Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Two driver fixes:
- Fix the PIO mode configuration of the pdc20230 (pata_legacy)
driver. This also removes a compilation warning with clang and W=1
(Sergey)
- Fix devm_platform_ioremap_resource() return value check in the
palmld driver (Yang)"
* tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: palmld: fix return value check in palmld_pata_probe()
ata: pata_legacy: fix pdc20230_set_piomode()
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Add locking around DKL PHY register accesses (Imre Deak)
- Stop abusing swiotlb_max_segment (Robert Beckett)
- Filter out invalid outputs more sensibly (Ville Syrjälä)
- Setup DDC fully before output init (Ville Syrjälä)
- Simplify intel_panel_add_edid_alt_fixed_modes() (Ville Syrjälä)
- Grab mode_config.mutex during LVDS init to avoid WARNs (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2ODlCGM4nACmzsJ@tursulin-desk
|
|
Add a test case to ensure that released pointer registers will not be
leaked into the map.
Before fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg FAIL
Unexpected success to load!
verification time 67 usec
stack depth 4
processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
peak_states 2 mark_read 1
984/p reference tracking: try to leak released ptr reg OK
Summary: 1 PASSED, 0 SKIPPED, 1 FAILED
After fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg OK
984/p reference tracking: try to leak released ptr reg OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com
|
|
Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.
When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply __mark_reg_unknown() to each relevant register.
It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.
Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.
Fixes: fd978bf7fd31 ("bpf: Add reference tracking to verifier")
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.1-2022-11-02:
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103023257.10446-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix two rarely triggered but long-standing issues"
* tag 'fuse-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add file_modified() to fallocate
fuse: fix readdir cache race
|
|
On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver
does not reset the controller at probe time, because sometimes the system
firmware loads a config and resetting might loose this config.
On the Nanote UMPC-01 device OTOH the config is in flash of the controller,
the controller needs a reset to load this; and the system firmware does not
reset the controller on a cold boot.
To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try
resetting the controller and then re-reading the config when encountering
a config with 0 width/height/max_touch_num value and the controller has
not already been reset by goodix_ts_probe().
This should be safe to do in general because normally we should never
encounter a config with 0 width/height/max_touch_num. Doing this in
general not only avoids the need for a DMI quirk, but also might help
other systems.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
"struct_size() + n" may cause a integer overflow,
use size_add() to handle it.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220927070247.23148-1-yuzhe@nfschina.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A batch of error handling fixes for resource leaks, fixes for nowait
mode in combination with direct and buffered IO:
- direct IO + dsync + nowait could miss a sync of the file after
write, add handling for this combination
- buffered IO + nowait should not fail with ENOSPC, only blocking IO
could determine that
- error handling fixes:
- fix inode reserve space leak due to nowait buffered write
- check the correct variable after allocation (direct IO submit)
- fix inode list leak during backref walking
- fix ulist freeing in self tests"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix inode reserve space leak due to nowait buffered write
btrfs: fix nowait buffered write returning -ENOSPC
btrfs: remove pointless and double ulist frees in error paths of qgroup tests
btrfs: fix ulist leaks in error paths of qgroup self tests
btrfs: fix inode list leak during backref walking at find_parent_nodes()
btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
btrfs: fix lost file sync on direct IO write with nowait and dsync iocb
btrfs: fix a memory allocation failure test in btrfs_submit_direct
|
|
Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to the pidfd test"
* tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd_test: Remove the erroneous ','
selftests: pidfd: Fix compling warnings
ksefltests: pidfd: Fix wait_states: Test terminated by timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix an endian thinko in the asm-generic compat_arg_u64() which led to
syscall arguments being swapped for some compat syscalls.
- Fix syscall wrapper handling of syscalls with 64-bit arguments on
32-bit kernels, which led to syscall arguments being misplaced.
- A build fix for amdgpu on Book3E with AltiVec disabled.
Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.
* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Select ARCH_SPLIT_ARG64
powerpc/32: fix syscall wrappers with 64-bit arguments
asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
|
|
Commit 445d41d7a7c1 ("Merge branch 'slab/for-6.1/kmalloc_size_roundup' into
slab/for-next") resolved a conflict of two concurrent changes to __ksize().
However, it did not adjust the kernel-doc comment of __ksize(), while the
name of the argument to __ksize() was renamed.
Hence, ./scripts/ kernel-doc -none mm/slab_common.c warns about it.
Adjust the kernel-doc comment for __ksize() for make W=1 happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Unlike x86, which has machinery to deal with page faults that occur
during the execution of EFI runtime services, arm64 has nothing like
that, and a synchronous exception raised by firmware code brings down
the whole system.
With more EFI based systems appearing that were not built to run Linux
(such as the Windows-on-ARM laptops based on Qualcomm SOCs), as well as
the introduction of PRM (platform specific firmware routines that are
callable just like EFI runtime services), we are more likely to run into
issues of this sort, and it is much more likely that we can identify and
work around such issues if they don't bring down the system entirely.
Since we already use a EFI runtime services call wrapper in assembler,
we can quite easily add some code that captures the execution state at
the point where the call is made, allowing us to revert to this state
and proceed execution if the call triggered a synchronous exception.
Given that the kernel and the firmware don't share any data structures
that could end up in an indeterminate state, we can happily continue
running, as long as we mark the EFI runtime services as unavailable from
that point on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Prefer our own intel_crtc_needs_modeset() wrapper to
drm_atomic_crtc_needs_modeset() whenever we are dealing
with the intel_ types instead of drm_ types. Makes things
a bit neater in general.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031214037.1636-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
ilk/snb vs. ivb+ hardware is mostly identical except for the addition
of the split gamma mode on ivb. Thus we can share the csc_enable
and gamma_enable calculation for both variants. Pull that stuff
into a few helpers.
Note that this also fills in the missing ctm/degamma stuff into
ilk_color_check() pretty much, so for good measure let's also
add a few extra checks relating to that, although we still don't
expose ctm/degamma to userspace. But now it'll be trivial to do
so if we wish.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Since the pipe CSC sits between the degamma and gamma LUTs there
is no way to make us it for RGB->YCbCr conversion when both LUTs
are also active. Simply reject such combos.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-10-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Apart from the split gamma mode ivb+ LUTs work just like ilk+ LUTs.
So let's handle the special case, and then just fall back to
ilk_gamma_mode() to avoid having to duplicate the same logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Since pre-icl vs. icl+ handle the limited range
output stuff a bit differently it's probably
less confusing if we just pass that information
explicitly into ilk_csc_convert_ctm().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
s/icl_lut_multi_seg_pack/ilk_lut_12p4_pack/ since that's what it is
and group the corresponding "unpack" functions next to it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-7-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Split the EXT2_MAX register programming into its own function.
More in line with the whole "cobble together stuff from small
pieces" approach used in this code.
The EXT(2)_MAX registers are also not really part of the
multi-segment section of the LUT, so hoist the calls to a
higher level, just like we do in other gamma modes as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-6-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
The local variable 'vector' must be u32 rather than u8: see the
struct hv_msi_desc3.
'vector_count' should be u16 rather than u8: see struct hv_msi_desc,
hv_msi_desc2 and hv_msi_desc3.
Fixes: a2bad844a67b ("PCI: hv: Fix interrupt mapping for multi-MSI")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Leaving Microsoft, the Hyper-V drivers have lots of other maintainers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20221028153741.25470-1-stephen@networkplumber.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hyperv_cleanup resets the hypercall page by setting the MSR to 0. However,
the root partition is not allowed to write to the GPA bits of the MSR.
Instead, it uses the hypercall page provided by the MSR. Similar is the
case with the reference TSC MSR.
Clear only the enable bit instead of zeroing the entire MSR to make
the code valid for root partition too.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-3-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add a data structure to represent the reference TSC MSR similar to
other MSRs. This simplifies the code for updating the MSR.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-2-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Unify icl_load_gcmax() with the rest of the function
naming scheme by calling it ivb_load_lut_max() instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Switch intel_color.c over to the modern 'i915' variable
naming scehme. The only exceptions are the i9xx LUT access
functions which still need the magic 'dev_priv' for the
register macros.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
No need to use _MMIO_PIPE2() for SKL_BOTTOM_COLOR
since all pipe registers are evenly spread on skl+.
Switch to _MMIO_PIPE() and thus avoid the hidden dev_priv.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Use sizeof(variable) instead of sizeof(type) in the hopes of
less chance of screwing things up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026113906.10551-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
The gen2 irq functions aren't used outside of i915_irq.h. Make them
static, and remove the useless macro wrappers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b28f45ef4ef69ab7a6f96ffa3fa3118994667332.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e68c71ad1c1c1de7f5bc659edeb208818cddde72.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5949a57979dae615731b6ff54d5d150b91e34d27.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8523aa88daaf2dbf0ce138980142dbcd6d1ae0bc.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a7f41cf6d13ee78c0b3a7c5927680bb94edfc5fb.1667383630.git.jani.nikula@intel.com
|
|
Reduce the size of intel_display.h by moving out the dpio_channel and
dpio_phy enums.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c3ee7a6482540a0267f7b2974d22cab8188707a.1667383630.git.jani.nikula@intel.com
|
|
Simplify the heavy intel_display_types.h header.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/943dd3e9812138b1cf3ddcfde896cfec006f3847.1667383630.git.jani.nikula@intel.com
|
|
This lets us drop the heavy intel_display.h include from intel_sprite.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/16e13b6f207f52f8810a06f71a08e637f6397dc8.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/29b57e168e8af842baad2626959cea258402a2c1.1667383630.git.jani.nikula@intel.com
|
|
Only include what's needed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa1e27284e0ac308938978ae7da9ea9fbacad9e.1667383630.git.jani.nikula@intel.com
|
|
The GPIO enum is only used in intel_gmbus.c, hide it there.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c386ce08d7d53a45c14c2e7519e4cc78a8161be.1667383630.git.jani.nikula@intel.com
|
|
Swap the 1st and 2nd arguments to be consistent with the usage of
kvcalloc().
Fixes: c9b8fecddb5b ("KVM: use kvcalloc for array allocations")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Message-Id: <20221103011749.139262-1-liaochang1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904] dump_stack_lvl+0x84/0xaa
[ 1416.659910] dump_stack+0x10/0x15
[ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955] __se_sys_ioctl+0x77/0xc0
[ 1416.659962] __x64_sys_ioctl+0x1d/0x20
[ 1416.659965] do_syscall_64+0x3d/0x80
[ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com>
Fixes: 36222b117e36 ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Selective update area is now aligned with DSC slice height when
DSC is enabled. Remove inappropriate warning about missing DSC
alignment.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: 47d4ae2192cb ("drm/i915/mtl: Extend PSR support")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7212
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102174544.2288205-3-jouni.hogander@intel.com
|
|
Do not enable psr2 if panel ganularity is not aligned with DSC slice
height when DSC is enabled
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102174544.2288205-2-jouni.hogander@intel.com
|
|
Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:
psock->work.func = sk_psock_backlog()
ACQUIRE psock->work_mutex
sk_psock_handle_skb()
skb_send_sock()
__skb_send_sock()
sendpage_unlocked()
kernel_sendpage()
sock->ops->sendpage = inet_sendpage()
sk->sk_prot->sendpage = tcp_sendpage()
ACQUIRE sk->sk_lock
tcp_sendpage_locked()
RELEASE sk->sk_lock
RELEASE psock->work_mutex
sock_map_close()
ACQUIRE sk->sk_lock
sk_psock_stop()
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
cancel_work_sync()
__cancel_work_timer()
__flush_work()
// wait for psock->work to finish
RELEASE sk->sk_lock
We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.
Fixes: 799aa7f98d53 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com
|
|
With recent sync of linux/in.h tools/include headers are now relying on
__DECLARE_FLEX_ARRAY macro, which isn't itself defined inside
tools/include headers anywhere and is instead assumed to be present in
system-wide UAPI header. This breaks isolated environments that don't
have kernel UAPI headers installed system-wide, like BPF CI ([0]).
To fix this, bring in include/uapi/linux/stddef.h into tools/include.
We can't just copy/paste it, though, it has to be processed with
scripts/headers_install.sh, which has a dependency on scripts/unifdef.
So the full command to (re-)generate stddef.h for inclusion into
tools/include directory is:
$ make scripts_unifdef && \
cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \
scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h
This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds.
[0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609
Fixes: 036b8f5b8970 ("tools headers uapi: Update linux/in.h copy")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org
|
|
__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but
doesn't seem to be explicitly included from include/uapi/linux/in.h,
which breaks BPF selftests builds (once we sync linux/stddef.h into
tools/include directory in the next patch). Fix this by explicitly
including linux/stddef.h.
Given this affects BPF CI and bpf tree, targeting this for bpf tree.
Fixes: 5854a09b4957 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org
|
|
This now matches much better what this is doing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-14-christian.koenig@amd.com
|