| Age | Commit message (Collapse) | Author |
|---|
|
- Apple Magic Mouse 2 support from John Chen
|
|
- Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from
Hans de Goede
|
|
- LED fixes and Thinkpad X1 Tablet keyboard support, from Hans de Goede
|
|
- Cleanups to ACPI handling in i2c-hid driver from Andy Shevchenko
|
|
- Support for FTDI FT260 I2C host adapter from Michael Zaidman
|
|
- Mute LED support fixes for Elantech driver from Hans de Goede
|
|
- hiddev_connect() return value fix from Jason Gerecke
|
|
This is the capacity in percentage, relative to design capacity.
Specifically, it is present in Apple Magic Mouse 2.
In contrast, usage 00850064 is also the capacity in percentage, but is
relative to full capacity. It is not mapped here because I don't have
such device.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It is observed that the Magic Mouse 2 would not enter multi-touch mode
unless the mouse is connected before loading the module. It seems to be
a quirk specific to Magic Mouse 2
Retrying after 500ms fixes the problem for me. The delay can't be
reduced much further --- 300ms didn't work for me. Retrying immediately
after receiving an event didn't work either.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It is observed that, with 3 button emulation, when middle button is
clicked, either the left button or right button is clicked as well. It
is caused by hidinput "correctly" acting on the event, oblivious to the
3 button emulation.
As raw_event has taken care of everything, no further processing is
needed. However, the only way to stop at raw_event is to return an error
(negative) value. Therefore, the processing is stopped at event instead.
[jkosina@suse.cz: fix comment style]
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Bluetooth device
Vendor 004c (Apple)
Device 0269 (Magic Mouse 2)
Add support for Apple Magic Mouse 2, putting the device in multi-touch
mode.
Co-authored-by: Rohit Pidaparthi <rohitpid@gmail.com>
Co-authored-by: RicardoEPRodrigues <ricardo.e.p.rodrigues@gmail.com>
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Thinkpad X1 Tablet Thin keyboard's HID interface for the media-keys
and other special functions, is quite similar to the Thinkpad 10 ultrabook
keyboard's mouse/media-keys HID interface.
The only difference is that it needs a bit different key mappings.
Add support for the mute-LED and the non-standard media-keys on this
keyboard by re-using the tp10_ultrabook_kbd code combined with a new
lenovo_input_mapping_x1_tab_kbd() function.
Co-authored-by: Alexander Kobel <a-kobel@a-kobel.de>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Instead of looking for a hdev with a type of HID_TYPE_USBMOUSE find
the interface for the mute/mic-mute/fn-lock LEDs by checking for the
output-report which is used to set them.
This is a preparation patch for adding support for the LEDs on the
X1 tablet thin keyboard which uses the same output-report, but has
a separate (third) USB interface for the touchpad/mouse functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The mute and mic-mute LEDs should be automatically turned on/off based
on the audio-card's mixer settings.
Add the standardized default-trigger names for this, so that the alsa
code can turn the LEDs on/off as appropriate (on supported audio cards).
This brings the mute/mic-mute LED support inline with the thinkpad_acpi
support for the same LEDs in keyboards directly connected to the
laptop's embedded-controller.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Mapping the mic-mute button to KEY_MICMUTE is technically correct but
KEY_MICMUTE translates to a scancode of 256 (248 + 8) under X,
which does not fit in 8 bits, so it does not work.
Because of this userspace is expecting KEY_F20 instead,
theoretically KEY_MICMUTE should work under Wayland but even
there it does not work, because the desktop-environment is
listening only for KEY_F20 and not for KEY_MICMUTE.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The LEDs can only by turned on/off, so max_brightness should be set to 1.
Without this the max_brightness sysfs-attribute will report 255 which is
wrong.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The led_classdev already contains a cached value of the last set
brightness, the brightness_get callback is only meant for LED drivers
which can read back the actual / current brightness from the hardware.
Since lenovo_led_brightness_get() just returns the last set value
it does not add any functionality, so we can just remove it.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The HID lenovo probe function only attaches drvdata to one of the
USB interfaces, but lenovo_event() will get called for all USB interfaces
to which hid-lenovo is bound.
This allows a malicious device to fake being a device handled by
hid-lenovo, which generates events for which lenovo_event() has
special handling (and thus dereferences hid_get_drvdata()) on another
interface triggering a NULL pointer exception.
Add a check for hid_get_drvdata() returning NULL, avoiding this
possible NULL pointer exception.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix the following issues with lenovo_led_set_tp10ubkbd() error handling:
1. On success hid_hw_raw_request() returns the number of bytes sent.
So we should check for (ret != 3) rather then for (ret != 0).
2. Actually propagate errors to the caller.
3. Since the LEDs are part of an USB keyboard-dock the mute LEDs can go
away at any time. Don't log an error when ret == -ENODEV and set the
LED_HW_PLUGGABLE flag to avoid errors getting logged when the USB gets
disconnected.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The lenovo_led_brightness_set function may sleep, so we should have the
the led_class_dev's brightness_set_blocking callback point to it, rather
then the regular brightness_set callback.
When toggled through sysfs this is not a problem, but the brightness_set
callback may be called from atomic context when using LED-triggers.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The led_classdev already contains a cached value of the last set
brightness, the brightness_get callback is only meant for LED drivers
which can read back the actual / current brightness from the hardware.
Since elan_mute_led_get_brigtness() just returns the last set value
it does not add any functionality, so we can just remove it.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The mute LED should be automatically turned on/off based
on the audio-card's mixer settings.
Add the standardized default-trigger name for this, so that the alsa
code can turn the LED on/off as appropriate (on supported audio cards).
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Being integrated into an USB keyboard-dock the mute LED can go away
at any time, leading to the following errors:
[ 918.667671] elan 0003:04F3:0755.0002: Failed to set mute led brightness: -19
[ 918.667737] leds elan:red:mute: Setting an LED's brightness failed (-19)
Fix this by making the following changes:
1. Don't log an error from elan_mute_led_set_brigtness() when
ret == -ENODEV
2. Set the LED_HW_PLUGGABLE flag on the mute LED led_classdev
While at it also make sure that elan_mute_led_set_brigtness() returns
an error (-EIO) when ret != 3 but it is not an error (>= 0).
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The "len" variable is uninitialize.
Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.
Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"
Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Tested-by: Juan Garrido <Juan.Garrido@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The FTDI FT260 chip implements USB to I2C/UART bridges through two
USB HID class interfaces. The first - for I2C, and the second for UART.
Each interface is independent, and the kernel detects it as a separate
USB hidraw device.
This commit adds I2C host adapter support.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Tested-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some BIOS-es do not initialize the activestatus bits of the AMD_P2C_MSG3
register. This cause the AMD_SFH driver to not register any sensors even
though the laptops in question do have sensors.
Add a DMI quirk-table for specifying sensor-mask overrides based on
DMI match, to make the sensors work OOTB on these laptop models.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add a sensor_mask module parameter which can be used to override the
sensor-mask read from the activestatus bits of the AMD_P2C_MSG3
registers. Some BIOS-es do not program the activestatus bits, leading
to the AMD-SFH driver not registering any HID devices even though the
laptop in question does actually have sensors.
While at it also fix the wrong indentation of the MAGNO_EN define.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Suggested-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This value is only used once inside amd_mp2_get_sensor_num(),
so there is no need to store this in the amd_mp2_dev struct,
amd_mp2_get_sensor_num() can simple use a local variable for this.
Fixes: 4f567b9f8141 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix the following coccicheck warnings:
./drivers/hid/wacom_wac.c:2536:2-6: WARNING: Assignment of
0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In lk 5.11.0-rc2 connecting a USB based Silicon Labs HID to I2C
bridge evaluation board (CP2112EK) causes this warning:
gpio gpiochip0: (cp2112_gpio): detected irqchip that is shared
with multiple gpiochips: please fix the driver
Simply copy what other gpio related drivers do to fix this
particular warning: replicate the struct irq_chip object in each
device instance rather than have a static object which makes that
object (incorrectly) shared by each device.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When input_register_device() fails, no error return code is assigned.
To fix this bug, ret is assigned with -ENOENT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some new 2021 version of ASUS gamer laptops are using an updated
N-Key keyboard with the PID of 0x19b6. This version is using the
same init sequence and brightness control as the 0x1866 keyboard.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The only caller of this function only cares about gross success/failure
but we still might as well resolve the following smatch warning and fix
the other error paths as well:
hiddev.c:894 hiddev_connect() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with
a different version of the quad/bt2.0 combo receivers shipped with the
MX5000 and MX5500 keyboards. These receivers are compatible with one
another, e.g. the Dinovo Edge keyboard can be paired with the MX5000
receiver.
Like the MX5x00 receivers in HID proxy mode these receivers present
themselves as a hub with multiple USB-HID devices, one for the keyboard
and one for the mouse.
Where they differ is that the mouse USB-device has 2 input reports for
reporting mice events. It has the exact same INPUT(2) report as the
MX5x00 receivers, but it also has a second INPUT(5) mouse report which
is different; and when the Dinovo receivers are paired with the Dinovo
keyboards the second INPUT(5) mouse report is actually used for events
on the builtin touchpad.
Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers
in HID proxy mode to logitech-dj, like we already do for the similar
MX5000 and MX5500 receivers.
This adds battery monitoring functionality (through logitech-hidpp) and
fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not
working on the Dinovo Edge.
Note these receivers present themselves as a hub with 2 separate USB
devices for the keyboard and mouse; and the logitech-dj code needs to
bind to both devices (just as with the MX5x00 receivers).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
devices
The logitech-dj code already uses hid-ids.h defines for almost all devices
it supports. Lets be consistent: add and use hid-ids.h defines for the
G700, MX5000 and MX5500 receivers too.
Also add / update some comments to make the comment style in the
hid_device_id table consistent too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add 1 additional hammer-like device.
Signed-off-by: Shou-Chieh Hsu <shouchieh@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The driver depends on ACPI, ACPI_PTR() resolution is always the same.
Otherwise a compiler may produce a warning.
That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or
none should be used in a driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move static GUID variable out of the function and add a comment
how it looks like in the human readable representation.
While at it, include uuid.h since the guid_t type is defined in it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Switch to the new style i2c-driver probe_new probe function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Currently the ACPI companion and handle are retrieved and checked
a few times in different functions. Instead get ACPI companion only
once and reuse it everywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
|
|
Commit 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool") enabled
building fdtoverlay, but failed to add it to .gitignore.
Also add a note to keep hostprogs in sync with .gitignore.
Fixes: 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Log space and revoke accounting rework to fix some failed asserts.
- Local resource group glock sharing for better local performance.
- Add support for version 1802 filesystems: trusted xattr support and
'-o rgrplvb' mounts by default.
- Actually synchronize on the inode glock's FREEING bit during withdraw
("gfs2: fix glock confusion in function signal_our_withdraw").
- Fix parallel recovery of multiple journals ("gfs2: keep bios separate
for each journal").
- Various other bug fixes.
* tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (49 commits)
gfs2: Don't get stuck with I/O plugged in gfs2_ail1_flush
gfs2: Per-revoke accounting in transactions
gfs2: Rework the log space allocation logic
gfs2: Minor calc_reserved cleanup
gfs2: Use resource group glock sharing
gfs2: Allow node-wide exclusive glock sharing
gfs2: Add local resource group locking
gfs2: Add per-reservation reserved block accounting
gfs2: Rename rs_{free -> requested} and rd_{reserved -> requested}
gfs2: Check for active reservation in gfs2_release
gfs2: Don't search for unreserved space twice
gfs2: Only pass reservation down to gfs2_rbm_find
gfs2: Also reflect single-block allocations in rgd->rd_extfail_pt
gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
gfs2: Add trusted xattr support
gfs2: Enable rgrplvb for sb_fs_format 1802
gfs2: Don't skip dlm unlock if glock has an lvb
gfs2: Lock imbalance on error path in gfs2_recover_one
gfs2: Move function gfs2_ail_empty_tr
gfs2: Get rid of current_tail()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"Percpu had a cleanup come in that makes use of the cpu bitmask helpers
instead of the current iterative approach.
This clean up then had an adverse interaction when clang's inlining
sensitivity is changed such that not all sites are inlined resulting
in modpost being upset with section mismatch due to percpu setup being
marked __init.
That was fixed by introducing __flatten to compiler_attributes.h"
* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: fix clang modpost section mismatch
percpu: reduce the number of cpu distance comparisons
|
|
The removal of EXPORT_UNUSED_SYMBOL() in commit 367948220fce looks like
(and was sold as) a no-op, but it actually had a rather serious and
subtle side effect: the UNUSED_SYMBOLS option not only enabled the
removed (unused) functionality, it also _disabled_ the TRIM_UNUSED_KSYMS
functionality.
And it turns out that TRIM_UNUSED_KSYMS is a huge time waste, and takes
up a third of the kernel build time for me. For no actual upside, since
no distro is likely to ever be able to enable it (because they all
support external kernel modules).
Rather than re-enable EXPORT_UNUSED_SYMBOL, this just disables the
TRIM_UNUSED_KSYMS option by marking it broken. I'm tempted to just
remove the support entirely, but maybe somebody has a use-case and can
fix the behavior of it.
I could have just disabled it for COMPILE_TEST, but it really smells
like the TRIM_UNUSED_KSYMS option is badly done and not really useful,
so this takes the more direct approach - let's see if anybody ever
actually notices or complains.
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jessica Yu <jeyu@kernel.org>
Fixes: 367948220fce ("module: remove EXPORT_UNUSED_SYMBOL*")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
|
|
Pull microblaze updates from Michal Simek:
- Fix DTB alignment
- Remove code for very old GCC versions
- Remove TRACING_SUPPORT selection
* tag 'microblaze-v5.12' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix built-in DTB alignment to be 8-byte aligned
microblaze: Remove support for gcc < 4
microblaze: do not select TRACING_SUPPORT directly
|
|
In gfs2_ail1_flush, we're using I/O plugging to give the block layer a
better chance of merging I/O requests. If we're too aggressive here, we
can end up waiting on I/O to complete while still plugged. Fix that in
a way similar to writeback_sb_inodes, except that we can't use
blk_flush_plug because blk_flush_plug_list is not exported.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
