summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-30NFS: restore module put when manager exits.NeilBrown
Commit f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") removed calls to module_put_and_kthread_exit() from threads that acted as SUNRPC servers and had a related svc_serv_ops structure. This was correct. It ALSO removed the module_put_and_kthread_exit() call from nfs4_run_state_manager() which is NOT a SUNRPC service. Consequently every time the NFSv4 state manager runs the module count increments and won't be decremented. So the nfsv4 module cannot be unloaded. So restore the module_put_and_kthread_exit() call. Fixes: f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-06-30i40e: Fix VF's MAC Address change on VMNorbert Zulinski
Clear VF MAC from parent PF and remove VF filter from VSI when both conditions are true: -VIRTCHNL_VF_OFFLOAD_USO is not used -VM MAC was not set from PF level It affects older version of IAVF and it allow them to change MAC Address on VM, newer IAVF won't change their behaviour. Previously it wasn't possible to change VF's MAC Address on VM because there is flag on IAVF driver that won't allow to change MAC Address if this address is given from PF driver. Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30i40e: Fix dropped jumbo frames statisticsLukasz Cieplicki
Dropped packets caused by too large frames were not included in dropped RX packets statistics. Issue was caused by not reading the GL_RXERR1 register. That register stores count of packet which was have been dropped due to too large size. Fix it by reading GL_RXERR1 register for each interface. Repro steps: Send a packet larger than the set MTU to SUT Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0" Fixes: 41a9e55c89be ("i40e: add missing VSI statistics") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30Merge tag 'nvme-5.19-2022-06-30' of git://git.infradead.org/nvme into block-5.19Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.19 - more quirks (Lamarque Vieira Souza, Pablo Greco) - fix a fabrics disconnect regression (Ruozhu Li) - fix a nvmet-tcp data_digest calculation regression (Sagi Grimberg) - fix nvme-tcp send failure handling (Sagi Grimberg) - fix a regression with nvmet-loop and passthrough controllers (Alan Adamson)" * tag 'nvme-5.19-2022-06-30' of git://git.infradead.org/nvme: nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1 nvmet: add a clear_ids attribute for passthru targets nvme: fix regression when disconnect a recovering ctrl nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G) nvme-tcp: always fail a request when sending it failed nvmet-tcp: fix regression in data_digest calculation
2022-06-30drm/amdkfd: Bump KFD API version for SMI profiling eventPhilip Yang
Indicate SMI profiling events available. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Asynchronously free smi_clientPhilip Yang
The synchronize_rcu may take several ms, which noticeably slows down applications close SMI event handle. Use call_rcu to free client->fifo and client asynchronously and eliminate the synchronize_rcu call in the user thread. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Add unmap from GPU SMI eventPhilip Yang
SVM range unmapped from GPUs when range is unmapped from CPU, or with xnack on from MMU notifier when range is evicted or migrated. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Add user queue eviction restore SMI eventPhilip Yang
Output user queue eviction and restore event. User queue eviction may be triggered by svm or userptr MMU notifier, TTM eviction, device suspend and CRIU checkpoint and restore. User queue restore may be rescheduled if eviction happens again while restore. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Add migration SMI eventPhilip Yang
For migration start and end event, output timestamp when migration starts, ends, svm range address and size, GPU id of migration source and destination and svm range attributes, Migration trigger could be prefetch, CPU or GPU page fault and TTM eviction. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Add GPU recoverable fault SMI eventPhilip Yang
Use ktime_get_boottime_ns() as timestamp to correlate with other APIs. Output timestamp when GPU recoverable fault starts and ends to recover the fault, if migration happened or only GPU page table is updated to recover, fault address, if read or write fault. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Enable per process SMI eventPhilip Yang
Process receive event from same process by default. Add a flag to be able to receive event from all processes, this requires super user permission. Event using pid 0 to send the event to all processes, to keep the default behavior of existing SMI events. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: Add KFD SMI event IDs and triggersPhilip Yang
Define new system management interface event IDs for migration, GPU recoverable page fault, user queues eviction, restore and unmap from GPU events and corresponding event triggers, those will be implemented in the following patches. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30Revert "drm/amdgpu/gmc11: avoid cpu accessing registers to flush VM"Jack Xiao
This reverts commit 8748de873fedf4d55bdd99bbb738ee7ddf329792 since drv enabled mes to access registers. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdgpu: enable mes to access registers v2Jack Xiao
Enable mes to access registers. v2: squash mes sched ring enablement flag Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdgpu/mes: add mes register access interfaceJack Xiao
Add mes register access routines: 1. read register 2. write register 3. wait register 4. write and wait register Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdgpu/mes11: add mes11 misc opJack Xiao
Add misc op commands in mes11. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdkfd: fix cu mask for asics with wgpsJonathan Kim
GFX10 and up have work group processors (WGP) and WGP mode is the native compile mode. KFD and ROCr have no visibility into whether a dispatch is operating in CU or WGP mode. Enforce CU masking to be pairwise continguous in enablement and round robin distribute CUs across the SEs in a pairwise manner to assume WGP mode at all times. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdgpu: add common interface for mes misc opJack Xiao
Add common interface for mes misc op, including accessing register interface. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amdgpu/mes11: update mes interface for acessing registersJack Xiao
Update MES firmware api for accessing registers. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm: Remove unnecessary junk from drm_crtc.hVille Syrjälä
drm_crtc.h is including several entirely unnecessary headers, and also contains unused forward declarations. Remove it all. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-6-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-30net: dsa: felix: fix race between reading PSFP stats and port statsVladimir Oltean
Both PSFP stats and the port stats read by ocelot_check_stats_work() are indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW, read from SYS:STAT:CNT[n]. It's just that for port stats, we write STAT_VIEW with the index of the port, and for PSFP stats, we write STAT_VIEW with the filter index. So if we allow them to run concurrently, ocelot_check_stats_work() may change the view from vsc9959_psfp_counters_get(), and vice versa. Fixes: 7d4b564d6add ("net: dsa: felix: support psfp filter on vsc9959") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30selftest: tun: add test for NAPI dismantleJakub Kicinski
Being lazy does not pay, add the test for various ordering of tun queue close / detach / destroy. Link: https://lore.kernel.org/r/20220629181911.372047-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: tun: avoid disabling NAPI twiceJakub Kicinski
Eric reports that syzbot made short work out of my speculative fix. Indeed when queue gets detached its tfile->tun remains, so we would try to stop NAPI twice with a detach(), close() sequence. Alternative fix would be to move tun_napi_disable() to tun_detach_all() and let the NAPI run after the queue has been detached. Fixes: a8fc8cb5692a ("net: tun: stop NAPI when detaching queues") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: sparx5: mdb add/del handle non-sparx5 devicesCasper Andersson
When adding/deleting mdb entries on other net_devices, eg., tap interfaces, it should not crash. Fixes: 3bacfccdcb2d ("net: sparx5: Add mdb handlers") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLakeSumeet Pawnikar
Add RaptorLake to the list of processor models supported by the Intel TCC cooling driver. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> [ rjw: Subject edits, new changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-06-30s390/qdio: Fix spelling mistakeZhang Jiaming
Change 'defineable' to 'definable'. Change 'paramater' to 'parameter'. Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Link: https://lore.kernel.org/r/20220623060543.12870-1-jiaming@nfschina.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30s390/sclp: Fix typo in commentsJiang Jian
Remove the repeated word 'and' from comments Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220622142713.14187-1-jiangjian@cdjrlc.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30s390/archrandom: simplify back to earlier design and initialize earlierJason A. Donenfeld
s390x appears to present two RNG interfaces: - a "TRNG" that gathers entropy using some hardware function; and - a "DRBG" that takes in a seed and expands it. Previously, the TRNG was wired up to arch_get_random_{long,int}(), but it was observed that this was being called really frequently, resulting in high overhead. So it was changed to be wired up to arch_get_random_ seed_{long,int}(), which was a reasonable decision. Later on, the DRBG was then wired up to arch_get_random_{long,int}(), with a complicated buffer filling thread, to control overhead and rate. Fortunately, none of the performance issues matter much now. The RNG always attempts to use arch_get_random_seed_{long,int}() first, which means a complicated implementation of arch_get_random_{long,int}() isn't really valuable or useful to have around. And it's only used when reseeding, which means it won't hit the high throughput complications that were faced before. So this commit returns to an earlier design of just calling the TRNG in arch_get_random_seed_{long,int}(), and returning false in arch_get_ random_{long,int}(). Part of what makes the simplification possible is that the RNG now seeds itself using the TRNG at bootup. But this only works if the TRNG is detected early in boot, before random_init() is called. So this commit also causes that check to happen in setup_arch(). Cc: stable@vger.kernel.org Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Ingo Franzki <ifranzki@linux.ibm.com> Cc: Juergen Christ <jchrist@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30io_uring: fix provided buffer importDylan Yudaken
io_import_iovec uses the s pointer, but this was changed immediately after the iovec was re-imported and so it was imported into the wrong place. Change the ordering. Fixes: 2be2eb02e2f5 ("io_uring: ensure reads re-import for selected buffers") Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220630132006.2825668-1-dylany@fb.com [axboe: ensure we don't half-import as well] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Three minor bug fixes: - qedr not setting the QP timeout properly toward userspace - Memory leak on error path in ib_cm - Divide by 0 in RDMA interrupt moderation" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: linux/dim: Fix divide by 0 in RDMA DIM RDMA/cm: Fix memory leak in ib_cm_insert_listen RDMA/qedr: Fix reporting QP timeout attribute
2022-06-30Merge tag 'fsnotify_for_v5.19-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify fix from Jan Kara: "A fix for recently added fanotify API to have stricter checks and refuse some invalid flag combinations to make our life easier in the future" * tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: refine the validation checks on non-dir inode mask
2022-06-30Merge tag 'v5.19-p3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a regression that breaks the ccp driver" * tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Fix device IRQ counting by using platform_irq_count()
2022-06-30drm/i915: Drain freed object after suspend displayJosé Roberto de Souza
Display is turned off by i915_drm_suspend() during the suspend procedure, removing the last reference of some gem objects that were used by display. The issue is that those objects are only actually freed when mm.free_work executed and that can happen very late in the suspend process causing issues. So here draining all freed objects released by display fixing suspend issues. Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220629134721.48375-1-jose.souza@intel.com
2022-06-30Merge tag 'devfreq-fixes-for-5.19-rc5' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq fixes for 5.19-rc5 from Chanwoo Choi: "1. Fix devfreq passive governor issue when cpufreq policies are not ready during kernel boot because some CPUs turn on after kernel booting or others. - Re-initialize the vairables of struct devfreq_passive_data when PROBE_DEFER happens when cpufreq_get() returns NULL. - Use dev_err_probe to mute warning when PROBE_DEFER. - Fix cpufreq passive unregister erroring on PROBE_DEFER by using the allocated parent_cpu_data list to free resouce instead of for_each_possible_cpu(). - Remove duplicate cpufreq passive unregister and warning when PROBE_DEFER. - Use HZ_PER_KZH macro in units.h. - Fix wrong indentation in SPDX-License line. 2. Fix reference count leak in exynos-ppmu.c by using of_node_put(). 3. Rework freq_table to be local to devfreq struct - struct devfreq_dev_profile includes freq_table array to store the supported frequencies. If devfreq driver doesn't initialize the freq_table, devfreq core allocates the memory and initializes the freq_table. On a devfreq PROBE_DEFER, the freq_table in the driver profile struct is never reset and may be left in an undefined state. To fix this and correctly handle PROBE_DEFER, use a local freq_table and max_state in the devfreq struct." * tag 'devfreq-fixes-for-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: passive: revert an editing accident in SPDX-License line PM / devfreq: Fix kernel warning with cpufreq passive register fail PM / devfreq: Rework freq_table to be local to devfreq struct PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER PM / devfreq: Mute warning on governor PROBE_DEFER PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
2022-06-30io_uring: keep sendrecv flags in ioprioPavel Begunkov
We waste a u64 SQE field for flags even though we don't need as many bits and it can be used for something more useful later. Store io_uring specific send/recv flags in sqe->ioprio instead of ->addr2. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Fixes: 0455d4ccec54 ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg") [axboe: change comment in io_uring.h as well] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-30s390/purgatory: remove duplicated build rule of kexec-purgatory.oMasahiro Yamada
This is equivalent to the pattern rule in scripts/Makefile.build. Having the dependency on $(obj)/purgatory.ro is enough. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220613170902.1775211-3-masahiroy@kernel.org Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30s390/purgatory: hard-code obj-y in MakefileMasahiro Yamada
The purgatory/ directory is entirely guarded in arch/s390/Kbuild. CONFIG_ARCH_HAS_KEXEC_PURGATORY is bool type. $(CONFIG_ARCH_HAS_KEXEC_PURGATORY) is always 'y' when Kbuild visits this Makefile for building. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220613170902.1775211-2-masahiroy@kernel.org Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30s390: remove unneeded 'select BUILD_BIN2C'Masahiro Yamada
Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"), s390 builds the purgatory without using bin2c. Remove 'select BUILD_BIN2C' to avoid the unneeded build of bin2c. Fixes: 4c0f032d4963 ("s390/purgatory: Omit use of bin2c") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220613170902.1775211-1-masahiroy@kernel.org Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-06-30drm/i915: use DISPLAY_VER() instead of accessing match_info directlyJani Nikula
We've just set up device info in i915_driver_create() so we can use DISPLAY_VER() intead of looking at match_info directly. Semantically we want to check the display version instead of the graphics version, and for the earlier platforms they are always the same. v2: Use DISPLAY_VER() instead of GRAPHICS_VER() (Ville) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220628141005.226252-1-jani.nikula@intel.com
2022-06-30drm/i915/bios: debug log ddi port info after parsingJani Nikula
The ddc pin and aux channel sanitization may disable DVI/HDMI and DP, respectively, of ports parsed earlier, in "last one wins" fashion. With parsing and printing interleaved, we'll end up logging support first and disabling later anyway. Now that we've split ddi port info parsing and printing, take it further by doing the printing in a separate loop, fixing the logging. Note that this also changes the logging order from VBT child device order to port number order. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621123732.1118437-1-jani.nikula@intel.com
2022-06-30net: sfp: fix memory leak in sfp_probe()Jianglei Nie
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30mlxsw: spectrum_router: Fix rollback in tunnel next hop initPetr Machata
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When that function results in an error, the next hop will not have been removed from the linked list. As the error is propagated upwards and the caller frees the next hop object, the linked list ends up holding an invalid object. A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback block does exist, however does not include the linked list removal. Both IPv6 and IPv4 next hops have a similar issue with next-hop counter rollbacks. As these were introduced in the same patchset as the next hop linked list, include the cleanup in this patch. Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list") Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30net: rose: fix UAF bugs caused by timer handlerDuoming Zhou
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry() and rose_idletimer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and the refcount of sock is not managed properly. One of the UAF bugs is shown below: (thread 1) | (thread 2) | rose_bind | rose_connect | rose_start_heartbeat rose_release | (wait a time) case ROSE_STATE_0 | rose_destroy_socket | rose_heartbeat_expiry rose_stop_heartbeat | sock_put(sk) | ... sock_put(sk) // FREE | | bh_lock_sock(sk) // USE The sock is deallocated by sock_put() in rose_release() and then used by bh_lock_sock() in rose_heartbeat_expiry(). Although rose_destroy_socket() calls rose_stop_heartbeat(), it could not stop the timer that is running. The KASAN report triggered by POC is shown below: BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110 Write of size 4 at addr ffff88800ae59098 by task swapper/3/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? irq_work_single+0xbb/0x140 ? _raw_spin_lock+0x5a/0x110 kasan_report+0xed/0x120 ? _raw_spin_lock+0x5a/0x110 kasan_check_range+0x2bd/0x2e0 _raw_spin_lock+0x5a/0x110 rose_heartbeat_expiry+0x39/0x370 ? rose_start_heartbeat+0xb0/0xb0 call_timer_fn+0x2d/0x1c0 ? rose_start_heartbeat+0xb0/0xb0 expire_timers+0x1f3/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 irq_exit_rcu+0x41/0xa0 sysvec_apic_timer_interrupt+0x8c/0xb0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1b/0x20 RIP: 0010:default_idle+0xb/0x10 RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202 RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180 RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46 R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000 R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000 ... Allocated by task 146: __kasan_kmalloc+0xc4/0xf0 sk_prot_alloc+0xdd/0x1a0 sk_alloc+0x2d/0x4e0 rose_create+0x7b/0x330 __sock_create+0x2dd/0x640 __sys_socket+0xc7/0x270 __x64_sys_socket+0x71/0x80 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 152: kasan_set_track+0x4c/0x70 kasan_set_free_info+0x1f/0x40 ____kasan_slab_free+0x124/0x190 kfree+0xd3/0x270 __sk_destruct+0x314/0x460 rose_release+0x2fa/0x3b0 sock_close+0xcb/0x230 __fput+0x2d9/0x650 task_work_run+0xd6/0x160 exit_to_user_mode_loop+0xc7/0xd0 exit_to_user_mode_prepare+0x4e/0x80 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x4f/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch adds refcount of sock when we use functions such as rose_start_heartbeat() and so on to start timer, and decreases the refcount of sock when timer is finished or deleted by functions such as rose_stop_heartbeat() and so on. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Tested-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30net: usb: ax88179_178a: Fix packet receivingJose Alonso
This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Alonso <joalonsof@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30drm/edid: take HF-EEODB extension count into accountJani Nikula
Take the HF-EEODB extension count override into account. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c31b5796feb05c3ebac067600be2e88e098d7592.1656494768.git.jani.nikula@intel.com
2022-06-30drm/edid: add HF-EEODB support to EDID read and allocationJani Nikula
HDMI 2.1 section 10.3.6 defines an HDMI Forum EDID Extension Override Data Block, which may contain a different extension count than the base block claims. Add support for reading more EDID data if available. The extra blocks aren't parsed yet, though. Hard-coding the EEODB parsing instead of using the iterators we have is a bit of a bummer, but we have to be able to do this on a partially allocated EDID while reading it. v2: - Check for CEA Data Block Collection size (Ville) - Amend commit message and comment about hard-coded parsing Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/57b57a355d62eb91ad1e3cf555978576f2bd9fdd.1656494768.git.jani.nikula@intel.com
2022-06-30drm/edid: do invalid block filtering in-placeJani Nikula
Rewrite edid_filter_invalid_blocks() to filter invalid blocks in-place. The main motivation is to not rely on passed in information on invalid block count or the allocation size, which will be helpful in follow-up work on HF-EEODB. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6ad5e4e7b91338c0d19d7be189af31094e65555.1656494768.git.jani.nikula@intel.com
2022-06-30drm/edid: add drm_edid_raw() to access the raw EDID dataJani Nikula
Unfortunately, there are still plenty of interfaces around that require a struct edid pointer, and it's impossible to change them all at once. Add an accessor to the raw EDID data to help the transition. While there are no such cases now, be defensive against raw EDID extension count indicating bigger EDID than is actually allocated. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fb55d0b580d556bf2b8e58070239657ac9cb4b2f.1656494768.git.jani.nikula@intel.com
2022-06-30drm/probe-helper: add drm_connector_helper_get_modes()Jani Nikula
Add a helper function to be used as the "default" .get_modes() hook. This also works as an example of what the driver .get_modes() hooks are supposed to do regarding the new drm_edid_read*() and drm_edid_connector_update() calls. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d985449ed4b95971490ab7c09d2d59b58a892769.1656494768.git.jani.nikula@intel.com
2022-06-30drm/edid: add drm_edid_connector_update()Jani Nikula
Add a new function drm_edid_connector_update() to replace the combination of calls drm_connector_update_edid_property() and drm_add_edid_modes(). Usually they are called in the drivers in this order, however the former needs information from the latter. Since the new drm_edid_read*() functions no longer call the connector updates directly, and the read and update are separated, we'll need this new function for the connector update. This is all in drm_edid.c simply to keep struct drm_edid opaque. v2: - Share code with drm_connector_update_edid_property() (Ville) - Add comment about override EDID handling Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/75aa3dbc8c9aa26ebbcdeacd98a466ef8d8827f4.1656494768.git.jani.nikula@intel.com
generated by cgit (git 2.34.1) at 2025-09-23 16:48:58 +0000