Age | Commit message (Collapse) | Author |
|
When reporting a jack unplug there's no need to make the reported
flags conditional on which flags were reported during the plug
event. It's perfectly safe to report all flags and buttons as
not-present and let the higher code filter for changes.
There's also no need to make two separate snd_soc_jack_report()
calls for presence flags and button flags. It can all be done in
one report.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211116163901.45390-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RS_PLUG and RS_UNPLUG interrupt masks are always written as 1 so
those writes are redundant and can be deleted.
This makes it completely clear in the code that only the TS_PLUG and
TS_UNPLUG masks are being changed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211116163901.45390-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are multiple places where DETECT_MODE is included in a register
write, but in every case it is written as 0. Removing these redundant
writes makes the code less cluttered and also makes it obvious that
DETECT_MODE is never changed.
A single initialization to 0 is added to cs42l42_setup_hs_type_detect().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211116163901.45390-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix divider calculation in the case of 32 bits channel
configuration, when no master clock is used.
Fixes: e4e6ec7b127c ("ASoC: stm32: Add I2S driver")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20211117104404.3832-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the Intel example and simplify the Kconfig
a) start from the end-product for 'select' chains
b) use 'depends on' to filter out configurations.
c) use snd-sof-of as a common module without any 'select'
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211116124131.46414-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently same slim channel map setup for every dai link, which is redundant.
Fix this by adding a flag and conditionally setting these channel maps.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116115021.14213-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason we ended up using snd_soc_component_write_field
for HPHL and snd_soc_component_update_bits for HPHR, so fix this.
Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer,
this could be misleading to the user which can start sending stream leading
to unnecessary errors.
Fix this by properly returning the errors.
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2
are not marked as volatile. This has resulted in a missing interrupt bug
while performing runtime pm. regcache_sync() during runtime pm resume path
will write to Interrupt clear registers with previous values which basically
clears the pending interrupt and actual interrupt handler never sees this
interrupt.
This issue is more visible with headset plug-in plug-out case compared to
headset button.
Fix this by adding the Interrupt clear registers to volatile range
Fixes: 8d78602aa87a ("ASoC: codecs: wcd938x: add basic driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114623.11891-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Validate port id before it starts sending commands to dsp this would
make error handling simpler.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
reset value for port is -1 so printing an hex would not give us very
useful debug information, so use %d instead.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Error handling in q6asm_dai_prepare() seems to be completely broken,
Fix this by handling it properly.
Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command
rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero.
DSP will throw errors if we try to disable the clock using existing code.
Fix this by properly handling the clk release.
Fixes: 9a0e5d6fb16f ("ASoC: qdsp6: audioreach: add q6prm support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is a second attempt to unify the x86-specific SG-buffer handling
code with the new standard non-contiguous page handler.
The first try (in commit 2d9ea39917a4) failed due to the wrong page
and address calculations, hence reverted. (And the second try failed
due to a copy&paste error.) Now it's corrected with the previous fix
for noncontig pages, and the proper sg page iteration by this patch.
After the migration, SNDRV_DMA_TYPE_DMA_SG becomes identical with
SNDRV_DMA_TYPE_NONCONTIG on x86, while others still fall back to
SNDRV_DMA_TYPE_DEV.
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Harald Arnesen <harald@skogtun.org>
Link: https://lore.kernel.org/r/20211017074859.24112-4-tiwai@suse.de
Link: https://lore.kernel.org/r/20211109062235.22310-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20211116073358.19741-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a codec is unbound dynamically via sysfs while its stream is in
use, we may face a potential deadlock at the proc remove or a UAF.
This happens since the hda_pcm is managed by a linked list, as it
handles the hda_pcm object release via kref.
When a PCM is opened at the unbinding time, the release of hda_pcm
gets delayed and it ends up with the close of the PCM stream releasing
the associated hda_pcm object of its own. The hda_pcm destructor
contains the PCM device release that includes the removal of procfs
entries. And, this removal has the sync of the close of all in-use
files -- which would never finish because it's called from the PCM
file descriptor itself, i.e. it's trying to shoot its foot.
For addressing the deadlock above, this patch changes the way to
manage and release the hda_pcm object. The kref of hda_pcm is
dropped, and instead a simple refcount is introduced in hda_codec for
keeping the track of the active PCM streams, and at each PCM open and
close, this refcount is adjusted accordingly. At unbinding, the
driver calls snd_device_disconnect() for each PCM stream, then
synchronizes with the refcount finish, and finally releases the object
resources.
Fixes: bbbc7e8502c9 ("ALSA: hda - Allocate hda_pcm objects dynamically")
Link: https://lore.kernel.org/r/20211116072459.18930-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: d13bd412dce2 ("ALSA: hda - Manage kcontrol lists")
Link: https://lore.kernel.org/r/20211116071314.15065-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: a8ff48cb7083 ("ALSA: pcm: Free chmap at PCM free callback, too")
Link: https://lore.kernel.org/r/20211116071314.15065-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices")
Link: https://lore.kernel.org/r/20211116071314.15065-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Bose Revolve+ SoundLink (0a57:40fa) advertises invalid dB level for
the speaker volume. This patch provides the correction in the mixer
map quirk table entry.
Note that this requires the prerequisite change to add min_mute flag
to the dB map table.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1192375
Link: https://lore.kernel.org/r/20211116065415.11159-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some devices do mute the volume at the minimal volume, and for such
devices, we need to set SNDRV_CTL_TLVT_DB_MINMAX_MUTE to the TLV
information. It corresponds to setting usb_mixer_elem_info.min_mute
flag in the USB-audio driver.
This patch adds a new field min_mute in usbmix_dB_map so that the
mixer map entry can pass the flag.
Link: https://lore.kernel.org/r/20211116065415.11159-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The values in usbmix_dB_map should be rather signed while we're using
u32. As the copied target (usb_mixer_elem_info.dBmin and dBmax) is
int, let's make them also int.
Link: https://lore.kernel.org/r/20211116065415.11159-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Convert the Wolfson WM8903 Ultra-Low Power Stereo CODEC Device Tree
binding documentation to json-schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211028124639.38420-1-david@ixit.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update MBHC driver to support special headset such as apple
and huwawei headsets.
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1636960288-27537-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes the static analysis warning as it is correctly
indicating a possible code path, it cannot know that for the affected
firmware versions subname would always be NULL.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211115120154.56782-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To ensure clean unload of the machine driver, components and topology, do
the unregister before we free IPC and debugfs.
It is a possibility that part of the unregister we would have IPC
communication with the firmware.
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211102094756.9317-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Considering the current transition of the GPIO subsystem, remove all
dependencies of the legacy GPIO interface (linux/gpio.h and linux
/of_gpio.h) and replace it with the descriptor-based GPIO approach.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YXWo/9o7ye9a11aR@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch removes unused included header files and moves others into
cs_dsp.h to ensure that types referenced in the header file are properly
described to prevent compiler warnings.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211115120215.56824-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds an ALSA control so that the slow-start audio ramp feature
can be disabled. This is useful for high-definition audio applications.
The register field is unusual in that it is a 3-bit field with only
two valid values, 000=off and 111=on.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211101101006.13092-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The machine driver is a generic machine driver for SOF with nau8825
codec w or w/o speaker additionally. Depending on the SOC
HDMI, DMIC, Bluetooth offload support are added dynamically.
Only add information related to SOF since the machine driver was
only tested with SOF.
There are currently 4 i2s machine variants of ADL.
This supports the headphone NUA8825(SSP0) alone or with smart or dumb
speakers.
Board 2,3,4 use SSP2 for Bluetooth offload support except board 1.
Board 1 : NAU8825 + RT1019P(SSP2)
Board 2 : NAU8825 + MAX98373(SSP1)
Board 3 : NAU8825 + MAX98360A(SSP1)
Board 4 : NAU8825
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211109133808.8729-1-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'hphpa_on' is know to be false, so this is just dead code that should be
removed.
Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/57a89cc31eb2312addd3c77896d7df8206aef138.1635967035.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support for HALO DSP and firmware
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211029214028.401284-2-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the old .txt binding with a new schema binding.
At the same time, some of the descriptions are updated to make them
clearer, fix errors, or just make them fit better into the style
of schema binding.
The cirrus,hs-bias-ramp-rate property was missing from the old .txt
binding and has been added to the yaml.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211028140902.11786-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<yung-chuan.liao@linux.intel.com>:
This series provides a way to use constant dailink numbers for different
devices. So that we don't need to renumber them in topologies.
Some patches with different purpose are sent together in this series
since they are dependent.
Bard Liao (8):
ASoC: intel: sof_sdw: return the original error number
ASoC: intel: sof_sdw: rename be_index/link_id to link_index
ASoC: intel: sof_sdw: Use a fixed DAI link id for AMP
ASoC: intel: sof_sdw: move DMIC link id overwrite to
create_sdw_dailink
ASoC: intel: sof_sdw: remove SOF_RT715_DAI_ID_FIX quirk
ASoC: intel: sof_sdw: remove sof_sdw_mic_codec_mockup_init
ASoC: intel: sof_sdw: remove get_next_be_id
ASoC: intel: sof_sdw: add link adr order check
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: fix jack detection on HP Spectre x360
convertible
ASoC: Intel: sof_sdw: add SKU for Dell Latitude 9520
sound/soc/intel/boards/sof_sdw.c | 152 ++++++++++----------
sound/soc/intel/boards/sof_sdw_common.h | 7 +-
sound/soc/intel/boards/sof_sdw_rt715.c | 7 -
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 7 -
4 files changed, 85 insertions(+), 88 deletions(-)
--
2.17.1
|
|
<vincent.knecht@mailoo.org>:
This is the continuation of a previous series [1] where
- patch 1/4 is removed in favor of using pin switch
This will be posted independently of tfa989x support,
since it mainly require changes to sound/soc/qcom/common.c
and device DTS.
- patch 2/4 is already merged
so here are reworked patch 3/4 (bindings fixed and example added)
and patch 4/4 unchanged.
[1] https://patchwork.kernel.org/project/alsa-devel/cover/20211024085840.1536438-1-vincent.knecht@mailoo.org/
Vincent Knecht (2):
ASoC: dt-bindings: nxp, tfa989x: Add rcv-gpios property for tfa9897
ASoC: codecs: tfa989x: Add support for tfa9897 optional rcv-gpios
.../bindings/sound/nxp,tfa989x.yaml | 41 +++++++++++++++++++
sound/soc/codecs/tfa989x.c | 20 ++++++++-
2 files changed, 60 insertions(+), 1 deletion(-)
--
2.31.1
|
|
Changes from ChiYuan Huang <cy_huang@richtek.com> to fix a couple of
bugs and add a new device ID/quirk for the rt9120s to the driver.
|
|
We assume the adr order described in a snd_soc_acpi_link_adr array is
jack -> amp -> mic. We follow the same order to implement the topology.
We will need a special topology if we configure a snd_soc_acpi_link_adr
array with different order. Adding a check and a warning message can
remind people to keep the order when adding a new snd_soc_acpi_link_adr
array.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAI link id will not be set from sdw codec init feedback function,
and be_id is changed by create_sdw_dailink() now. So we don't need
get_next_be_id() anymore.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now, we set DAI link id as SDW_DMIC_DAI_ID for all DMICs.
No need to set it in sof_sdw_mic_codec_mockup_init.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SOF_RT715_DAI_ID_FIX is not used anywhere. Remove it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can apply the fixed dai link id for DMICs in create_sdw_dailink().
No need to set it in each DMIC's callback.
The fixed dai link id is not only for rt715 and rt715-sdca, but for all
DMICs, therefore we remove the SOF_RT715_DAI_ID_FIX check as well.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we assign SoundWire DAI link id according to the order in
the link address table, with the assumption that the headset codec is
listed first, then amplifiers and last capture devices. If the headset
codec is not present in a platform, the dai link for amplifiers will be
shifted, which can be handled in two ways
a) modify the topology to renumber the dailink changes
b) keep the dailink numbers constant in topology but also avoid the
variations in the machine driver.
This patch adds support for option b), the dailink index for amplifiers
and capture devices becomes fixed.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The link_id variable in sof_card_dai_links_create() and be_index argument
in create_sdw_dailink() is actually links' index. Rename them to link_index
to be consistent.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Different SKUs seem to be used for the same design.
BugLink: https://github.com/thesofproject/linux/issues/3206
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Tests on device show the JD2 mode does not work at all, the 'Headphone
Jack' and 'Headset Mic Jack' are shown as 'on' always.
JD1 seems to be the better option, with at least a change between the
two cases.
Jack not plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=12
numid=12,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
Jack plugged-in:
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
[root@fedora ~]# amixer -Dhw:0 cget numid=13
numid=13,iface=CARD,name='Headset Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
The 'Headset Mic Jack' is updated with a delay which seems normal with
additional calibration needed.
Fixes: d92e279dee56 ('ASoC: Intel: sof_sdw: add quirk for HP Spectre x360 convertible')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We don't want to convert create_sdw_dailink()'s return value to -ENOMEM.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211027021824.24776-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Send the DMA_TRACE_FREE IPC during release to stop and free the trace
DMA in the DSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Parse all the trace DMA IPC commands in ipc_log_header().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new SOF_IPC_TRACE_DMA_FREE IPC command to stop and free trace DMA
in the FW.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211102101019.14037-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|