| Age | Commit message (Collapse) | Author |
|---|
|
If both ftl.ko and gluebi.ko are loaded, the notifier of ftl
triggers NULL pointer dereference when trying to access
‘gluebi->desc’ in gluebi_read().
ubi_gluebi_init
ubi_register_volume_notifier
ubi_enumerate_volumes
ubi_notify_all
gluebi_notify nb->notifier_call()
gluebi_create
mtd_device_register
mtd_device_parse_register
add_mtd_device
blktrans_notify_add not->add()
ftl_add_mtd tr->add_mtd()
scan_header
mtd_read
mtd_read_oob
mtd_read_oob_std
gluebi_read mtd->read()
gluebi->desc - NULL
Detailed reproduction information available at the Link [1],
In the normal case, obtain gluebi->desc in the gluebi_get_device(),
and access gluebi->desc in the gluebi_read(). However,
gluebi_get_device() is not executed in advance in the
ftl_add_mtd() process, which leads to NULL pointer dereference.
The solution for the gluebi module is to run jffs2 on the UBI
volume without considering working with ftl or mtdblock [2].
Therefore, this problem can be avoided by preventing gluebi from
creating the mtdblock device after creating mtd partition of the
type MTD_UBIVOLUME.
Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1]
Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2]
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com
|
|
The initial description contained a typo.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231218130656.9020-1-wahrenst@gmx.net
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.8, part two
Convert all drivers platform remove callback to the "remove_new" which
returns void. Usual rationale from Uwe:
The .remove() callback for a platform driver returns an int which
makes many driver authors wrongly assume it's possible to do error
handling by returning an error code. However the value returned is
ignored (apart from emitting a warning) and this typically results in
resource leaks.
* tag 'memory-controller-drv-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
Link: https://lore.kernel.org/r/20231221101956.16351-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.8
Few improvements for Tegra Memory Controller: Override the SID
programming in the device, if firmware or bootloader left it in bypass
mode, e.g. after resuming from suspend. Skip prorgamming the SID, if
given Memory Controller client does not support it.
* tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: Protect SID override call under CONFIG_IOMMU_API
memory: tegra: Skip SID programming if SID registers aren't set
memory: tegra: Add SID override programming for MC clients
Link: https://lore.kernel.org/r/20231213061523.4803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V cache drivers for v6.8
The SiFive composable cache driver moves to the cache driver
subdirectory from the drivers/soc and grows support for non-coherent
cache operations. The immediate user for these is the jh7100 SoC, that
a rake of people have on VisionFive v1 or Beagle-V Starlight boards.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: errata: Make ERRATA_STARFIVE_JH7100 depend on !DMA_DIRECT_REMAP
riscv: errata: Add StarFive JH7100 errata
soc: sifive: ccache: Add StarFive JH7100 support
dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible
soc: sifive: shunt ccache driver to drivers/cache
Link: https://lore.kernel.org/r/20231221-catatonic-monday-d4c61283b136@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC drivers for v6.8
There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: add auto-update driver to mpfs entry
firmware: microchip: Replace of_device.h with explicit include
firmware: microchip: add PolarFire SoC Auto Update support
soc: microchip: mpfs: add auto-update subdev to system controller
soc: microchip: mpfs: print service status in warning message
soc: microchip: mpfs: enable access to the system controller's flash
dt-bindings: soc: microchip: add a property for system controller flash
firmware_loader: Expand Firmware upload error codes with firmware invalid error
Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.8:
- meson-sm: unmap out_base shmem in error path
- meson-sm: use dev_groups attrs for sysfs entries
* tag 'amlogic-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson-sm: unmap out_base shmem in error path
firmware: meson_sm: refactor serial sysfs entry via dev_groups attrs
Link: https://lore.kernel.org/r/a987f881-1c23-4528-9cb1-e5a875b7e7a8@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/drivers
mvebu drivers for 6.8 (part 1)
moxtet bus fixes
* tag 'mvebu-drivers-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
bus: moxtet: Add spi device table
bus: moxtet: Mark the irq as shared
Link: https://lore.kernel.org/r/87il4sbym0.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC driver changes for v6.8
1. Add support for Google GS101 SoC to different drivers: clock
controller, serial and watchdog.
The clock driver changes depend on few bindings headers, which I put
in a topic branch with the bindings refactoring and GS101 support,
therefore this this pull request includes that bindings topic branch.
The rest of the bindings topic branch is not necessary here, however
keeping everything together makes it easier to share between
branches. The bindings topic branch is mostly refactoring all the
compatibles to add SoC-specific compatible followed by fallback.
2. Exynos ChipID: recognize ExynosAutov920.
* tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (40 commits)
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
watchdog: s3c2410_wdt: Add support for Google gs101 SoC
watchdog: s3c2410_wdt: Update QUIRK macros to use BIT macro
watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit
tty: serial: samsung: Add gs101 compatible and common fifoszdt_serial_drv_data
clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support
clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix
dt-bindings: soc: samsung: usi: add google,gs101-usi compatible
dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property
dt-bindings: serial: samsung: Add google-gs101-uart compatible
dt-bindings: watchdog: Document Google gs101 watchdog bindings
dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
dt-bindings: clock: Add Google gs101 clock management unit bindings
dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
dt-bindings: serial: samsung: add specific compatible for Tesla FSD
dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
...
Link: https://lore.kernel.org/r/20231220084722.22149-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.8
Support for SM8650 and X1E is added to the LLCC driver, the
LLCC_TRP_ATTR2_CFGn register stride is corrected, and a bug where for
each iteration looping over slices previous settings for dis_cap_alloc
and retain_on_pc are overwritten.
A quirk is introduced in UCSI, for implementations that does not handle
UCSI_GET_PDOS for non-PD partners. With this, USCI support is enabled by
default in pmic_glink. It is later reverted for SC8280XP due reported
errors.
A few memory leaks in error paths of qseecom are taken care of.
A small driver to expose the ADSP PDCharger ULOG debug log is
introduced, to aid debugging issues with pmic_glink.
The identiy of SM8650, PM8937 and a few DSPs are added to the Qualcomm
socinfo driver.
The Qualcomm sleep stats driver is extended to allow getting detailed
statistics about usage of various DDR states. Unfortunately this ABI
does not seem to be stable across platforms, so this addition is dropped
again while the reported problems are investigated further.
Andy is moved from MAINTAINERS to CREDITS. Thank you, Andy.
* tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (34 commits)
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
MAINTAINERS: qcom: move Andy Gross to credits
soc: qcom: pmic_glink: drop stray semicolons
soc: qcom: pmic_glink: disable UCSI on sc8280xp
soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration
soc: qcom: pmic_pdcharger_ulog: Fix hypothetical ulog request message endianess
soc: qcom: pmic_pdcharger_ulog: Move TRACE_SYSTEM out of #if protection
soc: qcom: pmic_pdcharger_ulog: Search current directory for headers
soc: qcom: socinfo: Add few DSPs to get their image details
soc: qcom: llcc: Add missing description for members in slice config
Revert "soc: qcom: stats: Add DDR sleep stats"
dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs
soc: qcom: socinfo: Add PM8937 Power IC
soc: qcom: llcc: Add configuration data for X1E80100
dt-bindings: cache: qcom,llcc: Add X1E80100 compatible
soc: qcom: pmic_glink_altmode: fix port sanity check
...
Link: https://lore.kernel.org/r/20231219041855.732578-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.8
- ti_sci: Minor fixup for off by one error in debugfs_create
- k3-socinfo: Refactoring and add j721e detection, j722s
* tag 'ti-driver-soc-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Add JTAG ID for J722S
soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
firmware: ti_sci: Fix an off-by-one in ti_sci_debugfs_create()
Link: https://lore.kernel.org/r/20231218153043.r5psxbjjpccusjg4@september
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
arm64: ZynqMP SoC changes for 6.8
power driver:
- Move to remove_new hook
- Report error around unsupported callback
- Fix long messages
event driver:
- Fix cpu_id handling
- Fix warning message
* tag 'zynqmp-soc-for-6.8' of https://github.com/Xilinx/linux-xlnx:
soc: xilinx: Add error message for invalid payload received from IPI callback.
soc: xilinx: fix unhandled SGI warning message
soc: xilinx: fix quoted string split across lines
soc: xilinx: Fix for call trace due to the usage of smp_processor_id()
soc/xilinx: zynqmp_power: Convert to platform remove callback returning void
Link: https://lore.kernel.org/r/CAHTX3dJ=6y=vEgmH7Qqe=6TJZT=D-egKDmLLER4fS0=OHJRGZA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Parse netlink attribute containing the chain type in this update, to
bail out if this is different from the existing type.
Otherwise, it is possible to define a chain with the same name, hook and
priority but different type, which is silently ignored.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
conntrack zones are heavily used by tools like openvswitch to run
multiple virtual "routers" on a single machine. In this context each
conntrack zone matches to a single router, thereby preventing
overlapping IPs from becoming issues.
In these systems it is common to operate on all conntrack entries of a
given zone, e.g. to delete them when a router is deleted. Previously this
required these tools to dump the full conntrack table and filter out the
relevant entries in userspace potentially causing performance issues.
To do this we reuse the existing CTA_ZONE attribute. This was previous
parsed but not used during dump and flush requests. Now if CTA_ZONE is
set we filter these operations based on the provided zone.
However this means that users that previously passed CTA_ZONE will
experience a difference in functionality.
Alternatively CTA_FILTER could have been used for the same
functionality. However it is not yet supported during flush requests and
is only available when using AF_INET or AF_INET6.
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Co-developed-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Max Lamprecht <max.lamprecht@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers change for 6.8:
- Change imx-weim bus driver to use device_get_match_data()
* tag 'imx-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: Use device_get_match_data()
Link: https://lore.kernel.org/r/20231216064605.876196-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.8
- Remove duplicate setup of soc_device_attribute.family,
- Make RZ/Five depend on !DMA_DIRECT_REMAP.
* tag 'renesas-drivers-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Make RZ/Five depend on !DMA_DIRECT_REMAP
soc: renesas: Remove duplicate setup of soc_device_attribute.family
Link: https://lore.kernel.org/r/cover.1702642340.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates for v6.8
This adds a refactoring of the MediaTek Smart Voltage Scaling (SVS)
driver and the addition of support for MT8186 and MT8195 in it, and
adds support for the MT8188 VDOSYS and resets in the MMSYS driver.
* tag 'mtk-soc-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (24 commits)
soc: mediatek: mtk-svs: Constify runtime-immutable members of svs_bank
soc: mediatek: mtk-svs: Use ULONG_MAX to compare floor frequency
soc: mediatek: mtk-svs: Check if SVS mode is available in the beginning
soc: mediatek: mtk-svs: Cleanup of svs_probe() function
soc: mediatek: mtk-svs: Compress of_device_id entries
soc: mediatek: mtk-svs: Remove redundant print in svs_get_efuse_data
soc: mediatek: mtk-svs: Commonize MT8192 probe function for MT8186
soc: mediatek: mtk-svs: Drop supplementary svs per-bank pointer
soc: mediatek: mtk-svs: Commonize efuse parse function for most SoCs
soc: mediatek: mtk-svs: Move t-calibration-data retrieval to svs_probe()
soc: mediatek: mtk-svs: Add SVS-Thermal coefficient to SoC platform data
soc: mediatek: mtk-svs: Add a map to retrieve fused values
soc: mediatek: mtk-svs: Change the thermal sensor device name
soc: mediatek: mtk-svs: Reduce memory footprint of struct svs_bank
soc: mediatek: mtk-svs: Build bank name string dynamically
soc: mediatek: mtk-svs: Convert sw_id and type to enumerations
soc: mediatek: mtk-svs: Subtract offset from regs_v2 to avoid conflict
soc: mediatek: Add MT8188 VDOSYS reset bit map
soc: mediatek: Support reset bit mapping in mmsys driver
soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys
...
Link: https://lore.kernel.org/r/20231212114515.121695-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If a transaction is aborted, we should mark the to-be-released NEWSET dead,
just like commit path does for DEL and DESTROYSET commands.
In both cases all remaining elements will be released via
set->ops->destroy().
The existing abort code does NOT post the actual release to the work queue.
Also the entire __nf_tables_abort() function is wrapped in gc_seq
begin/end pair.
Therefore, async gc worker will never try to release the pending set
elements, as gc sequence is always stale.
It might be possible to speed up transaction aborts via work queue too,
this would result in a race and a possible use-after-free.
So fix this before it becomes an issue.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Place the read-mostly parts accessed by the datapath first.
In particular, we do access ->flags member (to see if HW offload
is enabled) for every single packet, but this is placed in the 5th
cacheline.
priority could stay where it is, but move it too to cover a hole.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No need to use GFP_ATOMIC here.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set expressions' dump callbacks are not concurrency-safe per-se with
reset bit set. If two CPUs reset the same element at the same time,
values may underrun at least with element-attached counters and quotas.
Prevent this by introducing dedicated callbacks for nfnetlink and the
asynchronous dump handling to serialize access.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This is a wrapper around nft_ctx_init() for use in
nf_tables_getsetelem() and a resetting equivalent introduced later.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The function is not supposed to alter the set, passing the pointer as
const is fine and merely requires to adjust signatures of two called
functions as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
soc/drivers
PowerQUICC QMC and TSA drivers updates for v6.8
This pull request contains updates to prepare the support for the QMC
HDLC driver.
- Perform some fixes
- Add support for child devices
- Add QMC dynamic timeslot support
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE kernel private shared memory optimizations
Optimize OP-TEE driver private shared memory allocated as dynamic shared
memory. Both to handle larger than one page allocations and for more
efficient memory usage.
* tag 'kern-priv-shm-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: allocate shared memory with alloc_pages_exact()
optee: add page list to kernel private shared memory
Link: https://lore.kernel.org/r/20231211115815.GA616539@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE: asynchronous notifications with FF-A
Add support for asynchronous notifications in the OP-TEE FF-A driver. This
is the FF-A counterpart to the asynchronous notifications already
available in the OP-TEE SMC ABI.
* tag 'ffa-notif-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: ffa_abi: add asynchronous notifications
optee: provide optee_do_bottom_half() as a common function
Link: https://lore.kernel.org/r/20231211105249.GA587253@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE add reserved system thread
Add support for a reserved system thread in the SMC-ABI of the OP-TEE driver.
SCMI with OP-TEE transport uses this to guarantee that it will always have
a thread available in the secure world.
* tag 'system-thread-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
firmware: arm_scmi: optee: use optee system invocation
tee: optee: support tracking system threads
tee: system session
tee: optee: system thread call property
Link: https://lore.kernel.org/r/20231211102600.GA571787@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
HiSilicon driver updates for v6.8
- Add support for the platform with PCC type3 and interrupt ack
- Few cleanups and improvements: correct the format of some strings and domain typo,
add failure log
* tag 'hisi-drivers-for-6.8' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Support the platform with PCC type3 and interrupt ack
doc: kunpeng_hccs: Fix incorrect email domain name
soc: hisilicon: kunpeng_hccs: Remove an unused blank line
soc: hisilicon: kunpeng_hccs: Add failure log for no _CRS method
soc: hisilicon: kunpeng_hccs: Fix some incorrect format strings
Link: https://lore.kernel.org/r/6572C41B.6050703@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/arm
mvebu arm for 6.8 (part 1)
Update MAINTAINRES entries for Marvell MBus driver
* tag 'mvebu-arm-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
MAINTAINERS: add Marvell MBus driver to Marvell EBU SoCs support
Link: https://lore.kernel.org/r/87r0jgbyz4.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC change for 6.8:
- Update mach-imx MMDC driver to use device_get_match_data().
- Drop the use of "fsl,clkctrl" from mach-mxs platform code, as it's
an undocumented compatible.
* tag 'imx-soc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: mxs: Do not search for "fsl,clkctrl"
ARM: imx: Use device_get_match_data()
Link: https://lore.kernel.org/r/20231216064605.876196-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip AT91 SoC updates for v6.8
It contains:
- one patch for secure mode to set the target power management mode in
initialization process as at91_pm_begin() is not called on suspend
path while in secure mode; this is necessary for different drivers to
know which suspend mode the system is going to switch to and act
accordingly
* tag 'at91-soc-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: set soc_pm.data.mode in at91_pm_secure_init()
Link: https://lore.kernel.org/r/20231214174830.3045180-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/arm
Maintainer update for drivers/bus/omap* files
Add for drivers/bus/omap* files to the omap section in the
MAINTAINERS file.
* tag 'omap-for-v6.8/maintainers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
MAINTAINERS: add omap bus drivers to OMAP2+ SUPPORT
Link: https://lore.kernel.org/r/pull-1702037869-295608@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Correct all kernel-doc notation to repair warnings that are
reported by scripts/kernel-doc:
memmap.c:38: warning: No description found for return value of '__efi_memmap_init'
memmap.c:82: warning: No description found for return value of 'efi_memmap_init_early'
memmap.c:132: warning: Function parameter or member 'addr' not described in 'efi_memmap_init_late'
memmap.c:132: warning: Excess function parameter 'phys_addr' description in 'efi_memmap_init_late'
memmap.c:132: warning: No description found for return value of 'efi_memmap_init_late'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.7-rc6
Here are some new modem device ids and a rename of a few ftdi product id
defines.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.7-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EG912Y module support
USB: serial: ftdi_sio: update Actisense PIDs constant names
USB: serial: option: add Quectel RM500Q R13 firmware support
USB: serial: option: add Foxconn T99W265 with new baseline
|
|
Tetsuo Handa pointed out that in the (now reverted)
lockdep commit I initialized the data too late. The
same is true for the cancellation data, it must be
initialized before the cmpxchg(), otherwise it may
be done twice and possibly even overwriting data in
there already when there's a race. Fix that, which
also requires destroying the mutex in case we lost
the race.
Fixes: 8c88a474357e ("debugfs: add API to allow debugfs operations cancellation")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231221150444.1e47a0377f80.If7e8ba721ba2956f12c6e8405e7d61e154aa7ae7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There isn't really much left in xfs_rtallocate_extent now, fold it into
the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There are currently multiple levels of fall back if an RT allocation
can not be satisfied:
1) xfs_rtallocate_extent extends the minlen and reduces the maxlen due
to the extent size hint. If that can't be done, it return -ENOSPC
and let's xfs_bmap_rtalloc retry, which then not only drops the
extent size hint based alignment, but also the minlen adjustment
2) if xfs_rtallocate_extent gets -ENOSPC from the underlying functions,
it only drops the extent size hint based alignment and retries
3) if that still does not succeed, xfs_rtallocate_extent drops the
extent size hint (which is a complex no-op at this point) and the
minlen using the same code as (1) above
4) if that still doesn't success and the caller wanted an allocation
near a blkno, drop that blkno hint.
The handling in 1 is rather inefficient as we could just drop the
alignment and continue, and 2/3 interact in really weird ways due to
the duplicate policy.
Move aligning the min and maxlen out of xfs_rtallocate_extent and into
a helper called directly by xfs_bmap_rtalloc. This allows just
continuing with the allocation if we have to drop the alignment instead
of going through the retry loop and also dropping the perfectly usable
minlen adjustment that didn't cause the problem, and then just use
a single retry that drops both the minlen and alignment requirement
when we really are out of space, thus consolidating cases (2) and (3)
above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_rtalloc is a bit of a mess in terms of calculating the locally
need variables. Reorder them a bit so that related code is located
next to each other - the raminlen calculation moves up next to where
the maximum len is calculated, and all the prod calculation is move
into a single place and rearranged so that the real prod calculation
only happens when it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use the kernel min/max helpers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_format.h has a bunch odd wrappers for helper functions and mount
structure access using RT* prefixes. Replace them with their open coded
versions (for those that weren't entirely unused) and remove the wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtallocate_extent_size has two loops with nearly identical logic
in them. Split that logic into a separate xfs_rtalloc_sumlevel helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use common code for both xfs_rtallocate_range calls by moving
the !isfree logic into the non-default branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use a goto to use a common tail for the case of being able to allocate
an extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Change polarity of a check so that the successful case of being able to
allocate an extent is in the main path of the function and error handling
is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Doing a break in the else side of a conditional is rather silly. Invert
the check, break ASAP and unindent the other leg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Inline the logic of xfs_rtmodify_summary_int into xfs_rtmodify_summary
and xfs_rtget_summary instead of having a somewhat awkward helper to
share a little bit of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtmodify_summary_int is only used inside xfs_rtbitmap.c and to
implement xfs_rtget_summary. Move xfs_rtget_summary to xfs_rtbitmap.c
as the exported API and mark xfs_rtmodify_summary_int static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Clean up the logical in xfs_bmap_rtalloc that tries to find a rtextent
to start the search from by using a separate variable for the hint, not
calling xfs_bmap_adjacent when we want to ignore the locality and avoid
an extra roundtrip converting between block numbers and RT extent
numbers.
As a side-effect this doesn't pointlessly call xfs_rtpick_extent and
increment the start rtextent hint if we are going to ignore the result
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add a return value to xfs_bmap_adjacent to indicate if it did change
ap->blkno or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Reorder the tail end of xfs_bmap_rtalloc so that the successfully
allocation is in the main path, and the error handling is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
