summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-09RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewaitLeon Romanovsky
If cm_create_timewait_info() fails, the timewait_info pointer will contain an error value and will be used in cm_remove_remote() later. general protection fault, probably for non-canonical address 0xdffffc0000000024: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0×0000000000000120-0×0000000000000127] CPU: 2 PID: 12446 Comm: syz-executor.3 Not tainted 5.10.0-rc5-5d4c0742a60e #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:cm_remove_remote.isra.0+0x24/0×170 drivers/infiniband/core/cm.c:978 Code: 84 00 00 00 00 00 41 54 55 53 48 89 fb 48 8d ab 2d 01 00 00 e8 7d bf 4b fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <0f> b6 04 02 48 89 ea 83 e2 07 38 d0 7f 08 84 c0 0f 85 fc 00 00 00 RSP: 0018:ffff888013127918 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: ffffc9000a18b000 RDX: 0000000000000024 RSI: ffffffff82edc573 RDI: fffffffffffffff4 RBP: 0000000000000121 R08: 0000000000000001 R09: ffffed1002624f1d R10: 0000000000000003 R11: ffffed1002624f1c R12: ffff888107760c70 R13: ffff888107760c40 R14: fffffffffffffff4 R15: ffff888107760c9c FS: 00007fe1ffcc1700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ff21000 CR3: 000000010f504001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cm_destroy_id+0x189/0×15b0 drivers/infiniband/core/cm.c:1155 cma_connect_ib drivers/infiniband/core/cma.c:4029 [inline] rdma_connect_locked+0x1100/0×17c0 drivers/infiniband/core/cma.c:4107 rdma_connect+0x2a/0×40 drivers/infiniband/core/cma.c:4140 ucma_connect+0x277/0×340 drivers/infiniband/core/ucma.c:1069 ucma_write+0x236/0×2f0 drivers/infiniband/core/ucma.c:1724 vfs_write+0x220/0×830 fs/read_write.c:603 ksys_write+0x1df/0×240 fs/read_write.c:658 do_syscall_64+0x33/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20201204064205.145795-1-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-09dyndbg: fix use before null checkJim Cromie
In commit a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()"), a string is copied before checking it isn't NULL. Fix this, report a usage/interface error, and return the proper error code. Fixes: a2d375eda771 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()") Cc: stable@vger.kernel.org -- -v2 drop comment tweak, improve commit message Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20201209183625.2432329-1-jim.cromie@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09USB: UAS: introduce a quirk to set no_write_sameOliver Neukum
UAS does not share the pessimistic assumption storage is making that devices cannot deal with WRITE_SAME. A few devices supported by UAS, are reported to not deal well with WRITE_SAME. Those need a quirk. Add it to the device that needs it. Reported-by: David C. Partridge <david.partridge@perdrix.co.uk> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_hv_generic: use devm_kzalloc() for private data allocAlexandru Ardelean
This is a minor cleanup for the management of the private object of this driver. The allocation can be tied to the life-time of the hv_device object. This cleans up a bit the exit & error paths, since the object doesn't need to be explicitly free'd anymore. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119154903.82099-4-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_fsl_elbc_gpcm: use device-managed allocatorsAlexandru Ardelean
This change moves all the simple allocations to use device-managed allocator functions. This way their life-time is tied to the platform_device object, so when this gets free'd these allocations also get cleaned up. The final effect is that error & exit paths get cleaned up a bit. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119154903.82099-3-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_aec: use devm_kzalloc() for uio_info objectAlexandru Ardelean
The uio_info object is free'd last, so it's life-time is tied PCI device object. Using devm_kzalloc() cleans up the error path a bit and the exit path. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119154903.82099-2-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_cif: use devm_kzalloc() for uio_info objectAlexandru Ardelean
The uio_info object is free'd last, so it's life-time is tied PCI device object. Using devm_kzalloc() cleans up the error path a bit and the exit path. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119154903.82099-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_netx: use devm_kzalloc() for or uio_info objectAlexandru Ardelean
This change uses the devm_kzalloc() function to tie the life-time of the uio_info object to PCI device. This cleans up the exit & error path a bit. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201120084207.50736-3-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_mf624: use devm_kzalloc() for uio_info objectAlexandru Ardelean
This change uses the devm_kzalloc() function to tie the life-time of the uio_info object to PCI device. This cleans up the exit & error path a bit. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201120084207.50736-2-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_sercos3: use device-managed functions for simple allocsAlexandru Ardelean
This change converts the simple allocations [kzalloc()] to devm_kzalloc() tying the life-time of these objects to the PCI device object. It cleans up the error and exit path and bit, and does a minor correction that -ENOMEM is returned (vs -ENODEV) in case the 'priv' object cannot be allocated. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201120084207.50736-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlersAlexandru Ardelean
This moves move pm_runtime_disable on a devm_add_action_or_reset() handler. And with the use of the devm_uio_register_device() function, the remove hook is no longer required. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201120075625.12272-2-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: uio_dmem_genirq: convert simple allocations to device-managedAlexandru Ardelean
This change converts the simple allocations in the driver to used device-managed allocation functions. This removes the error path entirely in the probe function, and reduces some code in the remove function. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201120075625.12272-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio/uio_pci_generic: remove unneeded pci_set_drvdata()Alexandru Ardelean
The pci_get_drvdata() was moved during commit ef84928cff58 ("uio/uio_pci_generic: use device-managed function equivalents"). Storing a private object with pci_set_drvdata() doesn't make sense since that change, since there is no more pci_get_drvdata() call in the driver to retrieve the information. This change removes it. Fixes: ef84928cff58 ("uio/uio_pci_generic: use device-managed function equivalents") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201123143447.16829-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09uio: pruss: use devm_clk_get() for clk initAlexandru Ardelean
This change uses devm_clk_get() to obtain a reference to the clock. It has the benefit that clk_put() is no longer required, and cleans up the exit & error path. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119145059.48326-1-alexandru.ardelean@analog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09slimbus: qcom-ngd-ctrl: fix SSR dependenciesSrinivas Kandagatla
NGD should depend on QCOM_RPROC_COMMON instead of selecting it, as this will be selected by respective remoteproc driver. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201201093843.20126-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09altera-stapl: remove the unreached switch caseKaixu Xia
The value of the variable status must be one of the 0, -EIO and -EILSEQ, so the switch case -ENODATA is unreached. Remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1605284071-6901-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09fsi: Aspeed: Add mutex to protect HW accessEddie James
There is nothing to prevent multiple commands being executed simultaneously. Add a mutex to prevent this. Fixes: 606397d67f41 ("fsi: Add ast2600 master driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201120004929.185239-1-joel@jms.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09bus: fsl-mc: simplify DPRC version checkIoana Ciornei
Because the minimum supported DPRC version is 6.0, there is no need to check for incompatible 6.x versions lower to the minimum one. Just remove the second half of the check to simplify the logic. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201123164839.1668409-1-ciorneiioana@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09bus: fsl-mc: fix error return code in fsl_mc_object_allocate()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 197f4d6a4a00 ("staging: fsl-mc: fsl-mc object allocator driver") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1607068967-31991-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09bus: fsl-mc: added missing fields to dprc_rsp_get_obj_region structureLaurentiu Tudor
'type' and 'flags' fields were missing from dprc_rsp_get_obj_region structure therefore the MC Bus driver was not receiving proper flags from MC like DPRC_REGION_CACHEABLE. Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20201124111200.1391-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09bus: fsl-mc: make sure MC firmware is up and runningLaurentiu Tudor
Some bootloaders might pause the MC firmware before starting the kernel to ensure that MC will not cause faults as soon as SMMU probes due to no configuration being in place for the firmware. Make sure that MC is resumed at probe time as its SMMU setup should be done by now. Also included, a comment fix on how PL and BMT bits are packed in the StreamID. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20201105153050.19662-2-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09bus: fsl-mc: add back accidentally dropped error checkLaurentiu Tudor
A previous patch accidentally dropped an error check, so add it back. Fixes: aef85b56c3c1 ("bus: fsl-mc: MC control registers are not always available") Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20201105153050.19662-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09serial: imx: Remove unneeded of_device_get_match_data() NULL checkFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform and the NULL check on of_device_get_match_data() is no longer needed. This check was only needed when this driver supported both DT and non-DT platforms. Remove the unneeded of_device_get_match_data() NULL check. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201126124643.3371-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09soc: fix comment for freeing soc_dev_attrKrzysztof Kozlowski
The soc_dev_attr is stored soc_dev->attr during soc_device_register() so it could be used till the cleanup call: soc_device_unregister(). Therefore this memory should not be freed prior, but after unregistering soc device. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201207185952.261697-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09MAINTAINERS: Mark SPMI as maintainedStephen Boyd
I can do more than just review patches here. The plan is to pick up patches from the list and shuttle them up to gregkh. The korg tree will be used to hold the pending patches. Move the list away from linux-arm-msm to just be linux-kernel as SPMI isn't msm specific anymore. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-arm-msm@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201207214204.1284946-1-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09vme: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ca91cx42_alloc_consistent()' and 'tsi148_alloc_consistent()' GFP_KERNEL can be used because both functions are called only from 'vme_alloc_consistent()' (vme.c). This function is only called from the 'vme_user_probe()' probe function and no lock is taken in the between. When memory is allocated in 'ca91cx42_crcsr_init()' and 'tsi148_crcsr_init()' GFP_KERNEL can be used because both functions are called only from their corresponding probe function and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201206071352.21949-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: pci_endpoint_test: fix return value of error branchXiongfeng Wang
We return 'err' in the error branch, but this variable may be set as zero before. Fix it by setting 'err' as a negative value before we goto the error label. Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/1605790158-6780-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: genwqe: Use dma_set_mask_and_coherent to simplify codeChristophe JAILLET
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by an equivalent 'dma_set_mask_and_coherent()' which is much less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201201210147.7917-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: rtsx: rts5249 support runtime PMRicky Wu
rtsx_pcr: add callback functions to support runtime PM add delay_work to put device to D3 after idle over 10 sec rts5249: add extra init flow for rtd3 and set rtd3_en from config setting rtsx_pci_sdmmc: child device support autosuspend Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201202065857.19412-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: rtsx: modify and fix init_hw functionRicky Wu
changed rtsx_pci_disable_aspm() to rtsx_disable_aspm() do not access ASPM configuration directly changed pcie_capability_write_word() to _clear_and_set_word() make sure only change PCI_EXP_LNKCTL bit8 make sure ASPM disable after extra_init_hw() Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201202063228.18319-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: rtsx: modify en/disable aspm functionRicky Wu
enable/disable device ASPM function: changed write ASPM configuration directly to use write register Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201202063124.18262-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: vmw_vmci: fix kernel info-leak by initializing dbells in ↵Anant Thazhemadam
vmci_ctx_get_chkpt_doorbells() A kernel-infoleak was reported by syzbot, which was caused because dbells was left uninitialized. Using kzalloc() instead of kmalloc() fixes this issue. Reported-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com Tested-by: syzbot+a79e17c39564bedf0930@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201122224534.333471-1-anant.thazhemadam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc/sgi-xp: Replace in_interrupt() usageThomas Gleixner
The usage of in_interrupt() in xpc_partition_disengaged() is clearly intended to avoid canceling the timeout timer when the function is invoked from the timer callback. While in_interrupt() is deprecated and ill defined as it does not provide what the name suggests it catches the intended case. Add an argument to xpc_partition_disengaged() which is true if called from timer and otherwise false. Use del_timer_sync() instead of del_singleshot_timer_sync() which is the same thing. Note: This does not prevent reentrancy into the function as the function has no concurrency control and timer callback and regular task context callers can happen concurrently on different CPUs or the timer can interrupt the task context before it is able to cancel it. While the only driver which is providing the arch_xpc_ops callbacks (xpc_uv) seems not to have a reentrancy problem and the only negative effect would be a double dev_info() entry in dmesg, the whole mechanism is conceptually broken. But that's not subject of this cleanup endeavour and left as an exercise to the folks who might have interest to make that code fully correct. [bigeasy: Add the argument, use del_timer_sync().] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Cliff Whickman <cpw@sgi.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <robinmholt@gmail.com> Cc: Steve Wahl <steve.wahl@hpe.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20201119103151.ppo45mj53ulbxjx4@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09misc: isl29003: Fix typo for get/set modeZhou Xingxing
The operation of get/set mode was same with get/set resolution. It is a typo absolutely. This patch updates these bits operated by get/set mode. Signed-off-by: Zhou Xingxing <zhou_x1@hoperun.com> Link: https://lore.kernel.org/r/1607334545-2091-1-git-send-email-zhou_x1@hoperun.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: use bus_type functionsUwe Kleine-König
This works towards the goal mentioned in 2006 in commit 594c8281f905 ("[PATCH] Add bus_type probe, remove, shutdown methods."). The functions are moved to where the other bus_type functions are defined and renamed to match the already established naming scheme. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: change logic implementing platform_driver_probeUwe Kleine-König
Instead of overwriting the core driver's probe function handle probing devices for drivers loaded by platform_driver_probe() in the platform driver probe function. The intended goal is to not have to change the probe function to simplify converting the platform bus to use bus functions. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: platform: reorder functionsUwe Kleine-König
This way all callbacks and structures used to initialize platform_bus_type are defined just before platform_bus_type and in the same order. Also move platform_drv_probe_fail just before it's only user. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201119124611.2573057-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: make driver_probe_device() staticJulian Wiedmann
It's only used inside drivers/base/dd.c Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Link: https://lore.kernel.org/r/20201123111938.18968-1-jwi@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Fix a couple of typosThierry Reding
These were just some minor typos that have crept in recently and are easily fixed. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201127104630.1839171-1-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Reorder devices on successful probeThierry Reding
Device drivers usually depend on the fact that the devices that they control are suspended in the same order that they were probed in. In most cases this is already guaranteed via deferred probe. However, there's one case where this can still break: if a device is instantiated before a dependency (for example if it appears before the dependency in device tree) but gets probed only after the dependency is probed. Instantiation order would cause the dependency to get probed later, in which case probe of the original device would be deferred and the suspend/resume queue would get reordered properly. However, if the dependency is provided by a built-in driver and the device depending on that driver is controlled by a loadable module, which may only get loaded after the root filesystem has become available, we can be faced with a situation where the probe order ends up being different from the suspend/resume order. One example where this happens is on Tegra186, where the ACONNECT is listed very early in device tree (sorted by unit-address) and depends on BPMP (listed very late because it has no unit-address) for power domains and clocks/resets. If the ACONNECT driver is built-in, there is no problem because it will be probed before BPMP, causing a probe deferral and that in turn reorders the suspend/resume queue. However, if built as a module, it will end up being probed after BPMP, and therefore not result in a probe deferral, and therefore the suspend/resume queue will stay in the instantiation order. This in turn causes problems because ACONNECT will be resumed before BPMP, which will result in a hang because the ACONNECT's power domain cannot be powered on as long as the BPMP is still suspended. Fix this by always reordering devices on successful probe. This ensures that the suspend/resume queue is always in probe order and hence meets the natural expectations of drivers vs. their dependencies. Reported-by: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Rafael. J. Wysocki <rafael@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201203175756.1405564-1-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Delete pointless parameter in fwnode_operations.add_linksSaravana Kannan
The struct device input to add_links() is not used for anything. So delete it. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-18-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Refactor fw_devlink featureSaravana Kannan
The current implementation of fw_devlink is very inefficient because it tries to get away without creating fwnode links in the name of saving memory usage. Past attempts to optimize runtime at the cost of memory usage were blocked with request for data showing that the optimization made significant improvement for real world scenarios. We have those scenarios now. There have been several reports of boot time increase in the order of seconds in this thread [1]. Several OEMs and SoC manufacturers have also privately reported significant (350-400ms) increase in boot time due to all the parsing done by fw_devlink. So this patch uses all the setup done by the previous patches in this series to refactor fw_devlink to be more efficient. Most of the code has been moved out of firmware specific (DT mostly) code into driver core. This brings the following benefits: - Instead of parsing the device tree multiple times during bootup, fw_devlink parses each fwnode node/property only once and creates fwnode links. The rest of the fw_devlink code then just looks at these fwnode links to do rest of the work. - Makes it much easier to debug probe issue due to fw_devlink in the future. fw_devlink=on blocks the probing of devices if they depend on a device that hasn't been added yet. With this refactor, it'll be very easy to tell what that device is because we now have a reference to the fwnode of the device. - Much easier to add fw_devlink support to ACPI and other firmware types. A refactor to move the common bits from DT specific code to driver core was in my TODO list as a prerequisite to adding ACPI support to fw_devlink. This series gets that done. [1] - https://lore.kernel.org/linux-omap/ea02f57e-871d-cd16-4418-c1da4bbc4696@ti.com/ Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-17-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09efi: Update implementation of add_links() to create fwnode linksSaravana Kannan
The semantics of add_links() has changed from creating device link between devices to creating fwnode links between fwnodes. So, update the implementation of add_links() to match the new semantics. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-16-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09of: property: Update implementation of add_links() to create fwnode linksSaravana Kannan
The semantics of add_links() has changed from creating device link between devices to creating fwnode links between fwnodes. So, update the implementation of add_links() to match the new semantics. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-15-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Use device's fwnode to check if it is waiting for suppliersSaravana Kannan
To check if a device is still waiting for its supplier devices to be added, we used to check if the devices is in a global waiting_for_suppliers list. Since the global list will be deleted in subsequent patches, this patch stops using this check. Instead, this patch uses a more device specific check. It checks if the device's fwnode has any fwnode links that haven't been converted to device links yet. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-14-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Add fw_devlink_parse_fwtree()Saravana Kannan
This function is a wrapper around fwnode_operations.add_links(). This function parses each node in a fwnode tree and create fwnode links for each of those nodes. The information for creating the fwnode links (the supplier and consumer fwnode) is obtained by parsing the properties in each of the fwnodes. This function also ensures that no fwnode is parsed more than once by marking the fwnodes as parsed. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-13-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Redefine the meaning of fwnode_operations.add_links()Saravana Kannan
Change the meaning of fwnode_operations.add_links() to just create fwnode links by parsing the properties of a given fwnode. This patch doesn't actually make any code changes. To keeps things more digestable, the actual functional changes come in later patches in this series. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-12-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09device property: Add fwnode_is_ancestor_of() and fwnode_get_next_parent_dev()Saravana Kannan
Add fwnode_is_ancestor_of() helper function to check if a fwnode is an ancestor of another fwnode. Add fwnode_get_next_parent_dev() helper function that take as input a fwnode and finds the closest ancestor fwnode that has a corresponding struct device and returns that struct device. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-11-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Allow only unprobed consumers for SYNC_STATE_ONLY device linksSaravana Kannan
SYNC_STATE_ONLY device links only affect the behavior of sync_state() callbacks. Specifically, they prevent sync_state() only callbacks from being called on a device if one or more of its consumers haven't probed. So, creating a SYNC_STATE_ONLY device link from an already probed consumer is useless. So, don't allow creating such device links. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-10-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09driver core: Add fwnode link supportSaravana Kannan
Add support for creating supplier-consumer links between fwnodes. It is intended for internal use the driver core and generic firmware support code (eg. Device Tree, ACPI), so it is simple by design and the API provided is limited. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201121020232.908850-9-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 05:09:32 +0000