summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-12ALSA: hda - fix the 'Capture Switch' value change notificationsJaroslav Kysela
The original code in the cap_put_caller() function does not handle correctly the positive values returned from the passed function for multiple iterations. It means that the change notifications may be lost. Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213851 Cc: <stable@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210811161441.1325250-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-12Merge branch 'dsa-cross-chip-notifiers'David S. Miller
Vladimir Oltean says: ==================== Improvements to the DSA tag_8021q cross-chip notifiers This series improves cross-chip notifier error messages and addresses a benign error message seen during reboot on a system with disjoint DSA trees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12net: dsa: tag_8021q: don't broadcast during setup/teardownVladimir Oltean
Currently, on my board with multiple sja1105 switches in disjoint trees described in commit f66a6a69f97a ("net: dsa: permit cross-chip bridging between all trees in the system"), rebooting the board triggers the following benign warnings: [ 12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT [ 12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT [ 12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT [ 12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT [ 12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT [ 12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT Basically switch 1 calls dsa_tag_8021q_unregister, and switch 1's TX and RX VLANs cannot be found on switch 2's CPU port. But why would switch 2 even attempt to delete switch 1's TX and RX tag_8021q VLANs from its CPU port? Well, because we use dsa_broadcast, and it is supposed that it had added those VLANs in the first place (because in dsa_port_tag_8021q_vlan_match, all CPU ports match regardless of their tree index or switch index). The two trees probe asynchronously, and when switch 1 probed, it called dsa_broadcast which did not notify the tree of switch 2, because that didn't probe yet. But during unbind, switch 2's tree _is_ probed, so it _is_ notified of the deletion. Before jumping to introduce a synchronization mechanism between the probing across disjoint switch trees, let's take a step back and see whether we _need_ to do that in the first place. The RX and TX VLANs of switch 1 would be needed on switch 2's CPU port only if switch 1 and 2 were part of a cross-chip bridge. And dsa_tag_8021q_bridge_join takes care precisely of that (but if probing was synchronous, the bridge_join would just end up bumping the VLANs' refcount, because they are already installed by the setup path). Since by the time the ports are bridged, all DSA trees are already set up, and we don't need the tag_8021q VLANs of one switch installed on the other switches during probe time, the answer is that we don't need to fix the synchronization issue. So make the setup and teardown code paths call dsa_port_notify, which notifies only the local tree, and the bridge code paths call dsa_broadcast, which let the other trees know as well. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12net: dsa: print more information when a cross-chip notifier failsVladimir Oltean
Currently this error message does not say a lot: [ 32.693498] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT [ 32.699725] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT [ 32.705931] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT [ 32.712139] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT [ 32.718347] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT [ 32.724554] DSA: failed to notify tag_8021q VLAN deletion: -ENOENT but in this form, it is immediately obvious (at least to me) what the problem is, even without further looking at the code: [ 12.345566] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 1088 deletion: -ENOENT [ 12.353804] sja1105 spi2.0: port 0 failed to notify tag_8021q VLAN 2112 deletion: -ENOENT [ 12.362019] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 1089 deletion: -ENOENT [ 12.370246] sja1105 spi2.0: port 1 failed to notify tag_8021q VLAN 2113 deletion: -ENOENT [ 12.378466] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 1090 deletion: -ENOENT [ 12.386683] sja1105 spi2.0: port 2 failed to notify tag_8021q VLAN 2114 deletion: -ENOENT Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12drm/doc/rfc: drop lmem uapi sectionDaniel Vetter
We still have quite a bit more work to do with overall reworking of the ttm-based dg1 code, but the uapi stuff is now finalized with the latest pull. So remove that. This also fixes kerneldoc build warnings because we've included the same headers in two places, resulting in sphinx complaining about duplicated symbols. This regression has been created when we moved the uapi definitions to the real include/uapi/ folder in 727ecd99a4c9 ("drm/doc/rfc: drop the i915_gem_lmem.h header") v2: Fix a few references that I missed, the htmldocs build took forever. Acked-by: Jason Ekstrand <jason@jlekstrand.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by Stephen Rothwell <sfr@canb.auug.org.au> (v1) References: https://lore.kernel.org/dri-devel/20210603193242.1ce99344@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 727ecd99a4c9 ("drm/doc/rfc: drop the i915_gem_lmem.h header") Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210810142748.1983271-1-daniel.vetter@ffwll.ch (cherry picked from commit dae2d28832968751f7731336b560a4a84a197b76) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-08-12drm/i915: Only access SFC_DONE when media domain is not fused offMatt Roper
The SFC_DONE register lives within the corresponding VD0/VD2/VD4/VD6 forcewake domain and is not accessible if the vdbox in that domain is fused off and the forcewake is not initialized. This mistake went unnoticed because until recently we were using the wrong register offset for the SFC_DONE register; once the register offset was corrected, we started hitting errors like <4> [544.989065] i915 0000:cc:00.0: Uninitialized forcewake domain(s) 0x80 accessed at 0x1ce000 on parts with fused-off vdbox engines. Fixes: e50dbdbfd9fb ("drm/i915/tgl: Add SFC instdone to error state") Fixes: 9c9c6d0ab08a ("drm/i915: Correct SFC_DONE register offset") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210806174130.1058960-1-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit c5589bb5dccb0c5cb74910da93663f489589f3ce) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Changed Fixes tag to match the cherry-picked 82929a2140eb]
2021-08-12wwan: core: Unshadow error code returned by ida_alloc_range()Andy Shevchenko
ida_alloc_range() may return other than -ENOMEM error code. Unshadow it in the wwan_create_port(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12drm/i915/display: Fix the 12 BPC bits for PIPE_MISC regAnkit Nautiyal
Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the Dithering BPC, with valid values of 6, 8, 10 BPC. For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid values of: 6, 8, 10, 12 BPC, and need to be programmed whether dithering is enabled or not. This patch: -corrects the bits 5-7 for PIPE MISC register for 12 BPC. -renames the bits and mask to have generic names for these bits for dithering bpc and port output bpc. v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout for pipe_bpp. (Uma Shankar) v2: Added 'display' to the subject and fixes tag. (Uma Shankar) Fixes: 756f85cffef2 ("drm/i915/bdw: Broadwell has PIPEMISC") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210811051857.109723-1-ankit.k.nautiyal@intel.com (cherry picked from commit 70418a68713c13da3f36c388087d0220b456a430) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-08-12net: dsa: sja1105: unregister the MDIO buses during teardownVladimir Oltean
The call to sja1105_mdiobus_unregister is present in the error path but absent from the main driver unbind path. Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12net: dsa: mt7530: fix VLAN traffic leaks againDENG Qingfang
When a port leaves a VLAN-aware bridge, the current code does not clear other ports' matrix field bit. If the bridge is later set to VLAN-unaware mode, traffic in the bridge may leak to that port. Remove the VLAN filtering check in mt7530_port_bridge_leave. Fixes: 474a2ddaa192 ("net: dsa: mt7530: fix VLAN traffic leaks") Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12net: phy: nxp-tja11xx: log critical health stateOleksij Rempel
TJA1102 provides interrupt notification for the critical health states like overtemperature and undervoltage. The overtemperature bit is set if package temperature is beyond 155C°. This functionality was tested by heating the package up to 200C° The undervoltage bit is set if supply voltage drops beyond some critical threshold. Currently not tested. In a typical use case, both of this events should be logged and stored (or send to some remote system) for further investigations. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12Merge branch 'pktgen-imix'David S. Miller
Nick Richardson says: ==================== pktgen: Add IMIX mode Adds internet mix (IMIX) mode to pktgen. Internet mix is included in many user-space network perf testing tools. It allows for the user to specify a distribution of discrete packet sizes to be generated. This type of test is common among vendors when perf testing their devices. [RFC link: https://datatracker.ietf.org/doc/html/rfc2544#section-9.1] This allows users to get a more complete picture of how their device will perform in the real-world. This feature adds a command that allows users to specify an imix distribution in the following format: imix_weights size_1,weight_1 size_2,weight_2 ... size_n,weight_n The distribution of packets with size_i will be (weight_i / total_weights) where total_weights = weight_1 + weight_2 + ... + weight_n For example: imix_weights 40,7 576,4 1500,1 The pkt_size "40" will account for 7 / (7 + 4 + 1) = ~58% of the total packets sent. This patch was tested with the following: 1. imix_weights = 40,7 576,4 1500,1 2. imix_weights = 0,7 576,4 1500,1 - Packet size of 0 is resized to the minimum, 42 3. imix_weights = 40,7 576,4 1500,1 count = 0 - Zero count. - Runs until user stops pktgen. Invalid Configurations 1. clone_skb = 200 imix_weights = 40,7 576,4 1500,1 - Returns error code -524 (-ENOTSUPP) when setting imix_weights 2. len(imix_weights) > MAX_IMIX_ENTRIES - Returns -7 (-E2BIG) This patch is split into three parts, each provide different aspects of required functionality: 1. Parse internet mix input. 2. Add IMIX Distribution representation. 3. Process and output IMIX results. Changes in v2: * Remove __ prefix outside of uAPI. * Use seq_puts instead of seq_printf where necessary. * Reorder variable declaration. * Return -EINVAL instead of -ENOTSUPP when using IMIX with clone_skb > 0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12pktgen: Add output for imix resultsNick Richardson
The bps for imix mode is calculated by: sum(imix_entry.size) / time_elapsed The actual counts of each imix_entry are displayed under the "Current:" section of the interface output in the following format: imix_size_counts: size_1,count_1 size_2,count_2 ... size_n,count_n Example (count = 200000): imix_weights: 256,1 859,3 205,2 imix_size_counts: 256,32082 859,99796 205,68122 Result: OK: 17992362(c17964678+d27684) usec, 200000 (859byte,0frags) 11115pps 47Mb/sec (47977140bps) errors: 0 Summary of changes: Calculate bps based on imix counters when in IMIX mode. Add output for IMIX counters. Signed-off-by: Nick Richardson <richardsonnick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12pktgen: Add imix distribution binsNick Richardson
In order to represent the distribution of imix packet sizes, a pre-computed data structure is used. It features 100 (IMIX_PRECISION) "bins". Contiguous ranges of these bins represent the respective packet size of each imix entry. This is done to avoid the overhead of selecting the correct imix packet size based on the corresponding weights. Example: imix_weights 40,7 576,4 1500,1 total_weight = 7 + 4 + 1 = 12 pkt_size 40 occurs 7/total_weight = 58% of the time pkt_size 576 occurs 4/total_weight = 33% of the time pkt_size 1500 occurs 1/total_weight = 9% of the time We generate a random number between 0-100 and select the corresponding packet size based on the specified weights. Eg. random number = 358723895 % 100 = 65 Selects the packet size corresponding to index:65 in the pre-computed imix_distribution array. An example of the pre-computed array is below: The imix_distribution will look like the following: 0 -> 0 (index of imix_entry.size == 40) 1 -> 0 (index of imix_entry.size == 40) 2 -> 0 (index of imix_entry.size == 40) [...] -> 0 (index of imix_entry.size == 40) 57 -> 0 (index of imix_entry.size == 40) 58 -> 1 (index of imix_entry.size == 576) [...] -> 1 (index of imix_entry.size == 576) 90 -> 1 (index of imix_entry.size == 576) 91 -> 2 (index of imix_entry.size == 1500) [...] -> 2 (index of imix_entry.size == 1500) 99 -> 2 (index of imix_entry.size == 1500) Create and use "bin" representation of the imix distribution. Signed-off-by: Nick Richardson <richardsonnick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12pktgen: Parse internet mix (imix) inputNick Richardson
Adds "imix_weights" command for specifying internet mix distribution. The command is in this format: "imix_weights size_1,weight_1 size_2,weight_2 ... size_n,weight_n" where the probability that packet size_i is picked is: weight_i / (weight_1 + weight_2 + .. + weight_n) The user may provide up to 100 imix entries (size_i,weight_i) in this command. The user specified imix entries will be displayed in the "Params" section of the interface output. Values for clone_skb > 0 is not supported in IMIX mode. Summary of changes: Add flag for enabling internet mix mode. Add command (imix_weights) for internet mix input. Return -ENOTSUPP when clone_skb > 0 in IMIX mode. Display imix_weights in Params. Create data structures to store imix entries and distribution. Signed-off-by: Nick Richardson <richardsonnick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12pinctrl: amd: Fix an issue with shutdown when system set to s0ixMario Limonciello
IRQs are getting armed on shutdown causing the system to immediately wake back up. Link: https://lkml.org/lkml/2021/8/2/1114 Reported-by: nix.or.die@googlemail.com Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> CC: Raul E Rangel <rrangel@chromium.org> Fixes: d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20210809201513.12367-1-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-12Revert "tipc: Return the correct errno code"Hoang Le
This reverts commit 0efea3c649f0 because of: - The returning -ENOBUF error is fine on socket buffer allocation. - There is side effect in the calling path tipc_node_xmit()->tipc_link_xmit() when checking error code returning. Fixes: 0efea3c649f0 ("tipc: Return the correct errno code") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12net: mscc: Fix non-GPL export of regmap APIsMark Brown
The ocelot driver makes use of regmap, wrapping it with driver specific operations that are thin wrappers around the core regmap APIs. These are exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap exports which is frowned upon. Add _GPL suffixes to at least the APIs that are doing register I/O. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-12Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"Georgi Djakov
This reverts commit f84f5b6f72e68bbaeb850b58ac167e4a3a47532a, which is causing regressions on some platforms, preventing them to boot or do a clean reboot. This is because the above commit is sending also all the zero bandwidth requests to turn off any resources that might be enabled unnecessarily, but currently this may turn off interconnects that are enabled by default, but with no consumer to keep them on. Let's revert this for now as some platforms are not ready for such change yet. In the future we can introduce some _ignore_unused option that could keep also the unused resources on platforms that have only partial interconnect support and also add .shutdown callbacks to deal with disabling the resources in the right order. Reported-by: Stephen Boyd <swboyd@chromium.org> Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CAE-0n52iVgX0JjjnYi=NDg49xP961p=+W5R2bmO+2xwRceFhfA@mail.gmail.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-11Merge tag 'orphans-v5.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull orphan section linker fix from Kees Cook: - Handle changes to Clang's Sanitizer section layout (Nathan Chancellor) * tag 'orphans-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: vmlinux.lds.h: Handle clang's module.{c,d}tor sections
2021-08-11Merge tag 'seccomp-v5.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: - Fix typo in user notification documentation (Rodrigo Campos) - Fix userspace counter report when using TSYNC (Hsuan-Chi Kuo, Wiktor Garbacz) * tag 'seccomp-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Fix setting loaded filter count during TSYNC Documentation: seccomp: Fix typo in user notification
2021-08-12Merge tag 'amd-drm-fixes-5.14-2021-08-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-08-11: amdgpu: - Yellow carp update - RAS EEPROM fixes - BACO/BOCO fixes - Fix a memory leak in an error path - Freesync fix - VCN harvesting fix - Display fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210812022153.4005-1-alexander.deucher@amd.com
2021-08-11net: bridge: vlan: fix global vlan option range dumpingNikolay Aleksandrov
When global vlan options are equal sequentially we compress them in a range to save space and reduce processing time. In order to have the proper range end id we need to update range_end if the options are equal otherwise we get ranges with the same end vlan id as the start. Fixes: 743a53d9636a ("net: bridge: vlan: add support for dumping global vlan options") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210810092139.11700-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11mctp: Specify route types, require rtm_type in RTM_*ROUTE messagesJeremy Kerr
This change adds a 'type' attribute to routes, which can be parsed from a RTM_NEWROUTE message. This will help to distinguish local vs. peer routes in a future change. This means userspace will need to set a correct rtm_type in RTM_NEWROUTE and RTM_DELROUTE messages; we currently only accept RTN_UNICAST. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20210810023834.2231088-1-jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12drm/mediatek: Add component_del in OVL and COLOR remove functionjason-jh.lin
Add component_del in OVL and COLOR remove function. Fixes: ff1395609e20 ("drm/mediatek: Move mtk_ddp_comp_init() from sub driver to DRM driver") Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-08-11net: igmp: increase size of mr_ifc_countEric Dumazet
Some arches support cmpxchg() on 4-byte and 8-byte only. Increase mr_ifc_count width to 32bit to fix this problem. Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12drm/mediatek: Add AAL output size configurationjason-jh.lin
To avoid the output width and height is incorrect, AAL_OUTPUT_SIZE configuration should be set. Fixes: 0664d1392c26 ("drm/mediatek: Add AAL engine basic function") Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-08-11net: hns3: add support for triggering reset by ethtoolYufeng Mo
Currently, four reset types are supported for the HNS3 ethernet driver: IMP reset, global reset, function reset, and FLR. Only FLR can now be triggered by the user. To restore the device when an exception occurs, add support for triggering reset by ethtool. Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to trigger the IMP | global | function reset manually. In addition, VF can only trigger function reset. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11MAINTAINERS: switch to my OMP email for Renesas Ethernet driversSergey Shtylyov
I'm still going to continue looking after the Renesas Ethernet drivers and device tree bindings. Now my new employer, Open Mobile Platform (OMP), will pay for all my upstream work. Let's switch to my OMP email for the reviews. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/9c212711-a0d7-39cd-7840-ff7abf938da1@omp.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11tcp_bbr: fix u32 wrap bug in round logic if bbr_init() called after 2B packetsNeal Cardwell
Currently if BBR congestion control is initialized after more than 2B packets have been delivered, depending on the phase of the tp->delivered counter the tracking of BBR round trips can get stuck. The bug arises because if tp->delivered is between 2^31 and 2^32 at the time the BBR congestion control module is initialized, then the initialization of bbr->next_rtt_delivered to 0 will cause the logic to believe that the end of the round trip is still billions of packets in the future. More specifically, the following check will fail repeatedly: !before(rs->prior_delivered, bbr->next_rtt_delivered) and thus the connection will take up to 2B packets delivered before that check will pass and the connection will set: bbr->round_start = 1; This could cause many mechanisms in BBR to fail to trigger, for example bbr_check_full_bw_reached() would likely never exit STARTUP. This bug is 5 years old and has not been observed, and as a practical matter this would likely rarely trigger, since it would require transferring at least 2B packets, or likely more than 3 terabytes of data, before switching congestion control algorithms to BBR. This patch is a stable candidate for kernels as far back as v4.9, when tcp_bbr.c was added. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Kevin Yang <yyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11Merge branch 'bonding-cleanup-header-file-and-error-msgs'Jakub Kicinski
Jonathan Toppins says: ==================== bonding: cleanup header file and error msgs Two small patches removing unreferenced symbols and unifying error messages across netlink and printk. ==================== Link: https://lore.kernel.org/r/cover.1628650079.git.jtoppins@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11bonding: combine netlink and console error messagesJonathan Toppins
There seems to be no reason to have different error messages between netlink and printk. It also cleans up the function slightly. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11bonding: remove extraneous definitions from bonding.hJonathan Toppins
All of the symbols either only exist in bond_options.c or nowhere at all. These symbols were verified to not exist in the code base by using `git grep` and their removal was verified by compiling bonding.ko. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11net: pcs: xpcs: fix error handling on failed to allocate memoryWong Vee Khee
Drivers such as sja1105 and stmmac that call xpcs_create() expects an error returned by the pcs-xpcs module, but this was not the case on failed to allocate memory. Fixed this by returning an -ENOMEM instead of a NULL pointer. Fixes: 3ad1d171548e ("net: dsa: sja1105: migrate to xpcs for SGMII") Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210810085812.1808466-1-vee.khee.wong@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11net: mscc: Fix non-GPL export of regmap APIsMark Brown
The ocelot driver makes use of regmap, wrapping it with driver specific operations that are thin wrappers around the core regmap APIs. These are exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap exports which is frowned upon. Add _GPL suffixes to at least the APIs that are doing register I/O. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210810123748.47871-1-broonie@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11net: linkwatch: fix failure to restore device state across suspend/resumeWilly Tarreau
After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed that my Ethernet port to which a bond and a VLAN interface are attached appeared to remain up after resuming from suspend with the cable unplugged (and that problem still persists with 5.10-LTS). It happens that the following happens: - the network driver (e1000e here) prepares to suspend, calls e1000e_down() which calls netif_carrier_off() to signal that the link is going down. - netif_carrier_off() adds a link_watch event to the list of events for this device - the device is completely stopped. - the machine suspends - the cable is unplugged and the machine brought to another location - the machine is resumed - the queued linkwatch events are processed for the device - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events are silently dropped - the device is resumed with its link down - the upper VLAN and bond interfaces are never notified that the link had been turned down and remain up - the only way to provoke a change is to physically connect the machine to a port and possibly unplug it. The state after resume looks like this: $ ip -br li | egrep 'bond|eth' bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> Placing an explicit call to netdev_state_change() either in the suspend or the resume code in the NIC driver worked around this but the solution is not satisfying. The issue in fact really is in link_watch that loses events while it ought not to. It happens that the test for the device being present was added by commit 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") in 4.20 to avoid an access to devices that are not present. Instead of dropping events, this patch proceeds slightly differently by postponing their handling so that they happen after the device is fully resumed. Fixes: 124eee3f6955 ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") Link: https://lists.openwall.net/netdev/2018/03/15/62 Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-11cfi: Use rcu_read_{un}lock_sched_notraceElliot Berman
If rcu_read_lock_sched tracing is enabled, the tracing subsystem can perform a jump which needs to be checked by CFI. For example, stm_ftrace source is enabled as a module and hooks into enabled ftrace events. This can cause an recursive loop where find_shadow_check_fn -> rcu_read_lock_sched -> (call to stm_ftrace generates cfi slowpath) -> find_shadow_check_fn -> rcu_read_lock_sched -> ... To avoid the recursion, either the ftrace codes needs to be marked with __no_cfi or CFI should not trace. Use the "_notrace" in CFI to avoid tracing so that CFI can guard ftrace. Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Cc: stable@vger.kernel.org Fixes: cf68fffb66d6 ("add support for Clang CFI") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210811155914.19550-1-quic_eberman@quicinc.com
2021-08-11Revert "block/mq-deadline: Add cgroup support"Tejun Heo
This reverts commit 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") and a follow-up commit c06bc5a3fb42 ("block/mq-deadline: Remove a WARN_ON_ONCE() call"). The added cgroup support has the following issues: * It breaks cgroup interface file format rule by adding custom elements to a nested key-value file. * It registers mq-deadline as a cgroup-aware policy even though all it's doing is collecting per-cgroup stats. Even if we need these stats, this isn't the right way to add them. * It hasn't been reviewed from cgroup side. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-11vmlinux.lds.h: Handle clang's module.{c,d}tor sectionsNathan Chancellor
A recent change in LLVM causes module_{c,d}tor sections to appear when CONFIG_K{A,C}SAN are enabled, which results in orphan section warnings because these are not handled anywhere: ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_ctor) is being placed in '.text.asan.module_ctor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.asan.module_dtor) is being placed in '.text.asan.module_dtor' ld.lld: warning: arch/x86/pci/built-in.a(legacy.o):(.text.tsan.module_ctor) is being placed in '.text.tsan.module_ctor' Fangrui explains: "the function asan.module_ctor has the SHF_GNU_RETAIN flag, so it is in a separate section even with -fno-function-sections (default)". Place them in the TEXT_TEXT section so that these technologies continue to work with the newer compiler versions. All of the KASAN and KCSAN KUnit tests continue to pass after this change. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1432 Link: https://github.com/llvm/llvm-project/commit/7b789562244ee941b7bf2cefeb3fc08a59a01865 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Fangrui Song <maskray@google.com> Acked-by: Marco Elver <elver@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210731023107.1932981-1-nathan@kernel.org
2021-08-11Merge branch 'for-5.14/dax' into libnvdimm-fixesDan Williams
Pick up some small dax cleanups that make some of Ira's follow on work easier.
2021-08-11tools/testing/nvdimm: Fix missing 'fallthrough' warningDan Williams
Use "fallthrough;" to address: tools/testing/nvdimm/test/nfit.c: In function ‘nd_intel_test_finish_query’: tools/testing/nvdimm/test/nfit.c:436:37: warning: this statement may fall through [-Wimplicit-fallthrough=] 436 | fw->missed_activate = false; | ~~~~~~~~~~~~~~~~~~~~^~~~~~~ tools/testing/nvdimm/test/nfit.c:438:9: note: here 438 | case FW_STATE_UPDATED: | ^~~~ Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/162767522046.3313209.14767278726893995797.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-08-11libnvdimm/region: Fix label activation vs errorsDan Williams
There are a few scenarios where init_active_labels() can return without registering deactivate_labels() to run when the region is disabled. In particular label error injection creates scenarios where a DIMM is disabled, but labels on other DIMMs in the region become activated. Arrange for init_active_labels() to always register deactivate_labels(). Reported-by: Krzysztof Kensicki <krzysztof.kensicki@intel.com> Cc: <stable@vger.kernel.org> Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation.") Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/162766356450.3223041.1183118139023841447.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-08-11ACPI: NFIT: Fix support for virtual SPA rangesDan Williams
Fix the NFIT parsing code to treat a 0 index in a SPA Range Structure as a special case and not match Region Mapping Structures that use 0 to indicate that they are not mapped. Without this fix some platform BIOS descriptions of "virtual disk" ranges do not result in the pmem driver attaching to the range. Details: In addition to typical persistent memory ranges, the ACPI NFIT may also convey "virtual" ranges. These ranges are indicated by a UUID in the SPA Range Structure of UUID_VOLATILE_VIRTUAL_DISK, UUID_VOLATILE_VIRTUAL_CD, UUID_PERSISTENT_VIRTUAL_DISK, or UUID_PERSISTENT_VIRTUAL_CD. The critical difference between virtual ranges and UUID_PERSISTENT_MEMORY, is that virtual do not support associations with Region Mapping Structures. For this reason the "index" value of virtual SPA Range Structures is allowed to be 0. If a platform BIOS decides to represent NVDIMMs with disconnected "Region Mapping Structures" (range-index == 0), the kernel may falsely associate them with standalone ranges where the "SPA Range Structure Index" is also zero. When this happens the driver may falsely require labels where "virtual disks" are expected to be label-less. I.e. "label-less" is where the namespace-range == region-range and the pmem driver attaches with no user action to create a namespace. Cc: Jacek Zloch <jacek.zloch@intel.com> Cc: Lukasz Sobieraj <lukasz.sobieraj@intel.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Cc: <stable@vger.kernel.org> Fixes: c2f32acdf848 ("acpi, nfit: treat virtual ramdisk SPA as pmem region") Reported-by: Krzysztof Rusocki <krzysztof.rusocki@intel.com> Reported-by: Damian Bassa <damian.bassa@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/162870796589.2521182.1240403310175570220.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-08-11seccomp: Fix setting loaded filter count during TSYNCHsuan-Chi Kuo
The desired behavior is to set the caller's filter count to thread's. This value is reported via /proc, so this fixes the inaccurate count exposed to userspace; it is not used for reference counting, etc. Signed-off-by: Hsuan-Chi Kuo <hsuanchikuo@gmail.com> Link: https://lore.kernel.org/r/20210304233708.420597-1-hsuanchikuo@gmail.com Co-developed-by: Wiktor Garbacz <wiktorg@google.com> Signed-off-by: Wiktor Garbacz <wiktorg@google.com> Link: https://lore.kernel.org/lkml/20210810125158.329849-1-wiktorg@google.com Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status")
2021-08-11bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpersYonghong Song
Currently, if bpf_get_current_cgroup_id() or bpf_get_current_ancestor_cgroup_id() helper is called with sleepable programs e.g., sleepable fentry/fmod_ret/fexit/lsm programs, a rcu warning may appear. For example, if I added the following hack to test_progs/test_lsm sleepable fentry program test_sys_setdomainname: --- a/tools/testing/selftests/bpf/progs/lsm.c +++ b/tools/testing/selftests/bpf/progs/lsm.c @@ -168,6 +168,10 @@ int BPF_PROG(test_sys_setdomainname, struct pt_regs *regs) int buf = 0; long ret; + __u64 cg_id = bpf_get_current_cgroup_id(); + if (cg_id == 1000) + copy_test++; + ret = bpf_copy_from_user(&buf, sizeof(buf), ptr); if (len == -2 && ret == 0 && buf == 1234) copy_test++; I will hit the following rcu warning: include/linux/cgroup.h:481 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by test_progs/260: #0: ffffffffa5173360 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xa0 stack backtrace: CPU: 1 PID: 260 Comm: test_progs Tainted: G O 5.14.0-rc2+ #176 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x56/0x7b bpf_get_current_cgroup_id+0x9c/0xb1 bpf_prog_a29888d1c6706e09_test_sys_setdomainname+0x3e/0x89c bpf_trampoline_6442469132_0+0x2d/0x1000 __x64_sys_setdomainname+0x5/0x110 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae I can get similar warning using bpf_get_current_ancestor_cgroup_id() helper. syzbot reported a similar issue in [1] for syscall program. Helper bpf_get_current_cgroup_id() or bpf_get_current_ancestor_cgroup_id() has the following callchain: task_dfl_cgroup task_css_set task_css_set_check and we have #define task_css_set_check(task, __c) \ rcu_dereference_check((task)->cgroups, \ lockdep_is_held(&cgroup_mutex) || \ lockdep_is_held(&css_set_lock) || \ ((task)->flags & PF_EXITING) || (__c)) Since cgroup_mutex/css_set_lock is not held and the task is not existing and rcu read_lock is not held, a warning will be issued. Note that bpf sleepable program is protected by rcu_read_lock_trace(). The above sleepable bpf programs are already protected by migrate_disable(). Adding rcu_read_lock() in these two helpers will silence the above warning. I marked the patch fixing 95b861a7935b ("bpf: Allow bpf_get_current_ancestor_cgroup_id for tracing") which added bpf_get_current_ancestor_cgroup_id() to tracing programs in 5.14. I think backporting 5.14 is probably good enough as sleepable progrems are not widely used. This patch should fix [1] as well since syscall program is a sleepable program protected with migrate_disable(). [1] https://lore.kernel.org/bpf/0000000000006d5cab05c7d9bb87@google.com/ Fixes: 95b861a7935b ("bpf: Allow bpf_get_current_ancestor_cgroup_id for tracing") Reported-by: syzbot+7ee5c2c09c284495371f@syzkaller.appspotmail.com Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210810230537.2864668-1-yhs@fb.com
2021-08-11net/mlx5e: Make use of netdev_warn()Cai Huoqing
to replace printk(KERN_WARNING ...) with netdev_warn() kindly Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Fix variable type to match 64bitEran Ben Elisha
Fix the following smatch warning: wait_func_handle_exec_timeout() warn: should '1 << ent->idx' be a 64 bit type? Use 1ULL, to have a 64 bit type variable. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Initialize numa node for all core devicesParav Pandit
Subsequent patches make use of numa node affinity for memory allocations. Initialize it for PCI PF, VF and SF devices. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Allocate individual capabilityParav Pandit
Currently mlx5_core_dev contains array of capabilities. It contains 19 valid capabilities of the device, 2 reserved entries and 12 holes. Due to this for 14 unused entries, mlx5_core_dev allocates 14 * 8K = 112K bytes of memory which is never used. Due to this mlx5_core_dev structure size is 270Kbytes odd. This allocation further aligns to next power of 2 to 512Kbytes. By skipping non-existent entries, (a) 112Kbyte is saved, (b) mlx5_core_dev reduces to 8KB with alignment (c) 350KB saved in alignment In future individual capability allocation can be used to skip its allocation when such capability is disabled at the device level. This patch prepares mlx5_core_dev to hold capability using a pointer instead of inline array. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-11net/mlx5: Reorganize current and maximal capabilities to be per-typeParav Pandit
In the current code, the current and maximal capabilities are maintained in separate arrays which are both per type. In order to allow the creation of such a basic structure as a dynamically allocated array, we move curr and max fields to a unified structure so that specific capabilities can be allocated as one unit. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-10-02 08:10:58 +0000