_*_private s390/dasd: Refactor dasd format functions s390/dasd: Simplify code in format logic s390/dasd: Improve dasd format code s390/percpu: remove this_cpu_cmpxchg_double_4 s390/cpumf: Improve guest detection heuristics s390/fault: merge report_user_fault implementations s390/dis: use correct escape sequence for '%' character s390/kvm: simplify set_guest_storage_key s390/oprofile: add z13/z13s model numbers s390: add z13s model number to z13 elf platform ...
2016-03-16Merge branches 'mlx4', 'mlx5' and 'ocrdma' into k.o/for-4.6Doug Ledford
2016-03-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32 Pull AVR32 updates from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: fix asm operand constraint in cmpxchg() avr32: wire up copy_file_range syscall
2016-03-16vfs: show_vfsstat: do not ignore errors from show_devname methodDmitry V. Levin
Explicitly check show_devname method return code and bail out in case of an error. This fixes regression introduced by commit 9d4d65748a5c. Cc: stable@vger.kernel.org Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "One of the largest releases for KVM... Hardly any generic changes, but lots of architecture-specific updates. ARM: - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems - PMU support for guests - 32bit world switch rewritten in C - various optimizations to the vgic save/restore code. PPC: - enabled KVM-VFIO integration ("VFIO device") - optimizations to speed up IPIs between vcpus - in-kernel handling of IOMMU hypercalls - support for dynamic DMA windows (DDW). s390: - provide the floating point registers via sync regs; - separated instruction vs. data accesses - dirty log improvements for huge guests - bugfixes and documentation improvements. x86: - Hyper-V VMBus hypercall userspace exit - alternative implementation of lowest-priority interrupts using vector hashing (for better VT-d posted interrupt support) - fixed guest debugging with nested virtualizations - improved interrupt tracking in the in-kernel IOAPIC - generic infrastructure for tracking writes to guest memory - currently its only use is to speedup the legacy shadow paging (pre-EPT) case, but in the future it will be used for virtual GPUs as well - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits) KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch KVM: x86: disable MPX if host did not enable MPX XSAVE features arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit arm64: KVM: vgic-v3: Reset LRs at boot time arm64: KVM: vgic-v3: Do not save an LR known to be empty arm64: KVM: vgic-v3: Save maintenance interrupt state only if required arm64: KVM: vgic-v3: Avoid accessing ICH registers KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit KVM: arm/arm64: vgic-v2: Reset LRs at boot time KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers KVM: s390: allocate only one DMA page per VM KVM: s390: enable STFLE interpretation only if enabled for the guest KVM: s390: wake up when the VCPU cpu timer expires KVM: s390: step the VCPU timer while in enabled wait KVM: s390: protect VCPU cpu timer with a seqcount KVM: s390: step VCPU cpu timer during kvm_run ioctl ...
2016-03-16Merge tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: - Altera: L2 cache and On-Chip RAM support (Thor Thayer). - EDAC: Workqueue handling cleanups (Borislav Petkov). - Xgene: Register bus error handling (Loc Ho). - Misc small fixes. * tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: ARM: socfpga: Enable OCRAM ECC on startup ARM: socfpga: Enable L2 cache ECC on startup ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries EDAC, altera: Add Altera L2 cache and OCRAM support EDAC: Use edac_debugfs_remove_recursive() in edac_debugfs_exit() EDAC, mpc85xx: Silence unused variable warning EDAC: Cleanup/sync workqueue functions EDAC: Kill workqueue setup/teardown functions EDAC: Balance workqueue setup and teardown arm64: Update the APM X-Gene EDAC node with the RB register resource EDAC, xgene: Add missing SoC register bus error handling Documentation, EDAC: Update xgene binding for missing register bus EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()
2016-03-16ALSA: mixart: silence an uninitialized variable warningDan Carpenter
We could print the uninitialized value of "stat" in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-16nfsd: fix deadlock secinfo+readdir compoundJ. Bruce Fields
nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also unlocks if necessary (nfsd filehandle locking is probably too lenient), so it gets unlocked eventually, but if the following op in the compound needs to lock it again, we can deadlock. A fuzzer ran into this; normal clients don't send a secinfo followed by a readdir in the same compound. Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-16NVMe: Expose ns wwid through single sysfs entryKeith Busch
The method to uniquely identify a namespace depends on the controller's specification revision level and implemented capabilities. This patch has the driver figure this out and exports the unique string through a single 'wwid' attribute so the user doesn't have this burden. The longest namespace unique identifier is used if available. If not available, the driver will concat the controller's vendor, serial, and model with the namespace ID. The specification provides this as a unique indentifier. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-16fuse: return patrial success from fuse_direct_io()Ashish Samant
If a user calls writev/readv in direct io mode with partially valid data in the iovec array such that any vector other than the first one in the array contains invalid data, we currently return the error for the invalid iovec. Instead, we should return the number of bytes already written/read and not the error as we do in the non direct_io case. Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-16gpu: host1x: Use a signed return type for do_relocs()Markus Elfring
The return type "unsigned int" was used by the do_relocs() function despite the fact that it will eventually return a negative error code. Use a signed integer instead to accomodate for error codes. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-16gpu: host1x: bus: Add missing of_node_put()Amitoj Kaur Chawla
for_each_child_of_node() performs an of_node_get() on each iteration, so to break out of the loop an of_node_put() is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_child_of_node(..., n) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-03-16gpio: mcp23s08: Fix clearing of interrupt.Phil Reid
The mcp23s18 is configurable on clearing the interrupt on either reading INTCAP or GPIO. Since driver reads INTCAP in IRQ and not the GPIO reg need to set control byte for this mode. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpiolib: Fix comment referring to gpio_*() in gpiod_*()Geert Uytterhoeven
Fixes: 79a9becda8940deb ("gpiolib: export descriptor-based GPIO interface") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bitGeert Uytterhoeven
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Cc: stable@vger.kernel.org Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: xgene: Fix kconfig for standby GIPO contollerMatthias Brugger
The standby GPIO controller can be used as a interrupt controller. Select GPIOLIB_IRQCHIP when compiling this driver. Otherwise we get a compilation error: drivers/gpio/gpio-xgene-sb.c: In function 'xgene_gpio_sb_probe': drivers/gpio/gpio-xgene-sb.c:312:10: error: 'struct gpio_chip' has no member named 'irqdomain' priv->gc.irqdomain = priv->irq_domain; ^ scripts/Makefile.build:295: recipe for target 'drivers/gpio/gpio-xgene-sb.o' failed make[2]: *** [drivers/gpio/gpio-xgene-sb.o] Error 1 Fixes: 1013fc41 "gpio: xgene: Enable X-Gene standby GPIO as interrupt controller" Signed-off-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16ALSA: usb-audio: Add sanity checks for endpoint accessesTakashi Iwai
Add some sanity check codes before actually accessing the endpoint via get_endpoint() in order to avoid the invalid access through a malformed USB descriptor. Mostly just checking bNumEndpoints, but in one place (snd_microii_spdif_default_get()), the validity of iface and altsetting index is checked as well. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-16ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()Takashi Iwai
Just a minor code cleanup: unify the error paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-16ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()Takashi Iwai
create_fixed_stream_quirk() may cause a NULL-pointer dereference by accessing the non-existing endpoint when a USB device with a malformed USB descriptor is used. This patch avoids it simply by adding a sanity check of bNumEndpoints before the accesses. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-16mmc: mmc_spi: Add Card Detect comments and fix CD GPIO caseMagnus Damm
This patch fixes the MMC SPI driver from doing polling card detect when a CD GPIO that supports interrupts is specified using the gpios DT property. Without this patch the DT node below results in the following output: spi_gpio: spi-gpio { /* SD2 @ CN12 */ compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; status = "okay"; spi@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; spi-max-frequency = <25000000>; gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */ }; }; # dmesg | grep mmc mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new SDHC card on SPI mmcblk0: mmc0:0000 SU04G 3.69 GiB mmcblk0: p1 With this patch applied the "cd polling" portion above disappears. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-16mmc: tegra: Disable UHS-I modes for tegra114Jon Hunter
SD card support for Tegra114 started failing after commit a8e326a911d3 ("mmc: tegra: implement module external clock change") was merged. This commit was part of a series to enable UHS-I modes for Tegra. To workaround this problem for now, disable UHS-I modes for Tegra114 by separating the soc data structures for Tegra114 and Tegra124 so that UHS-I is still enabled for Tegra124 but not Tegra114. Fixes: a8e326a911d3 ("mmc: tegra: implement module external clock change") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Lucas Stach <dev@lynxeye.de> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-16HID: microsoft: Add ID for MS Wireless Comfort KeyboardSlava Bacherikov
Microsoft Wireless Comfort Keyboard has vendor specific My Favorites 1-5 keys. Linux already supports this buttons on other MS keyboards by MS_ERGONOMY quirk. So apply MS_ERGONOMY quirk to USB PID 0x00e3 (Microsoft Wireless Optical Desktop Receiver 3.0A). After this My Favorites 1..5 keys will be reported as KEY_F14..KEY_F15 events. Signed-off-by: Slava Bacherikov <slava@bacher09.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-16mfd: intel-lpss: Pass I2C configuration via properties on BXTMika Westerberg
I2C host controller need to be configured properly in order to meet I2C timings specified in the I2C protocol specification. Some Intel Broxton based machines do not have this information in the ACPI namespace (or the boot firmware does not support ACPI at all) so we use build-in device properties instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: imx6sx: Add PCIe register definitions for iomuxc gprChristoph Fritz
This patch adds macros to define masks and bits for imx6sx PCIe registers. This is based on a patch by Richard Zhu. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: ipaq-micro: Use __maybe_unused to hide pm functionsArnd Bergmann
The ipaq-micro driver uses SET_SYSTEM_SLEEP_PM_OPS() to remove the reference to its resume function, but does not use an #ifdef around the definition, so we get a build warning: drivers/mfd/ipaq-micro.c:379:12: error: 'micro_resume' defined but not used [-Werror=unused-function] This adds a __maybe_unused annotation so the compiler knows it can silently drop it instead of warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Add max77802 to I2C device ID tableJavier Martinez Canillas
The max77686 MFD driver supports both the Maxim 77686 and Maxim 77802 PMICs but only the OF device table contains entries for both devices. The max77802 entry is missing in the I2C device ID table which isn't a problem currently since the driver only supports DT but it will be needed if the driver is changed to be built as a module since the I2C core always reports a I2C modalias uevent so auto-load will not work. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Export OF module alias informationJavier Martinez Canillas
When the device is registered via OF, the OF table is used to match the driver instead of the I2C device ID table but the entries in the latter are used as aliasses to load the module if the driver was not built-in. This is because the I2C core always reports an I2C module alias instead of an OF one but that could change so it is better to always export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Allow driver to be built as a moduleJavier Martinez Canillas
The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: stmpe: Add the proper PWM resourcesLinus Walleij
This adds the PWM resources to the STMPE MFD driver, so that it can properly grab and use them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: tps65090: Set regmap config reg counts properlyMaciej S. Szmigiero
Regmap config max_register field should contain number of device last register, however num_reg_defaults_raw field should be set to register count instead (usually one register more than max_register). tps65090 driver had both of these fields set to the same value, fix this by introducing separate defines for max register number and total count of registers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 13:33:33 +0000