| Age | Commit message (Collapse) | Author |
|---|
|
Petr Machata says:
====================
selftests: mlxsw: Stabilize RED tests
Tweak the mlxsw-specific RED selftests to increase stability on
Spectrum-3 and Spectrum-4 machines.
====================
Link: https://patch.msgid.link/cover.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RED test uses a pair of TBF shapers. The first to get predictably-sized
stream of traffic, and second to get a 100% saturated chokepoint. To this
chokepoint it injects individual packets. Because the chokepoint is
saturated, these additional packets go straight to the backlog. This allows
the test to check RED behavior across various queue sizes.
The shapers are rated at 1Gbps, for historical reasons (before mlxsw
supported TBF offload, the test used port speed to create the chokepoints).
Machines with a low-power CPU may have trouble consistently generating
1Gbps of traffic, and the test then spuriously fails.
Instead, drop the rate to 200Mbps (Spectrum has a guaranteed shaper rate
granularity of 200Mbps, so anything lower is not guaranteed to work well).
Because that means fewer packets will be mirrored in the ECN-mark test,
adjust the passing condition accordingly.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c6712f9c5de75ae0bc2ab3d8ea7d92aaaf93af95.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test works by injecting into a port with a maxed-out queue a couple
packets and checks if a corresponding number of packets were dropped. This
has worked well on Spectrum<4, but on Spectrum-4 it has been noisy. This
is in line with the observation that on Spectrum-4, queue size tends to
fluctuate more. A handful of packets could then still be accepted to the
queue even though it was nominally full just recently.
In order to accommodate this behavior, send many more packets. The buffer
can fit N extra packets, but not N% packets. This therefore allows us to
set wider absolute margins, while actually narrowing them relatively.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/abc869b9f6003d400d6293ddd5edb2f4517f44d5.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The qdisc stats are taken from the port's periodic HW stats, which are
updated once a second. We try to accommodate the latency by using busywait
in build_backlog().
The issue in that seems to be that when do_mark_test() builds the backlog,
it makes the decision whether to send more packets based on the first
instance of the queue depth stat exceeding the current value, when in fact
more traffic is on the way and the queue depth would increase further. This
leads to failures in TC 1 of mark-mirror test, where we see the following
failure:
TEST: TC 0: marked packets mirror'd [ OK ]
TEST: TC 1: marked packets mirror'd [FAIL]
Spurious packets (1680 -> 2290) observed without buffer pressure
Fix by waiting for the full second before reading the queue depth for the
first time, to make sure it reflects all in-flight traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/321dcf8b3e9a1f0766429c8cf3e3f1746f1bc375.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. In practice we can
sample queue depth values going from about -12% to about +7% of the
configured RED limit. The test which checks the queue size has a limit of
+-10%, and as a result often fails. We attempted to fix the issue by
busywaiting for several seconds hoping to get within the bounds, but that
still proved to be too noisy (or the wait time would be impractically
long). Unfortunately we have to bump the value tolerance from 10% to 15%,
which in this patch do.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/f54950df2a8fcba46c3ddc1053376352fa2e592b.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. Increasing the
desired backlog seems to help, as the constant fluctuations do not overlap
into the territory where packets are marked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/0821fb3aa8bb6a6c0d3000baab04995517c9a0cc.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fold the separate call to clk_set_rate() into the clock getter.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241007134100.107921-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chtls_set_tcb_tflag() has been unused since 2021's commit
827d329105bf ("chtls: Remove invalid set_tcb call")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241007004652.150065-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cfsrvl_getphyid() has been unused since 2011's commit
f36214408470 ("caif: Use RCU and lists in cfcnfg.c for managing caif link layers")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241007004456.149899-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let it be tuned in per netns by admins.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241005222609.94980-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a cached FID bitmap. This mitigates the need to walk all VTU entries
to find the next free FID.
When flushing the VTU (during init), zero the FID bitmap. Use and
manipulate this bitmap from now on, instead of reading HW for the FID
map.
The repeated VTU walks are costly and can take ~40 mins if ~4000 vlans
are added. Caching the FID map reduces this time to <2 mins.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241006212905.3142976-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for netdev-genl, allowing users to query IRQ, NAPI, and queue
information.
After this patch is applied, note the IRQ assigned to my NIC:
$ cat /proc/interrupts | grep enp0s8 | cut -f1 --delimiter=':'
18
Note the output from the cli:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 513, 'ifindex': 2, 'irq': 18}]
This device supports only 1 rx and 1 tx queue, so querying that:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 513, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 513, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for netdev-genl, allowing users to query IRQ, NAPI, and queue
information.
After this patch is applied, note the IRQs assigned to my NIC:
$ cat /proc/interrupts | grep ens | cut -f1 --delimiter=':'
50
51
52
While e1000e allocates 3 IRQs (RX, TX, and other), it looks like e1000e
only has a single NAPI, so I've associated the NAPI with the RX IRQ (50
on my system, seen above).
Note the output from the cli:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 145, 'ifindex': 2, 'irq': 50}]
This device supports only 1 rx and 1 tx queue. so querying that:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 145, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Duplicated register initialization codes exist in e1000_configure_tx()
and e1000_configure_rx().
For example, writel(0, tx_ring->head) writes 0 to tx_ring->head, which
is adapter->hw.hw_addr + E1000_TDH(0).
This initialization is already done in ew32(TDH(0), 0).
ew32(TDH(0), 0) is equivalent to __ew32(hw, E1000_TDH(0), 0). It
executes writel(0, hw->hw_addr + E1000_TDH(0)). Since variable hw is
set to &adapter->hw, it is equal to writel(0, tx_ring->head).
We can remove similar four writel() in e1000_configure_tx() and
e1000_configure_rx().
commit 0845d45e900c ("e1000e: Modify Tx/Rx configurations to avoid
null pointer dereferences in e1000_open") has introduced these
writel(). This commit moved register writing to
e1000_configure_tx/rx(), and as result, it caused duplication in
e1000_configure_tx/rx().
This patch modifies the sequence of register writing, but removing
these writes is safe because the same writes were already there before
the commit.
I also have checked the datasheets [0] [1] and have not found any
description that we need to write RDH, RDT, TDH and TDT registers
twice at initialization. Furthermore, we have tested this patch on an
I219-V device physically.
Link: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/82577-gbe-phy-datasheet.pdf [0]
Link: https://www.intel.com/content/www/us/en/content-details/613460/intel-82583v-gbe-controller-datasheet.html [1]
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Takamitsu Iwai <takamitz@amazon.co.jp>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
e1000_init_function_pointers_82575() is never implemented and used since
commit 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver").
And commit 9835fd7321a6 ("igb: Add new function to read part number from
EEPROM in string format") removed igb_read_part_num() implementation.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since commit fff292b47ac1 ("ice: add VF representors one by one")
ice_eswitch_configure() is not used anymore.
Commit 1b8f15b64a00 ("ice: refactor filter functions") removed
ice_vsi_cfg_mac_fltr() but leave declaration.
Commit a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for
XDP_TX") leave ice_xmit_xdp_buff() declaration.
Commit 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C
products") declared ice_phy_cfg_{rx,tx}_offset_eth56g(),
commit a1ffafb0b4a4 ("ice: Support configuring the device to Double
VLAN Mode") declared ice_pkg_buf_get_free_space(), and
commit 8a3a565ff210 ("ice: add admin commands to access cgu
configuration") declared ice_is_pca9575_present(), but all these never
be implemented.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.
Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-2-1de0daca2d42%40linux.intel.com
|
|
Opportunistic SYSEXIT executes VERW to clear CPU buffers after user EFLAGS
are restored. This can clobber user EFLAGS.ZF.
Move CLEAR_CPU_BUFFERS before the user EFLAGS are restored. This ensures
that the user EFLAGS.ZF is not clobbered.
Closes: https://lore.kernel.org/lkml/yVXwe8gvgmPADpRB6lXlicS2fcHoV5OHHxyuFbB_MEleRPD7-KhGe5VtORejtPe-KCkT8Uhcg5d7-IBw4Ojb4H7z5LQxoZylSmJ8KNL3A8o=@protonmail.com/
Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition")
Reported-by: Jari Ruusu <jariruusu@protonmail.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-1-1de0daca2d42%40linux.intel.com
|
|
HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1.
This fixes HDMI hotplug/output detection.
See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240715230311.685641-1-flokli@flokli.de
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Sporadic issues, such as PHY access loss, have been observed on I219 (19)
devices. It was found that these devices have hardware more closely
related to ADP than MTP and the issues were caused by taking MTP-specific
flows.
Change the MAC and board types of these devices from MTP to ADP to
correctly reflect the LAN hardware, and flows, of these devices.
Fixes: db2d737d63c5 ("e1000e: Separate MTP board type from ADP")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
[ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down
[ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0
[ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000
[ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000
[ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message
[ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported.
[ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message
[ T292] pcieport 0000:00:1c.5: AER: broadcast resume message
[ T292] ------------[ cut here ]------------
[ T292] kernel BUG at net/core/dev.c:6539!
[ T292] invalid opcode: 0000 [#1] PREEMPT SMP
[ T292] RIP: 0010:napi_enable+0x37/0x40
[ T292] Call Trace:
[ T292] <TASK>
[ T292] ? die+0x33/0x90
[ T292] ? do_trap+0xdc/0x110
[ T292] ? napi_enable+0x37/0x40
[ T292] ? do_error_trap+0x70/0xb0
[ T292] ? napi_enable+0x37/0x40
[ T292] ? napi_enable+0x37/0x40
[ T292] ? exc_invalid_op+0x4e/0x70
[ T292] ? napi_enable+0x37/0x40
[ T292] ? asm_exc_invalid_op+0x16/0x20
[ T292] ? napi_enable+0x37/0x40
[ T292] igb_up+0x41/0x150
[ T292] igb_io_resume+0x25/0x70
[ T292] report_resume+0x54/0x70
[ T292] ? report_frozen_detected+0x20/0x20
[ T292] pci_walk_bus+0x6c/0x90
[ T292] ? aer_print_port_info+0xa0/0xa0
[ T292] pcie_do_recovery+0x22f/0x380
[ T292] aer_process_err_devices+0x110/0x160
[ T292] aer_isr+0x1c1/0x1e0
[ T292] ? disable_irq_nosync+0x10/0x10
[ T292] irq_thread_fn+0x1a/0x60
[ T292] irq_thread+0xe3/0x1a0
[ T292] ? irq_set_affinity_notifier+0x120/0x120
[ T292] ? irq_affinity_notify+0x100/0x100
[ T292] kthread+0xe2/0x110
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork+0x2d/0x50
[ T292] ? kthread_complete_and_exit+0x20/0x20
[ T292] ret_from_fork_asm+0x11/0x20
[ T292] </TASK>
To fix this issue igb_io_resume() checks if the interface is running and
the device is not down this means igb_io_error_detected() did not bring
the device down and there is no need to bring it up.
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
Fixes: fed0d9f13266 ("i40e: Fix VF's MAC Address change on VM")
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add jump targets so that a bit of exception handling can be better reused
at the end of two function implementations.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We have for some time the assign_bit() API to replace open coded
if (foo)
set_bit(n, bar);
else
clear_bit(n, bar);
Use this API to clean the code. No functional change intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The max_frame and rx_buf_len fields of the VSI set the maximum frame size
for packets on the wire, and configure the size of the Rx buffer. In the
hardware, these are per-queue configuration. Most VSI types use a simple
method to determine the size of the buffers for all queues.
However, VFs may potentially configure different values for each queue.
While the Linux iAVF driver does not do this, it is allowed by the virtchnl
interface.
The current virtchnl code simply sets the per-VSI fields inbetween calls to
ice_vsi_cfg_single_rxq(). This technically works, as these fields are only
ever used when programming the Rx ring, and otherwise not checked again.
However, it is confusing to maintain.
The Rx ring also already has an rx_buf_len field in order to access the
buffer length in the hotpath. It also has extra unused bytes in the ring
structure which we can make use of to store the maximum frame size.
Drop the VSI max_frame and rx_buf_len fields. Add max_frame to the Rx ring,
and slightly re-order rx_buf_len to better fit into the gaps in the
structure layout.
Change the ice_vsi_cfg_frame_size function so that it writes to the ring
fields. Call this function once per ring in ice_vsi_cfg_rxqs(). This is
done over calling it inside the ice_vsi_cfg_rxq(), because
ice_vsi_cfg_rxq() is called in the virtchnl flow where the max_frame and
rx_buf_len have already been configured.
Change the accesses for rx_buf_len and max_frame to all point to the ring
structure. This has the added benefit that ice_vsi_cfg_rxq() no longer has
the surprise side effect of updating ring->rx_buf_len based on the VSI
field.
Update the virtchnl ice_vc_cfg_qs_msg() function to set the ring values
directly, and drop references to the removed VSI fields.
This now makes the VF logic clear, as the ring fields are obviously
per-queue. This reduces the required cognitive load when reasoning about
this logic.
Note that removing the VSI fields does leave a 4 byte gap, but the ice_vsi
structure has many gaps, and its layout is not as critical in the hot path.
The structure may benefit from a more thorough repacking, but no attempt
was made in this change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vc_cfg_qs_msg() function is used to configure VF queues in response
to a VIRTCHNL_OP_CONFIG_VSI_QUEUES command.
The virtchnl command contains an array of queue pair data for configuring
Tx and Rx queues. This data includes a queue ID. When configuring the
queues, the driver generally uses this queue ID to determine which Tx and
Rx ring to program. However, a handful of places use the index into the
queue pair data from the VF. While most VF implementations appear to send
this data in order, it is not mandated by the virtchnl and it is not
verified that the queue pair data comes in order.
Fix the driver to consistently use the q_idx field instead of the 'i'
iterator value when accessing the rings. For the Rx case, introduce a local
ring variable to keep lines short.
Fixes: 7ad15440acf8 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E830 adds hardware support to prevent the VF from overflowing the PF
mailbox with VIRTCHNL messages. E830 will use the hardware feature
(ICE_F_MBX_LIMIT) instead of the software solution ice_is_malicious_vf().
To prevent a VF from overflowing the PF, the PF sets the number of
messages per VF that can be in the PF's mailbox queue
(ICE_MBX_OVERFLOW_WATERMARK). When the PF processes a message from a VF,
the PF decrements the per VF message count using the E830_MBX_VF_DEC_TRIG
register.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable ethtool reset support. Ethtool reset flags are mapped to the
E810 reset type:
PF reset:
$ ethtool --reset <ethX> irq dma filter offload
CORE reset:
$ ethtool --reset <ethX> irq-shared dma-shared filter-shared \
offload-shared ram-shared
GLOBAL reset:
$ ethtool --reset <ethX> irq-shared dma-shared filter-shared \
offload-shared mac-shared phy-shared ram-shared
Calling the same set of flags as in PF reset case on port representor
triggers VF reset.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Increasing MSI-X value on a VF leads to invalid memory operations. This
is caused by not reallocating some arrays.
Reproducer:
modprobe ice
echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe
echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs
echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count
Default MSI-X is 16, so 17 and above triggers this issue.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
Read of size 8 at addr ffff8888b937d180 by task bash/28433
(...)
Call Trace:
(...)
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
kasan_report+0xed/0x120
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_cfg_def+0x3360/0x4770 [ice]
? mutex_unlock+0x83/0xd0
? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice]
? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vf_reconfig_vsi+0x114/0x210 [ice]
ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice]
sriov_vf_msix_count_store+0x21c/0x300
(...)
Allocated by task 28201:
(...)
ice_vsi_cfg_def+0x1c8e/0x4770 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vsi_setup+0x179/0xa30 [ice]
ice_sriov_configure+0xcaa/0x1520 [ice]
sriov_numvfs_store+0x212/0x390
(...)
To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This
causes the required arrays to be reallocated taking the new queue count
into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq
before ice_vsi_rebuild(), so that realloc uses the newly set queue
count.
Additionally, ice_vsi_rebuild() does not remove VSI filters
(ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer
necessary.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Triggering the reset while in switchdev mode causes
errors[1]. Rules are already removed by this time
because switch content is flushed in case of the reset.
This means that rules were deleted from HW but SW
still thinks they exist so when we get
SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to
delete not existing rule.
We can avoid these errors by clearing the rules
early in the reset flow before they are removed from HW.
Switchdev API will get notified that the rule was removed
so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification.
Remove unnecessary ice_clear_sw_switch_recipes.
[1]
ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2
ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2
Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support")
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
netif_is_ice() works by checking the pointer to netdev ops. However, it
only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops,
so in Safe Mode it always returns false, which is unintuitive. While it
doesn't look like netif_is_ice() is currently being called anywhere in Safe
Mode, this could change and potentially lead to unexpected behaviour.
Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If DDP package is missing or corrupted, the driver should enter Safe Mode.
Instead, an error is returned and probe fails.
To fix this, don't exit init if ice_init_ddp_config() returns an error.
Repro:
* Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg)
* Load ice
Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using
free lists and spinlock, and we can use an additional tag to
determine whether the nvmet_rdma_rsp is extra allocated.
In addition, performance has improved:
1. testing environment is local rxe rdma devie and mem-based
backstore device.
2. fio command, test the average 5 times:
fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1
-size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16
-iodepth=128 -bs=4k -group_reporting
3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
There's no need for "future" extensions in an internal
struct, and we don't need a u32 for flags, use just a
u8. Also remove the unused IW_DESCR_FLAG_WAIT flag.
Link: https://patch.msgid.link/20241007220003.309bd52fa763.I9a1229fa7f2be53d4f50e63671ed441d0968bb41@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Simplify this, and also add a comment at the #endif.
Link: https://patch.msgid.link/20241007215025.5ecdad1e02ed.I54efa895efc496e06ba41e1c39c9df9e23b0171f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- ops.enqueue() didn't have a way to tell whether select_task_rq_scx()
and thus ops.select() were skipped. Some schedulers were incorrectly
using SCX_ENQ_WAKEUP. Add SCX_ENQ_CPU_SELECTED and fix scx_qmap using
it.
- Remove a spurious WARN_ON_ONCE() in scx_cgroup_exit()
- Fix error information clobbering during load
- Add missing __weak markers to BPF helper declarations
- Doc update
* tag 'sched_ext-for-6.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Documentation: Update instructions for running example schedulers
sched_ext, scx_qmap: Add and use SCX_ENQ_CPU_SELECTED
sched/core: Add ENQUEUE_RQ_SELECTED to indicate whether ->select_task_rq() was called
sched/core: Make select_task_rq() take the pointer to wake_flags instead of value
sched_ext: scx_cgroup_exit() may be called without successful scx_cgroup_init()
sched_ext: Improve error reporting during loading
sched_ext: Add __weak markers to BPF helper function decalarations
|
|
This no longer needs to be exported, so don't export it.
Link: https://patch.msgid.link/20241007214715.3dd736dc3ac0.I1388536e99c37f28a007dd753c473ad21513d9a9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Given the previous patches, we no longer need the
struct iw_public_data etc., it's only used by the
old Intel drivers (and ps3_gelic creates it but
then doesn't use it). Remove all of that, including
the pointer in struct net_device.
Link: https://patch.msgid.link/20241007213525.8b2d52b60531.I6a27aaf30bded9a0977f07f47fba2bd31a3b3330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
CFG80211_WEXT_EXPORT is no longer needed, if we only make
ipw2200 return the static name for SIOCGIWNAME itself.
Link: https://patch.msgid.link/20241007211431.8d4a7242ce92.I66ceb885ddfa52c368feeea1ea884bf988c525f2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no driver left using this other than ipw2200,
so move the data bookkeeping and code into libipw.
Link: https://patch.msgid.link/20241007210254.037d864cda7d.Ib2197cb056ff05746d3521a5fba637062acb7314@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The key_free LSM hook has been removed.
Remove the corresponding BPF hook.
Avoid warnings during the build:
BTFIDS vmlinux
WARN: resolve_btfids: unresolved symbol bpf_lsm_key_free
Fixes: 5f8d28f6d7d5 ("lsm: infrastructure management of the key security blob")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241005-lsm-key_free-v1-1-42ea801dbd63@weissschuh.net
|
|
No longer document drivers should switch to lib80211,
they really should never have done that. While at it,
also remove the recommendation to use cfg80211, if it
switches to mac80211 then it implicitly uses cfg80211
but doesn't need to do anything about that, normally.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241007202707.87481ddcfc00.I2cfb9940807e9c5017a052efcd3d1f2b6dc15fb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's already much code in libipw that used to be shared
with more drivers, but now with the prior cleanups, those old
Intel ipw2x00 drivers are also the only ones using whatever is
now left of lib80211. Move lib80211 entirely into libipw.
Link: https://patch.msgid.link/20241007202707.915ef7b9e7c7.Ib9876d2fe3c90f11d6df458b16d0b7d4bf551a8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This driver is using lib80211 and any driver that plans to ever
leave staging should never have done that, so remove the driver
to enable cleaning up lib80211 into libipw inside the old Intel
drivers.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241007202707.d0e59cdd2cdc.I8e4d74a6e1d09eefe1f5e2e208735ba2ccef1d4f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
