summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-07reset: uniphier-glue: Add AHCI reset control support in glue layerKunihiko Hayashi
Add a reset line included in AHCI glue layer to enable AHCI core implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07dt-bindings: reset: uniphier: Add AHCI core reset descriptionKunihiko Hayashi
Add compatible strings for reset control of AHCI core implemented in UniPhier SoCs. The reset control belongs to AHCI glue layer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-usb3: Rename to reset-uniphier-glueKunihiko Hayashi
This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07dt-bindings: reset: uniphier: Replace the expression of USB3 with generic ↵Kunihiko Hayashi
peripherals Replace the expression of "USB3 glue layer" with the glue layer of the generic peripherals to allow other devices to use it. The reset control belongs to this glue layer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07ARM: socfpga: dts: document "altr,stratix10-rst-mgr" bindingDinh Nguyen
"altr,stratix10-rst-mgr" is used for the Stratix10 reset manager. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: socfpga: add an early reset driver for SoCFPGADinh Nguyen
Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: fix null pointer dereference on dev by dev_nameColin Ian King
The call to dev_name will dereference dev, however, dev is later being null checked, so there is a possibility of a null pointer dereference on dev by the call to dev_name. Fix this by null checking dev first before the call to dev_name Detected by CoverityScan, CID#1475475 ("Dereference before null check") Fixes: 2a6cb2b1d83b ("reset: Add reset_control_get_count()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: Add reset_control_get_count()Geert Uytterhoeven
Currently the reset core has internal support for counting the number of resets for a device described in DT. Generalize this to devices using lookup resets, and export it for public use. This will be used by generic drivers that need to be sure a device is controlled by a single, dedicated reset line (e.g. vfio-platform). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: fixed a typo in reset_control_get_count comment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: Improve reset controller kernel docsGeert Uytterhoeven
Grammar and indentation fixes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: dropped "shared among" -> "shared between"] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07ARC: HSDK: improve reset driverEugeniy Paltsev
As for today HSDK reset driver implements only .reset() callback. In case of driver which implements one of standard reset controller usage pattern (call *_deassert() in probe(), call *_assert() in remove()) that leads to inoperability of this reset driver. Improve HSDK reset driver by calling .reset() callback inside of .deassert() callback to avoid each reset controller user adaptation for work with both reset methods (reset() and {.assert() & .deassert()} pair) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07USB: serial: simple: add Motorola Tetra TPG2200 device idMax Schulze
Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9016 Rev=24.16 S: Manufacturer=Motorola Solutions, Inc. S: Product=TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple Signed-off-by: Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-01-07arm64: dts: stratix10: Add Stratix10 SMMU supportThor Thayer
Now there are device tree clocks for the ARM64 SMMU, add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-01-07rds: use DIV_ROUND_UP instead of ceilJacob Wen
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07r8169: don't try to read counters if chip is in a PCI power-save stateHeiner Kallweit
Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07staging: rtl8188eu: Fix module loading from tasklet for WEP encryptionLarry Finger
Commit 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a WEP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") Cc: Stable <stable@vger.kernel.org> # v4.17+ Cc: Michael Straube <straube.linux@gmail.com> Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07staging: rtl8188eu: Fix module loading from tasklet for CCMP encryptionLarry Finger
Commit 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a CCMP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") Cc: Stable <stable@vger.kernel.org> # v4.17+ Reported-and-tested-by: Michael Straube <straube.linux@gmail.com> Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07Documentation/features: Add csky kernel featuresGuo Ren
core/ cBPF-JIT : TODO | core/ eBPF-JIT : TODO | core/ generic-idle-thread : ok | core/ jump-labels : TODO | core/ tracehook : ok | debug/ KASAN : TODO | debug/ gcov-profile-all : TODO | debug/ kgdb : TODO | debug/ kprobes-on-ftrace : TODO | debug/ kprobes : TODO | debug/ kretprobes : TODO | debug/ optprobes : TODO | debug/ stackprotector : TODO | debug/ uprobes : TODO | debug/ user-ret-profiler : TODO | io/ dma-contiguous : ok | locking/ cmpxchg-local : TODO | locking/ lockdep : TODO | locking/ queued-rwlocks : ok | locking/ queued-spinlocks : TODO | locking/ rwsem-optimized : TODO | perf/ kprobes-event : TODO | perf/ perf-regs : TODO | perf/ perf-stackdump : TODO | sched/ membarrier-sync-core : TODO | sched/ numa-balancing : .. | seccomp/ seccomp-filter : TODO | time/ arch-tick-broadcast : TODO | time/ clockevents : ok | time/ context-tracking : TODO | time/ irq-time-acct : TODO | time/ modern-timekeeping : ok | time/ virt-cpuacct : TODO | vm/ ELF-ASLR : TODO | vm/ PG_uncached : TODO | vm/ THP : .. | vm/ batch-unmap-tlb-flush: TODO | vm/ huge-vmap : TODO | vm/ ioremap_prot : TODO | vm/ numa-memblock : .. | vm/ pte_special : TODO | Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-01-07soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}Biju Das
The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on RZ/G2E ES1.0 corrected the parent domains. However, the 3DG-{A,B} power domains were still initialized and powered in the wrong order, causing 3DG operation to fail. Fix this by changing the order in the table at runtime, when running on an affected SoC. This work is based on the work done by Geert for R-Car E3. Fixes: f37d211c687588328 ("soc: renesas: rcar-sysc: Add r8a774c0 support") Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'Christophe JAILLET
Fix a cut'n'paste typo. Checking 'master->sysclk' is expected here. Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-07can: gw: ensure DLC boundaries after CAN frame modificationOliver Hartkopp
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN frame modification rule that makes the data length code a higher value than the available CAN frame data size. In combination with a configured checksum calculation where the result is stored relatively to the end of the data (e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in skb_shared_info) can be rewritten which finally can cause a system crash. Michael Kubecek suggested to drop frames that have a DLC exceeding the available space after the modification process and provided a patch that can handle CAN FD frames too. Within this patch we also limit the length for the checksum calculations to the maximum of Classic CAN data length (8). CAN frames that are dropped by these additional checks are counted with the CGW_DELETED counter which indicates misconfigurations in can-gw rules. This fixes CVE-2019-3701. Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com> Reported-by: Marcus Meissner <meissner@suse.de> Suggested-by: Michal Kubecek <mkubecek@suse.cz> Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v3.2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07net/mlx4: replace pci_{,un}map_sg with dma_{,un}map_sgStephen Warren
pci_{,un}map_sg are deprecated and replaced by dma_{,un}map_sg. This is especially relevant since the rest of the driver uses the DMA API. Fix the driver to use the replacement APIs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07net/mlx4: Get rid of page operation after dma_alloc_coherentStephen Warren
This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent(). This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get rid of page operation after dma_alloc_coherent"). Based-on-code-from: Christoph Hellwig <hch@lst.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07mtd: Check add_mtd_device() ret codeBoris Brezillon
add_mtd_device() can fail. We should always check its return value and gracefully handle the failure case. Fix the call sites where this not done (in mtdpart.c) and add a __must_check attribute to the prototype to avoid this kind of mistakes. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-07mtd: Fix the check on nvmem_register() ret codeBoris Brezillon
Commit 20167b70c894 ("nvmem: use EOPNOTSUPP instead of ENOSYS") changed the nvmem_register() ret code from ENOSYS to EOPNOTSUPP when CONFIG_NVMEM is not enabled, but the check in mtd_nvmem_add() was not adjusted accordingly. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Alban Bedel <albeu@free.fr> Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-07Merge branch 'regmap-4.21' into regmap-5.0Mark Brown
2019-01-07ARM: shmobile: fix build regressionsArnd Bergmann
A number of Kconfig options have become available now to random ARM platforms outside of ARCH_MULTIPLATFORM, which now causes Kconfig warnings, and other build errors when those select options that lack additional dependencies, e.g.: WARNING: unmet direct dependencies detected for HAVE_ARM_ARCH_TIMER Depends on [n]: CPU_V7 [=n] Selected by [y]: - ARCH_RCAR_GEN2 [=y] && SOC_RENESAS [=y] - ARCH_R8A73A4 [=y] && SOC_RENESAS [=y] && ARM [=y] WARNING: unmet direct dependencies detected for SYS_SUPPORTS_EM_STI Depends on [n]: GENERIC_CLOCKEVENTS [=n] Selected by [y]: - ARCH_EMEV2 [=y] && SOC_RENESAS [=y] && ARM [=y] Put the old dependency on ARCH_RENESAS back for the moment to restore the previous behavior. Fixes: 062887bf5ef7 ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07arm64: dts: renesas: r8a77995: draak: Set better backlight levelsLaurent Pinchart
The backlight levels provided in the Draak DT produce a perceived brightness very biased towards high brightness. Use better brightness levels based on the CIE 1931 formula. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07arm64: dts: renesas: r8a77990: ebisu: Add backlightLaurent Pinchart
Add the backlight device for the LVDS1 output, in preparation for panel support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: r8a7743: Fix sorting of rwdt nodeBiju Das
Watchdog node is incorrectly placed on r8a7743 SoC dtsi. This patch fixes the sorting order. Fixes: b5beb5d4c81c358f50a8310108 ("ARM: dts: r8a7743: Add watchdog support to SoC dtsi") Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: r8a7743: Remove aliases from SoC dtsiBiju Das
This patch removes aliases from SoC dtsi tree. Device aliases are board-specific, if needed define it in board dts rather than SoC dtsi. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: r8a7743: Remove generic compatible string from iic3Biju Das
The iic3 block on RZ/G1M does not support automatic transmission, unlike other R-Car SoC's. So dropping the compatibility with the generic version. Fixes: f523405f2a22cc0c307 ("ARM: dts: r8a7743: Add IIC cores to dtsi") Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: r8a7744: Fix sorting of vsp and msiof nodesBiju Das
This patch fixes sorting of vsp and msiof nodes. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: iwg23s-sbc: Enable RTCBiju Das
Enable NXP pcf85263 real time clock for the iWave SBC based on RZ/G1C. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ARM: dts: stout: Convert to new LVDS DT bindingsGeert Uytterhoeven
As of commit 6d2ca85279becdff ("dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings"), the internal LVDS encoder has DT bindings separate from the DU. The Lager device tree was ported over to the new model, but the Stout device tree was forgotten. Fixes: 15a1ff30d8f9bd83 ("ARM: dts: r8a7790: Convert to new LVDS DT bindings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-07ACPI / PMIC: xpower: Fix TS-pin current-source handlingHans de Goede
The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-07ALSA: hda/realtek - Support Dell headset mode for New AIO platformKailang Yang
Dell has new platform for ALC274. This will support to enable headset mode. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07MAINTAINERS: Add entry for staging driver r8188euLarry Finger
This entry was missed when the driver was added. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-07ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirksHui Peng
In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Always check descriptor sizes in parser codeTakashi Iwai
There are a few places where we access the data without checking the actual object size from the USB audio descriptor. This may result in OOB access, as recently reported. This patch addresses these missing checks. Most of added codes are simple bLength checks in the caller side. For the input and output terminal parsers, we put the length check in the parser functions. For the input terminal, a new argument is added to distinguish between UAC1 and the rest, as they treat different objects. Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reported-by: Hui Peng <benquike@163.com> Tested-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Check mixer unit descriptors more strictlyTakashi Iwai
We've had some sanity checks of the mixer unit descriptors but they are too loose and some corner cases are overlooked. Add more strict checks in uac_mixer_unit_get_channels() for avoiding possible OOB accesses by malformed descriptors. This also changes the semantics of uac_mixer_unit_get_channels() slightly. Now it returns zero for the cases where the descriptor lacks of bmControls instead of -EINVAL. Then the caller side skips the mixer creation for such unit while it keeps parsing it. This corresponds to the case like Maya44. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit()Takashi Iwai
The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-07ARM: dts: sun7i: bananapi: Add GPIO banks regulatorsMaxime Ripard
The bananapi has all its bank regulators tied to the 3v3 static regulator. Make sure it's properly represented. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-07ARM: dts: sun4i-a10: Add PMU nodeHarald Geyer
This is necessary to use 'perf' for cache profiling etc. Tested on cubieboard with 'perf stat echo foo'. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-07arm64: dts: allwinner: a64: Add PMU nodeHarald Geyer
This is necessary to use 'perf' for cache profiling etc. Tested on Teres I Laptop. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-07watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugsDan Carpenter
These functions return NULL on error but we accidentally check for IS_ERR() instead. Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-01-07watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problemNeilBrown
These files need #include <linux/mod_devicetable.h> to compile correctly. Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h") Signed-off-by: NeilBrown <neil@brown.name> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-01-07gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interruptsHans de Goede
acpi_gpiochip_alloc_event only continues allocating an event and adding it to the list if gpiochip_request_own_desc does not return an error. So events with an error desc are never placed on the events list and this check is really not necessary. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-07arm64: dts: rockchip: enable analog audio node for rock64Katsuhiro Suzuki
The Rock64 boards has analog audio jack on it. RK3328 can output analog audio signal using I2S1 and ACODEC core. This patch adds sound node for analog audio for Rock64. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-07arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsiHeiko Stuebner
The rk3328 i2s and spdif controllers only ever have one output connection, so as with all implementations of the rk3066 i2s controllers we can keep the #sound-dai-cells in the main dtsi instead of having it repeated in each board. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-07arm64: dts: rockchip: add rk3328 ACODEC nodeKatsuhiro Suzuki
This patch adds audio codec (ACODEC) node that converts to analog audio signal from I2S for rk3328. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-09-21 01:02:05 +0000