summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-22arm64: dts: renesas: r8a774c0: Add IPMMU device nodesFabrizio Castro
Add r8a774c0 IPMMU nodes. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS supportFabrizio Castro
Add the I2C[0-7] and IIC Bus Interface for DVFS (IIC for DVFS) devices nodes to the r8a774c0 device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add SDHI nodesFabrizio Castro
Add SDHI nodes to the DT of the r8a774c0 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU coreFabrizio Castro
Add a device node for the second Cortex-A53 CPU core on the Renesas RZ/G2E (a.k.a r8a774c0) SoC, and adjust the interrupt delivery masks for the ARM Generic Interrupt Controller and Architectured Timer. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add watchdog supportFabrizio Castro
Add watchdog support to the RZ/G2E (a.k.a. R8A774C0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add Ethernet AVB nodeFabrizio Castro
This patch adds the SoC specific part of the Ethernet AVB device tree node. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add GPIO device nodesFabrizio Castro
Add GPIO device nodes to the DT of the r8a774c0 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add PFC supportFabrizio Castro
Add PFC support to the RZ/G2E (a.k.a. r8a774c0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add INTC-EX device nodeFabrizio Castro
Add support for the Interrupt Controller for External Devices (INTC-EX) on RZ/G2E. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodesFabrizio Castro
Add the device nodes for all RZ/G2E SCIF and HSCIF serial ports, including clocks, power domains and DMAs. According to the HW user manual, SCIF[015] and HSCIF[012] are connected to both SYS-DMAC1 and SYS-DMAC2, while SCIF[34] and HSCIF[34] are connected to SYS-DMAC0. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodesFabrizio Castro
Add sys-dmac[012] device nodes for the RZ/G2E SoC (a.k.a. r8a774c0). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: Initial device tree for r8a774c0Fabrizio Castro
Basic support for the RZ/G2E SoC (a.k.a. r8a774c0). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a77990: ebisu: Fix EthernetAVB phy mode to rgmiiKazuya Mizuguchi
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of August 24, 2018, the TX clock internal delay mode doesn't support on R-Car E3. This patch fixes EthernetAVB phy mode to rgmii. This is achieved by simply dropping the phy-mode property from r8a77990-ebisu.dts as the default property for this for r8a77990, as set in r8a77990.dtsi, is "rgmii". Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
2019-01-22ARM: dts: vexpress: use list instead of tuple for mmci interruptsSudeep Holla
Vexpress motherboard MMCI requires dedicated interrupts for CMD and PIO, which obviously should be expressed as a list. Current form uses tuple and it works fine since interrupt-cells equal to 1. Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-01-22i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'Christophe JAILLET
Fix a cut'n'paste typo. Checking 'master->sysclk' is expected here. Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22ARM: dts: mps2: use list instead of tuple for uart interruptsVladimir Murzin
MPS2 UART requires dedicated interrupts for RX, TX and overflow, which obviously should be expressed as a list. Current form uses tuple and it has worked so far because NVIC has interrupt-cells equal to 1. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-01-22binderfs: switch from d_add() to d_instantiate()Christian Brauner
In a previous commit we switched from a d_alloc_name() + d_lookup() combination to setup a new dentry and find potential duplicates to the more idiomatic lookup_one_len(). As far as I understand, this also means we need to switch from d_add() to d_instantiate() since lookup_one_len() will create a new dentry when it doesn't find an existing one and add the new dentry to the hash queues. So we only need to call d_instantiate() to connect the dentry to the inode and turn it into a positive dentry. If we were to use d_add() we sure see stack traces like the following indicating that adding the same dentry twice over the same inode: [ 744.441889] CPU: 4 PID: 2849 Comm: landscape-sysin Not tainted 5.0.0-rc1-brauner-binderfs #243 [ 744.441889] Hardware name: Dell DCS XS24-SC2 /XS24-SC2 , BIOS S59_3C20 04/07/2011 [ 744.441889] RIP: 0010:__d_lookup_rcu+0x76/0x190 [ 744.441889] Code: 89 75 c0 49 c1 e9 20 49 89 fd 45 89 ce 41 83 e6 07 42 8d 04 f5 00 00 00 00 89 45 c8 eb 0c 48 8b 1b 48 85 db 0f 84 81 00 00 00 <44> 8b 63 fc 4c 3b 6b 10 75 ea 48 83 7b 08 00 74 e3 41 83 e4 fe 41 [ 744.441889] RSP: 0018:ffffb8c984e27ad0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 744.441889] RAX: 0000000000000038 RBX: ffff9407ef770c08 RCX: ffffb8c980011000 [ 744.441889] RDX: ffffb8c984e27b54 RSI: ffffb8c984e27ce0 RDI: ffff9407e6689600 [ 744.441889] RBP: ffffb8c984e27b28 R08: ffffb8c984e27ba4 R09: 0000000000000007 [ 744.441889] R10: ffff9407e5c4f05c R11: 973f3eb9d84a94e5 R12: 0000000000000002 [ 744.441889] R13: ffff9407e6689600 R14: 0000000000000007 R15: 00000007bfef7a13 [ 744.441889] FS: 00007f0db13bb740(0000) GS:ffff9407f3b00000(0000) knlGS:0000000000000000 [ 744.441889] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 744.441889] CR2: 00007f0dacc51024 CR3: 000000032961a000 CR4: 00000000000006e0 [ 744.441889] Call Trace: [ 744.441889] lookup_fast+0x53/0x300 [ 744.441889] walk_component+0x49/0x350 [ 744.441889] ? inode_permission+0x63/0x1a0 [ 744.441889] link_path_walk.part.33+0x1bc/0x5a0 [ 744.441889] ? path_init+0x190/0x310 [ 744.441889] path_lookupat+0x95/0x210 [ 744.441889] filename_lookup+0xb6/0x190 [ 744.441889] ? __check_object_size+0xb8/0x1b0 [ 744.441889] ? strncpy_from_user+0x50/0x1a0 [ 744.441889] user_path_at_empty+0x36/0x40 [ 744.441889] ? user_path_at_empty+0x36/0x40 [ 744.441889] vfs_statx+0x76/0xe0 [ 744.441889] __do_sys_newstat+0x3d/0x70 [ 744.441889] __x64_sys_newstat+0x16/0x20 [ 744.441889] do_syscall_64+0x5a/0x120 [ 744.441889] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 744.441889] RIP: 0033:0x7f0db0ec2775 [ 744.441889] Code: 00 00 00 75 05 48 83 c4 18 c3 e8 26 55 02 00 66 0f 1f 44 00 00 83 ff 01 48 89 f0 77 30 48 89 c7 48 89 d6 b8 04 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 03 f3 c3 90 48 8b 15 e1 b6 2d 00 f7 d8 64 89 [ 744.441889] RSP: 002b:00007ffc36bc9388 EFLAGS: 00000246 ORIG_RAX: 0000000000000004 [ 744.441889] RAX: ffffffffffffffda RBX: 00007ffc36bc9300 RCX: 00007f0db0ec2775 [ 744.441889] RDX: 00007ffc36bc9400 RSI: 00007ffc36bc9400 RDI: 00007f0dad26f050 [ 744.441889] RBP: 0000000000c0bc60 R08: 0000000000000000 R09: 0000000000000001 [ 744.441889] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc36bc9400 [ 744.441889] R13: 0000000000000001 R14: 00000000ffffff9c R15: 0000000000c0bc60 Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: drop lock in binderfs_binder_ctl_createChristian Brauner
The binderfs_binder_ctl_create() call is a no-op on subsequent calls and the first call is done before we unlock the suberblock. Hence, there is no need to take inode_lock() in there. Let's remove it. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: kill_litter_super() before cleanupChristian Brauner
Al pointed out that first calling kill_litter_super() before cleaning up info is more correct since destroying info doesn't depend on the state of the dentries and inodes. That the opposite remains true is not guaranteed. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: rework binderfs_binder_device_create()Christian Brauner
- switch from d_alloc_name() + d_lookup() to lookup_one_len(): Instead of using d_alloc_name() and then doing a d_lookup() with the allocated dentry to find whether a device with the name we're trying to create already exists switch to using lookup_one_len(). The latter will either return the existing dentry or a new one. - switch from kmalloc() + strscpy() to kmemdup(): Use a more idiomatic way to copy the name for the new dentry that userspace gave us. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: rework binderfs_fill_super()Christian Brauner
Al pointed out that on binderfs_fill_super() error deactivate_locked_super() will call binderfs_kill_super() so all of the freeing and putting we currently do in binderfs_fill_super() is unnecessary and buggy. Let's simply return errors and let binderfs_fill_super() take care of cleaning up on error. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: prevent renaming the control dentryChristian Brauner
- make binderfs control dentry immutable: We don't allow to unlink it since it is crucial for binderfs to be useable but if we allow to rename it we make the unlink trivial to bypass. So prevent renaming too and simply treat the control dentry as immutable. - add is_binderfs_control_device() helper: Take the opportunity and turn the check for the control dentry into a separate helper is_binderfs_control_device() since it's now used in two places. - simplify binderfs_rename(): Instead of hand-rolling our custom version of simple_rename() just dumb the whole function down to first check whether we're trying to rename the control dentry. If we do EPERM the caller and if not call simple_rename(). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: remove outdated commentChristian Brauner
The comment stems from an early version of that patchset and is just confusing now. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: use __u32 for device numbersChristian Brauner
We allow more then 255 binderfs binder devices to be created since there are workloads that require more than that. If we use __u8 we'll overflow after 255. So let's use a __u32. Note that there's no released kernel with binderfs out there so this is not a regression. Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22binderfs: use correct include guards in headerChristian Brauner
When we switched over from binder_ctl.h to binderfs.h we forgot to change the include guards. It's minor but it's obviously correct. Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22staging: android: ion: Support cpu access during dma_buf_detachLiam Mark
Often userspace doesn't know when the kernel will be calling dma_buf_detach on the buffer. If userpace starts its CPU access at the same time as the sg list is being freed it could end up accessing the sg list after it has been freed. Thread A Thread B - DMA_BUF_IOCTL_SYNC IOCT - ion_dma_buf_begin_cpu_access - list_for_each_entry - ion_dma_buf_detatch - free_duped_table - dma_sync_sg_for_cpu Fix this by getting the ion_buffer lock before freeing the sg table memory. Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping") Signed-off-by: Liam Mark <lmark@codeaurora.org> Acked-by: Laura Abbott <labbott@redhat.com> Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22can: flexcan: fix NULL pointer exception during bringupUwe Kleine-König
Commit cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb) and in the body accessed regs->mb[i] which is an out-of-bounds array access that then resulted in an access to an reserved register area. Later this was changed by commit 0517961ccdf1 ("can: flexcan: Add provision for variable payload size") to iterate a bit differently but still runs one iteration too much resulting to call flexcan_get_mb(priv, priv->mb_count) which results in a WARN_ON and then a NULL pointer exception. This only affects devices compatible with "fsl,p1010-flexcan", "fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan", "fsl,imx28-flexcan", so newer i.MX SoCs are not affected. Fixes: cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> # >= 4.20 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: flexcan: fix 'passing zero to ERR_PTR()' warningYueHaibing
Fix a static code checker warning: drivers/net/can/flexcan.c:1435 flexcan_setup_stop_mode() warn: passing zero to 'PTR_ERR' Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: bcm: check timer values before ktime conversionOliver Hartkopp
Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by: Kyungtae Kim <kt0755@gmail.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26 Tested-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Andre Naujoks <nautsch2@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22can: dev: __can_get_echo_skb(): fix bogous check for non-existing skb by ↵Manfred Schlaegl
removing it This patch revert commit 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-01-22drm/sun4i: hdmi: Fix usage of TMDS clockPriit Laes
Although TMDS clock is required for HDMI to properly function, nobody called clk_prepare_enable(). This fixes reference counting issues and makes sure clock is running when it needs to be running. Due to TDMS clock being parent clock for DDC clock, TDMS clock was turned on/off for each EDID probe, causing spurious failures for certain HDMI/DVI screens. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Priit Laes <priit.laes@paf.com> [Maxime: Moved the TMDS clock enable earlier] Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org
2019-01-22serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabledMatthias Kaehlcke
The geni set/get_mctrl() functions currently do nothing unless hardware flow control is enabled. Remove this arbitrary limitation. Suggested-by: Johan Hovold <johan@kernel.org> Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22mmc: dw_mmc-bluefield: : Fix the license informationLiming Sun
The SPDX license identifier and the boiler plate text are contradicting. Only the SPDX license identifier is needed. The other one is removed. Fixes: 86958dcc5ad7 ("mmc: dw_mmc-bluefield: Add driver extension") Cc: stable@vger.kernel.org Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-22mmc: meson-gx: enable signal re-sampling together with tuningAndreas Fenkart
card detection fails on "BeeLink Mini M8 SII" if enabled too early mmc1: error -110 whilst initialising MMC card Fixes: 71645e65729f ("mmc: meson-gx: add signal resampling") Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-01-22arm64: dts: imx8qxp: Fix MU4_INT numberDaniel Baluta
MU4_INT correct number is 180, while 179 is for MU3_INT. Fixes: 3d91ba65fecd ("arm64: dts: imx: add imx8qxp support") Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-22dt-bindings: Add vendor prefix for Catalyst SemiconductorMartyn Welch
Add vendor prefix "catalyst" for Catalyst Semiconductor which is already in use but undocumented. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-22Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds
Pull XArray fixes from Matthew Wilcox: "Fix some oversights in the XArray porcelain API: - support for m68k's two-byte aligned pointers - reserving entries using xa_insert() - missing xa_insert_bh() and xa_insert_irq() functions - simplify using xa_for_each() - use lockdep correctly - a few other minor fixes and improvements" * tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix an arithmetic error in xa_is_err XArray tests: Check mark 2 gets squashed XArray: Fix typo in comment XArray: Honour reserved entries in xa_insert XArray: Permit storing 2-byte-aligned pointers XArray: Change xa_for_each iterator XArray: Turn xa_init_flags into a static inline XArray tests: Add RCU locking
2019-01-22ide: fix a typo in the settings proc file nameChristoph Hellwig
Fixes: ec7d9c9ce8 ("ide: replace ->proc_fops with ->proc_show") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-21drm/amd/powerplay: OD setting fix on Vega10Kenneth Feng
gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-22Merge tag 'iommu-fixes-v5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "One fix only for now: Fix probe deferral in iommu/of code (broke with recent changes to iommu_ops->add_device invocation)" * tag 'iommu-fixes-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/of: Fix probe-deferral
2019-01-22Merge tag 'arc-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC architecture updates from Vineet Gupta: - Perf support for raw events - boot log printing: return stack, action points - fix memset to avoid prefetchw bleeding past end of buffer - do_page_fault fix for mmap_sem held while returning to userspace - other misc fixes * tag 'arc-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: lib: memeset: fix doing prefetchw outside of buffer ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault ARC: show_regs: lockdep: re-enable preemption ARC: show_regs: lockdep: avoid page allocator... ARC: perf: avoid kernel killing where it is possible ARC: perf: move HW events mapping to separate function ARC: perf: introduce Kernel PMU events support ARC: perf: trivial code cleanup ARC: perf: map generic branches to correct hardware condition ARC: adjust memblock_reserve of kernel memory arc: remove redundant kernel-space generic-y ARC: fix __ffs return value to avoid build warnings ARC: boot log: print Action point details ARCv2: boot log: BPU return stack depth
2019-01-21acpi/nfit: Fix command-supported detectionDan Williams
The _DSM function number validation only happens to succeed when the generic Linux command number translation corresponds with a DSM-family-specific function number. This breaks NVDIMM-N implementations that correctly implement _LSR, _LSW, and _LSI, but do not happen to publish support for DSM function numbers 4, 5, and 6. Recall that the support for _LS{I,R,W} family of methods results in the DIMM being marked as supporting those command numbers at acpi_nfit_register_dimms() time. The DSM function mask is only used for ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices. Fixes: 31eca76ba2fc ("nfit, libnvdimm: limited/whitelisted dimm command...") Cc: <stable@vger.kernel.org> Link: https://github.com/pmem/ndctl/issues/78 Reported-by: Sujith Pandel <sujith_pandel@dell.com> Tested-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21acpi/nfit: Block function zero DSMsDan Williams
In preparation for using function number 0 as an error value, prevent it from being considered a valid function value by acpi_nfit_ctl(). Cc: <stable@vger.kernel.org> Cc: stuart hayes <stuart.w.hayes@gmail.com> Fixes: e02fb7264d8a ("nfit: add Microsoft NVDIMM DSM command set...") Reported-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21libnvdimm/security: Require nvdimm_security_setup_events() to succeedDan Williams
The following warning: ACPI0012:00: security event setup failed: -19 ...is meant to capture exceptional failures of sysfs_get_dirent(), however it will also fail in the common case when security support is disabled. A few issues: 1/ A dev_warn() report for a common case is too chatty 2/ The setup of this notifier is generic, no need for it to be driven from the nfit driver, it can exist completely in the core. 3/ If it fails for any reason besides security support being disabled, that's fatal and should abort DIMM activation. Userspace may hang if it never gets overwrite notifications. 4/ The dirent needs to be released. Move the call to the core 'dimm' driver, make it conditional on security support being active, make it fatal for the exceptional case, add the missing sysfs_put() at device disable time. Fixes: 7d988097c546 ("...Add security DSM overwrite support") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21nfit_test: fix security state pull for nvdimm security nfit_testDave Jiang
The override status function needs to be updated to use the proper request parameter in order to get the security state. Fixes: 3c13e2ac747a ("...Add test support for Intel nvdimm security DSMs") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21tty: Handle problem if line discipline does not have receive_bufGreg Kroah-Hartman
Some tty line disciplines do not have a receive buf callback, so properly check for that before calling it. If they do not have this callback, just eat the character quietly, as we can't fail this call. Reported-by: Jann Horn <jannh@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21dm: fix redundant IO accounting for bios that need splittingMike Snitzer
The risk of redundant IO accounting was not taken into consideration when commit 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") introduced IO splitting in terms of recursion via generic_make_request(). Fix this by subtracting the split bio's payload from the IO stats that were already accounted for by start_io_acct() upon dm_make_request() entry. This repeat oscillation of the IO accounting, up then down, isn't ideal but refactoring DM core's IO splitting to pre-split bios _before_ they are accounted turned out to be an excessive amount of change that will need a full development cycle to refine and verify. Before this fix: /dev/mapper/stripe_dev is a 4-way stripe using a 32k chunksize, so bios are split on 32k boundaries. # fio --name=16M --filename=/dev/mapper/stripe_dev --rw=write --bs=64k --size=16M \ --iodepth=1 --ioengine=libaio --direct=1 --refill_buffers with debugging added: [103898.310264] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=0 len=128 [103898.318704] device-mapper: core: __split_and_process_bio: recursing for following split bio: [103898.329136] device-mapper: core: start_io_acct: dm-2 WRITE bio->bi_iter.bi_sector=64 len=64 ... 16M written yet 136M (278528 * 512b) accounted: # cat /sys/block/dm-2/stat | awk '{ print $7 }' 278528 After this fix: 16M written and 16M (32768 * 512b) accounted: # cat /sys/block/dm-2/stat | awk '{ print $7 }' 32768 Fixes: 18a25da84354 ("dm: ensure bio submission follows a depth-first tree walk") Cc: stable@vger.kernel.org # 4.16+ Reported-by: Bryan Gurney <bgurney@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-21dm: fix clone_bio() to trigger blk_recount_segments()Mike Snitzer
DM's clone_bio() now benefits from using bio_trim() by fixing the fact that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does; which triggers blk_recount_segments() via bio_phys_segments(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-01-21ALSA: hda - Add mute LED support for HP ProBook 470 G5Anthony Wong
Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254 Signed-off-by: Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-13 23:26:12 +0000