| Age | Commit message (Collapse) | Author |
|---|
|
Merge updates of Intel thermal drivers for 6.11-rc1:
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck).
- Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
Gilbert).
- Improve intel_pch_thermal kernel log messages printed during suspend
to idle (Zhang Rui).
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri).
- Add DLVR and MSI interrupt support for the Lunar Lake platform to the
int340x thermal driver (Srinivas Pandruvada).
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).
- Make the HFI thermal driver use package scope for HFI instances as
per the Intel SDM (Zhang Rui).
* thermal-intel:
thermal: intel: hfi: Give HFI instances package scope
thermal: intel: int340x: Enable WLT and power floor support for Lunar Lake
thermal: intel: int340x: Support MSI interrupt for Lunar Lake
thermal: intel: int340x: Remove unnecessary calls to free irq
thermal: intel: int340x: Add DLVR support for Lunar Lake
thermal: intel: int340x: Capability to map user space to firmware values
thermal: intel: int340x: Cleanup of DLVR sysfs on driver remove
thermal: intel: intel_tcc_cooling: Use a model-specific bitmask for TCC offset
thermal: intel: intel_tcc: Add model checks for temperature registers
thermal: intel: intel_pch: Improve cooling log
thermal: int3403: remove unused struct 'int3403_performance_state'
thermal: int3400: Use sizeof(*pointer) instead of sizeof(type)
thermal: intel: intel_soc_dts_thermal: Switch to new Intel CPU model defines
thermal: intel: intel_tcc_cooling: Switch to new Intel CPU model defines
|
|
Merge updates related to the thermal core for 6.11-rc1:
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki).
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki).
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski).
- Make the uniphier thermal driver use thermal_zone_for_each_trip() for
walking trip points (Rafael Wysocki).
* thermal-core:
thermal: core: Add sanity checks for polling_delay and passive_delay
thermal: trip: Fold __thermal_zone_get_trip() into its caller
thermal: trip: Pass trip pointer to .set_trip_temp() thermal zone callback
thermal: imx: Drop critical trip check from imx_set_trip_temp()
thermal: trip: Add conversion macros for thermal trip priv field
thermal: helpers: Introduce thermal_trip_is_bound_to_cdev()
thermal: core: Change passive_delay and polling_delay data type
thermal: core: constify 'type' in devm_thermal_of_cooling_device_register()
thermal: uniphier: Use thermal_zone_for_each_trip() for walking trip points
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal drivers updates for 6.11-rc1 from Daniel Lezcano:
"- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove a unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add the DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Take into account some production platforms may not have calibration
data. Deal with it with a default value instead of failing the
initialization (Chen-Yu Tsai)
- Fix the sensor cell size on the Exynos platform (Krzysztof Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable on the broadcom driver
(Krzysztof Kozlowski)
- Drop 'trips' node as required from the thermal zone bindings in
order to fix the remaining warnings appearing with thermal zone
whithout trip points defined (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Cleanup code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-v6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
"st,stih416-mpe-thermal" compatible seems to appear nowhere in the
device-tree nor in the documentation.
Remove compatible and related code.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20240708161840.102004-1-rgallaispou@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-12-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-11-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-10-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-9-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-8-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-7-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-6-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-5-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev. While touching devm_kzalloc(), use preferred sizeof(*)
syntax.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-4-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-3-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify the probe() function by using local 'dev' instead of
&pdev->dev.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-2-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface. Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
still registered and accessible to users,
2. devm interface will unregister thermal zone.
This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.
Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.
Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is possible to have thermal zones which don't have any trip points.
These zones in effect simply represent a temperature sensor without any
action associated with it. While the schema has always required a
'trips' node, users have existed for a long time without it. Update the
schema to match reality.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709150154.3272825-1-robh@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-12-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Preferred indentation for DTS examples in the bindings is 4-space. It
is also preferred not to have redundant/unused labels. No functional
change
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-22-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Simplify few bindings which already reference thermal-sensor.yaml schema
by dropping unneeded requiring of '#thermal-sensor-cells' and dropping
assigned-clocks properties (core schema allows it if 'clocks' are
there).
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-21-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-20-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-19-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-18-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-17-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-16-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-15-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-14-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-13-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-11-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-10-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-9-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-8-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-7-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-6-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-5-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-4-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-3-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Device is a thermal sensor and all in-tree DTS provide
'#thermal-sensor-cells', so reference the thermal-sensor.yaml to
simplify it, bring the common definition of '#thermal-sensor-cells'
property and require it.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Guillaume LA ROQUE <glaroque@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-2-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
All Samsung Exynos SoCs Thermal Management Units have only one sensor,
so make '#thermal-sensor-cells' fixed at 0.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-1-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.
Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte. The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document the Temperature Sensor (TSENS) on the X1E80100 Platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20240628-x1e80100-bindings-thermal-qcom-tsens-v2-1-4843d4c2ba24@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Convert the hisilicon SoCs tsensor txt bindings to dt-schema
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240618-hisilicon-thermal-dt-bindings-conversion-v4-1-7eba97fbe6d0@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.
Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.
The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.
The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.
Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This add suspend-to-ram support.
The derived_table is kept-as is, so the resume is only about
pm_runtime_* calls and restoring the same registers as the probe.
Extract the hardware initialization procedure to a function called at
both probe-time & resume-time.
The probe-time loop is split in two to ensure doing the hardware
initialization before registering thermal zones. That ensures our
callbacks cannot be called while in bad state.
The 100ms delay in the hardware initialization sequence was removed.
It was initially added to be sure the thresholds are programmed before
enabling the interrupt, but in fact it's not needed (tested on J7200
platform).
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240425153238.498750-1-thomas.richard@bootlin.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The R-Car thermal driver depends on OF, describe this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-3-niklas.soderlund+renesas@ragnatech.se
|
|
Move all Renesas thermal drivers to a vendor specific directory.
All drivers are moved verbatim apart from the updated include path for
thermal_hwmon.h.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-2-niklas.soderlund+renesas@ragnatech.se
|
|
If polling_delay is nonzero and passive_delay is greater than
polling_delay, the thermal zone temperature will be updated less
often when tz->passive is nonzero, which is not as expected. Make
the thermal zone registration fail with -EINVAL in that case as
this is a clear thermal zone configuration mistake.
If polling_delay is nonzero and passive_delay is 0, which is regarded
as a valid thermal zone configuration, the thermal zone will use polling
except when tz->passive is nonzero. However, the expected behavior in
that case is to continue temperature polling with the same delay value
regardless of tz->passive, so set passive_delay to the polling_delay
value then.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/5802156.DvuYhMxLoT@rjwysocki.net
|
|
Because __thermal_zone_get_trip() is only called by thermal_zone_get_trip()
now, fold the former into the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22339769.EfDdHjke4D@rjwysocki.net
|
