summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-19Merge tag 'omap-for-v5.14/gpt12-fix-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fix for omap gpt12 timer error handling Two of the recent fixes for ti-sysc driver had bad interaction for a function return value that caused one of the fixes to not work so we need to change the return value handling. Otherwise early beagleboard variants still have a boot issue. * tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix error handling for sysc_check_active_timer() Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-19PCI/sysfs: Use correct variable for the legacy_mem sysfs objectKrzysztof Wilczyński
Two legacy PCI sysfs objects "legacy_io" and "legacy_mem" were updated to use an unified address space in the commit 636b21b50152 ("PCI: Revoke mappings like devmem"). This allows for revocations to be managed from a single place when drivers want to take over and mmap() a /dev/mem range. Following the update, both of the sysfs objects should leverage the iomem_get_mapping() function to get an appropriate address range, but only the "legacy_io" has been correctly updated - the second attribute seems to be using a wrong variable to pass the iomem_get_mapping() function to. Thus, correct the variable name used so that the "legacy_mem" sysfs object would also correctly call the iomem_get_mapping() function. Fixes: 636b21b50152 ("PCI: Revoke mappings like devmem") Link: https://lore.kernel.org/r/20210812132144.791268-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-08-19PCI: Increase D3 delay for AMD Renoir/Cezanne XHCIMarcin Bachry
The Renoir XHCI controller apparently doesn't resume reliably with the standard D3hot-to-D0 delay. Increase it to 20ms. [Alex: I talked to the AMD USB hardware team and the AMD Windows team and they are not aware of any HW errata or specific issues. The HW works fine in Windows. I was told Windows uses a rather generous default delay of 100ms for PCI state transitions.] Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com Signed-off-by: Marcin Bachry <hegel666@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Prike Liang <prike.liang@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
2021-08-19MAINTAINERS: Add Jim Quinlan et al as Broadcom STB PCIe maintainersJim Quinlan
Add Jim Quinlan, Nicolas Saenz Julienne, and Florian Fainelli as maintainers of the Broadcom STB PCIe controller driver. This driver is also included in these entries: BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE BROADCOM BCM7XXX ARM ARCHITECTURE which cover the Raspberry Pi specifics of the PCIe driver. Link: https://lore.kernel.org/r/20210818225031.8502-1-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-08-19Bluetooth: btusb: Remove WAKEUP_DISABLE and add WAKEUP_AUTOSUSPEND for ↵Max Chou
Realtek devices For the commit of 9e45524a011107a73bc2cdde8370c61e82e93a4d, wakeup is always disabled for Realtek devices. However, there's the capability for Realtek devices to apply USB wakeup. In this commit, remove WAKEUP_DISABLE feature for Realtek devices. If users would switch wakeup, they should access "/sys/bus/usb/.../power/wakeup" In this commit, it also adds the feature as WAKEUP_AUTOSUSPEND for Realtek devices because it should set do_remote_wakeup on autosuspend. Signed-off-by: Max Chou <max.chou@realtek.com> Tested-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-19Bluetooth: mgmt: Pessimize compile-time bounds-checkKees Cook
After gaining __alloc_size hints, GCC thinks it can reach a memcpy() with eir_len == 0 (since it can't see into the rewrite of status). Instead, check eir_len == 0, avoiding this future warning: In function 'eir_append_data', inlined from 'read_local_oob_ext_data_complete' at net/bluetooth/mgmt.c:7210:12: ./include/linux/fortify-string.h:54:29: warning: '__builtin_memcpy' offset 5 is out of the bounds [0, 3] [-Warray-bounds] ... net/bluetooth/hci_request.h:133:2: note: in expansion of macro 'memcpy' 133 | memcpy(&eir[eir_len], data, data_len); | ^~~~~~ Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-19IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()Tuo Li
kmalloc_array() is called to allocate memory for tx->descp. If it fails, the function __sdma_txclean() is called: __sdma_txclean(dd, tx); However, in the function __sdma_txclean(), tx-descp is dereferenced if tx->num_desc is not zero: sdma_unmap_desc(dd, &tx->descp[0]); To fix this possible null-pointer dereference, assign the return value of kmalloc_array() to a local variable descp, and then assign it to tx->descp if it is not NULL. Otherwise, go to enomem. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUSLukas Bulwahn
In Kconfig, references to config symbols do not use the prefix "CONFIG_". Commit fa0cf568fd76 ("RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw") selects config CONFIG_AUXILIARY_BUS in config INFINIBAND_IRDMA, but intended to select config AUXILIARY_BUS. Fixes: fa0cf568fd76 ("RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iw") Link: https://lore.kernel.org/r/20210817084158.10095-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19RDMA/bnxt_re: Add missing spin lock initializationNaresh Kumar PBS
Add the missing initialization of srq lock. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19can: c_can: cache frames to operate as a true FIFODario Binacchi
As reported by a comment in the c_can_start_xmit() this was not a FIFO. C/D_CAN controller sends out the buffers prioritized so that the lowest buffer number wins. What did c_can_start_xmit() do if head was less tail in the tx ring ? It waited until all the frames queued in the FIFO was actually transmitted by the controller before accepting a new CAN frame to transmit, even if the FIFO was not full, to ensure that the messages were transmitted in the order in which they were loaded. By storing the frames in the FIFO without requiring its transmission, we will be able to use the full size of the FIFO even in cases such as the one described above. The transmission interrupt will trigger their transmission only when all the messages previously loaded but stored in less priority positions of the buffers have been transmitted. Link: https://lore.kernel.org/r/20210807130800.5246-5-dariobin@libero.it Suggested-by: Gianluca Falavigna <gianluca.falavigna@inwind.it> Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: c_can: support tx ring algorithmDario Binacchi
The algorithm is already used successfully by other CAN drivers (e.g. mcp251xfd). Its implementation was kindly suggested to me by Marc Kleine-Budde following a patch I had previously submitted. You can find every detail at https://lore.kernel.org/patchwork/patch/1422929/. The idea is that after this patch, it will be easier to patch the driver to use the message object memory as a true FIFO. Link: https://lore.kernel.org/r/20210807130800.5246-4-dariobin@libero.it Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: c_can: exit c_can_do_tx() early if no frames have been sentDario Binacchi
The c_can_poll() handles RX/TX events unconditionally. It may therefore happen that c_can_do_tx() is called unnecessarily because the interrupt was triggered by the reception of a frame. In these cases, we avoid to execute unnecessary statements and exit immediately. Link: https://lore.kernel.org/r/20210807130800.5246-3-dariobin@libero.it Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: c_can: remove struct c_can_priv::priv fieldDario Binacchi
It references the clock but it is never used. So let's remove it. Link: https://lore.kernel.org/r/20210807130800.5246-2-dariobin@libero.it Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: c_can: rename IF_RX -> IF_NAPIMarc Kleine-Budde
The C_CAN/D_CAN cores implement 2 interfaces to manage the message objects. To avoid concurrency and the need for locking one interface is used in the TX path (IF_TX). While the other one, named IF_RX is used from NAPI context only. As this interface is not only used to manage RX, but also TX message objects, this patch renames IF_RX to IF_NAPI. Link: https://lore.kernel.org/r/20210809080608.171545-1-mkl@pengutronix.de Cc: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: c_can: c_can_do_tx(): fix typo in commentMarc Kleine-Budde
This patch fixes a typo in the comment in c_can_do_tx(). Fixes: eddf67115040 ("can: c_can: add a comment about IF_RX interface's use") Link: https://lore.kernel.org/r/20210806105127.103302-1-mkl@pengutronix.de Cc: Dario Binacchi <dariobin@libero.it> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19dt-bindings: net: can: c_can: convert to json-schemaDario Binacchi
Convert the Bosch C_CAN/D_CAN controller device tree binding documentation to json-schema. Document missing properties. Remove "ti,hwmods" as it is no longer used in TI dts. Make "clocks" required as it is used in all dts. Update the examples. Link: https://lore.kernel.org/r/20210805192750.9051-1-dariobin@libero.it Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: m_can: Batch FIFO writes during CAN transmitMatt Kline
Give FIFO writes the same treatment as reads to avoid fixed costs of individual transfers on a slow bus (e.g., tcan4x5x). Link: https://lore.kernel.org/r/20210817050853.14875-4-matt@bitbashing.io Signed-off-by: Matt Kline <matt@bitbashing.io> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: m_can: Batch FIFO reads during CAN receiveMatt Kline
On peripherals communicating over a relatively slow SPI line (e.g. tcan4x5x), individual transfers have high fixed costs. This causes the driver to spend most of its time waiting between transfers and severely limits throughput. Reduce these overheads by reading more than one word at a time. Writing could get a similar treatment in follow-on commits. Link: https://lore.kernel.org/r/20210817050853.14875-3-matt@bitbashing.io Signed-off-by: Matt Kline <matt@bitbashing.io> [mkl: remove __packed from struct id_and_dlc] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: m_can: Disable IRQs on FIFO bus errorsMatt Kline
If FIFO reads or writes fail due to the underlying regmap (e.g., SPI) I/O, propagate that up to the m_can driver, log an error, and disable interrupts, similar to the mcp251xfd driver. While reworking the FIFO functions to add this error handling, add support for bulk reads and writes of multiple registers. Link: https://lore.kernel.org/r/20210817050853.14875-2-matt@bitbashing.io Signed-off-by: Matt Kline <matt@bitbashing.io> [mkl: re-wrap long lines, remove WARN_ON, convert to netdev block comments] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: m_can: fix block comment styleMarc Kleine-Budde
This patch fixes the commenting style in the m_can driver. Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Fixes: df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") Link: https://lore.kernel.org/r/20210819111703.599686-2-mkl@pengutronix.de Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: tcan4x5x: cdev_to_priv(): remove stray empty lineMarc Kleine-Budde
This patch removes a stray empty line in the cdev_to_priv() function. Fixes: ac33ffd3e2b0 ("can: m_can: let m_can_class_allocate_dev() allocate driver specific private data") Link: https://lore.kernel.org/r/20210819111703.599686-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: rcar_canfd: Add support for RZ/G2L familyLad Prabhakar
CANFD block on RZ/G2L SoC is almost identical to one found on R-Car Gen3 SoC's. On RZ/G2L SoC interrupt sources for each channel are split into different sources and the IP doesn't divide (1/2) CANFD clock within the IP. This patch adds compatible string for RZ/G2L family and splits the irq handlers to accommodate both RZ/G2L and R-Car Gen3 SoC's. Link: https://lore.kernel.org/r/20210727133022.634-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> [mkl: fixed typo: recieve -> receive, thanks Geert] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoCLad Prabhakar
Add CANFD binding documentation for Renesas RZ/G2L SoC. Link: https://lore.kernel.org/r/20210727133022.634-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: mcp251xfd: mark some instances of struct mcp251xfd_priv as constMarc Kleine-Budde
With the patch 07ff4aed015c ("time/timecounter: Mark 1st argument of timecounter_cyc2time() as const") some instances of the struct mcp251xfd_priv can be marked as const. This patch marks these as const. Link: https://lore.kernel.org/r/20210813091027.159379-1-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msgVincent Mailhol
The documentation of struct es58x_fd_tx_conf_msg explains in details the different TDC parameters. However, those description are redundant with the documentation of struct can_tdc. Remove most of the description. Also, fixes a typo in the reference to the datasheet (E701 -> E70). Link: https://lore.kernel.org/r/20210815033248.98111-8-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19MAINTAINERS: add Vincent MAILHOL as maintainer for the ETAS ES58X CAN/USB driverVincent Mailhol
Adding myself (Vincent Mailhol) as a maintainer for the ETAS ES58X CAN/USB driver. Link: https://lore.kernel.org/r/20210814093353.74391-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: netlink: allow user to turn off unsupported featuresVincent Mailhol
The sanity checks on the control modes will reject any request related to an unsupported features, even turning it off. Example on an interface which does not support CAN-FD: $ ip link set can0 type can bitrate 500000 fd off RTNETLINK answers: Operation not supported This patch lets such command go through (but requests to turn on an unsupported feature are, of course, still denied). Link: https://lore.kernel.org/r/20210815033248.98111-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19can: dev: provide optional GPIO based termination supportOleksij Rempel
For CAN buses to work, a termination resistor has to be present at both ends of the bus. This resistor is usually 120 Ohms, other values may be required for special bus topologies. This patch adds support for a generic GPIO based CAN termination. The resistor value has to be specified via device tree, and it can only be attached to or detached from the bus. By default the termination is not active. Link: https://lore.kernel.org/r/20210818071232.20585-4-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19dt-bindings: can: fsl,flexcan: enable termination-* bindingsOleksij Rempel
Enable termination-* binding and provide validation example for it. Link: https://lore.kernel.org/r/20210818071232.20585-3-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19dt-bindings: can-controller: add support for termination-gpiosOleksij Rempel
Some boards provide GPIO controllable termination resistor. Provide binding to make use of it. Link: https://lore.kernel.org/r/20210818071232.20585-2-o.rempel@pengutronix.de Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-08-19RDMA/uverbs: Track dmabuf memory regionsGal Pressman
The dmabuf memory registrations are missing the restrack handling and hence do not appear in rdma tool. Fixes: bfe0cc6eb249 ("RDMA/uverbs: Add uverbs command for dma-buf based MR registration") Link: https://lore.kernel.org/r/20210812135607.6228-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19RDMA/mlx5: Fix crash when unbind multiport slaveMaor Gottlieb
Fix the below crash when deleting a slave from the unaffiliated list twice. First time when the slave is bound to the master and the second when the slave is unloaded. Fix it by checking if slave is unaffiliated (doesn't have ib device) before removing from the list. RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib] Call Trace: auxiliary_bus_remove+0x18/0x30 __device_release_driver+0x177/x220 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18a/0x3e0 mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core] mlx5_unregister_device+0x34/0x60 [mlx5_core] mlx5_uninit_one+0x32/0x100 [mlx5_core] remove_one+0x6e/0xe0 [mlx5_core] pci_device_remove+0x36/0xa0 __device_release_driver+0x177/0x220 device_driver_detach+0x3c/0xa0 unbind_store+0x113/0x130 kernfs_fop_write_iter+0x110/0x1a0 new_sync_write+0x116/0x1a0 vfs_write+0x1ba/0x260 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 93f8244431ad ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus") Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-19net: ethernet: ti: cpsw: make array stpa static const, makes object smallerColin Ian King
Don't populate the array stpa on the stack but instead it static const. Makes the object code smaller by 81 bytes: Before: text data bss dec hex filename 54993 17248 0 72241 11a31 ./drivers/net/ethernet/ti/cpsw_new.o After: text data bss dec hex filename 54784 17376 0 72160 119e0 ./drivers/net/ethernet/ti/cpsw_new.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19net: hns3: make array spec_opcode static const, makes object smallerColin Ian King
Don't populate the array spec_opcode on the stack but instead it static const. Makes the object code smaller by 158 bytes: Before: text data bss dec hex filename 12271 3976 128 16375 3ff7 .../hisilicon/hns3/hns3pf/hclge_cmd.o After: text data bss dec hex filename 12017 4072 128 16217 3f59 .../hisilicon/hns3/hns3pf/hclge_cmd.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19hinic: make array speeds static const, makes object smallerColin Ian King
Don't populate the array speeds on the stack but instead it static const. Makes the object code smaller by 17 bytes: Before: text data bss dec hex filename 39987 14200 64 54251 d3eb .../huawei/hinic/hinic_sriov.o After: text data bss dec hex filename 39906 14264 64 54234 d3da .../huawei/hinic/hinic_sriov.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge branch 'indirect-qdisc-order'David S. Miller
Eli Cohen says: ==================== Indirect dev ingress qdisc creation order The first patch is just a cleanup of the code. The second patch is fixing the dependency in ingress qdisc creation relative to offloading driver registration to filter configurations. v1 -> v2: Fix warning - variable set but not used ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19net: Fix offloading indirect devices dependency on qdisc order creationEli Cohen
Currently, when creating an ingress qdisc on an indirect device before the driver registered for callbacks, the driver will not have a chance to register its filter configuration callbacks. To fix that, modify the code such that it keeps track of all the ingress qdiscs that call flow_indr_dev_setup_offload(). When a driver calls flow_indr_dev_register(), go through the list of tracked ingress qdiscs and call the driver callback entry point so as to give it a chance to register its callback. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19net/core: Remove unused field from struct flow_indr_devEli Cohen
rcu field is not used. Remove it. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19net: mii: make mii_ethtool_gset() return voidPavel Skripkin
mii_ethtool_gset() does not return any errors. Since there are no users of this function that rely on its return value, it can be made void. Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19net: pch_gbe: remove mii_ethtool_gset() error handlingPavel Skripkin
mii_ethtool_gset() does not return any errors, so error handling can be omitted to make code more simple. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge branch 'r8152-bp-settings'David S. Miller
Hayes Wang says: ==================== r8152: fix bp settings Fix the wrong bp settings of the firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19r8152: fix the maximum number of PLA bp for RTL8153CHayes Wang
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19r8152: fix writing USB_BP2_ENHayes Wang
The register of USB_BP2_EN is 16 bits, so we should use ocp_write_word(), not ocp_write_byte(). Fixes: 9370f2d05a2a ("support request_firmware for RTL8153") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge branch 'mptcp-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Bug fixes Here are two bug fixes for the net tree: Patch 1 fixes a memory leak that could be encountered when clearing the list of advertised MPTCP addresses. Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure both peers correctly understand that the full MPTCP connection handshake has completed even when the server side quickly sends an ADD_ADDR option. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19mptcp: full fully established support after ADD_ADDRMatthieu Baerts
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR with HMAC from the server, it is enough to switch to a "fully established" mode because it has received more MPTCP options. It was then OK to enable the "fully_established" flag on the MPTCP socket. Still, best to check if the ADD_ADDR looks valid by looking if it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received while we are not in "fully established" mode, it is strange and then we should not switch to this mode now. But that is not enough. On one hand, the path-manager has be notified the state has changed. On the other hand, the "fully_established" flag on the subflow socket should be turned on as well not to re-send the MP_CAPABLE 3rd ACK content with the next ACK. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19mptcp: fix memory leak on address flushPaolo Abeni
The endpoint cleanup path is prone to a memory leak, as reported by syzkaller: BUG: memory leak unreferenced object 0xffff88810680ea00 (size 64): comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s) hex dump (first 32 bytes): 58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de Xu}<...."....... 01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00 ................ backtrace: [<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline] [<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170 [<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 [<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] [<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 [<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 [<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 [<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 [<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 [<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline] [<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724 [<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403 [<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457 [<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 [<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae We should not require an allocation to cleanup stuff. Rework the code a bit so that the additional RCU work is no more needed. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge branch 'ravb-gbit'David S. Miller
Biju Das says: ==================== ravb: Add Gigabit Ethernet driver support The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are similar to the R-Car Ethernet AVB IP. The Gigabit Ethernet IP consists of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). With a few changes in the driver we can support both IPs. Currently a runtime decision based on the chip type is used to distinguish the HW differences between the SoC families. This patch series is in preparation for supporting the RZ/G2L SoC by replacing driver data chip type with struct ravb_hw_info by moving chip type to it and also adding gstrings_stats, gstrings_size, net_hw_features, net_features, aligned_tx, stats_len, max_rx_len variables to it. This patch also adds the feature bit for {RX, TX} clock internal delays and TX counters HW features found on R-Car Gen3 to struct ravb_hw_info. This patch series is based on net-next. v2->v3: * Removed num_gstat_queue variable from struct ravb_hw_info. * started using unsigned int for num_tx_desc variable in struct ravb_private * split the patch 'Add struct ravb_hw_info to driver data' into two * Renamed skb_sz to max_rx_len and tx_drop_cntrs to tx_counters and also updated the comments. v1->v2: * Replaced driver data chip type with struct ravb_hw_info * Added gstrings_stats, gstrings_size, net_hw_features, net_features, num_gstat_queue, num_tx_desc, stats_len, skb_sz to struct ravb_hw_info * Added internal_delay and tx_drop_cntrs hw feature bit to struct ravb_hw_info RFC->V1 * Incorporated feedback from Andrew, Sergei, Geert and Prabhakar * https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=515525 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add tx_counters to struct ravb_hw_infoBiju Das
The register for retrieving TX counters is present only on R-Car Gen3 and RZ/G2L; it is not present on R-Car Gen2. Add the tx_counters hw feature bit to struct ravb_hw_info, to enable this feature specifically for R-Car Gen3 now and later extend it to RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add internal delay hw feature to struct ravb_hw_infoBiju Das
R-Car Gen3 supports TX and RX clock internal delay modes, whereas R-Car Gen2 and RZ/G2L do not support it. Add an internal_delay hw feature bit to struct ravb_hw_info to enable this only for R-Car Gen3. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add net_features and net_hw_features to struct ravb_hw_infoBiju Das
On R-Car the checksum calculation on RX frames is done by the E-MAC module, whereas on RZ/G2L it is done by the TOE. TOE calculates the checksum of received frames from E-MAC and outputs it to DMAC. TOE also calculates the checksum of transmission frames from DMAC and outputs it E-MAC. Add net_features and net_hw_features to struct ravb_hw_info, to support subsequent SoCs without any code changes in the ravb_probe function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 02:05:22 +0000