| Age | Commit message (Collapse) | Author |
|---|
|
When kvm_xen_evtchn_send() takes the slow path because the shinfo GPC
needs to be revalidated, it used to violate the SRCU vs. kvm->lock
locking rules and potentially cause a deadlock.
Now that lockdep is learning to catch such things, make sure that code
path is exercised by the selftest.
Link: https://lore.kernel.org/all/20230113124606.10221-2-dwmw2@infradead.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The xen_shinfo_test started off with very few iterations, and the numbers
we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values
anyway to start with.
It has since grown quite a few more tests, and it's kind of awful to be
handling them all as bare numbers. Especially when I want to add a new
test in the middle. Define an enum for the test stages, and use it both
in the guest code and the host switch statement.
No functional change, if I can count to 24.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI
(as opposed to full Xen-style hypercalls through a hypervisor provided
page). Using the common helpers dedups a pile of code, and uses the
native hypercall instruction when running on AMD.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls,
which have a different register ABI, can reuse the VMCALL vs. VMMCALL
logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230204024151.1373296-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
WARN if generating a GATag given a VM ID and vCPU ID doesn't yield the
same IDs when pulling the IDs back out of the tag. Don't bother adding
error handling to callers, this is very much a paranoid sanity check as
KVM fully controls the VM ID and is supposed to reject too-big vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask
that effectively controls the largest guest physical APIC ID supported by
x2AVIC, instead of hardcoding the number of bits to 8 (and the number of
VM bits to 24).
The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a
reference back to KVM in case the IOMMU cannot inject an interrupt into a
non-running vCPU. In such a case, the IOMMU notifies software by creating
a GALog entry with the corresponded GATag, and KVM then uses the GATag to
find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results
in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255.
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define the "physical table max index mask" as bits 8:0, not 9:0. x2AVIC
currently supports a max of 512 entries, i.e. the max index is 511, and
the inputs to GENMASK_ULL() are inclusive. The bug is benign as bit 9 is
reserved and never set by KVM, i.e. KVM is just clearing bits that are
guaranteed to be zero.
Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states
that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area. I.e.
that table wasn't updated when x2AVIC support was added.
Opportunistically fix the comment for the max AVIC ID to align with the
code, and clean up comment formatting too.
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230207002156.521736-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is
not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0)
the test will fail with a memory allocation error.
This makes it impossible to add tests that default to hugetlb-backed memory,
because on a machine with a default configuration they will fail. Therefore,
check HugePages_Total as well and, if zero, direct the user to enable hugepages
in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Code indentation should use tabs where possible and miss a '*'.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_A492CB3F9592578451154442830EA1B02C07@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Code indentation should use tabs where possible.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_31E6ACADCB6915E157CF5113C41803212107@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nested_vmx_check_controls() has already run by the time KVM checks host state,
so the "host address space size" exit control can only be set on x86-64 hosts.
Simplify the condition at the cost of adding some dead code to 32-bit kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #1
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
|
|
The RTAS work area allocator uses code that is built by
GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the
required Kconfig symbol to fix multiple build errors.
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init':
rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc':
rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free':
rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner'
Fixes: 43033bc62d34 ("powerpc/pseries: add RTAS work area allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
|
|
Add them to the SoC .dtsi, so that not every board has to specify them.
Fixes: 1225396fefea ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.
This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.
Fixes: 52c47b63412b ("bus: imx-weim: improve error handling upon child probe-failure")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add #sound-dai-cells properties to SAI nodes.
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 9e9860069725 ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'macirq' is supposed to be listed first. Also only 'snps,clk-csr' is
listed in the bindings while 'clk_csr' is only supported for legacy
reasons. See commit 83936ea8d8ad2 ("net: stmmac: add a parse for new
property 'snps,clk-csr'")
Fixes: 1f4263ea6a4b ("arm64: dts: imx93: add eqos support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The 'axi' clock are the bus APB clock, the 'disp_axi' clock are the
pixel data AXI clock. The naming is confusing. Fix the clock order.
Fixes: 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Fixes: 40ba2eda0a7b ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
A recent commit eliminated a hack that adjusted the offset used for
many GSI registers. It became possible because we now specify all
GSI register offsets explicitly for every version of IPA.
Unfortunately, a large number of register offsets were *not* updated
as they should have been in that commit. For IPA v4.5+, the offset
for every GSI register *except* the two inter-EE interrupt masking
registers were supposed to have been reduced by 0xd000.
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Fixes: 59b12b1d27f3 ("net: ipa: kill gsi->virt_raw")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230310193709.1477102-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL
frequency does not affect MII modes other than trgmii on port 5 and port 6.
So the assumption is that the operation here called "setting the PLL
frequency" actually sets the frequency of the TRGMII TX clock.
Make it so that it and the rest of the trgmii setup run only when the
trgmii mode is used.
Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec
U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230310073338.5836-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to
be supported since commit 38f790a80560 ("net: dsa: mt7530: Add support for
port 5") under mt7530_setup_port5().
Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230310073338.5836-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously we would divide total_left_rate by zero if num_vports
happened to be 1 because non_requested_count is calculated as
num_vports - req_count. Guard against this by validating num_vports at
the beginning and returning an error otherwise.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing a stress test on SMC-R by rmmod mlx5_ib driver
during the wrk/nginx test, we found that there is a probability
of triggering a panic while terminating all link groups.
This issue dues to the race between smc_smcr_terminate_all()
and smc_buf_create().
smc_smcr_terminate_all
smc_buf_create
/* init */
conn->sndbuf_desc = NULL;
...
__smc_lgr_terminate
smc_conn_kill
smc_close_abort
smc_cdc_get_slot_and_msg_send
__softirqentry_text_start
smc_wr_tx_process_cqe
smc_cdc_tx_handler
READ(conn->sndbuf_desc->len);
/* panic dues to NULL sndbuf_desc */
conn->sndbuf_desc = xxx;
This patch tries to fix the issue by always to check the sndbuf_desc
before send any cdc msg, to make sure that no null pointer is
seen during cqe processing.
Fixes: 0b29ec643613 ("net/smc: immediate termination for SMCR link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1678263432-17329-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When using a PHC in shared between multiple hosts, the previous
frequency value may not be reset and could lead to host being unable to
compensate the offset with timecounter adjustments. To avoid such state
reset the hardware frequency of PHC to zero on init. Some refactoring is
needed to make code readable.
Fixes: 85036aee1938 ("bnxt_en: Add a non-real time mode to access NIC clock")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230310151356.678059-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 732ea9db9d8a ("efi: libstub: Move screen_info handling to common
code") reorganized the earlycon handling so that all architectures pass
the screen_info data via a EFI config table instead of populating struct
screen_info directly, as the latter is only possible when the EFI stub
is baked into the kernel (and not into the decompressor).
However, this means that struct screen_info may not have been populated
yet by the time the earlycon probe takes place, and this results in a
non-functional early console.
So let's probe again right after parsing the config tables and
populating struct screen_info. Note that this means that earlycon output
starts a bit later than before, and so it may fail to capture issues
that occur while doing the early EFI initialization.
Fixes: 732ea9db9d8a ("efi: libstub: Move screen_info handling to common code")
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Merge commit bf9bec4cb3a4 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.
A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array. I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5fbe ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 380def2d4cf2 ("memory: tegra124: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.12
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 06f079816d4c ("memory: tegra-mc: Add interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
There is no longer any need to explicitly destroy node links as this is
now done when the node is destroyed as part of icc_nodes_remove().
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-17-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to trigger a NULL-pointer
deference when either a NULL pointer or not fully initialised node is
returned from exynos_generic_icc_xlate().
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Make sure to add the newly allocated interconnect node to the provider
before adding the PM QoS request so that the node is freed on errors.
Fixes: 2f95b9d5cf0b ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-15-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 4e60a9568dc6 ("interconnect: qcom: add msm8974 driver")
Cc: stable@vger.kernel.org # 5.5
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Make sure to clean up and release resources properly also in case probe
fails when populating child devices.
Fixes: 57eb14779dfd ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
Cc: stable@vger.kernel.org # 6.0
Cc: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-10-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 62feb14ee8a3 ("interconnect: qcom: Consolidate interconnect RPM support")
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Fix the report of dirty_bytes upon pre-copy to include both the existing
data on the migration file and the device extra bytes.
This gives a better close estimation to what can be passed any more as
part of pre-copy.
Fixes: 0dce165b1adf ("vfio/mlx5: Introduce vfio precopy ioctl implementation")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20230308155723.108218-1-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Prior to commit 5ee546594025 ("kconfig: change sym_change_count to a
boolean flag"), the conf_updated flag was set to the new value *before*
calling the callback. xconfig's save action depends on this behaviour,
because xconfig calls conf_get_changed() directly from the callback and
now sees the old value, thus never enabling the save button or the
shortcut.
Restore the previous behaviour.
Fixes: 5ee546594025 ("kconfig: change sym_change_count to a boolean flag")
Signed-off-by: Jurica Vukadin <jura@vukad.in>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If md_run() fails after ->active_io is initialized, then percpu_ref_exit
is called in error path. However, later md_free_disk will call
percpu_ref_exit again which leads to a panic because of null pointer
dereference. It can also trigger this bug when resources are initialized
but are freed in error path, then will be freed again in md_free_disk.
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
Workqueue: md_misc mddev_delayed_delete
RIP: 0010:free_percpu+0x110/0x630
Call Trace:
<TASK>
__percpu_ref_exit+0x44/0x70
percpu_ref_exit+0x16/0x90
md_free_disk+0x2f/0x80
disk_release+0x101/0x180
device_release+0x84/0x110
kobject_put+0x12a/0x380
kobject_put+0x160/0x380
mddev_delayed_delete+0x19/0x30
process_one_work+0x269/0x680
worker_thread+0x266/0x640
kthread+0x151/0x1b0
ret_from_fork+0x1f/0x30
For creating raid device, md raid calls do_md_run->md_run, dm raid calls
md_run. We alloc those memory in md_run. For stopping raid device, md raid
calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can
free those memory resources in __md_stop.
Fixes: 72adae23a72c ("md: Change active_io to percpu")
Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Some virtio / vhost / vdpa fixes accumulated so far"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Ignore virtio-trace/trace-agent
vdpa_sim: set last_used_idx as last_avail_idx in vdpasim_queue_ready
vhost-vdpa: free iommu domain after last use during cleanup
vdpa/mlx5: should not activate virtq object when suspended
vp_vdpa: fix the crash in hot unplug with vp_vdpa
|
|
WED is supported just for mmio devices, so do not check it for usb or
sdio devices. This patch fixes the crash reported below:
[ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.565885] wlp0s3u1i3: authenticated
[ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3)
[ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3)
[ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms)
[ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3)
[ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3)
[ 23.797450] wlp0s3u1i3: associated
[ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200
[ 24.959706] #PF: supervisor instruction fetch in kernel mode
[ 24.959788] #PF: error_code(0x0011) - permissions violation
[ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163
[ 24.959957] Oops: 0011 [#1] PREEMPT SMP
[ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18
[ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
[ 24.960191] RIP: 0010:0xffff88800c223200
[ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[ 24.961190] Call Trace:
[ 24.961219] <TASK>
[ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310
[ 24.961313] ? mt7921_set_key+0x150/0x200
[ 24.961365] ? drv_set_key+0xa9/0x1b0
[ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240
[ 24.961485] ? ieee80211_key_replace+0x3f3/0x730
[ 24.961541] ? crypto_shash_setkey+0x89/0xd0
[ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0
[ 24.961664] ? crypto_aead_setauthsize+0x31/0x50
[ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0
[ 24.961785] ? ieee80211_add_key+0x1fc/0x250
[ 24.961842] ? rdev_add_key+0x41/0x140
[ 24.961882] ? nl80211_parse_key+0x6c/0x2f0
[ 24.961940] ? nl80211_new_key+0x24a/0x290
[ 24.961984] ? genl_rcv_msg+0x36c/0x3a0
[ 24.962036] ? rdev_mod_link_station+0xe0/0xe0
[ 24.962102] ? nl80211_set_key+0x410/0x410
[ 24.962143] ? nl80211_pre_doit+0x200/0x200
[ 24.962187] ? genl_bind+0xc0/0xc0
[ 24.962217] ? netlink_rcv_skb+0xaa/0xd0
[ 24.962259] ? genl_rcv+0x24/0x40
[ 24.962300] ? netlink_unicast+0x224/0x2f0
[ 24.962345] ? netlink_sendmsg+0x30b/0x3d0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962440] ? __import_iovec+0x2e/0x110
[ 24.962482] ? ___sys_sendmsg+0xbe/0xe0
[ 24.962525] ? mod_objcg_state+0x25c/0x330
[ 24.962576] ? __dentry_kill+0x19e/0x1d0
[ 24.962618] ? call_rcu+0x18f/0x270
[ 24.962660] ? __dentry_kill+0x19e/0x1d0
[ 24.962702] ? __x64_sys_sendmsg+0x70/0x90
[ 24.962744] ? do_syscall_64+0x3d/0x80
[ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70
[ 24.962852] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 24.962913] </TASK>
[ 24.962939] Modules linked in:
[ 24.962981] CR2: ffff88800c223200
[ 24.963022] ---[ end trace 0000000000000000 ]---
[ 24.963087] RIP: 0010:0xffff88800c223200
[ 24.963323] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[ 24.963376] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[ 24.963458] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[ 24.963538] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[ 24.963622] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[ 24.963705] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[ 24.963788] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 24.963871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.963941] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[ 24.964018] note: wpa_supplicant[391] exited with irqs disabled
Fixes: d1369e515efe ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/c42168429453474213fa8244bf4b069de4531f40.1678124335.git.lorenzo@kernel.org
|
|
A number of users reported that this support was working fine before
it got removed. Add it back, but leave out the unsupported 80+80 mode.
Fixes: ac922bd60ace ("wifi: mt76: mt7915: remove BW160 and BW80+80 support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230301163739.52314-1-nbd@nbd.name
|
