summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-16drm/i915/display: Add 480 MHz CDCLK steps for RPL-UChaitanya Kumar Borah
A new step of 480MHz has been added on SKUs that have a RPL-U device id to support 120Hz displays more efficiently. Use a new quirk to identify the machine for which this change needs to be applied. v2: (Matt) - Add missing clock steps - Correct reference clock typo v3: - Revert to RPL-U subplatform (Jani) v4: - Remove Bspec reference from code (Jani) Bspec: 55409 Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130100806.1373883-3-chaitanya.kumar.borah@intel.com
2023-02-16drm/i915: Add RPL-U sub platformChaitanya Kumar Borah
Separate out RPLU device ids and add them to both RPL and newly created RPL-U subplatforms. v2: (Matt) - Sort PCI-IDs numerically - Name the sub-platform to accurately depict what it is for - Make RPL-U part of RPL subplatform v3: revert to RPL-U subplatform (Jani) v4: (Jani) - Add RPL-U ids to RPL-P platform - Remove redundant comment Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130100806.1373883-2-chaitanya.kumar.borah@intel.com
2023-02-16iommu/amd: Improve page fault error reportingVasant Hegde
If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flagsAndrew Donnellan
When a user updates a variable through the PLPKS secvar interface, we take the first 8 bytes of the data written to the update attribute to pass through to the H_PKS_SIGNED_UPDATE hcall as flags. These bytes are always written in big-endian format. Currently, the flags bytes are memcpy()ed into a u64, which is then loaded into a register to pass as part of the hcall. This means that on LE systems, the bytes are in the wrong order. Use be64_to_cpup() instead, to ensure the flags bytes are byteswapped if necessary. Reported-by: Stefan Berger <stefanb@linux.ibm.com> Fixes: ccadf154cb00 ("powerpc/pseries: Implement secvars for dynamic secure boot") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230216070903.355091-1-ajd@linux.ibm.com
2023-02-16drm/i915: Clean up g4x+ sprite TILEOFF programmingVille Syrjälä
We defined the bitmasks for DVSTILEOFF but never used them. Remedy that. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230214134739.25077-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-16drm/i915: Don't hide function calls with side effectsVille Syrjälä
Hiding a function call with side effects inside the variable declaration block is a bit rude. Make it stand out more. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230214134739.25077-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-16drm/i915: Make backlight setup debugs consistentVille Syrjälä
It's confusing to debug backlight issues when one can't easily even tell what kind of backlight control was selected. Sprinkle uniform debug messages to all the backlight setup functions. Also the one that was already there (ext_pwm) was using drm_info() for some reason. I don't think that's warranted so switch it to drm_dbg_kms() as well. v2: Deal with AUX backlights too (Jani) Move the VLV/CHV initial pipe debug there too (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230215135616.30411-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-16iommu/amd: Do not identity map v2 capable device when snp is enabledVasant Hegde
Flow: - Booted system with SNP enabled, memory encryption off and IOMMU DMA translation mode - AMD driver detects v2 capable device and amd_iommu_def_domain_type() returns identity mode - amd_iommu_domain_alloc() returns NULL an SNP is enabled - System will fail to register device On SNP enabled system, passthrough mode is not supported. IOMMU default domain is set to translation mode. We need to return zero from amd_iommu_def_domain_type() so that it allocates translation domain. Fixes: fb2accadaa94 ("iommu/amd: Introduce function to check and enable SNP") CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16Merge branch 'net-sched-transition-actions-to-pcpu-stats-and-rcu'Paolo Abeni
Pedro Tammela says: ==================== net/sched: transition actions to pcpu stats and rcu Following the work done for act_pedit[0], transition the remaining tc actions to percpu stats and rcu, whenever possible. Percpu stats make updating the action stats very cheap, while combining it with rcu action parameters makes it possible to get rid of the per action lock in the datapath. For act_connmark and act_nat we run the following tests: - tc filter add dev ens2f0 ingress matchall action connmark - tc filter add dev ens2f0 ingress matchall action nat ingress any 10.10.10.10 Our setup consists of a 26 cores Intel CPU and a 25G NIC. We use TRex to shoot 10mpps TCP packets and take perf measurements. Both actions improved performance as expected since the datapath lock disappeared. For act_pedit we move the drop counter to percpu, when available. For act_gate we move the counters to percpu, when available. [0] https://lore.kernel.org/all/20230131145149.3776656-1-pctammela@mojatatu.com/ ==================== Link: https://lore.kernel.org/r/20230214211534.735718-1-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_pedit: use percpu overlimit counter when availablePedro Tammela
Since act_pedit now has access to percpu counters, use the tcf_action_inc_overlimit_qstats wrapper that will use the percpu counter whenever they are available. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_gate: use percpu statsPedro Tammela
The tc action act_gate was using shared stats, move it to percpu stats. tdc results: 1..12 ok 1 5153 - Add gate action with priority and sched-entry ok 2 7189 - Add gate action with base-time ok 3 a721 - Add gate action with cycle-time ok 4 c029 - Add gate action with cycle-time-ext ok 5 3719 - Replace gate base-time action ok 6 d821 - Delete gate action with valid index ok 7 3128 - Delete gate action with invalid index ok 8 7837 - List gate actions ok 9 9273 - Flush gate actions ok 10 c829 - Add gate action with duplicate index ok 11 3043 - Add gate action with invalid index ok 12 2930 - Add gate action with cookie Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_connmark: transition to percpu stats and rcuPedro Tammela
The tc action act_connmark was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 13.55% tcf_connmark_act - 81.18% _raw_spin_lock 80.46% native_queued_spin_lock_slowpath perf after: - 2.85% tcf_connmark_act tdc results: 1..15 ok 1 2002 - Add valid connmark action with defaults ok 2 56a5 - Add valid connmark action with control pass ok 3 7c66 - Add valid connmark action with control drop ok 4 a913 - Add valid connmark action with control pipe ok 5 bdd8 - Add valid connmark action with control reclassify ok 6 b8be - Add valid connmark action with control continue ok 7 d8a6 - Add valid connmark action with control jump ok 8 aae8 - Add valid connmark action with zone argument ok 9 2f0b - Add valid connmark action with invalid zone argument ok 10 9305 - Add connmark action with unsupported argument ok 11 71ca - Add valid connmark action and replace it ok 12 5f8f - Add valid connmark action with cookie ok 13 c506 - Replace connmark with invalid goto chain control ok 14 6571 - Delete connmark action with valid index ok 15 3426 - Delete connmark action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: act_nat: transition to percpu stats and rcuPedro Tammela
The tc action act_nat was using shared stats and taking the per action lock in the datapath. Improve it by using percpu stats and rcu. perf before: - 10.48% tcf_nat_act - 81.83% _raw_spin_lock 81.08% native_queued_spin_lock_slowpath perf after: - 0.48% tcf_nat_act tdc results: 1..27 ok 1 7565 - Add nat action on ingress with default control action ok 2 fd79 - Add nat action on ingress with pipe control action ok 3 eab9 - Add nat action on ingress with continue control action ok 4 c53a - Add nat action on ingress with reclassify control action ok 5 76c9 - Add nat action on ingress with jump control action ok 6 24c6 - Add nat action on ingress with drop control action ok 7 2120 - Add nat action on ingress with maximum index value ok 8 3e9d - Add nat action on ingress with invalid index value ok 9 f6c9 - Add nat action on ingress with invalid IP address ok 10 be25 - Add nat action on ingress with invalid argument ok 11 a7bd - Add nat action on ingress with DEFAULT IP address ok 12 ee1e - Add nat action on ingress with ANY IP address ok 13 1de8 - Add nat action on ingress with ALL IP address ok 14 8dba - Add nat action on egress with default control action ok 15 19a7 - Add nat action on egress with pipe control action ok 16 f1d9 - Add nat action on egress with continue control action ok 17 6d4a - Add nat action on egress with reclassify control action ok 18 b313 - Add nat action on egress with jump control action ok 19 d9fc - Add nat action on egress with drop control action ok 20 a895 - Add nat action on egress with DEFAULT IP address ok 21 2572 - Add nat action on egress with ANY IP address ok 22 37f3 - Add nat action on egress with ALL IP address ok 23 6054 - Add nat action on egress with cookie ok 24 79d6 - Add nat action on ingress with cookie ok 25 4b12 - Replace nat action with invalid goto chain control ok 26 b811 - Delete nat action with valid index ok 27 a521 - Delete nat action with invalid index Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16Revert "drm/vc4: hdmi: Enforce the minimum rate at runtime_resume"Maxime Ripard
This reverts commit ae71ab585c819f83aec84f91eb01157a90552ef2. Commit ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume") was introduced to work around an issue partly due to the clk-bcm2835 driver on the RaspberryPi0-3. Since we're not using that driver for our HDMI clocks, we can now revert it. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-4-d646ff6fb842@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-16Revert "drm/vc4: hdmi: Fix HSM clock too low on Pi4"Maxime Ripard
This reverts commit 3bc6a37f59f21a8bfaf74d0975b2eb0b2d52a065. Commit 3bc6a37f59f2 ("drm/vc4: hdmi: Fix HSM clock too low on Pi4") was introduced to work around an issue partly due to the clk-bcm2835 driver on the RaspberryPi0-3. Since we're not using that driver for our HDMI clocks, we can now revert that inelegant solution. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-3-d646ff6fb842@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-16drm/vc4: hdmi: Enable power domain before setting minimumMaxime Ripard
On the RaspberryPi0-3, the HSM clock was provided by the clk-bcm2835 driver, but on the Pi4 it was provided by the firmware through the clk-raspberrypi driver. The clk-bcm2835 driver registers the HSM clock using the CLK_SET_RATE_GATE flag that prevents any modification to the rate while the clock is active. This meant that we needed to call clk_set_min_rate() before our call to pm_runtime_resume_and_get() since our runtime_resume implementation needs to enable the HSM clock for the HDMI controller registers to be functional. However, the HSM clock is part of the HDMI power domain which might not be powered prior to the pm_runtime_resume_and_get() call, so we could end up changing the rate of the HSM clock while its power domain was disabled. We recently changed the backing driver for the RaspberryPi0-3 to clk-raspberrypi though, which doesn't have such restrictions. We can thus move the clk_set_min_rate() after our call to runtime_resume and avoid the access while the power domain is disabled. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-2-d646ff6fb842@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-16drm/vc4: hdmi: Replace hardcoded value by defineMaxime Ripard
The 120MHz value hardcoded in the call to max_t to compute the HSM rate is defined in the driver as HSM_MIN_CLOCK_FREQ, let's switch to it so that it's more readable. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-1-d646ff6fb842@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-16iommu: Fix error unwind in iommu_group_alloc()Jason Gunthorpe
If either iommu_group_grate_file() fails then the iommu_group is leaked. Destroy it on these error paths. Found by kselftest/iommu/iommufd_fail_nth Fixes: bc7d12b91bd3 ("iommu: Implement reserved_regions iommu-group sysfs file") Fixes: c52c72d3dee8 ("iommu: Add sysfs attribyte for domain type") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/0-v1-8f616bee028d+8b-iommu_group_alloc_leak_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16iommu/of: mark an unused function as __maybe_unusedRandy Dunlap
When CONFIG_OF_ADDRESS is not set, there is a build warning/error about an unused function. Annotate the function to quieten the warning/error. ../drivers/iommu/of_iommu.c:176:29: warning: 'iommu_resv_region_get_type' defined but not used [-Wunused-function] 176 | static enum iommu_resv_type iommu_resv_region_get_type(struct device *dev, struct resource *phys, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: a5bf3cfce8cb ("iommu: Implement of_iommu_get_resv_regions()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will@kernel.org> Cc: iommu@lists.linux.dev Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230209010359.23831-1-rdunlap@infradead.org [joro: Improve code formatting] Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-02-16Merge tag 'drm-misc-next-fixes-2023-02-09' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: Contains a number of fixes to vc4 and ivpu. The patches to the probe helpers were cherry-picked from the regular development branch. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y+S6HBmaRJNPYiBG@linux-uq9g
2023-02-16Merge branch 'net-core-commmon-prints-for-promisc'Paolo Abeni
Jesse Brandeburg says: ==================== net/core: commmon prints for promisc Add a print to the kernel log for allmulticast entry and exit, and standardize the print for entry and exit of promiscuous mode. These prints are useful to both user and developer and should have the triggering driver/bus/device info that netdev_info (optionally) gives. ==================== Link: https://lore.kernel.org/r/20230214210117.23123-1-jesse.brandeburg@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/core: refactor promiscuous mode messageJesse Brandeburg
The kernel stack can be more consistent by printing the IFF_PROMISC aka promiscuous enable/disable messages with the standard netdev_info message which can include bus and driver info as well as the device. typical command usage from user space looks like: ip link set eth0 promisc <on|off> But lots of utilities such as bridge, tcpdump, etc put the interface into promiscuous mode. old message: [ 406.034418] device eth0 entered promiscuous mode [ 408.424703] device eth0 left promiscuous mode new message: [ 406.034431] ice 0000:17:00.0 eth0: entered promiscuous mode [ 408.424715] ice 0000:17:00.0 eth0: left promiscuous mode Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/core: print message for allmulticastJesse Brandeburg
When the user sets or clears the IFF_ALLMULTI flag in the netdev, there are no log messages printed to the kernel log to indicate anything happened. This is inexplicably different from most other dev->flags changes, and could suprise the user. Typically this occurs from user-space when a user: ip link set eth0 allmulticast <on|off> However, other devices like bridge set allmulticast as well, and many other flows might trigger entry into allmulticast as well. The new message uses the standard netdev_info print and looks like: [ 413.246110] ixgbe 0000:17:00.0 eth0: entered allmulticast mode [ 415.977184] ixgbe 0000:17:00.0 eth0: left allmulticast mode Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16wifi: brcmfmac: p2p: Introduce generic flexible array frame memberKees Cook
Silence run-time memcpy() false positive warning when processing management frames: memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26) Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via __builtin_dynamic_object_size) doesn't recognize that the union may end with a flexible array, and returns "26" (the fixed size of the union), rather than the remaining size of the allocation. Add an explicit flexible array member and set it as the destination here, so that we get the correct coverage for the memcpy(). [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832 Reported-by: Ard Biesheuvel <ardb@kernel.org> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Brian Henriquez <brian.henriquez@cypress.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: SHA-cyfmac-dev-list@infineon.com Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org [rename 'frame' to 'body'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-16Merge branch 'net-sched-retire-some-tc-qdiscs-and-classifiers'Paolo Abeni
Jamal Hadi Salim says: ==================== net/sched: Retire some tc qdiscs and classifiers The CBQ + dsmark qdiscs and the tcindex + rsvp classifiers have served us for over 2 decades. Unfortunately, they have not been getting much attention due to reduced usage. While we dont have a good metric for tabulating how much use a specific kernel feature gets, for these specific features we observed that some of the functionality has been broken for some time and no users complained. In addition, syzkaller has been going to town on most of these and finding issues; and while we have been fixing those issues, at times it becomes obvious that we would need to perform bigger surgeries to resolve things found while getting a syzkaller fix in place. After some discussion we feel that in order to reduce the maintenance burden it is best to retire them. This patchset leaves the UAPI alone. I could send another version which deletes the UAPI as well. AFAIK, this has not been done before - so it wasnt clear what how to handle UAPI. It seems legit to just delete it but we would need to coordinate with iproute2 (given they sync up with kernel uapi headers). There are probably other users we don't know of that copy kernel headers. If folks feel differently I will resend the patches deleting UAPI for these qdiscs and classifiers. I will start another thread on iproute2 before sending any patches to iproute2. ==================== Link: https://lore.kernel.org/r/20230214134915.199004-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire rsvp classifierJamal Hadi Salim
The rsvp classifier has served us well for about a quarter of a century but has has not been getting much maintenance attention due to lack of known users. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire tcindex classifierJamal Hadi Salim
The tcindex classifier has served us well for about a quarter of a century but has not been getting much TLC due to lack of known users. Most recently it has become easy prey to syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire dsmark qdiscJamal Hadi Salim
The dsmark qdisc has served us well over the years for diffserv but has not been getting much attention due to other more popular approaches to do diffserv services. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire ATM qdiscJamal Hadi Salim
The ATM qdisc has served us well over the years but has not been getting much TLC due to lack of known users. Most recently it has become a shooting target for syzkaller. For this reason, we are retiring it. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net/sched: Retire CBQ qdiscJamal Hadi Salim
While this amazing qdisc has served us well over the years it has not been getting any tender love and care and has bitrotted over time. It has become mostly a shooting target for syzkaller lately. For this reason, we are retiring it. Goodbye CBQ - we loved you. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16kbuild: add a tool to list files ignored by gitMasahiro Yamada
In short, the motivation of this commit is to build a source package without cleaning the source tree. The deb-pkg and (src)rpm-pkg targets first run 'make clean' before creating a source tarball. Otherwise build artifacts such as *.o, *.a, etc. would be included in the tarball. Yet, the tarball ends up containing several garbage files since 'make clean' does not clean everything. Cleaning the tree every time is annoying since it makes the incremental build impossible. It is desirable to create a source tarball without cleaning the tree. In fact, there are some ways to achieve this. The easiest solution is 'git archive'. 'make perf-tar*-src-pkg' uses it, but I do not like it because it works only when the source tree is managed by git, and all files you want in the tarball must be committed in advance. I want to make it work without relying on git. We can do this. Files that are ignored by git are generated files, so should be excluded from the source tarball. We can list them out by parsing the .gitignore files. Of course, .gitignore does not cover all the cases, but it works well enough. tar(1) claims to support it: --exclude-vcs-ignores Exclude files that match patterns read from VCS-specific ignore files. Supported files are: .cvsignore, .gitignore, .bzrignore, and .hgignore. The best scenario would be to use 'tar --exclude-vcs-ignores', but this option does not work. --exclude-vcs-ignore does not understand any of the negation (!), preceding slash, following slash, etc.. So, this option is just useless. Hence, I wrote this gitignore parser. The previous version [1], written in Python, was so slow. This version is implemented in C, so it works much faster. I imported the code from git (commit: 23c56f7bd5f1), so we get the same result. This tool traverses the source tree, parsing all .gitignore files, and prints file paths that are ignored by git. The output is similar to 'git ls-files --ignored --directory --others --exclude-per-directory=.gitignore', except [1] Not sorted [2] No trailing slash for directories [2] is intentional because tar's --exclude-from option cannot handle trailing slashes. [How to test this tool] $ git clean -dfx $ make -s -j$(nproc) defconfig all # or allmodconifg or whatever $ git archive -o ../linux1.tar --prefix=./ HEAD $ tar tf ../linux1.tar | LANG=C sort > ../file-list1 # files emitted by 'git archive' $ make scripts_package HOSTCC scripts/list-gitignored $ scripts/list-gitignored --prefix=./ -o ../exclude-list $ tar cf ../linux2.tar --exclude-from=../exclude-list . $ tar tf ../linux2.tar | LANG=C sort > ../file-list2 # files emitted by 'tar' $ diff ../file-list1 ../file-list2 | grep -E '^(<|>)' < ./Documentation/devicetree/bindings/.yamllint < ./drivers/clk/.kunitconfig < ./drivers/gpu/drm/tests/.kunitconfig < ./drivers/hid/.kunitconfig < ./fs/ext4/.kunitconfig < ./fs/fat/.kunitconfig < ./kernel/kcsan/.kunitconfig < ./lib/kunit/.kunitconfig < ./mm/kfence/.kunitconfig < ./tools/testing/selftests/arm64/tags/ < ./tools/testing/selftests/arm64/tags/.gitignore < ./tools/testing/selftests/arm64/tags/Makefile < ./tools/testing/selftests/arm64/tags/run_tags_test.sh < ./tools/testing/selftests/arm64/tags/tags_test.c < ./tools/testing/selftests/kvm/.gitignore < ./tools/testing/selftests/kvm/Makefile < ./tools/testing/selftests/kvm/config < ./tools/testing/selftests/kvm/settings The source tarball contains most of files that are tracked by git. You see some diffs, but it is just because some .gitignore files are wrong. $ git ls-files -i -c --exclude-per-directory=.gitignore Documentation/devicetree/bindings/.yamllint drivers/clk/.kunitconfig drivers/gpu/drm/tests/.kunitconfig drivers/hid/.kunitconfig fs/ext4/.kunitconfig fs/fat/.kunitconfig kernel/kcsan/.kunitconfig lib/kunit/.kunitconfig mm/kfence/.kunitconfig tools/testing/selftests/arm64/tags/.gitignore tools/testing/selftests/arm64/tags/Makefile tools/testing/selftests/arm64/tags/run_tags_test.sh tools/testing/selftests/arm64/tags/tags_test.c tools/testing/selftests/kvm/.gitignore tools/testing/selftests/kvm/Makefile tools/testing/selftests/kvm/config tools/testing/selftests/kvm/settings [1]: https://lore.kernel.org/all/20230128173843.765212-1-masahiroy@kernel.org/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-16Merge branch 'adding-sparx5-es0-vcap-support'Paolo Abeni
Steen Hegelund says: ==================== Adding Sparx5 ES0 VCAP support This provides the Egress Stage 0 (ES0) VCAP (Versatile Content-Aware Processor) support for the Sparx5 platform. The ES0 VCAP is an Egress Access Control VCAP that uses frame keyfields and previously classified keyfields to add, rewrite or remove VLAN tags on the egress frames, and is therefore often referred to as the rewriter. The ES0 VCAP also supports trapping frames to the host. The ES0 VCAP has 1 lookup accessible with this chain id: - chain 10000000: ES0 Lookup 0 The ES0 VCAP does not do traffic classification to select a keyset, but it does have two keysets that can be used on all traffic. For now only the ISDX keyset is used. The ES0 VCAP can match on an ISDX key (Ingress Service Index) as one of the frame metadata keyfields, similar to the ES2 VCAP. The ES0 VCAP uses external counters in the XQS (statistics) group. ==================== Link: https://lore.kernel.org/r/20230214104049.1553059-1-steen.hegelund@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Add TC vlan action support for the ES0 VCAPSteen Hegelund
This provides these 3 actions for rule in the ES0 VCAP: - action vlan pop - action vlan modify id X priority Y - action vlan push id X priority Y protocol Z Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Add TC support for the ES0 VCAPSteen Hegelund
This enables the TC command to use the Sparx5 ES0 VCAP, and handling of rule links between IS0 and ES0. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Add ES0 VCAP keyset configuration for Sparx5Steen Hegelund
This adds the ES0 VCAP port keyset configuration for Sparx5. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Updated register interface with VCAP ES0 accessSteen Hegelund
This provides access to the ES0 VCAP register targets Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Add ES0 VCAP model and updated KUNIT VCAP modelSteen Hegelund
This provides the VCAP model for the Sparx5 ES0 (Egress Stage 0) VCAP. This VCAP provides rewriting functionality in the egress path. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Improve the error handling for linked rulesSteen Hegelund
Ensure that an error is returned if the VCAP instance was not found. The chain offset (diff) is allowed to be zero as this just means that the user did not request rules to be linked. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Use chain ids without offsets when enabling rulesSteen Hegelund
This improves the check performed on linked rules when enabling or disabling them. The chain id used must be the chain id without the offset used for linking the rules. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Egress VLAN TPID configuration follows IFHSteen Hegelund
This changes the TPID of the egress frames to use the TPID stored in the IFH (internal frame header), which ensures that this is the TPID classified for the frame at ingress. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Clear rule counter even if lookup is disabledSteen Hegelund
The rule counter must be cleared when creating a new rule, even if the VCAP lookup is currently disabled. This ensures that rules located in VCAPs that use external counters (such as Sparx5 IS2 and ES0) will have their counter reset even if the VCAP lookup is not enabled at the moment. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Fixes: 95fa74148daa ("net: microchip: sparx5: Reset VCAP counter for new rules") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-16net: microchip: sparx5: Discard frames with SMAC multicast addressesSteen Hegelund
A valid frame should never use a multicast address as its source MAC address, so discard these invalid frames. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-14 (ice) This series contains updates to ice driver only. Karol extends support for GPIO pins to E823 devices. Daniel Vacek stops processing of PTP packets when link is down. Pawel adds support for BIG TCP for IPv6. Tony changes return type of ice_vsi_realloc_stat_arrays() as it always returns success. Zhu Yanjun updates kdoc stating supported TLVs. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Mention CEE DCBX in code comment ice: Change ice_vsi_realloc_stat_arrays() to void ice: add support BIG TCP on IPv6 ice/ptp: fix the PTP worker retrying indefinitely if the link went down ice: Add GPIO pin support for E823 products ==================== Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15Documentation: core-api: packing: correct spellingRandy Dunlap
Correct spelling problems for Documentation/core-api/packing.rst as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Link: https://lore.kernel.org/r/20230215053738.11562-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15dt-bindings: net: snps,dwmac: Fix snps,reset-delays-us dependencyAndrew Halaney
The schema had snps,reset-delay-us as dependent on snps,reset-gpio. The actual property is called snps,reset-delays-us, so fix this to catch any devicetree defining snsps,reset-delays-us without snps,reset-gpio. Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230214171505.224602-1-ahalaney@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15selftests: forwarding: tc_actions: cleanup temporary files when test is abortedDavide Caratti
remove temporary files created by 'mirred_egress_to_ingress_tcp' test in the cleanup() handler. Also, change variable names to avoid clashing with globals from lib.sh. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/091649045a017fc00095ecbb75884e5681f7025f.1676368027.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: wangxun: Add the basic ethtool interfacesMengyuan Lou
Add the basic ethtool ops get_drvinfo and get_link for ngbe and txgbe. Ngbe implements get_link_ksettings, nway_reset and set_link_ksettings for free using phylib code. The code related to the physical interface is not yet fully implemented in txgbe using phylink code. So do not implement get_link_ksettings, nway_reset and set_link_ksettings in txgbe. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230214091527.69943-1-mengyuanlou@net-swift.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: msg_zerocopy: elide page accounting if RLIM_INFINITYWillem de Bruijn
MSG_ZEROCOPY ensures that pinned user pages do not exceed the limit. If no limit is set, skip this accounting as otherwise expensive atomic_long operations are called for no reason. This accounting is already skipped for privileged (CAP_IPC_LOCK) users. Rely on the same mechanism: if no mmp->user is set, mm_unaccount_pinned_pages does not decrement either. Tested by running tools/testing/selftests/net/msg_zerocopy.sh with an unprivileged user for the TXMODE binary: ip netns exec "${NS1}" sudo -u "{$USER}" "${BIN}" "-${IP}" ... Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230214155740.3448763-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: phy: c45: genphy_c45_an_config_aneg(): fix uninitialized symbol errorOleksij Rempel
Fix warning: drivers/net/phy/phy-c45.c:712 genphy_c45_write_eee_adv() error: uninitialized symbol 'changed' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302150232.q6idsV8s-lkp@intel.com/ Fixes: 022c3f87f88e ("net: phy: add genphy_c45_ethtool_get/set_eee() support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230215050453.2251360-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15net: phy: motorcomm: uninitialized variables in yt8531_link_change_notify()Dan Carpenter
These booleans are never set to false, but are just used without being initialized. Fixes: 4ac94f728a58 ("net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Frank Sae <Frank.Sae@motor-comm.com> Link: https://lore.kernel.org/r/Y+xd2yJet2ImHLoQ@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-27 09:33:31 +0000