summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-01arm64: dts: ti: k3-am68-sk-som: Add support for OSPI flashSinthu Raja
AM68 SK has an OSPI NOR flash on its SOM connected to OSPI0 instance. Enable support for the same. Also, describe the OSPI flash partition information through the device tree, according to the offsets in the bootloader. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20240622161835.3610348-1-u-kumar1@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-07-01arm64: dts: ti: k3-am6xx-phycore-qspi-nor: Add overlay to enable QSPI NORNathan Morrisson
Add an overlay to change from the default OSPI NOR to QSPI NOR for all am6xx-phycore-som boards. The EEPROM on am6xx-phycore-soms contains information about the configuration of the SOM. The standard configuration of the SOM has an ospi nor, but if qspi nor is populated, the EEPROM will indicate that change and we can use this overlay to cleanly change to qspi nor. Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com> Link: https://lore.kernel.org/r/20240621233143.2077941-1-nmorrisson@phytec.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-07-01arm64: dts: ti: k3-am64-tqma64xxl: relicense to GPL-2.0-only OR MITMatthias Schiffer
MIT license was added to the AM64x SoC DTSIs in commit 6248b20e3203 ("arm64: dts: ti: k3-am64: Add MIT license along with GPL-2.0"). Apply the same license change to the TQMa64xxL SoM and MBaX4XxL baseboard Device Trees. The copyright year is updated to indicate the license change. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20240625110244.9881-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-07-01arm64: dts: k3-am625-verdin: enable nau8822 pllAndrejs Cainikovs
In current configuration, nau8822 codec on development carrier board provides distorted audio output. This happens due to reference clock is fixed to 25MHz and no PLL is enabled. Following is the calculation of deviation error for different frequencies: 44100Hz: fs = 256 (fixed) prescaler = 2 target frequency = 44100 * 256 * 2 = 22579200 deviation = 22579200 vs 25000000 = 9.6832% 48000Hz: fs = 256 (fixed) prescaler = 2 target frequency = 48000 * 256 * 2 = 24576000 deviation = 24576000 vs 25000000 = 1.696% Enabling nau822 PLL via providing mclk-fs property to simple-audio-card configures clocks properly, but also adjusts audio reference clock (mclk), which in case of TI AM62 should be avoided, as it only supports 25MHz output [1][2]. This change enables PLL on nau8822 by providing mclk-fs, and moves away audio reference clock from DAI configuration, which prevents simple-audio-card to adjust it before every playback [3]. [1]: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1175479/processor-sdk-am62x-output-audio_ext_refclk0-as-mclk-for-codec-and-mcbsp/4444986#4444986 [2]: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1188051/am625-audio_ext_refclk1-clock-output---dts-support/4476322#4476322 [3]: sound/soc/generic/simple-card-utils.c#L441 Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240418105730.120913-1-andrejs.cainikovs@gmail.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-07-01arm64: dts: imx8mm-verdin: add TPM deviceVitor Soares
Add TPM device found on Verdin iMX8M Mini PID4 0090 variant. While adding the node, rename `pinctrl_pmic_tpm_ena` to `pinctrl_tpm_spi_cs`. Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp-evk: Add audio XCVR sound cardShengjiu Wang
Add audio XCVR sound card, which supports SPDIF TX & RX, eARC RX, ARC RX functions. HDMI_HPD is shared with the HDMI module so use pinctrl_hog. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Add audio XCVR device nodeShengjiu Wang
XCVR (Audio Transceiver) is a on-chip functional module found on i.MX8MP. It supports HDMI2.1 eARC, HDMI1.4 ARC and SPDIF. The reset controller is provided by the audio block control driver. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH ↵Marek Vasut
i.MX8MP DHCOM rev.200 The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses for the Fast ethernet PHYs. Update the base SoM DT to cater for this change. Prototype rev.100 SoM was never publicly available and was manufactured in limited series, anything currently available is rev.200 or newer, so it is safe to update the DT this way. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoMMarek Vasut
The DH i.MX8M Plus DHCOM SoM uses Audio PLL2 to supply clock to CLKOUT2 output. Those clock are used to supply on-SoM TC9595 DSI-to-(e)DP bridge with RefClk and must not be reconfigured, otherwise the bridge cannot work correctly. Stop reconfiguring Audio PLL2 on this SoM. Fixes: f560da940e32 ("arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-busFrank Li
Rename b(q)man-portals to b(q)man-portals-bus to fix below CHECK_DTB warnings. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: bman-portals@508000000: $nodename:0: 'bman-portals@508000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: fsl-ls1046a: rename thermal node nameFrank Li
Add thermal subfix for thermal node to fix below CHECK_DTB warnings. thermal-zones: '...' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog nodeFrank Li
clk-name is undocument property and never used in watchdog driver. Remove it and fix below CHECK_DTB warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: watchdog@2ad0000: Unevaluated properties are not allowed ('big-endian', 'clock-names' were unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: rename aux_bus to aux-busFrank Li
Rename aux_bus to aux-bus to fix below CHECK_DTBS warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: aux_bus: $nodename:0: 'aux_bus' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yam Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: change pcie interrupt orderFrank Li
Change pcie interrupt order to fix below warning. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:0: 'pme' was expected from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml# arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: pcie@3400000: interrupt-names:1: 'aer' was expected from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: rename node name "wdt" to "watchdog"Frank Li
Rename node name "wdt" to "watchdog" to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: wdt@c000000: $nodename:0: 'wdt@c000000' does not match '^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$ Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: add #dma-cells for qdmaFrank Li
Add #dma-cells for qdma to fix below warning. dma-controller@8380000: '#dma-cells' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3Frank Li
Fman3 should use 'fsl,fman-memac-mdio'. 'fsl,fman-xmdio' is for fman2. Fix below CHECK_DTBS warning. fman@1a00000: mdio@eb000:compatible: ['fsl,fman-memac-mdio', 'fsl,fman-xmdio'] is too long Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: replace node name 'nor' with 'flash'Frank Li
Replace node name 'nor' with 'flash' to fix below CHECK_DTBS warning. nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'Frank Li
Workaround already applied unconditional at commit a6ba1e453174 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally") Remove it to fix CHECK_DTBS warning: usb@2f00000: Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected) Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-singleFrank Li
Change #addres-cells to 1 and #size-cells to 0 to align binding doc requiremement. Fix below warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dtb: pinmux@70010012c: #address-cells:0:0: 1 was expected from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: add platform special compatible string for gpioFrank Li
Add platform special compatible string for all gpio controller to fix below warning. gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,qoriq-gpio'] is too short 'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio'] 'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: layerscape: rename node 'timer' as 'rtc'Frank Li
ftm_alarm is rtc. Correct the name as 'rtc' to fix DTB_CHECK warning. timer@29d0000: $nodename:0: 'timer@29d0000' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/fsl,ls-ftm-alarm.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8qxp-mek: Pass memory-region to the DSP nodeFabio Estevam
According to fsl,dsp.yaml, 'memory-region' is a required property. Pass 'memory-region' to fix the following dt-schema warning: imx8qxp-mek.dtb: dsp@596e8000: 'memory-region' is a required property Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx95-19x19-evk: add PCIe[0,1] supportFrank Li
Add PCIe[0,1] and all dependent nodes. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx95-19x19-evk: add lpi2c7 and expander gpio pcal6524Frank Li
Add lpi2c7 and expander gpio pcal6524. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] supportFrank Li
Add pcie[0,1] and pcie-ep[0,1] support. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx95: add '#address-cells' and '#size-cells' for all i2cFrank Li
Add '#address-cells' and '#size-cells' for all I2C to avoid duplicate these at every board files. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: fsl-ls1043a-rdb: use common spi-cs-setup(hold)-delay-nsFrank Li
Use SPI common properties 'spi-cs-setup-delay-ns' and 'spi-cs-hold-delay-ns', mark private properties 'fsl,spi-cs-sck-delay' and 'fsl,spi-sck-cs-delay' as deprecated. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx93-11x11-evk: reorder lpi2c2, lpi2c3, mu1 and mu2 labelJoy Zou
Reorder lpi2c2, lpi2c3, mu1 and mu2 label in alphabetical order. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx93-11x11-evk: fix duplicated lpi2c3 labelsJoy Zou
Move node "rtc@53" to existed "&lpi2c3" and remove redundant "&lpi2c3" label. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01Merge tag 'imx-fixes-6.10' into imx/dt64Shawn Guo
i.MX fixes for 6.10: - Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board. - Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase immunity against noise. - Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that SDIO cards could also work. - Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board. - Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive doesn't really delete a node in a DT overlay. - Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM. - Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in the SOM dtsi.
2024-07-01arm64: dts: imx8mp: Fix pgc vpu locationsAdam Ford
The various pgv_vpu nodes have a mismatch between the value after the @ symbol and what is referenced by 'reg' so reorder the nodes to align. Fixes: df680992dd62 ("arm64: dts: imx8mp: add vpu pgc nodes") Suggested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewd-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp-venice-gw74xx: add DP83867 configurationTim Harvey
The GW7400 has an onboard DP83867 RGMII GbE PHY: - add RGMII delay and FIFO configuration - add LED configuration required to use them via netdev trigger: two LED's (LED1 and LED2, skipping LED0). Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp-venice-gw702x: add support for PHY LED'sTim Harvey
The GW702x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mm-venice-gw700x: add support for PHY LED'sTim Harvey
The GW700x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: freescale: imx8m*-venice-*: fix gw,gsc dt-schema warningsTim Harvey
Fix the dt-schema warnings due to #address-cells/#size-cells being unnecessary when there are no children with reg cells. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Fix pgc_mlmix locationAdam Ford
The pgc_mlmix shows a power-domain@24, but the reg value is IMX8MP_POWER_DOMAIN_MLMIX which is set to 4. The stuff after the @ symbol should match the stuff referenced by 'reg' so reorder the pgc_mlmix so it to appear as power-domain@4. Fixes: 834464c8504c ("arm64: dts: imx8mp: add mlmix power domain") Fixes: 4bedc468b725 ("arm64: dts: imx8mp: Add NPU Node") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8dxl-evk: add imx8dxl_cm4, lsio mu5, related memory regionFrank Li
Add imx8dxl_cm4, lsio mu5 and related memory region. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314Martin Schmiedel
This adds support for TQMa8MPQL module on MBa8MP-RAS314 board. Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01Merge tag 'amlogic-arm64-dt-for-v6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.11: - New Boards: - OSMC Vero 4K - Dreambox One & Two - GXLX/S905L p271 Reference Boards - Amlogic A4 Power Domain - A bunch of DT fixes to allmost solve all remaining check errors - Amlogic S4 PWM - Fixes for: - SM1 SPDIF compatibles - Bump G12 SPDIF driver strength - Add power domain to HDMI TX - Correct HDMI TX clocks * tag 'amlogic-arm64-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (32 commits) arm64: dts: amlogic: setup hdmi system clock arm64: dts: amlogic: gx: correct hdmi clocks arm64: dts: amlogic: Add Amlogic S4 PWM arm64: dts: amlogic: add power domain to hdmitx arm64: dts: amlogic: g12: bump spdif output drive strength arm64: dts: amlogic: sm1: fix spdif compatibles arm64: dts: amlogic: ad402: fix thermal zone node name arm64: dts: meson: add initial support for Dreambox One/Two dt-bindings: arm: amlogic: add support for Dreambox One/Two dt-bindings: add dream vendor prefix arm64: dts: meson: add support for OSMC Vero 4K dt-bindings: arm: amlogic: add OSMC Vero 4K arm64: dts: amlogic: gxbb-odroidc2: fix invalid reset-gpio property arm64: dts: amlogic: a1: drop the invalid reset-name for usb@fe004400 arm64: dts: amlogic: a1: use correct node name for mmc controller arm64: dts: amlogic: c3: use correct compatible for gpio_intc node arm64: dts: amlogic: axg: fix tdm audio-controller clock order arm64: dts: amlogic: g12a-u200: add missing AVDD-supply to acodec arm64: dts: amlogic: g12a-u200: drop invalid sound-dai-cells arm64: dts: amlogic: sm1: fix tdm controllers compatible ... Link: https://lore.kernel.org/r/7f71e76c-c793-429a-b0ed-7296553a3eff@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01arm/arm64: dts: arm: Use generic clock and regulator nodenamesRob Herring (Arm)
With the recent defining of preferred naming for fixed clock and regulator nodes, convert the Arm Ltd. boards to use the preferred names. In the cases which had a unit-address, warnings about missing "reg" property are fixed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/20240528191536.1444649-2-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240630-arm-dts-fixes-2-v1-1-a32ba57e5b1d@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01Merge tag 'microchip-dt64-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for v6.11 It contains: - cleanups for simple-bus nodes to comply with dtbs_check * tag 'microchip-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: sparx5_pcb135: move non-MMIO nodes out of axi arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi Link: https://lore.kernel.org/r/20240629174051.665027-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20240701113010.16447-9-kabel@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01Merge tag 'renesas-dts-for-v6.11-tag2-v2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt * tag 'renesas-dts-for-v6.11-tag2-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779h0: R-Car Sound support arm64: dts: renesas: r8a779g0: Tidy up sound DT settings arm64: dts: renesas: Add interrupt-names to arch timer nodes ARM: dts: renesas: Add interrupt-names to arch timer nodes arm64: dts: renesas: r9a08g045: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g054: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g044: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g043u: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779g0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779f0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779a0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779h0: Drop "opp-shared" from opp-table-0 Link: https://lore.kernel.org/r/cover.1719837594.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01arm64: dts: exynos850: Enable TRNGSam Protsenko
Add True Random Number Generator (TRNG) node to Exynos850 SoC dtsi. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240618204523.9563-8-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-07-01riscv: dts: starfive: add PCIe dts configuration for JH7110Minda Chen
Add PCIe dts configuraion for JH7110 SoC platform. The Star64 only has one exposed PCIe port, so only the Mars and VisionFive 2 get two enabled. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> [conor: squash in star64's single exposed port] Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-07-01arm64: dts: renesas: r8a779h0: R-Car Sound supportKuninori Morimoto
Add sound support for R-Car V4M. [Kuninori: adjusted to latest upstream kernel] Co-developed-by: Khanh Le <khanh.le.xr@renesas.com> Signed-off-by: Khanh Le <khanh.le.xr@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/87ed8nkxeq.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-07-01arm64: dts: renesas: r8a779g0: Tidy up sound DT settingsKuninori Morimoto
R-Car V4H (R8A779G0) supports only 1 AUDIO_CLKOUT and 1 SSI, thus, #clock-cells / #sound-dai-cells are both fixed to zero. (#sound-dai-cells is needed for Simple-Audio-Card, but not needed for Audio-Graph-Card). Fix this up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/87frt3kxew.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-07-01arm64: dts: renesas: Add interrupt-names to arch timer nodesGeert Uytterhoeven
Add interrupt-names properties to device nodes that represent ARM architected timers for clarity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/e5e2767011322daaebcc8dd6ecfcadc6966042d5.1718890849.git.geert+renesas@glider.be
generated by cgit (git 2.34.1) at 2025-09-24 06:33:05 +0000