| Age | Commit message (Collapse) | Author |
|---|
|
To save per-packet calculations, we use the following static mappings:
1) priv {channel, tc} to netdev txq (used @mlx5e_selec_queue())
2) netdev txq to priv sq (used @mlx5e_xmit())
Thanks to these static mappings, no more need for a separate implementation
of ndo_start_xmit when multiple TCs are configured.
We believe the performance improvement of such separation would be negligible, if any.
The previous way of dynamically calculating the above mappings required
allocating more TX queues than actually used (@alloc_etherdev_mqs()),
which is now no longer needed.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under SRIOV, the port rx/tx bytes/packets statistics should by read
from the HW instead of using the PF netdevice SW accounting. This is
needed in order to get the full port statistics and not just the PF
own ones
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NUM_ALL_STATS was not updated with the new four entries, instead
NUM_FLOW_STATS was updated, fix it. that caused off-by-four for all
counters below pf_*_*.
Fixes: b42de4d01264 ('net/mlx4_en: Show PF own statistics via ethtool')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move resource allocation from common code to legacy and modern code.
Only request resources actually used, i.e. bar0 in legacy mode and
the bar(s) specified by capabilities in modern mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time with bigger changes than usual:
- A new IOMMU driver for the ARM SMMUv3.
This IOMMU is pretty different from SMMUv1 and v2 in that it is
configured through in-memory structures and not through the MMIO
register region. The ARM SMMUv3 also supports IO demand paging for
PCI devices with PRI/PASID capabilities, but this is not
implemented in the driver yet.
- Lots of cleanups and device-tree support for the Exynos IOMMU
driver. This is part of the effort to bring Exynos DRM support
upstream.
- Introduction of default domains into the IOMMU core code.
The rationale behind this is to move functionalily out of the IOMMU
drivers to common code to get to a unified behavior between
different drivers. The patches here introduce a default domain for
iommu-groups (isolation groups).
A device will now always be attached to a domain, either the
default domain or another domain handled by the device driver. The
IOMMU drivers have to be modified to make use of that feature. So
long the AMD IOMMU driver is converted, with others to follow.
- Patches for the Intel VT-d drvier to fix DMAR faults that happen
when a kdump kernel boots.
When the kdump kernel boots it re-initializes the IOMMU hardware,
which destroys all mappings from the crashed kernel. As this
happens before the endpoint devices are re-initialized, any
in-flight DMA causes a DMAR fault. These faults cause PCI master
aborts, which some devices can't handle properly and go into an
undefined state, so that the device driver in the kdump kernel
fails to initialize them and the dump fails.
This is now fixed by copying over the mapping structures (only
context tables and interrupt remapping tables) from the old kernel
and keep the old mappings in place until the device driver of the
new kernel takes over. This emulates the the behavior without an
IOMMU to the best degree possible.
- A couple of other small fixes and cleanups"
* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
iommu/amd: Handle large pages correctly in free_pagetable
iommu/vt-d: Don't disable IR when it was previously enabled
iommu/vt-d: Make sure copied over IR entries are not reused
iommu/vt-d: Copy IR table from old kernel when in kdump mode
iommu/vt-d: Set IRTA in intel_setup_irq_remapping
iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
iommu/vt-d: Enable Translation only if it was previously disabled
iommu/vt-d: Don't disable translation prior to OS handover
iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
iommu/vt-d: Don't do early domain assignment if kdump kernel
iommu/vt-d: Allocate si_domain in init_dmars()
iommu/vt-d: Mark copied context entries
iommu/vt-d: Do not re-use domain-ids from the old kernel
iommu/vt-d: Copy translation tables from old kernel
iommu/vt-d: Detect pre enabled translation
iommu/vt-d: Make root entry visible for hardware right after allocation
iommu/vt-d: Init QI before root entry is allocated
iommu/vt-d: Cleanup log messages
...
|
|
Now that the interface has been proven by a port of Weston (using all
atomic features including TEST_ONLY), remove the module parameter
guarding the atomic API from being exposed, and let it run free in the
wild.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Since there's only one global instance ever we don't need to have
anything fancy. Stops a WARNING in the get_unique ioctl that the
unique name isn't set.
Cc: <stable@vger.kernel.org> # 4.1+ only
Reportedy-and-tested-by: Fabio Coatti <fabio.coatti@gmail.com>
Cc: Fabio Coatti <fabio.coatti@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This patch fixes the below build error reported by Stephen,
Stephen reported:
After merging the drm-exynos tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/media/i2c/adv7604.o: In function `of_graph_get_endpoint_by_regs':
adv7604.c:(.text+0x586c): multiple definition of `of_graph_get_endpoint_by_regs'
drivers/media/i2c/adv7343.o:adv7343.c:(.text+0xa13): first defined here
drivers/media/platform/soc_camera/atmel-isi.o: In function `of_graph_get_endpoint_by_regs':
atmel-isi.c:(.text+0x1ec9): multiple definition of `of_graph_get_endpoint_by_regs'
drivers/media/platform/soc_camera/soc_camera.o:soc_camera.c:(.text+0x2ce3): first defined here
drivers/media/platform/soc_camera/rcar_vin.o: In function `of_graph_get_endpoint_by_regs':
rcar_vin.c:(.text+0x307c): multiple definition of `of_graph_get_endpoint_by_regs'
drivers/media/platform/soc_camera/soc_camera.o:soc_camera.c:(.text+0x2ce3): first defined here
Caused by commit:
a0f7001c18ca ("of: add helper for getting endpoint node of specific identifiers")
To fix the error, this patch declares of_graph_get_endpoint_by_regs function
with "static inline".
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pull MTD updates from Brian Norris:
"JFFS2:
- fix a theoretical unbalanced locking issue; the lock handling was a
bit unclean, but AFAICT, it didn't actually lead to real deadlocks
NAND:
- brcmnand driver: new driver supporting NAND controller found
originally on Broadcom STB SoCs (BCM7xxx), but now also found on
BCM63xxx, iProc (e.g., Cygnus, BCM5301x), BCM3xxx, and more
- begin factoring out BBT code so it can be shared between
traditional (parallel) NAND drivers and upcoming SPI NAND drivers
(WIP)
- add common DT-based init support, so nand_base can pick up some
flash properties automatically, using established common NAND DT
properties
- mxc_nand: support 8-bit ECC
- pxa3xx_nand:
* fix build for ARM64
* use a jiffies-based timeout
SPI NOR:
- add a few new IDs
- clear out some unnecessary entries
- make sure SECT_4K flags are correct for all (?) entries
Core:
- fix mtd->usecount race conditions (BUG_ON())
- switch to modern PM ops
Other:
- CFI: save code space by de-inlining large functions
- clean up some partition parser selection code across several
drivers
- various miscellaneous changes, mostly minor"
* tag 'for-linus-20150623' of git://git.infradead.org/linux-mtd: (57 commits)
mtd: docg3: Fix kasprintf() usage
mtd: docg3: Don't leak docg3->bbt in error path
mtd: nandsim: Fix kasprintf() usage
mtd: cs553x_nand: Fix kasprintf() usage
mtd: r852: Fix device_create_file() usage
mtd: brcmnand: drop unnecessary initialization
mtd: propagate error codes from add_mtd_device()
mtd: diskonchip: remove two-phase partitioning / registration
mtd: dc21285: use raw spinlock functions for nw_gpio_lock
mtd: chips: fixup dependencies, to prevent build error
mtd: cfi_cmdset_0002: Initialize datum before calling map_word_load_partial
mtd: cfi: deinline large functions
mtd: lantiq-flash: use default partition parsers
mtd: plat_nand: use default partition probe
mtd: nand: correct indentation within conditional
mtd: remove incorrect file name
mtd: blktrans: use better error code for unimplemented ioctl()
mtd: maps: Spelling s/reseved/reserved/
mtd: blktrans: change blktrans_getgeo return value
mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Constify structures; throughout the subsystem
- Move support to DT in; cros_ec
- DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
- ACPI changes and documentation; mfd-core
- Use different platform specific API in; cros_ec_*, arizona-core
- Remove unused parent field from; cros_ec_i2c
- Add wake-up/reset delay in; cross_ec_spi, arizona-core
- Staticise structures/functions in; cros_ec
- Remove redundant code; arizona-core, max77686
- Bugfix; twl4030-power
- Allow compile test; aat2870, tps65910
- MAINTAINERS adaptions; samsung, syscon
- Resource Management (devm_*); arizona-core
- Refactor Reset code; arizona-core
- Insist on at least one full boot; arizona-core
- Trivial formatting; arizona-core
- Add low-power-sleep; arizona-core
- IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c
(Re-)moved drivers:
- Move protocol helpers out to drivers/platform; cros_ec
New drivers/supported devices:
- Add support for AXP22x into axp20x
- Add support for OnKey into da9063-core
- Add support for Pinctrl into mt6397-core
- New STMicroelectronics LPC Watchdog driver
- New STMicroelectronics LPC Real-Time Clock driver"
* tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits)
mfd: lpc_ich: Assign subdevice ids automatically
mfd: si476x-i2c: Pass the IRQF_ONESHOT flag
mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag
mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag
mfd: wm8350-core: Pass the IRQF_ONESHOT flag
mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag
mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag
mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag
mfd: twl4030-irq: Pass the IRQF_ONESHOT flag
mfd: mt6397-core: Add GPIO sub-module support
mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
mfd: dt: Add bindings for DA9063 OnKey
mfd: da9063: Add support for OnKey driver
mfd: arizona: Fix incorrect Makefile conditionals
mfd: arizona: Add stub for wm5102_patch()
mfd: Check ACPI device companion before checking resources
Documentation: Add WM8998/WM1814 device tree bindings
mfd: arizona: Split INx_MODE into two fields
mfd: wm5110: Add delay before releasing reset line
mfd: arizona: Add better support for system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another fairly quiet release, some new drivers with generic handling
for minor features but nothing that makes a substantial difference
outside of the subsystem or for most boards:
- support for a bunch of new parameters which are present on enough
regulators to be worth having generic handling for in the
framework.
- fixes for some issues with printing constraints during boot which
should probably have gone in for v4.1 but didn't.
- new drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI
regulators"
* tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
regulator: qcom_spmi: Fix calculating number of voltages
regulator: qcom_spmi: Add missing braces for aligned code
regulator: fix simple_return.cocci warnings
regulator: Add QCOM SPMI regulator driver
regulator: Add docbook for soft start
regulator: Add input current limit support
regulator: Add soft start support
regulator: Add pull down support
regulator: Add system_load constraint
regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case
regulator: core: replace sprintf with scnprintf
regulator: core: fix constraints output buffer
regulator: core: Don't corrupt display when printing uV offsets
regulator: max8973: add support for MAX77621
regulator: max8973: configure ramp delay through callback
regulator: pwm-regulator: Diffientiate between dev (device) and rdev (regulator_dev)
regulator: pwm-regulator: Remove superfluous is_enabled check
regulator: pwm-regulator: Remove unnecessary descriptor attribute from ddata
regulator: core: Don't spew backtraces on duplicate sysfs
regulator: da9063: Fix up irq leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"No framework updates for the SPI API this time around aside from one
small fix, just driver improvments. Some highlights include:
- New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
controllers.
- Modernisation of the OMAP McSPI controller driver, moving it to
current APIs to enable support for a wider range of client drivers.
- DMA support for the bcm2835 controller"
* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
spi: zynq: Remove execute bit
spi: atmel: add support to FIFOs
spi: atmel: update DT bindings documentation
spi: spi-fsl-dspi: Update DT binding documentation
spi: pxa2xx: Constify ACPI device ids
spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
spi: fsl-dspi: Use pinctrl PM helpers
spi: davinci: change the lower limit of pre-scale divider to 1
spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
spi: spi-fsl-dspi: Enable TCF interrupt mode support
spi: atmel: add support for the internal chip-select of the spi controller
spi: spi-pxa2xx: remove legacy PXA DMA bits
spi: pxa2xx: Make LPSS SPI general register optional
spi: pxa2xx: Prepare for new Intel LPSS SPI type
spi: pxa2xx: Differentiate Intel LPSS types
spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
spi: rspi: Re-do the returning value of qspi_transfer_out_in
spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
spi: orion: Fix extended baud rates for each Armada SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"As well as a few fixes and updates for API changes there's two new
features for the API:
- Better support for handling a reset of the underlying hardware,
marking the register map as needing a resync to the device when we
need to do that automatically
- Support for querying the size and stride of the register map,
allowing higher level frameworks to configure themselves more
readily"
* tag 'regmap-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible shift overflow in regmap_field_init()
regmap: Fix regmap_bulk_read in BE mode
regmap: kill off set_irq_flags usage
regmap: irq: Fixed a typo error
regmap: drop unneeded goto
regmap: Introduce regmap_get_reg_stride
regmap: Introduce regmap_get_max_register
regmap: Use regcache_mark_dirty() to indicate power loss or reset
regmap: Add a helper function for regcache sync test
regmap: Constify irq_domain_ops
|
|
This mirrors the change introduced by 7d0ae8086b8 of same title
in Linus' tree; it's not obvious as a merge resolution since we moved
the function.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
- ssd1307fb: various fixes and improvements, SSD1305 support
- use architecture agnostic functions instead of MTRR functions in
various fbdev drivers
- TI DRA7xx SoC display support (arch/arm/ side)
- OMAPDSS componentization to fix probing order issues
- OMAPDSS scaling fixes
- msm_fb: remove obsoleted driver
* tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (77 commits)
msm: msm_fb: Remove dead code
OMAPDSS: HDMI: wait for framedone when stopping video
OMAPDSS: HDMI4: fix error handling
OMAPDSS: DISPC: scaler debug print
OMAPDSS: DISPC: do only y decimation on OMAP3
OMAPDSS: DISPC: check if scaling setup failed
OMAPDSS: DISPC: fix 64 bit issue in 5-tap
OMAPDSS: DISPC: fix row_inc for OMAP3
OMAPDSS: DISPC: add check for scaling limits
OMAPDSS: DISPC: fix check_horiz_timing_omap3 args
OMAPDSS: DISPC: fix predecimation for YUV modes
OMAPDSS: DISPC: work-around for errata i631
OMAPDSS: simplify submodule reg/unreg code
OMAPDSS: componentize omapdss
OMAPDSS: reorder uninit calls
OMAPDSS: remove uses of __init/__exit
OMAPDSS: fix dss_init_ports error handling
OMAPDSS: refactor dss probe function
OMAPDSS: move 'dss_initialized' to dss driver
fbdev: propagate result of fb_videomode_from_videomode()
...
|
|
Pull power supply and reset updates from Sebastian Reichel:
- new charger drivers: BQ24257, BQ25890, AXP288, RT9455
- MAX17042 battery: add health & temperature support
- BQ2415x charger: add ACPI support
- misc fixes and cleanups
* tag 'for-4.2' of git://git.infradead.org/battery-2.6: (32 commits)
power_supply: Correct kerneldoc copy paste errors
wm831x_power: Fix off-by-one at free_irq()
power_supply: rt9455_charger: Fix error reported by static analysis tool
power_supply: bq24257: use flags argument of devm_gpiod_get
power_supply: bq25890: use flags argument of devm_gpiod_get
sbs-battery: add option to always register battery
power: Add devm_power_supply_get_by_phandle() helper function
power_supply: max17042: Add OF support for setting thresholds
power_supply: sysfs: Bring back write to writeable properties
power_supply: rt9455_charger: Check if CONFIG_USB_PHY is enabled
power: reset: gpio-restart: increase priority slightly
power_supply: bq25890: make chip_id int
power_supply: Add support for Richtek RT9455 battery charger
Documentation: devicetree: Add Richtek RT9455 bindings
of: Add vendor prefix for Richtek Technology Corporation
power_supply: 88pm860x_charger: Do not call free_irq() twice
power: bq24190_charger: Change first_time flag reset condition
power: axp288_charger: axp288 charger driver
power: max17042_battery: add HEALTH and TEMP_* properties support
power_supply: Add support for TI BQ25890 charger chip
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
"Misc fixes"
* tag 'hsi-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction
HSI: nokia-modem: Reduce missing driver message to debug level
HSI: cmt_speech: fix timestamp interface
|
|
Pull SCSI updates from James Bottomley:
"This is the usual grab bag of driver updates (lpfc, hpsa,
megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
There is also one new driver: the Cisco snic. The advansys driver has
been rewritten to get rid of the warning about converting it to the
DMA API, the tape statistics patch got in and finally, there's a
resuffle of SCSI header files to separate more cleanly initiator from
target mode (and better share the common definitions)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
snic: driver for Cisco SCSI HBA
qla2xxx: Fix indentation
qla2xxx: Comment out unreachable code
fusion: remove dead MTRR code
advansys: fix compilation errors and warnings when CONFIG_PCI is not set
mptsas: fix depth param in scsi_track_queue_full
megaraid: fix irq setup process regression
lpfc: Update version to 10.7.0.0 for upstream patch set.
lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
lpfc: Fix scsi task management error message.
lpfc: Fix cq_id masking problem.
lpfc: Fix scsi prep dma buf error.
lpfc: Add support for using block multi-queue
lpfc: Devices are not discovered during takeaway/giveback testing
lpfc: Fix vport deletion failure.
lpfc: Check for active portpeerbeacon.
lpfc: Update driver version for upstream patch set 10.6.0.1.
lpfc: Change buffer pool empty message to miscellaneous category
lpfc: Fix incorrect log message reported for empty FCF record.
lpfc: Fix rport leak.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
- a large cleanup of how device capabilities are checked for various
features
- additional cleanups in the MAD processing
- update to the srp driver
- creation and use of centralized log message helpers
- add const to a number of args to calls and clean up call chain
- add support for extended cq create verb
- add support for timestamps on cq completion
- add support for processing OPA MAD packets
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits)
IB/mad: Add final OPA MAD processing
IB/mad: Add partial Intel OPA MAD support
IB/mad: Add partial Intel OPA MAD support
IB/core: Add OPA MAD core capability flag
IB/mad: Add support for additional MAD info to/from drivers
IB/mad: Convert allocations from kmem_cache to kzalloc
IB/core: Add ability for drivers to report an alternate MAD size.
IB/mad: Support alternate Base Versions when creating MADs
IB/mad: Create a generic helper for DR forwarding checks
IB/mad: Create a generic helper for DR SMP Recv processing
IB/mad: Create a generic helper for DR SMP Send processing
IB/mad: Split IB SMI handling from MAD Recv handler
IB/mad cleanup: Generalize processing of MAD data
IB/mad cleanup: Clean up function params -- find_mad_agent
IB/mlx4: Add support for CQ time-stamping
IB/mlx4: Add mmap call to map the hardware clock
IB/core: Pass hardware specific data in query_device
IB/core: Add timestamp_mask and hca_core_clock to query_device
IB/core: Extend ib_uverbs_create_cq
IB/core: Add CQ creation time-stamping flag
...
|
|
Pull clkdev updates from Russell King:
"This series addresses some breakage in clkdev caused by a previous
patch set from the clk tree which introduced per-user clk structures.
This basically renamed the existing 'struct clk' to 'struct clk_hw',
and introduced a new 'struct clk'.
This change will break anyone using clk_add_alias() with the common
clk code enabled. Thankfully, the intersection of users of
clk_add_alias() and those using the common clk code is practically
zero, but this is something which should be fixed to keep the code
sane.
The problem is that clk_add_alias() does this:
r = clk_get(...);
l = clkdev_alloc(r, ...);
clk_put(...);
which causes the alias to store a pointer to 'r', which has been
freed.
The original patch set tried to work around this problem incorrectly -
at clk_get() time, it tried to convert the struct clk to a struct
clk_hw, and then creating a new struct clk from that. Clearly, if the
original struct clk has been freed, then we have a use-after-free bug.
We have other places in the tree which do something similar, so this
series also addresses those locations too.
This series addresses this problem by converting clkdev to store and
use the clk_hw pointer. This allows clk_get() to only have to create
it's per-user struct clk from the clk_hw. We can also get to the
desired clk_hw at clk_add_alias() or clk lookup creation time, when
the struct clk is "alive".
We also perform some cleanups of the code:
- replacing looped calls to clkdev_add() with clkdev_add_table()
- replacing open-coded lookup allocation (which should have been
using clkdev_alloc()) and subsequent clkdev_add() with
clkdev_create()
- replacing open-coded clk_add_alias() with clk_add_alias()"
* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
clk: s2mps11: use clkdev_create()
ASoC: migor: use clkdev_create()
ARM: omap2: use clkdev_add_alias()
ARM: omap2: use clkdev_create()
ARM: orion: use clkdev_create()
ARM: lpc32xx: convert to use clkdev_add_table()
SH: use clkdev_add_table()
clkdev: add clkdev_create() helper
clkdev: const-ify connection id to clk_add_alias()
clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
clkdev: drop __init from clkdev_add_table()
clk: update clk API documentation to clarify clk_round_rate()
clkdev: use clk_hw internally
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
dir_pages was declared in a lot of filesystems.
Use newly dir_pages() from pagemap.h
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
That function was declared in a lot of filesystems to calculate
directory pages.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
list_entry is just a wrapper for container_of, but it is arguably
wrong (and slightly confusing) to use it when the pointed-to struct
member is not a struct list_head. Use container_of directly instead.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
Currently XFS calls file_remove_privs() without holding i_mutex. This is
wrong because that function can end up messing with file permissions and
file capabilities stored in xattrs for which we need i_mutex held.
Fix the problem by grabbing iolock exclusively when we will need to
change anything in permissions / xattrs.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Comment in include/linux/security.h says that ->inode_killpriv() should
be called when setuid bit is being removed and that similar security
labels (in fact this applies only to file capabilities) should be
removed at this time as well. However we don't call ->inode_killpriv()
when we remove suid bit on truncate.
We fix the problem by calling ->inode_need_killpriv() and subsequently
->inode_killpriv() on truncate the same way as we do it on file write.
After this patch there's only one user of should_remove_suid() - ocfs2 -
and indeed it's buggy because it doesn't call ->inode_killpriv() on
write. However fixing it is difficult because of special locking
constraints.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Provide function telling whether file_remove_privs() will do anything.
Currently we only have should_remove_suid() and that does something
slightly different.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
file_remove_suid() is a misnomer since it removes also file capabilities
stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells
something else than whether file_remove_suid() call is necessary which
leads to bugs.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
file_remove_suid() could mistakenly set S_NOSEC inode bit when root was
modifying the file. As a result following writes to the file by ordinary
user would avoid clearing suid or sgid bits.
Fix the bug by checking actual mode bits before setting S_NOSEC.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If posix_acl_create() returns an error code then "*acl" and "*default_acl"
can be uninitialized or point to freed memory. This is a dangerous thing
to do. For example, it causes a problem in ocfs2_reflink():
fs/ocfs2/refcounttree.c:4327 ocfs2_reflink()
error: potentially using uninitialized 'default_acl'.
I've re-written this so we set the pointers to NULL at the start. I've
added a temporary "clone" variable to hold the value of "*acl" until end.
Setting them to NULL means means we don't need the "no_acl" label. We may
as well remove the "apply_umask" stuff forward and remove that label as
well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Turn
seq_path(..., &file->f_path, ...);
into
seq_file_path(..., file, ...);
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Turn
d_path(&file->f_path, ...);
into
file_path(file, ...);
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Allow auxtrace data to be a multiple of something other than page size.
That is needed for BTS where the buffer contains 24-byte records.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to store command names with the pid. Changing map entries to be
a struct holding pid. Process name is coming in shortly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead provide a method to set the array entries, and another to access
the contents.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1435012588-9007-2-git-send-email-jolsa@kernel.org
[ Split providing the set/get accessors from transforming the entries structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix failure to probe events on arm, the problem was introduced by commit
5a51fcd1f30c ("perf probe: Skip kernel symbols which is out of .text").
For some architectures, the '_etext' label is not in the .text section
(in the .notes section for arm/arm64). Labels out of the .text section
are not loaded as symbols and we get a zero value when looking up its
addresses, which causes all events to be wrongly skipped.
This patch skips checking the text address range when failing to get the
address of '_etext' and thus fixes the problem.
The problem can be reproduced on arm as follows:
# perf probe --add='generic_perform_write'
generic_perform_write+0 is out of .text, skip it.
Probe point 'generic_perform_write' not found.
Error: Failed to add events.
After this patch:
# perf probe --add='generic_perform_write'
Added new event:
probe:generic_perform_write (on generic_perform_write)
You can now use it in all perf tools, such as:
perf record -e probe:generic_perform_write -aR sleep 1
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1434595750-129791-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When dumping events with 'perf report -D' the event print always starts
with a newline (see dump_event()).
Do the same with the "Aggregated stats" print so that it is not jammed
up against the last event print.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With 'perf report -D' the PERF_RECORD_FINISHED_ROUND event was printed
without a newline, resulting in:
0x91a18 [0x8]: PERF_RECORD_FINISHED_ROUNDAggregated stats
Other events print their details, but PERF_RECORD_FINISHED_ROUND doesn't
have any so just add a print for a newline.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The Intel events use a dot to separate event name and unit mask. Allow
dot in names in the scanner, and remove special handling of dot as EOF.
Also remove the hack in jevents to replace dot with underscore. This way
dotted events can be specified directly by the user.
I'm not fully sure this change to the scanner is correct (what was the
dot special case good for?), but I haven't found anything that breaks
with it so far at least.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-8-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Separate the event parsing code in perf_pmu__new_alias() out into a
separate function __perf_pmu__new_alias() so that code can be called
indepdently.
This is based on an earlier patch from Andi Kleen.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-5-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Jiri Olsa pointed out, that the <linux/compiler.h> defines the attribute
'__weak'. We might as well use that.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"As usual, mostly comment, kerneldoc and printk() fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
lpfc: Grammar s/an negative/a negative/
ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/
cx25821: cx25821-medusa-reg.h: fix 0x0x prefix
lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants
rapidio: Fix kerneldoc and comment
qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config()
treewide: Kconfig: fix wording / spelling
usb/serial: fix grammar in Kconfig help text for FTDI_SIO
megaraid_sas: fix kerneldoc
netfilter: ebtables: fix comment grammar
drm/radeon: fix comment
isdn: fix grammar in comment
ARM: KVM: fix comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:
- symbol lookup locking fix, from Miroslav Benes
- error handling improvements in case of failure of the module coming
notifier, from Minfei Huang
- we were too pessimistic when kASLR has been enabled on x86 and were
dropping address hints on the floor unnecessarily in such case. Fix
from Jiri Kosina
- a few other small fixes and cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: add module locking around kallsyms calls
livepatch: annotate klp_init() with __init
livepatch: introduce patch/func-walking helpers
livepatch: make kobject in klp_object statically allocated
livepatch: Prevent patch inconsistencies if the coming module notifier fails
livepatch: match return value to function signature
x86: kaslr: fix build due to missing ALIGN definition
livepatch: x86: make kASLR logic more accurate
x86: introduce kaslr_offset()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- spurious power/wakeup sysfs files removal for I2C-HID devices, from
Andrew Duggan
- Logitech M560 support, from Goffredo Baroncelli
- a lot of housekeeping cleanups to hid-lg4ff driver, from Michal Maly
- improved support for Plantronics devices, from Terry Junge
- Sony Motion Controller and Navigation Controller support and
subsequent cleanups of hid-sony driver, from Frank Praznik and Simon
Wood
- HW support improvements to the Wacom driver, from Jason Gerecke and
Ping Cheng
- assorted small cleanups and device ID additions all over the place
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (69 commits)
HID: cypress: use swap() in cp_report_fixup()
HID: microsoft: Add Surface Power Cover
HID: hid-sony: Fix report descriptor for Navigation Controller
HID: hid-sony: Navigation controller only has 1 LED and no rumble
HID: hid-sony: Add BT support for Navigation Controller
HID: wacom: Introduce new 'touch_input' device
HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'
HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type
HID: wacom: Treat features->device_type values as flags
HID: wacom: Simplify 'wacom_update_name'
HID: rmi: Disable populating F30 when the touchpad has physical buttons
HID: plantronics: Update to map volume up/down controls
HID: sony: PS Move fix report descriptor
HID: sony: PS3 Move enable LEDs and Rumble via BT
HID: sony: Add support PS3 Move Battery via BT
HID: sony: Add quirk for MOTION_CONTROLLER_BT
HID: sony: Support PS3 Move Controller when connected via Bluetooth
HID: i2c-hid: Do not set the ACPI companion field in the HID device
usb, HID: Remove Vernier devices from lsusb and hid_ignore_list
HID: hidpp: Add driver for mouse logitech M560
...
|
|
Pull PCMCIA update from Dominik Brodowski:
"A few PCMCIA fixes and cleanups are available in the PCMCIA tree.
Most of them are trivial and self-explanatory. Of particular note are
the last three patches which add an important hardware quirk for
Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
sockets), fix resource leaks in yenta_socket enable/disable call
paths, and fix a regression caused by patch 1c6c9b1d9d25 since v4.0.
Alan stated he is OK with me pushing this patch upstream. Once it
works out well in your tree, I will push it to stable for 4.0/4.1 as
well"
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
pcmcia: do not break rsrc_nonstatic when handling anonymous cards
pcmcia: Fix resource leaks in yenta_probe() and _close()
Disable write buffering on Toshiba ToPIC95
pcmcia: Convert dev_printk to dev_<level>
pcmcia/vrc4171: Remove typedefs for enums and struct
pcmcia: Remove typedef in structs and emum
pcmcia: Remove typedef tuple_flags
drivers: pcmcia: electra_cf.c fix checkpatch error and warnings
drivers: pcmcia: ds.c fix checkpatch errors
PCMCIA: Remove commented references to dead class_device_create_file()
drivers/pcmcia/electra_cf.c: add missing iounmap and kfree
pcmcia: replace open-coded ARRAY_SIZE with macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.2 merge window:
Enumeration
- Move pci_ari_enabled() to global header (Alex Williamson)
- Account for ARI in _PRT lookups (Alex Williamson)
- Remove unused pci_scan_bus_parented() (Yijing Wang)
Resource management
- Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas)
- Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas)
- Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan)
- Add pci_bus_addr_t (Yinghai Lu)
PCI device hotplug
- Wait for pciehp command completion where necessary (Alex Williamson)
- Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki)
- Check ignore_hotplug for all downstream devices (Rafael J. Wysocki)
- Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki)
- Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas)
- Clean up pciehp debug logging (Bjorn Helgaas)
Power management
- Remove redundant PCIe port type checking (Yijing Wang)
- Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang)
- Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang)
- Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas)
- Simplify Clock Power Management setting (Bjorn Helgaas)
Virtualization
- Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson)
- Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus)
MSI
- Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin)
- Remove unused pci_msi_off() (Bjorn Helgaas)
- Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Drop pci_msi_off() calls during probe (Michael S. Tsirkin)
APM X-Gene host bridge driver
- Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang)
- Add APM X-Gene PCIe MSI DTS nodes (Duc Dang)
- Disable Configuration Request Retry Status for v1 silicon (Duc Dang)
- Allow config access to Root Port even when link is down (Duc Dang)
Broadcom iProc host bridge driver
- Allow override of device tree IRQ mapping function (Hauke Mehrtens)
- Add BCMA PCIe driver (Hauke Mehrtens)
- Directly add PCI resources (Hauke Mehrtens)
- Free resource list after registration (Hauke Mehrtens)
Freescale i.MX6 host bridge driver
- Add speed change timeout message (Troy Kisky)
- Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas)
Freescale Layerscape host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
- Factor out ls_pcie_establish_link() (Bjorn Helgaas)
Marvell MVEBU host bridge driver
- Remove mvebu_pcie_scan_bus() (Yijing Wang)
NVIDIA Tegra host bridge driver
- Remove tegra_pcie_scan_bus() (Yijing Wang)
Synopsys DesignWare host bridge driver
- Consolidate outbound iATU programming functions (Jisheng Zhang)
- Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang)
- Add support for x8 links (Zhou Wang)
- Wait for link to come up with consistent style (Bjorn Helgaas)
- Use pci_scan_root_bus() for simplicity (Yijing Wang)
TI DRA7xx host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
Miscellaneous
- Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas)
- Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas)
- Remove unused pcibios_select_root() (again) (Bjorn Helgaas)
- Remove unused pci_dma_burst_advice() (Bjorn Helgaas)
- xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)"
* tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: pciehp: Inline the "handle event" functions into the ISR
PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event()
PCI: pciehp: Make queue_interrupt_event() void
PCI: xgene: Allow config access to Root Port even when link is down
PCI: xgene: Disable Configuration Request Retry Status for v1 silicon
PCI: pciehp: Clean up debug logging
x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing
PCI: imx6: Add #define PCIE_RC_LCSR
PCI: imx6: Use "u32", not "uint32_t"
PCI: Remove unused pci_scan_bus_parented()
xen/pcifront: Don't use deprecated function pci_scan_bus_parented()
PCI: imx6: Add speed change timeout message
PCI/ASPM: Simplify Clock Power Management setting
PCI: designware: Wait for link to come up with consistent style
PCI: layerscape: Factor out ls_pcie_establish_link()
PCI: layerscape: Use dw_pcie_link_up() consistently
PCI: dra7xx: Use dw_pcie_link_up() consistently
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
PCI: pciehp: Wait for hotplug command completion where necessary
PCI: Remove unused pci_dma_burst_advice()
...
|
