summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-22net: phy: Fixup GPLv2+ SPDX tags based on license textAndrew Lunn
A few PHY drivers have the GPLv2+ license text. They then either have a MODULE_LICENSE() of GPLv2 only, or an SPDX tag of GPLv2 only. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup the others when there are contradictions. Cc: David Wu <david.wu@rock-chips.com> Cc: Dongpo Li <lidongpo@hisilicon.com> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: fec: get regulator optionalStefan Agner
According to the device tree binding the phy-supply property is optional. Use the regulator_get_optional API accordingly. The code already handles NULL just fine. This gets rid of the following warning: fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net/ipv6: lower the level of "link is not ready" messagesLubomir Rintel
This message gets logged far too often for how interesting is it. Most distributions nowadays configure NetworkManager to use randomly generated MAC addresses for Wi-Fi network scans. The interfaces end up being periodically brought down for the address change. When they're subsequently brought back up, the message is logged, eventually flooding the log. Perhaps the message is not all that helpful: it seems to be more interesting to hear when the addrconf actually start, not when it does not. Let's lower its level. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-By: Thomas Haller <thaller@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a race condition that sysfs could be accessed before necessary initialization in int340x thermal driver. (Aaron Hill) - Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan Carpenter) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: int340x_thermal: Fix sysfs race condition thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
2019-01-22scsi: ufs: Use explicit access size in ufshcd_dump_regsMarc Gonzalez
memcpy_fromio() doesn't provide any control over access size. For example, on arm64, it is implemented using readb and readq. This may trigger a synchronous external abort: [ 3.729943] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 3.737000] Modules linked in: [ 3.744371] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S 4.20.0-rc4 #16 [ 3.747413] Hardware name: Qualcomm Technologies, Inc. MSM8998 v1 MTP (DT) [ 3.755295] pstate: 00000005 (nzcv daif -PAN -UAO) [ 3.761978] pc : __memcpy_fromio+0x68/0x80 [ 3.766718] lr : ufshcd_dump_regs+0x50/0xb0 [ 3.770767] sp : ffff00000807ba00 [ 3.774830] x29: ffff00000807ba00 x28: 00000000fffffffb [ 3.778344] x27: ffff0000089db068 x26: ffff8000f6e58000 [ 3.783728] x25: 000000000000000e x24: 0000000000000800 [ 3.789023] x23: ffff8000f6e587c8 x22: 0000000000000800 [ 3.794319] x21: ffff000008908368 x20: ffff8000f6e1ab80 [ 3.799615] x19: 000000000000006c x18: ffffffffffffffff [ 3.804910] x17: 0000000000000000 x16: 0000000000000000 [ 3.810206] x15: ffff000009199648 x14: ffff000089244187 [ 3.815502] x13: ffff000009244195 x12: ffff0000091ab000 [ 3.820797] x11: 0000000005f5e0ff x10: ffff0000091998a0 [ 3.826093] x9 : 0000000000000000 x8 : ffff8000f6e1ac00 [ 3.831389] x7 : 0000000000000000 x6 : 0000000000000068 [ 3.836676] x5 : ffff8000f6e1abe8 x4 : 0000000000000000 [ 3.841971] x3 : ffff00000928c868 x2 : ffff8000f6e1abec [ 3.847267] x1 : ffff00000928c868 x0 : ffff8000f6e1abe8 [ 3.852567] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 3.857900] Call trace: [ 3.864473] __memcpy_fromio+0x68/0x80 [ 3.866683] ufs_qcom_dump_dbg_regs+0x1c0/0x370 [ 3.870522] ufshcd_print_host_regs+0x168/0x190 [ 3.874946] ufshcd_init+0xd4c/0xde0 [ 3.879459] ufshcd_pltfrm_init+0x3c8/0x550 [ 3.883264] ufs_qcom_probe+0x24/0x60 [ 3.887188] platform_drv_probe+0x50/0xa0 Assuming aligned 32-bit registers, let's use readl, after making sure that 'offset' and 'len' are indeed multiples of 4. Fixes: ba80917d9932d ("scsi: ufs: ufshcd_dump_regs to use memcpy_fromio") Cc: <stable@vger.kernel.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Evan Green <evgreen@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: tcmu: fix use after freeXiubo Li
Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22net: altera_tse: fix connect_local_phy error pathAtsushi Nemoto
The connect_local_phy should return NULL (not negative errno) on error, since its caller expects it. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()Varun Prakash
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to avoid a NULL pointer dereference in csio_vport_set_state(). ln->fc_vport is dereferenced in csio_vport_set_state(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetportEwan D. Milne
We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: lpfc: nvme: avoid hang / use-after-free when destroying localportEwan D. Milne
We cannot wait on a completion object in the lpfc_nvme_lport structure in the _destroy_localport() code path because the NVMe/fc transport will free that structure immediately after the .localport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: communicate max segment size to the DMA mapping codeChristoph Hellwig
When a host driver sets a maximum segment size we should not only propagate that setting to the block layer, which can merge segments, but also to the DMA mapping layer which can merge segments as well. Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22net: dpaa2: improve PTP Kconfig optionYangbo Lu
Converted to use "imply" instead of "select" for PTP_1588_CLOCK driver selecting. This could break the hard dependency between the PTP clock subsystem and ethernet drivers. This patch also set "default y" for dpaa2 ptp driver building to provide user an available ptp clock in default. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22Merge branch 'qed-Error-recovery-process'David S. Miller
Michal Kalderon says: ==================== qed*: Error recovery process Parity errors might happen in the device's memories due to momentary bit flips which are caused by radiation. Errors that are not correctable initiate a process kill event, which blocks the device access towards the host and the network, and a recovery process is started in the management FW and in the driver. This series adds the support of this process in the qed core module and in the qede driver (patches 2 & 3). Patch 1 in the series revises the load sequence, to avoid PCI errors that might be observed during a recovery process. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22qede: Error recovery processTomer Tayar
This patch adds the error recovery process in the qede driver. The process includes a partial/customized driver unload and load, which allows it to look like a short suspend period to the kernel while preserving the net devices' state. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22qed: Add infrastructure for error detection and recoveryTomer Tayar
This patch adds the detection and handling of a parity error ("process kill event"), including the update of the protocol drivers, and the prevention of any HW access that will lead to device access towards the host while recovery is in progress. It also provides the means for the protocol drivers to trigger a recovery process on their decision. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22qed: Revise load sequence to avoid PCI errorsTomer Tayar
Initiating final cleanup after an ungraceful driver unload can lead to bad PCI accesses towards the host. This patch revises the load sequence so final cleanup is sent while the internal master enable is cleared, to prevent the host accesses, and clears the internal error indications just before enabling the internal master enable. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net/ipv6: don't return positive numbers when nothing was dumpedJakub Kicinski
in6_dump_addrs() returns a positive 1 if there was nothing to dump. This return value can not be passed as return from inet6_dump_addr() as is, because it will confuse rtnetlink, resulting in NLMSG_DONE never getting set: $ ip addr list dev lo EOF on netlink Dump terminated v2: flip condition to avoid a new goto (DaveA) Fixes: 7c1e8a3817c5 ("netlink: fixup regression in RTM_GETADDR") Reported-by: Brendan Galloway <brendan.galloway@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "This is a sort of random collection of clk fixes that have come in since the merge window: - Handful of memory allocation and potentially bad pointer usage fixes - JSON format was incorrect for clk_dump because it missed a comma - Two Kconfig fixes, one duplicate and one missing select line - Compiler warning fix for the VC5 clk driver - Name and rate fixes for PLLs in the stratix10 driver so it can properly detect PLL rates and parents" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix naming convention for the fixed-clocks clk: socfpga: stratix10: fix rate calculation for pll clocks clk: qcom: Select QCOM_GDSC with MSM_GCC_8998 clk: vc5: Abort clock configuration without upstream clock clk: sysfs: fix invalid JSON in clk_dump clk: imx: Remove Kconfig duplicate include clk: zynqmp: Fix memory allocation in zynqmp_clk_setup clk: tegra: dfll: Fix a potential Oop in remove() clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()
2019-01-23Merge tag 'linux-kselftest-5.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes to rtc, seccomp and other tests" * tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Abort without user notification support selftests: gpio-mockup-chardev: Check asprintf() for error selftests: seccomp: use LDLIBS instead of LDFLAGS selftests/vm/gup_benchmark.c: match gup struct to kernel tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded" selftests: rtc: rtctest: add alarm test on minute boundary selftests: rtc: rtctest: fix alarm tests
2019-01-22Merge branch 'omap-for-v4.21/dt' into omap-for-v5.1/dtTony Lindgren
2019-01-22writeback: synchronize sync(2) against cgroup writeback membership switchesTejun Heo
sync_inodes_sb() can race against cgwb (cgroup writeback) membership switches and fail to writeback some inodes. For example, if an inode switches to another wb while sync_inodes_sb() is in progress, the new wb might not be visible to bdi_split_work_to_wbs() at all or the inode might jump from a wb which hasn't issued writebacks yet to one which already has. This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb switch path against sync_inodes_sb() so that sync_inodes_sb() is guaranteed to see all the target wbs and inodes can't jump wbs to escape syncing. v2: Fixed misplaced rwsem init. Spotted by Jiufei. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jiufei Xue <xuejiufei@gmail.com> Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22ARM: dts: ipq4019: Remove skeleton.dtsiRobert Marko
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22ARM: dts: qcom: msm8974-hammerhead: add USB OTG supportBrian Masney
Add the device tree bindings for USB OTG support. Driver was tested using on a LG Nexus 5 (hammerhead) phone. This patch is based on work from Jonathan Marek and from the other msm8974 devices. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22ARM: dts: qcom: msm8974: add gpio-rangesBrian Masney
This adds the gpio-ranges property to pm8941_gpios so that the GPIO pins are initialized by the GPIO framework and not pinctrl. This fixes a circular dependency so GPIO hogging can be used on this board. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22ARM: dts: qcom: msm8974-hammerhead: add WiFi supportJonathan Marek
This patch adds WiFi support to the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <jonathan@marek.ca> [masneyb@onstation.org: Enabled wlan_regulator_pin and wlan_sleep_clk_pin] Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22ARM: dts: msm8660: Fix up GIC IRQ flagsLinus Walleij
All the GSBI blocks are marking their GIC IRQ lines as "IRQ_TYPE_NONE" but there is no such thing: all GIC IRQ lines have a trigger type. That yields the following warning from the GIC driver: WARNING: CPU: 0 PID: 1 at ../drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0xdc/0xe4 (...) Mark all of these IRQ_TYPE_LEVEL_HIGH as is common so this warning goes away. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22ARM: dts: msm8660: Mark two GSBI blocks "disabled"Linus Walleij
The GSBI module complains: gsbi 16500000.gsbi: missing mode configuration gsbi: probe of 16500000.gsbi failed with error -22 gsbi 16600000.gsbi: missing mode configuration gsbi: probe of 16600000.gsbi failed with error -22 gsbi 19800000.gsbi: GSBI port protocol: 2 crci: 0 So we should mark these GSBIs as "disabled" in the SoC file by default. If boards appear that make use of them, we can simply set status = "ok" in the DTS for them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-22net: ip_gre: use erspan key field for tunnel lookupLorenzo Bianconi
Use ERSPAN key header field as tunnel key in gre_parse_header routine since ERSPAN protocol sets the key field of the external GRE header to 0 resulting in a tunnel lookup fail in ip6gre_err. In addition remove key field parsing and pskb_may_pull check in erspan_rcv and ip6erspan_rcv Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: sun: cassini: Cleanup license conflictThomas Gleixner
The recent addition of SPDX license identifiers to the files in drivers/net/ethernet/sun created a licensing conflict. The cassini driver files contain a proper license notice: * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. but the SPDX change added: SPDX-License-Identifier: GPL-2.0 So the file got tagged GPL v2 only while in fact it is licensed under GPL v2 or later. It's nice that people care about the SPDX tags, but they need to be more careful about it. Not everything under (the) sun belongs to ... Fix up the SPDX identifier and remove the boiler plate text as it is redundant. Fixes: c861ef83d771 ("sun: Add SPDX license tags to Sun network drivers") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Shannon Nelson <shannon.nelson@oracle.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22dm: add missing trace_block_split() to __split_and_process_bio()Mike Snitzer
Provides useful context about bio splits in blktrace. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-22dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriateMike Snitzer
Otherwise targets that don't support/expect IO splitting could resubmit bios using code paths with unnecessary IO splitting complexity. Depends-on: 24113d487843 ("dm: avoid indirect call in __dm_make_request") Fixes: 978e51ba38e00 ("dm: optimize bio-based NVMe IO submission") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - descriptor parsing regression fix for devices that have more than 16 collections, from Peter Hutterer (and followup cleanup from Philipp Zabel) - quirk for Goodix touchpad * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: simplify active collection tracking HID: i2c-hid: Disable runtime PM on Goodix touchpad HID: core: replace the collection tree pointers with indices
2019-01-22vfio/pci: Cleanup license messThomas Gleixner
The recently added nvlink2 VFIO driver introduced a license conflict in two files. In both cases the SPDX license identifier is: SPDX-License-Identifier: GPL-2.0+ but the files contain also the following license boiler plate text: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation The latter is GPL-2.9-only and not GPL-2.0=. Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which is also licensed under GPL-2.0-only and it can be assumed that the file was copied and modified. As the original file is licensed GPL-2.0-only it's not possible to relicense derivative work to GPL-2.0-or-later. Fix the SPDX identifier and remove the boiler plate as it is redundant. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: kvm@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-01-22block: cover another queue enter recursion via BIO_QUEUE_ENTEREDMing Lei
Except for blk_queue_split(), bio_split() is used for splitting bio too, then the remained bio is often resubmit to queue via generic_make_request(). So the same queue enter recursion exits in this case too. Unfortunatley commit cd4a4ae4683dc2 doesn't help this case. This patch covers the above case by setting BIO_QUEUE_ENTERED before calling q->make_request_fn. In theory the per-bio flag is used to simulate one stack variable, it is just fine to clear it after q->make_request_fn is returned. Especially the same bio can't be submitted from another context. Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits") Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: NeilBrown <neilb@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabledSinan Kaya
After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. PCI_LOCKLESS_CONFIG depends on PCI but this dependency has not been mentioned in the Kconfig so add an explicit dependency here and fix WARNING: unmet direct dependencies detected for PCI_LOCKLESS_CONFIG Depends on [n]: PCI [=n] Selected by [y]: - X86 [=y] Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190121231958.28255-2-okaya@kernel.org
2019-01-22direct-io: allow direct writes to empty inodesErnesto A. Fernández
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently not allowed to create blocks for an empty inode. This confusion comes from trying to bit shift a negative number, so check the size of the inode first. The problem is most visible for hfsplus, because the fallback to buffered I/O doesn't happen and the write fails with EIO. This is in part the fault of the module, because it gives a wrong return value on ->get_block(); that will be fixed in a separate patch. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-22arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodesFabrizio Castro
Add device nodes for VIN4, VIN5 and CSI40 to RZ/G2E (a.k.a. R8A774C0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add PCIe device nodeFabrizio Castro
This patch adds PCI express channel 0 device tree node to the RZ/G2E (a.k.a. R8A774C0) SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMUFabrizio Castro
Hook up the RZ/G2E Audio-DMAC device to IPMMU-MP as stated by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMUFabrizio Castro
Hook up the RZ/G2E AVB device to IPMMU-DS0 as stated by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMUFabrizio Castro
Hook up SYS-DMAC0, SYS-DMAC1, and SYS-DMAC2 to IPMMU-DS0 and IPMMU-DS1, according to what reported by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB3.0 device nodesFabrizio Castro
Add usb3.0 host and function device nodes to the RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodesFabrizio Castro
Add usb dmac and hsusb device nodes on RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodesFabrizio Castro
Add USB2.0 phy and host (EHCI/OHCI) device tree nodes to the RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add display output supportFabrizio Castro
The RZ/G2E (a.k.a. R8A774C0) has one RGB output and two LVDS outputs connected to DU. This patch add support for DU, LVDS encoders, VSP and FCP. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add PWM supportFabrizio Castro
Add PWM support to the RZ/G2E (a.k.a. R8A774C0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add audio supportFabrizio Castro
Add sound support for the RZ/G2E SoC (a.k.a. R8A774C0). This work is based on similar work done on the R8A77990 SoC by Yoshihiro Kaneko <ykaneko0929@gmail.com>. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add MSIOF nodesFabrizio Castro
Add the device nodes for all MSIOF SPI controllers on RZ/G2E SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add thermal supportFabrizio Castro
This patch adds the thermal device node and the thermal-zones node to the SoC specific dtsi for the RZ/G2E. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add CAN nodesFabrizio Castro
Add the device nodes for both RZ/G2E CAN channels. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-13 11:19:36 +0000