summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-26perf stat: Using init_stats instead of memsetJiri Olsa
The init_stats function is meant to init 'struct stats'. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-21-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Rename print_interval to process_intervalJiri Olsa
It suits better, because the function also reads counter's data. Also the 'print_interval' name will be used in following generalization of counters display. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-20-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Remove perf_evsel__read_cb functionJiri Olsa
It's no longer used, the stat command uses perf_evsel__read now. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-19-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Move perf_stat initialization counter process codeJiri Olsa
Moving perf_stat initialization counter process code, to make the reading path free of processing logic. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-18-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Move zero_per_pkg into counter process codeJiri Olsa
Moving zero_per_pkg into counter process code, to make the reading path free of processing logic. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-17-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Separate counters reading and processingJiri Olsa
Separating counters reading and processing so we could use the processing part in following patches. Using simple reading via perf_evsel__read function to read counters now, because part of the processing was in the read_cb callback. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-16-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Introduce read_counters functionJiri Olsa
Moving read counters logic into single read_counters function, which will be called for both interval and overall processing legs. The reason is to split reading and processing (following patches) counters code, so we could read counters from other sources (like perf.data) and process them in the same way as 'perf stat' command does. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-15-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Introduce perf_evsel__read functionJiri Olsa
Adding simple read function that reads/store data into given struct perf_counts_values *count object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-14-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Introduce perf_evsel__alloc_stats functionJiri Olsa
Move all stat allocation logic related to stat object under single function. This way we can use it separately for stat object out of evlist object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-13-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Move perf_evlist__(alloc|free|reset)_stats into stat objectJiri Olsa
Moving perf_evlist__(alloc|free|reset)_stats into stat object, so it could be used in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-12-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Move perf_evsel__(alloc|free)_prev_raw_counts into stat objectJiri Olsa
Moving perf_evsel__(alloc|free)_prev_raw_counts into stat object, so it could be used in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-11-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Move perf_evsel__(alloc|free|reset)_stat_priv into stat objectJiri Olsa
Moving perf_evsel__(alloc|free|reset)_stat_priv into stat object, so it could be used outside stat command in following patches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-10-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Introduce perf_evlist__reset_statsJiri Olsa
To fit in with the rest of the helpers (alloc and free). Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-9-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Rename struct perf_counts::cpu member to valuesJiri Olsa
Renaming 'struct xyarray *cpu' pointer to more fitting/generic values, because now we store both cpu and thread values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Make stats work over the thread dimensionJiri Olsa
Now that we have space for thread dimension counts, let's store it. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf stat: Use xyarray for cpu evsel countsJiri Olsa
Switching single dimensional array of 'struct perf_counts_values' with xyarray object, so we could store thread dimension counts. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26dm cache policy smq: fix "default" version to be 1.4.0Mike Snitzer
Commit bccab6a0 ("dm cache: switch the "default" cache replacement policy from mq to smq") should've incremented the "default" policy's version number to 1.4.0 rather than reverting to version 1.0.0. Reported-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26dm: bump the ioctl version to 4.32.0Mike Snitzer
This fix enables userspace to detect that the dm-stats changes from the 4.2 merge are in place. Reported-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26Revert "block, dm: don't copy bios for request clones"Mike Snitzer
This reverts commit 5f1b670d0bef508a5554d92525f5f6d00d640b38. Justification for revert as reported in this dm-devel post: https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html this change should not be pushed to mainline yet. Firstly, Christoph has a newer version of the patch that fixes silent data corruption problem: https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html And the new version still depends on LLDDs to always complete requests to the end when error happens, while block API doesn't enforce such a requirement. If the assumption is ever broken, the inconsistency between request and bio (e.g. rq->__sector and rq->bio) will cause silent data corruption: https://www.redhat.com/archives/dm-devel/2015-June/msg00022.html Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26perf stat: Introduce perf_counts functionJiri Olsa
Introducing perf_counts function, that returns 'struct perf_counts_values' pointer for given cpu. Also moving perf_counts* structures into stat.h. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26Revert "dm: do not allocate any mempools for blk-mq request-based DM"Mike Snitzer
This reverts commit cbc4e3c1350beb47beab8f34ad9be3d34a20c705. Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-26perf tests: Add thread_map object testsJiri Olsa
Adding thread_map object tests for comm name values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf thrad_map: Add comm string into arrayJiri Olsa
Adding support to hold comm name together with pids in 'struct thread_map'. It will be useful for --per-thread option to display task pid together with task name. Adding thread_map__read_comms function that reads/set comm string for the 'struct thread_map'. Getting the task name from /proc/$pid/comm. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf thread_map: Introduce thread_map__reset functionJiri Olsa
We need to reset newly allocated 'struct thread_map_data' entries, because we will introduce new comm memeber, which will get set later or not at all. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1435310967-14570-2-git-send-email-jolsa@kernel.org [ Use sizeof(map->map[0]) to be independent of the array entry type ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26perf trace: Validate syscall list passed via -e argumentArnaldo Carvalho de Melo
The 'trace' tool was accepting any names passed and just looking if syscalls returned via the raw_syscalls:* tracepoints were in that list, leading to it accepting perf events and then never finding any, as those are not valid syscall names, confusing users. Fix it by checking each entry in the list using audit_name_to_syscall, telling the user which entries are invalid and suggesting where to look for valid syscall names. E.g: [root@zoo ~]# trace -e open,foo,bar,close,baz Error: Invalid syscall bar, baz, foo Hint: try 'perf list syscalls:sys_enter_*' Hint: and: 'man syscalls' [root@zoo ~]# Reported-by: Flavio Leitner <fbl@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-4g1i3m1z6fzsrznn2umi02wa@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-26arm64: bpf: fix endianness conversion bugsXi Wang
Upper bits should be zeroed in endianness conversion: - even when there's no need to change endianness (i.e., BPF_FROM_BE on big endian or BPF_FROM_LE on little endian); - after rev16. This patch fixes such bugs by emitting extra instructions to clear upper bits. Cc: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Fixes: e54bcde3d69d ("arm64: eBPF JIT compiler") Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-26i40evf: don't configure unused RSS queuesMitch Williams
The driver will only configure as many queues as there are available CPUs, up the maximum number of queues. However, it always configures RSS as though it is using the maximum number of queues. This can cause the device to drop a lot of RX traffic, as the packets get assigned to nonfunctional queues. Fix this by only configuring RSS with the number of active queues. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26i40evf: fix panic during MTU changeMitch Williams
Down was requesting queue disables, but then exited immediately without waiting for the queues to actually disable. This could allow any function called after i40evf_down to run immediately, including i40evf_up, and causes a memory leak. Removing the whole reinit_locked function is the best way to go about this, and allows for the driver to handle the state changes by requesting reset from the periodic timer. Also, add a couple WARN_ONs in slow path to help us recognize if we re-introduce this issue or missed any cases. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - k1 workaround for LPT is not required for SPTYanir Lubetkin
In SPT hardware does not require this driver workaround. Removed the conditional that caused K1 workaround execution on SPT. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - Increase minimum FIFO read/write min gapYanir Lubetkin
Due to clocking changes in the Skylake platform, there was i219 data corruption. To work around this, HW team reported the need to increase the minimum gap between the PHY FIFO read and write pointers. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - increase IPG for speed 10/100 full duplexYanir Lubetkin
In SPT/i219, there were CRC errors in speed 10/100 full duplex. The solution given by the HW team is to increase the IPG from 8 to 0xC Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: i219 - fix to enable both ULP and EEE in Sx stateYanir Lubetkin
In i219, there is a hardware bug that prevented ULP entry. A side effect of the original software fix for this was that EEE in Sx couldn't be enabled. This patch implements a modified flow that allows both ULP and EEE in Sx. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure pathMichel Thierry
If for some reason [1], the page directory/table does not exist, clear_range would end up in an infinite while loop. Introduced by commit 06fda602dbca ("drm/i915: Create page table allocators"). [1] This is already being addressed in one of Mika's patches: http://mid.gmane.org/1432314314-23530-17-git-send-email-mika.kuoppala@intel.com Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Reported-by: John Harrison <john.c.harrison@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-26e1000e: synchronization of MAC-PHY interface only on non- ME systemsYanir Lubetkin
On power up, the MAC - PHY interface needs to be set to PCIe, even if cable is disconnected. In ME systems, the ME handles this on exit from Sx state. In non-ME, the driver handles it. Added a check for non-ME system to the driver code that handles that. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26e1000e: fix locking issue with e1000e_disable_aspmYanir Lubetkin
e1000e_disable_aspm called pci_disable_link_state_locked which requires pci_bus_sem to be held, but is also called from places where this semaphore was not previously acquired. This patch implements two flavors of disable_aspm, one that acquires the lock, and the other (_locked) which should be called when the semaphore is already acquired. Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26igb: bump version of igb to 5.2.18Todd Fujinaka
Bump version of igb to igb-5.2.18 Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26igb: disable IPv6 extension header processingTodd Fujinaka
Disable IPv6 extension header processing as per hardware errata. Also fix copyright date. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26drm/i915: Fix IPS related flickerRodrigo Vivi
We cannot let IPS enabled with no plane on the pipe: BSpec: "IPS cannot be enabled until after at least one plane has been enabled for at least one vertical blank." and "IPS must be disabled while there is still at least one plane enabled on the same pipe as IPS." This restriction apply to HSW and BDW. However a shortcut path on update primary plane function to make primary plane invisible by setting DSPCTRL to 0 was leting IPS enabled while there was no other plane enabled on the pipe causing flickerings that we were believing that it was caused by that other restriction where ips cannot be used when pixel rate is greater than 95% of cdclok. v2: Don't mess with Atomic path as pointed out by Ville. Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85583 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-26watchdog: imx2_wdt: Disable previously acquired clock on error pathFabio Estevam
If watchdog_register_device() fails we should disable the previously acquired wdev->clk clock on error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26watchdog: imx2_wdt: Check for clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and refactorings from Arnaldo Carvalho de Melo: Infrastructure changes: - Reference count the cpu_map and thread_map classes. (Jiri Olsa) - Set evsel->{cpus,threads} from the evlist, if not set, allowing the generalization of some 'perf stat' functions that previously were accessing private static evlist variable. (Jiri Olsa) - Delete an unnecessary check before the calling free_event_desc() (Markus Elfring) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-26Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix to show proper convergence stats in 'perf bench numa' (Srikar Dronamraju) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-26ALSA: hda - restore the MIC FIXUP for some Dell machinesHui Wang
Those FIXUPs were applied to the machines through pin quirks, but recently the PCI_QUIRK makes them can't apply to the machines. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99851 Signed-off-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> # v4.1 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-26ALSA: jack: Fix endless loop at unique index detectionTakashi Iwai
While the commit [d0a601c278de: ALSA: jack: Fix the id uniqueness check] fixes the wrong string check, it leads to a worse result -- the loop in get_available_index() goes into an endless loop. The cause is that snd_ctl_find_id() returns the object assigned to the numid if it's set. Thus it points to the previous entry again. This patch clears the numid field for the next call properly. Reported-and-tested-by: Tomáš Pružina <pruzinat@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-25Merge tag 'rtc-v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - Coding style and whitespace fixes (interface, Makefile and Kconfig) - New rtc_tm_sub() helper - New CONFIG_RTC_SYSTOHC_DEVICE option - Removed rtc_set_mmss() New drivers: - Mediatek MT6397 - Cortina Gemini Drivers: - Year 2106 fixes for isl1208, pcf8563 and sunxi - update author email for at32ap700x and efi - ds1307: alarm fix - efi: use correct EFI 'epoch' - hym8563: make irq optional - imxdi: cleanups and better handling of the security/tamper monitoring - snvs: fix wakealarm - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563 - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx, hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv, mxc, s3c, spear, v3020 - Kconfig fixes for stmp3xxx and xgene" * tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits) rtc: remove useless I2C dependencies rtc: whitespace fixes rtc: Properly sort Makefile MAINTAINERS: Add RTC subsystem repository rtc: pfc8563: fix uninitialized variable warning rtc: ds1307: Enable the mcp794xx alarm after programming time rtc: hym8563: make the irq optional rtc: gemini: fix cocci warnings rtc: mv: correct 24 hour error message rtc: mv: use BIT() rtc: efi: use correct EFI 'epoch' rtc: interface: Remove rtc_set_mmss() sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC rtc: NTP: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization rtc: sunxi: Replace deprecated rtc_tm_to_time() rtc: isl1208: Replace deprecated rtc_tm_to_time() rtc: Introduce rtc_tm_sub() helper function rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time() rtc: palmas: Initialise bb_charging flag before using it rtc: simplify use of devm_ioremap_resource ...
2015-06-25Merge branch 'i2c/for-4.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Mediatek I2C, APM X-Gene, Broadcom Settop - major updates to at91, davinci - bugfixes to the mux infrastructure when dealing with the new quirk mechanism - more users for the bus recovery feature - further improvements to the slave framework Plus the usual bunch of smaller driver and core improvements and fixes. There is one patch removing old code from an ARM platform. This has been acked by the sh_mobile maintainer Simon Horman" * 'i2c/for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (48 commits) i2c: busses: i2c-bcm2835: limits cdiv to allowed values i2c: sh_mobile: use proper type for timeout i2c: sh_mobile: use adapter default for timeout i2c: rcar: use proper type for timeout i2c: rcar: use adapter default for timeout i2c: designware: Make sure the device is suspended before disabling runtime PM i2c: tegra: apply size limit quirk i2c: tegra: don't advertise SMBUS_QUICK i2c: octeon: remove unused signal handling i2c: davinci: Optimize SCL generation i2c: mux: pca954x: Use __i2c_transfer because of quirks i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer() i2c: use parent adapter quirks in mux i2c: bcm2835: clear reserved bits in S-Register ARM: shmobile: r8a7740: remove I2C errata handling i2c: sh_mobile: add errata workaround i2c: at91: fix code checker warnings i2c: busses: xgene-slimpro: fix incorrect __init declation for probe i2c: davinci: Avoid sending to own address i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy() ...
2015-06-25Merge branch 'mailbox-for-next' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar. * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/bcm2835: Fix mailbox full detection. dt: mailbox: Remove 'mbox-names property is discouraged' message from binding mailbox: Add ability for clients to request channels by name mailbox: Enable BCM2835 mailbox support dt/bindings: Add binding for the BCM2835 mailbox driver mailbox: Fix up error handling in mbox_request_channel() mailbox: Make mbox_chan_ops const mailbox: altera: Add dependency on HAS_IOMEM
2015-06-26Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'Rafael J. Wysocki
* acpi-video: ACPI / video: Inline acpi_video_set_dmi_backlight_type * device-properties: ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() * pm-sleep: PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure * pm-cpuidle: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-26tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP ↵preeti
set in periodic mode On some archs, the local clockevent device stops in deep cpuidle states. The broadcast framework is used to wakeup cpus in these idle states, in which either an external clockevent device is used to send wakeup ipis or the hrtimer broadcast framework kicks in in the absence of such a device. One cpu is nominated as the broadcast cpu and this cpu sends wakeup ipis to sleeping cpus at the appropriate time. This is the implementation in the oneshot mode of broadcast. In periodic mode of broadcast however, the presence of such cpuidle states results in the cpuidle driver calling tick_broadcast_enable() which shuts down the local clockevent devices of all the cpus and appoints the tick broadcast device as the clockevent device for each of them. This works on those archs where the tick broadcast device is a real clockevent device. But on archs which depend on the hrtimer mode of broadcast, the tick broadcast device hapens to be a pseudo device. The consequence is that the local clockevent devices of all cpus are shutdown and the kernel hangs at boot time in periodic mode. Let us thus not register the cpuidle states which have CPUIDLE_FLAG_TIMER_STOP flag set, on archs which depend on the hrtimer mode of broadcast in periodic mode. This patch takes care of doing this on powerpc. The cpus would not have entered into such deep cpuidle states in periodic mode on powerpc anyway. So there is no loss here. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-25Merge tag 'edac/v4.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: "Some fixes and additions to the EDAC driver used on modern Intel x86 CPUs. It includes support for Broadwell EP/EX platforms and fixes for motherboards with more than 2 CPU sockets" * tag 'edac/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: support for Broadwell -EP and -EX sb_edac: Fix support for systems with two home agents per socket sb_edac: Fix a typo and a thinko in address handling for Haswell EDAC: Remove arbitrary limit on number of channels
generated by cgit (git 2.34.1) at 2025-09-13 18:40:39 +0000