summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-04USB: serial: cp210x: return early on unchanged termiosJohan Hovold
Return early from set_termios() in case no relevant terminal settings have changed. This avoids testing each parameter in turn and specifically allows the line-control handling to be cleaned up further. Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-04mt76: attempt to free up more room when filling the tx queueFelix Fietkau
Run dma cleanup immediately if the queue is almost full, instead of waiting for the tx interrupt Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: stop queues when running out of tx tokensFelix Fietkau
Avoids packet drops under load with lots of stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: improve tx queue stop/wakeFelix Fietkau
Instead of stopping and waking only a single queue, handle all phy tx queues mapped ot the same hardware queue. Also allow the driver to block tx queues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix memory leak in mt7915_mcu_get_rx_rate()Shayne Chen
Free the skb to prevent memory leak. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: fix rdd mcu cmd endiannessLorenzo Bianconi
Similar to mt7915 driver, fix mt7615 radar mcu command endianness Fixes: 2ce73efe0f8e5 ("mt76: mt7615: initialize radar specs from host driver") Fixes: 70911d9638069 ("mt76: mt7615: add radar pattern test knob to debugfs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix endian issuesFelix Fietkau
Multiple MCU messages were using u16/u32 fields without endian annotations or conversions Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: get rid of dbdc debugfs knobLorenzo Bianconi
mt7915 automatically detects dbdc feature so drop debugfs knob. Move if_comb, mt7915_rates, if_limits structs and mt7915_regd_notifier(), mt7915_init_wiphy() routines at the begging of init.c in order to make mt7915_register_ext_phy routine static Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: introduce dbdc supportLorenzo Bianconi
Introduce mt7915 dbdc support. If dbdc is available, mt7915 primary phy will work on 2.4GHz band, while secondary one on 5GHz band. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move band allocation in mt76_register_phyLorenzo Bianconi
This is a preliminary patch to introduce dbdc support to mt7915 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_phy in mt76_init_sband_2g and mt76_init_sband_5gLorenzo Bianconi
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move band capabilities in mt76_phyLorenzo Bianconi
This is a preliminary patch to move properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move tx hw data queues in mt76_phyLorenzo Bianconi
Move hw data queues in mt76_phy from mt76_dev since mt7915 supports per phy hw queues in dbdc mode Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mcu queues to mt76_dev q_mcu arrayLorenzo Bianconi
Move mcu queue to a dedicated array q_mcu in mt76_dev structure. This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_queue in tx_queue_skb_raw signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: introduce mt76_init_mcu_queue utility routineLorenzo Bianconi
Introduce mt76_init_mcu_queue utility routine in order to allocate dedicate q_mcu pointers for mcu hw queues. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_queue in tx_queue_skb signatureLorenzo Bianconi
Rely on mt76_queue instead of qid in tx_queue_skb signature. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: dma: rely on mt76_queue in mt76_dma_tx_cleanup signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: rely on mt76_queue in mt7663s_tx_run_queue signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc for mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: rely on mt76_queue in mt76s_process_tx_queue signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc for mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: introduce mt76s_alloc_tx_queueLorenzo Bianconi
This is a preliminary patch to move hw data queues in mt76_phy for mt7915 dbdc support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mt76_init_tx_queue in common codeLorenzo Bianconi
Move mt76_init_tx_queue in mac80211.c since it is shared by all drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: rely on eeprom definitionsLorenzo Bianconi
In order to make the code more readable, rely on mt7915_eeprom_field definitions for eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: refactor usb/sdio rate codeLorenzo Bianconi
Since wtbl workqueue is used only for rate handling, refactor code to make it more clear Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: support 16 interfacesRyder Lee
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY. Note that two PHYs share global 32 omac slots with each other. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: remove unused mt7915_mcu_bss_sync_tlv()Ryder Lee
mt7915_mcu_bss_sync_tlv() is no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: use BIT_ULL for omac_idxRyder Lee
The omac_idx variable is u64 so we should use the 64-bit BIT_ULL(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: make mt7915_eeprom_read staticLorenzo Bianconi
Make mt7915_eeprom_read routine static since it is used only in eeprom.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set tx frequency offset in testmodeShayne Chen
Support to set tx frequency offset in testmode, which is usally used in the pre-calibration stage. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set txpower in testmodeShayne Chen
Support tx_power setting in testmode. Note that the tx power value of antenna 1-3 equal to antenna 0. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode rx supportShayne Chen
Support testmode rx and display rx statistic by parsing RXV packet type, which is currently only enabled in testmode. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode tx supportShayne Chen
Support testmode tx for MT7915A, including tx streams and HE rate settings. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: add support for HE rate modesShayne Chen
Extend enum mt76_testmode_tx_mode to support various HE rate modes. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix tx rate related fields in tx descriptorShayne Chen
Correct the bitfields of tx rateval and bw in tx descriptor. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: add support for LTF and GI combinations for HE modeShayne Chen
Prepare for setting different LTF (1x, 2x, and 4x) and GI (0.8us, 1.6us, 3.2us) combinations in HE rate mode. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: add tx_rate_stbc parameterShayne Chen
Add the parameter to control STBC function in testmode. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: add snr attribute in rx statisticsShayne Chen
Support to display snr value when dumping rx statistics. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: switch ib and wb rssi to array type for per-antenna reportShayne Chen
Change ib_rssi and wb_rssi into array type, since they could be reported by per-antenna. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt76u: use dedicated thread for status workLorenzo Bianconi
Split tx and status path in mt76-usb module relying on mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt76u: rely on woker APIs for rx workLorenzo Bianconi
In order to improve parallelism, convert rx path in mt76-usb module to mt76 workers APIs Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: run key configuration in mt7615_set_key for usb/sdio devicesLorenzo Bianconi
Since rate configuration is run holding dev mutex, we can run key configuration in mt7615_set_key for usb/sdio devices avoiding to schedule the workqueue Tested-by: Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix tkip configuration for mt7615/7663 devicesLorenzo Bianconi
Fix Tx-Rx MIC overwrite during TKIP hw key configuration Fixes: 01cfc1b45421 ("mt76: mt7615: add BIP_CMAC_128 cipher support") Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: switch to wep sw crypto for mt7615/mt7915Lorenzo Bianconi
Switch to wep sw crypto for mt7615/mt7915 since wtbl require a sta reference and wep key is not pairwise Tested-by: YN Chen <yn.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: introduce WoW support via GPIOSean Wang
SDIO-based WiFi would rely on an additional GPIO pin to wake up the host. Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mt76_mcu_send_firmware in common moduleLorenzo Bianconi
Move mt76_mcu_send_firmware routine in common code since it is actually shared between mt7615, mt7663, mt7603 and mt7915 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7603: add additional EEPROM chip IDDavid Bauer
Some newer MT7628 based routers (notably the TP-Link Archer C50 v4) are shipped with a chip-id of 0x7600 in the on-flash EEPROM. Add this as a possible valid ID. Ref: https://bugs.openwrt.org/index.php?do=details&task_id=2781 Suggested-by: Ron Asimi <ron.asimi@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: fix memory leak if device probing failsLorenzo Bianconi
Run mt76_free_device instead of ieee80211_free_hw if device probing fails in order to remove the already allocated mt76 workqueue Fixes: a86f1d01f5ce5 ("mt76: move mt76 workqueue in common code") Fixes: f1d962369d568 ("mt76: mt7915: implement HE per-rate tx power support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix sparse warning cast from restricted __le16Ryder Lee
drivers/net/wireless/mediatek/mt76/mt7915/init.c:339:26: sparse: sparse: cast from restricted __le16 Fixes: 00b2e16e0063 ("mt76: mt7915: add TxBF capabilities") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driverMichal Simek
Xilinx ZynqMP has 3 mio banks and all of them are valid. That's why also list the first one which is missing. Property is enumeration not range. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5fa17dfe4b42abefd84b4cbb7b8bcd4d31398f40.1606914986.git.michal.simek@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-30 06:50:44 +0000