summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-21ASoC: rt5645: Refactor rt5645_parse_dt()Hans de Goede
Refactor rt5645_parse_dt(), make it take a pointer to struct rt5645_platform_data as argument instead of passing in the complete rt5645_priv struct. While at it also make it void since it always succeeds. This is a preparation patch for factoring the code to get the platform-data out into a separate helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21ASoC: rt5645: Add platform-data for Acer Switch V 10Hans de Goede
The Acer Switch V 10 uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like other models following Intel's Braswell's reference design. Add a DMI quirk pointing to the intel_braswell_platform_data for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21ASoC: rt5645: Drop double EF20 entry from dmi_platform_data[]Hans de Goede
dmi_platform_data[] first contains a DMI entry matching: DMI_MATCH(DMI_PRODUCT_NAME, "EF20"), and then contains an identical entry except for the match being: DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), Since these are partial (non exact) DMI matches the first match will also match any board with "EF20EA" in their DMI product-name, drop the second, redundant, entry. Fixes: a4dae468cfdd ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series") Cc: Chris Chiu <chiu@endlessos.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 socValentin Caron
Add support for the STM32MP25: - Burst should not be enabled with the new DMA used on STM32MP25. - STM32MP25 SPI8 has a limited feature set, it can only send words of 8 or 16 bits and with a maximum words number of 1024. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://msgid.link/r/20231218155721.359198-4-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21dt-bindings: spi: stm32: add st,stm32mp25-spi compatibleValentin Caron
Add st,stm32mp25-spi compatible in dt-bindings. STM32MP25 spi is similar to the STM32H7 except for the following two points: - Burst should not be enabled with the new DMA used on STM32MP25. - STM32MP25 SPI8 has a limited feature set, it can only send words of 8 or 16 bits and with a maximum words number of 1024. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://msgid.link/r/20231218155721.359198-3-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21spi: stm32: use dma_get_slave_caps prior to configuring dma channelAlain Volmat
First check the dma channel capabilities (max burst) before configuring the dma channel. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://msgid.link/r/20231218155721.359198-2-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21rust: support `srctree`-relative linksMiguel Ojeda
Some of our links use relative paths in order to point to files in the source tree, e.g.: //! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h) /// [`struct mutex`]: ../../../../include/linux/mutex.h These are problematic because they are hard to maintain and do not support `O=` builds. Instead, provide support for `srctree`-relative links, e.g.: //! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h) /// [`struct mutex`]: srctree/include/linux/mutex.h The links are fixed after `rustdoc` generation to be based on the absolute path to the source tree. Essentially, this is the automatic version of Tomonori's fix [1], suggested by Gary [2]. Suggested-by: Gary Guo <gary@garyguo.net> Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Closes: https://lore.kernel.org/r/20231026.204058.2167744626131849993.fujita.tomonori@gmail.com [1] Fixes: 48fadf440075 ("docs: Move rustdoc output, cross-reference it") Link: https://lore.kernel.org/rust-for-linux/20231026154525.6d14b495@eugeo/ [2] Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20231215235428.243211-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21rust: sync: Makes `CondVar::wait()` an uninterruptible waitBoqun Feng
Currently, `CondVar::wait()` is an interruptible wait, and this is different than `wait_event()` in include/linux/wait.h (which is an uninterruptible wait). To avoid confusion between different APIs on the interruptible/uninterruptible, make `CondVar::wait()` an uninterruptible wait same as `wait_event()`, also rename the old `wait()` to `CondVar::wait_interruptible()`. Spotted-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Tiago Lam <tiagolam@gmail.com> Link: https://lore.kernel.org/r/20231214200421.690629-1-boqun.feng@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21wifi: iwlwifi: replace ENOTSUPP with EOPNOTSUPPAndrei Otcheretianski
ENOTSUPP isn't a standard error code, don't use it. Replace with EOPNOTSUPP instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: use the new command to clear the internal bufferEmmanuel Grumbach
The firmware can allow to clear the internal debug buffer. This can be used to sanitize the data when requested to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.99aed3efbacb.Ib5bda1d1ff4bae476667737d4081ad066d1d7e6b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: disallow puncturing in US/CanadaJohannes Berg
For now, this isn't allowed. The API to mac80211 isn't great for this, but we need to change the API to move puncturing into the chanctx/chandef, and will do it better then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: add US/Canada MCC to APIJohannes Berg
We don't want to duplicate the definitions later, so add them to the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6595e905997b.I12354d31676911b29ab30c81a4e9b87f59284d3b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Add rf_mapping of new wifi7 devicesMukesh Sisodiya
Add the CSR register details for new wifi7 devices and correctly set rf_name for devices with FM and WP radios. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a9c04b1e9d13.Ibf258d5e6370d8840a2560282988a1c26377c410@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: cleanup BT Shared Single Antenna codeMiri Korenblit
We don't support such device. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6e6961ac0ac5.I923024eac20efd24a5b42332d8e73ae756e0469a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: assign phy_ctxt before eSR activationMiri Korenblit
eSR is activated when a chanctx is assigned to more than one link. During eSR activation we should disable RLC for both phys, and configure the FW with a special phy command for both phys. Currently we assign the phy_ctxt to the link only after eSR activation, so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW. Fix this by first assigning the new phy_ctxt to the link and then doing the eSR activation. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: fix out of bound copy_from_userAnjaneyulu
The driver copies the userspace buffer into an internal NUL byte terminated buffer. While doing so, it was reading beyond the end of the userspace buffer, overwriting its own NUL termination in the process. Fix this by only copying the correct number of bytes. Fixes: 3f244876ef73 ("wifi: iwlwifi: make debugfs entries link specific") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Do not warn if valid link pair was not foundIlan Peer
It is possible that though multiple links are enabled we cannot enabled EMLSR enable more than a single link, e.g., all valid links are on the same band etc. Thus, do not warn in case no valid link pair is found. Fixes: b9be67fb4207 ("wifi: iwlwifi: mvm: Add basic link selection logic") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: d3: avoid intermediate/early mutex unlockJohannes Berg
Now with the mac80211 locking model changed, we no longer can cause any bad dependencies here between mvm->mutex and other mutexes in mac80211, so we no longer need to drop the mutex early or even temporarily. Clean this up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.1f2f5289ecc6.I7e3b8e806b6d50e88ba0c26767da8261806eb9c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: send TX path flush in rfkillJohannes Berg
If we want to drop packets, that's surely a good thing to do when we want to enter rfkill. Send this command despite rfkill so we can successfully clean up everything, we need to handle it separately since it has CMD_WANT_SKB, so it's not going to automatically return success when in rfkill. Fixes: d4e3a341b87b ("iwlwifi: mvm: add support for new flush queue response") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Don't mark DFS channels as NO-IRAndrei Otcheretianski
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR. For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while cfg80211 doesn't really expect NO-IR on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Allow DFS concurrent operationAndrei Otcheretianski
AX210 devices allow concurrent P2P operation on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS requestJohannes Berg
The firmware changed their mind, don't set the chains to zero, instead set them to 1 as we normally would for connections to APs that don't use MIMO. Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: add a driver callback to check active_linksMiri Korenblit
During ieee80211_set_active_links() we do (among the others): 1. Call drv_change_vif_links() with both old_active and new_active 2. Unassign the chanctx for the removed link(s) (if any) 3. Assign chanctx to the added link(s) (if any) 4. Call drv_change_vif_links() with the new_active links bitmap The problem here is that during step #1 the driver doesn't know whether we will activate multiple links simultaneously or are just doing a link switch, so it can't check there if multiple links are supported/enabled. (Some of the drivers might enable/disable this option dynamically) And during step #3, in which the driver already knows that, returning an error code (for example when multiple links are not supported or disabled), will cause a warning, and we will still complete the transition to the new_active links. (It is hard to undo things in that stage, since we released channels etc.) Therefore add a driver callback to check if the desired new_active links will be supported by the driver or not. This callback will be called in the beginning of ieee80211_set_active_links() so we won't do anything before we are sure it is supported. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20231220133549.64c4d70b33b8.I79708619be76b8ecd4ef3975205b8f903e24a2cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: fix advertised TTLM schedulingAyala Beker
Handle a case of time overflow, where the switch time might be smaller than the partial TSF in the beacon. Additionally, apply advertised TTLM earlier in order to be ready on time on the newly activated links. Fixes: 702e80470a33 ("wifi: mac80211: support handling of advertised TID-to-link mapping") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.15079c34e5c8.I0dd50bcceff5953080cdd7aee5118b72c78c6507@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: avoid double free if updating BSS failsBenjamin Berg
cfg80211_update_known_bss will always consume the passed IEs. As such, cfg80211_update_assoc_bss_entry also needs to always set the pointers to NULL so that no double free can occur. Note that hitting this would probably require being connected to a hidden BSS which is then doing a channel switch while also switching to be not hidden anymore at the same time. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.8891edb28d51.Id09c5145363e990ff5237decd58296302e2d53c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: ensure cfg80211_bss_update frees IEs on errorBenjamin Berg
cfg80211_bss_update is expected to consume the IEs that are passed into it in the temporary internal BSS. This did not happen in some error cases (which are also WARN_ON paths), so change the code to use a common label and use that everywhere. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.8e72ea105e17.Ic81e9431e980419360e97502ce8c75c58793f05a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: free beacon_ies when overridden from hidden BSSBenjamin Berg
This is a more of a cosmetic fix. The branch will only be taken if proberesp_ies is set, which implies that beacon_ies is not set unless we are connected to an AP that just did a channel switch. And, in that case we should have found the BSS in the internal storage to begin with. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: allow 64-bit radiotap timestampsJohannes Berg
When reporting the radiotap timestamp, the mactime field is usually unused, we take the data from the device_timestamp. However, there can be cases where the radiotap timestamp is better reported as a 64-bit value, so since the mactime is free, add a flag to support using the mactime as a 64-bit radiotap timestamp. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.00c8b9234f0c.Ie3ce5eae33cce88fa01178e7aea94661ded1ac24@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: rework RX timestamp flagsJohannes Berg
We only have a single flag free, and before using that for another mactime flag, instead refactor the mactime flags to use a 2-bit field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: handle UHB AP and STA power typeMukesh Sisodiya
UHB AP send supported power type(LPI, SP, VLP) in beacon and probe response IE and STA should connect to these AP only if their regulatory support the AP power type. Beacon/Probe response are reported to userspace with reason "STA regulatory not supporting to connect to AP based on transmitted power type" and it should not connect to AP. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: Add custom reg for DFS concurrentAndrei Otcheretianski
Add custom regulatory that marks DFS channels as DFS_CONCURRENT. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.4b08a6530fa3.Ic285ca7a4728e77a4bea1394a6a52cf286fbea22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: Schedule regulatory channels check on bandwith changeAndrei Otcheretianski
Some devices may support concurrent DFS operation which relies on the BSS channel width for its relaxations. Notify cfg80211 about BW change so it can schedule regulatory checks. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.e08f8e9ebc67.If8915d13e203ebd380579f55fd9148e9b3f43306@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: Schedule regulatory check on BSS STA channel changeAndrei Otcheretianski
Due to different relaxation policies it may be needed to re-check channels after a BSS station interface is disconnected or performed a channel switch. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.1f2f8475bcf1.I1879d259d8d756159c8060f61f4bce172e6d323e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: reg: Support P2P operation on DFS channelsAndrei Otcheretianski
FCC-594280 D01 Section B.3 allows peer-to-peer and ad hoc devices to operate on DFS channels while they operate under the control of a concurrent DFS master. For example, it is possible to have a P2P GO on a DFS channel as long as BSS connection is active on the same channel. Allow such operation by adding additional regulatory flags to indicate DFS concurrent channels and capable devices. Add the required relaxations in DFS regulatory checks. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.bdfb8a9c7c54.I973563562969a27fea8ec5685b96a3a47afe142f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: Skip association timeout update after comeback rejectionJouni Malinen
It is possible for the TX status report for the (Re)Association Request frame to be delayed long enough for the AP's (Re)Association Response frame to be received and processed before it. If that were to happen for a case where the AP rejects the association with indication to come back later, the association timeout and retry state should not be modified anymore with the TX status information that would be processed after this. Updating the association timeout in such a reverse order of events could result in shortening the timeouts for the association comeback mechanism and that could result in the association failing. Track whether we have already processed association rejection with comeback time and if so, skip the timeout and retry update on any following TX status report. Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com> Link: https://msgid.link/20231219174814.2581575-1-j@w1.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: address some kerneldoc warningsJonathan Corbet
include/net/mac80111.h contains a number of either excess or incorrect kerneldoc entries for structure members, leading to these warnings: ./include/net/mac80211.h:491: warning: Excess struct member 'rssi' description in 'ieee80211_event' ./include/net/mac80211.h:491: warning: Excess struct member 'mlme' description in 'ieee80211_event' ./include/net/mac80211.h:491: warning: Excess struct member 'ba' description in 'ieee80211_event' ./include/net/mac80211.h:777: warning: Excess struct member 'ack_enabled' description in 'ieee80211_bss_conf' ./include/net/mac80211.h:1222: warning: Excess struct member 'ampdu_ack_len' description in 'ieee80211_tx_info' ./include/net/mac80211.h:1222: warning: Excess struct member 'ampdu_len' description in 'ieee80211_tx_info' ./include/net/mac80211.h:1222: warning: Excess struct member 'ack_signal' description in 'ieee80211_tx_info' ./include/net/mac80211.h:2920: warning: Excess struct member 'radiotap_he' description in 'ieee80211_hw' Fix or remove the entries as needed. This change removes 208 warnings from a "make htmldocs" build. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://msgid.link/87zfy4bhxo.fsf@meer.lwn.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: support HE 40 MHz in 2.4 GHz bandMiri Korenblit
We are missing the flag that indicates that capability of 40 MHz bandwidth support in HE on the LB. Add it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20231220075830.4f10c6b64d1a.I1ba6905c806be6e0548ed15130c0bbb2ee04c9fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: cfg80211: address several kerneldoc warningsJonathan Corbet
include/net/cfg80211.h includes a number of kerneldoc entries for struct members that do not exist, leading to these warnings: ./include/net/cfg80211.h:3192: warning: Excess struct member 'band_pref' description in 'cfg80211_bss_selection' ./include/net/cfg80211.h:3192: warning: Excess struct member 'adjust' description in 'cfg80211_bss_selection' ./include/net/cfg80211.h:6181: warning: Excess struct member 'bssid' description in 'wireless_dev' ./include/net/cfg80211.h:6181: warning: Excess struct member 'beacon_interval' description in 'wireless_dev' ./include/net/cfg80211.h:7299: warning: Excess struct member 'bss' description in 'cfg80211_rx_assoc_resp_data' Remove and/or repair each entry to address the warnings and ensure a proper docs build for the affected structures. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://msgid.link/87plz1g2sc.fsf@meer.lwn.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21rust: upgrade to Rust 1.74.1Miguel Ojeda
This is the next upgrade to the Rust toolchain, from 1.73.0 to 1.74.1 (i.e. the latest) [1]. See the upgrade policy [2] and the comments on the first upgrade in commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2"). # Unstable features No unstable features (that we use) were stabilized. Therefore, the only unstable features allowed to be used outside the `kernel` crate are still `new_uninit,offset_of`, though other code to be upstreamed may increase the list (e.g. `offset_of` was added recently). Please see [3] for details. # Other improvements Rust 1.74.0 allows to use `#[repr(Rust)]` explicitly [4], which can be useful to be explicit about particular cases that would normally use e.g. the C representation, such as silencing lints like the upcoming additions we requested [5] to the `no_mangle_with_rust_abi` Clippy lint (which in turn triggered the `#[repr(Rust)]` addition). Rust 1.74.0 includes a fix for one of the false negative cases we reported in Clippy's `disallowed_macros` lint [6] that we would like to use in the future. Rust 1.74.1 fixes an ICE that the Apple AGX GPU driver was hitting [7]. # Required changes For this upgrade, no changes were required (i.e. on our side). # `alloc` upgrade and reviewing The vast majority of changes are due to our `alloc` fork being upgraded at once. There are two kinds of changes to be aware of: the ones coming from upstream, which we should follow as closely as possible, and the updates needed in our added fallible APIs to keep them matching the newer infallible APIs coming from upstream. Instead of taking a look at the diff of this patch, an alternative approach is reviewing a diff of the changes between upstream `alloc` and the kernel's. This allows to easily inspect the kernel additions only, especially to check if the fallible methods we already have still match the infallible ones in the new version coming from upstream. Another approach is reviewing the changes introduced in the additions in the kernel fork between the two versions. This is useful to spot potentially unintended changes to our additions. To apply these approaches, one may follow steps similar to the following to generate a pair of patches that show the differences between upstream Rust and the kernel (for the subset of `alloc` we use) before and after applying this patch: # Get the difference with respect to the old version. git -C rust checkout $(linux/scripts/min-tool-version.sh rustc) git -C linux ls-tree -r --name-only HEAD -- rust/alloc | cut -d/ -f3- | grep -Fv README.md | xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH git -C linux diff --patch-with-stat --summary -R > old.patch git -C linux restore rust/alloc # Apply this patch. git -C linux am rust-upgrade.patch # Get the difference with respect to the new version. git -C rust checkout $(linux/scripts/min-tool-version.sh rustc) git -C linux ls-tree -r --name-only HEAD -- rust/alloc | cut -d/ -f3- | grep -Fv README.md | xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH git -C linux diff --patch-with-stat --summary -R > new.patch git -C linux restore rust/alloc Now one may check the `new.patch` to take a look at the additions (first approach) or at the difference between those two patches (second approach). For the latter, a side-by-side tool is recommended. Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1741-2023-12-07 [1] Link: https://rust-for-linux.com/rust-version-policy [2] Link: https://github.com/Rust-for-Linux/linux/issues/2 [3] Link: https://github.com/rust-lang/rust/pull/114201 [4] Link: https://github.com/rust-lang/rust-clippy/issues/11219 [5] Link: https://github.com/rust-lang/rust-clippy/issues/11431 [6] Link: https://github.com/rust-lang/rust/issues/117976#issuecomment-1822225691 [7] Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Tested-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20231214092958.377061-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21kernel/module: improve documentation for try_module_get()Marco Pagani
The sentence "this call will fail if the module is already being removed" is potentially confusing and may contradict the rest of the documentation. If one tries to get a module that has already been removed using a stale pointer, the kernel will crash. Signed-off-by: Marco Pagani <marpagan@redhat.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-12-21afs: Fix use-after-free due to get/remove race in volume treeDavid Howells
When an afs_volume struct is put, its refcount is reduced to 0 before the cell->volume_lock is taken and the volume removed from the cell->volumes tree. Unfortunately, this means that the lookup code can race and see a volume with a zero ref in the tree, resulting in a use-after-free: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda ... RIP: 0010:refcount_warn_saturate+0x7a/0xda ... Call Trace: afs_get_volume+0x3d/0x55 afs_create_volume+0x126/0x1de afs_validate_fc+0xfe/0x130 afs_get_tree+0x20/0x2e5 vfs_get_tree+0x1d/0xc9 do_new_mount+0x13b/0x22e do_mount+0x5d/0x8a __do_sys_mount+0x100/0x12a do_syscall_64+0x3a/0x94 entry_SYSCALL_64_after_hwframe+0x62/0x6a Fix this by: (1) When putting, use a flag to indicate if the volume has been removed from the tree and skip the rb_erase if it has. (2) When looking up, use a conditional ref increment and if it fails because the refcount is 0, replace the node in the tree and set the removal flag. Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21ida: Fix crash in ida_free when the bitmap is emptyMatthew Wilcox (Oracle)
The IDA usually detects double-frees, but that detection failed to consider the case when there are no nearby IDs allocated and so we have a NULL bitmap rather than simply having a clear bit. Add some tests to the test-suite to be sure we don't inadvertently reintroduce this problem. Unfortunately they're quite noisy so include a message to disregard the warnings. Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21afs: Fix overwriting of result of DNS queryDavid Howells
In afs_update_cell(), ret is the result of the DNS lookup and the errors are to be handled by a switch - however, the value gets clobbered in between by setting it to -ENOMEM in case afs_alloc_vlserver_list() fails. Fix this by moving the setting of -ENOMEM into the error handling for OOM failure. Further, only do it if we don't have an alternative error to return. Found by Linux Verification Center (linuxtesting.org) with SVACE. Based on a patch from Anastasia Belova [1]. Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Anastasia Belova <abelova@astralinux.ru> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: lvc-project@linuxtesting.org Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1] Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21apparmorfs: don't duplicate kfree_link()Al Viro
rawdata_link_cb() is identical to it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21orangefs: saner arguments passing in readdir gutsAl Viro
orangefs_dir_fill() doesn't use oi and dentry arguments at all do_readdir() gets dentry, uses only dentry->d_inode; it also gets oi, which is ORANGEFS_I(dentry->d_inode) (i.e. ->d_inode - constant offset). orangefs_dir_mode() gets dentry and oi, uses only to pass those to do_readdir(). orangefs_dir_iterate() uses dentry and oi only to pass those to orangefs_dir_fill() and orangefs_dir_more(). The only thing it really needs is ->d_inode; moreover, that's better expressed as file_inode(file) - no need to go through ->f_path.dentry->d_inode. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21ocfs2_find_match(): there's no such thing as NULL or negative ->d_parentAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21Merge tag 'afs-fixes-20231221' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Improve the interaction of arbitrary lookups in the AFS dynamic root that hit DNS lookup failures [1] where kafs behaves differently from openafs and causes some applications to fail that aren't expecting that. Further, negative DNS results aren't getting removed and are causing failures to persist. - Always delete unused (particularly negative) dentries as soon as possible so that they don't prevent future lookups from retrying. - Fix the handling of new-style negative DNS lookups in ->lookup() to make them return ENOENT so that userspace doesn't get confused when stat succeeds but the following open on the looked up file then fails. - Fix key handling so that DNS lookup results are reclaimed almost as soon as they expire rather than sitting round either forever or for an additional 5 mins beyond a set expiry time returning EKEYEXPIRED. They persist for 1s as /bin/ls will do a second stat call if the first fails" Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 [1] Reviewed-by: Jeffrey Altman <jaltman@auristor.com> * tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry afs: Fix dynamic root lookup DNS check afs: Fix the dynamic root's d_delete to always delete unused dentries
2023-12-21reiserfs_add_entry(): get rid of pointless namelen checksAl Viro
In all cases namelen is ->d_name.len of some dentry; moreover, a dentry that has passed ->lookup() without triggering ENAMETOOLONG check there. The comment next to these checks is either a rudiment of some other check that used to be there once upon a time, or an attempt to come up with the possible reason for that check (well, more like "why does ext3 do it?") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21__ocfs2_add_entry(), ocfs2_prepare_dir_for_insert(): namelen checksAl Viro
namelen can't be zero; neither when it's coming from dentry name, nor when dealing with orphans (in ocfs2_orphan_add() and __ocfs2_prepare_orphan_dir()). Rudiment of old ext2 pointless check, long gone in ext2 itself... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21ext4_add_entry(): ->d_name.len is never 0Al Viro
That bogosity goes back to the initial merge of ext3. Once upon a time ext2 used to have a similar check; that got taken out during the switch to page cache (June 2001). ext3 got merged into mainline 5 months later, still using buffer cache for directories; removal of the pointless check in ext2 should've been done as a separate patch, but it hadn't been, so that thing got missed... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-23 11:05:54 +0000