summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-14drm: rcar-du: Enable VSP compositor by default on Gen3Laurent Pinchart
On Gen3 hardware the VSP compositor is required for display. Enable it by default in the kernel configuration. The option is kept user-configurable for testing purpose on Gen2 platforms. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2018-02-14drm: rcar-du: Calculate DPLLCR to be more small jitterKuninori Morimoto
In general, PLL has VCO (= Voltage controlled oscillator), one of the very important electronic feature called as "jitter" is related to this VCO. In academic generalism, VCO should be maximum to be more small jitter. In high frequency clock, jitter will be large impact. Thus, selecting Hi VCO is general theory. fin fvco fout fclkout in --> [1/M] --> |PD| -> [LPF] -> [VCO] -> [1/P] -+-> [1/FDPLL] -> out +-> | | | | | +-----------------[1/N]<-------------+ fclkout = fvco / P / FDPLL -- (1) In PD, it will loop until fin/M = fvco/P/N fvco = fin * P * N / M -- (2) (1) + (2) indicates fclkout = fin * N / M / FDPLL In this device, N = (n + 1), M = (m + 1), P = 2, FDPLL = (fdpll + 1). fclkout = fin * (n + 1) / (m + 1) / (fdpll + 1) This is the datasheet formula. One note here is that it should be 2kHz < fvco < 4096MHz To be smaller jitter, fvco should be maximum, in other words, N as large as possible, M as small as possible driver should select. Here, basically M=1. This patch do it. Reported-by: HIROSHI INOSE <hiroshi.inose.rb@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Small clarifications in comments, renamed finnm to fout] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-02-14drm: rcar-du: Use 1000 to avoid misunderstanding in rcar_du_dpll_divider()Kuninori Morimoto
It is difficult to understand its scale if number has many 0s. This patch uses "* 1000" to avoid it in rcar_du_dpll_divider(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2018-02-14drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structureLaurent Pinchart
Since commit 2fc4d838aaf2 ("drm: rcar: use generic code for managing zpos plane property") the rcar-du driver stores the plane zpos in the drm_plane_state structure. The commit however forgot to remove the zpos field from the rcar_du_vsp_plane_state structure. Remove it. Fixes: 2fc4d838aaf2 ("drm: rcar: use generic code for managing zpos plane property") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-02-14drm/i915: Fixup kerneldoc for intel_pm.cChris Wilson
drivers/gpu/drm/i915/intel_pm.c:750: warning: Function parameter or member 'fifo_size' not described in 'intel_calculate_wm' drivers/gpu/drm/i915/intel_pm.c:5900: warning: Function parameter or member 'crtc' not described in 'intel_update_watermarks' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180214140303.1561-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-02-14drm/i915: Fixup kerneldocChris Wilson
drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'dev_priv' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'limit' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:569: warning: Function parameter or member 'clock' not described in 'intel_PLL_is_valid' drivers/gpu/drm/i915/intel_display.c:4769: warning: Function parameter or member 'crtc_state' not described in 'skl_update_scaler_plane' drivers/gpu/drm/i915/intel_display.c:4769: warning: Excess function parameter 'state' description in 'skl_update_scaler_plane' drivers/gpu/drm/i915/intel_display.c:4967: warning: Function parameter or member 'new_crtc_state' not described in 'intel_post_enable_primary' drivers/gpu/drm/i915/intel_display.c:12650: warning: Function parameter or member 'new_state' not described in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/intel_display.c:12650: warning: Excess function parameter 'fb' description in 'intel_prepare_plane_fb' drivers/gpu/drm/i915/intel_display.c:12763: warning: Function parameter or member 'old_state' not described in 'intel_cleanup_plane_fb' drivers/gpu/drm/i915/intel_display.c:12763: warning: Excess function parameter 'fb' description in 'intel_cleanup_plane_fb' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214134922.28761-2-chris@chris-wilson.co.uk
2018-02-14drm/i915/atomic: Fixup kerneldocChris Wilson
drivers/gpu/drm/i915/intel_atomic.c:198: warning: Function parameter or member 'state' not described in 'intel_crtc_destroy_state' drivers/gpu/drm/i915/intel_atomic.c:222: warning: Function parameter or member 'intel_crtc' not described in 'intel_atomic_setup_scalers' drivers/gpu/drm/i915/intel_atomic.c:222: warning: Excess function parameter 'crtc' description in 'intel_atomic_setup_scalers' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180214134922.28761-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-02-14drm/i915: Fixup kerneldoc for intel_uc_fw_upload()Chris Wilson
Just a parameter name change that was lost to kerneldoc. drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Function parameter or member 'xfer' not described in 'intel_uc_fw_upload' drivers/gpu/drm/i915/intel_uc_fw.c:209: warning: Excess function parameter 'loader' description in 'intel_uc_fw_upload' v2: Add the Returns: Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214105332.30230-1-chris@chris-wilson.co.uk
2018-02-14drm/i915: Add missing kerneldoc parameters for huc_ucode_xferChris Wilson
During the recent upheaval to uc, the parameters to huc_ucode_xfer were changed, but the kerneldoc left behind. drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'huc_fw' not described in 'huc_ucode_xfer' drivers/gpu/drm/i915/intel_huc.c:128: warning: Function parameter or member 'vma' not described in 'huc_ucode_xfer' drivers/gpu/drm/i915/intel_huc.c:128: warning: Excess function parameter 'dev_priv' description in 'huc_ucode_xfer' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214104040.4532-1-chris@chris-wilson.co.uk
2018-02-14drm/i915/lvds: Fixup commentaryChris Wilson
Remove the kerneldoc markup applied to non-kerneldoc comments and convert the multiline comments to the canonical style. drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect' drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init' drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-4-chris@chris-wilson.co.uk
2018-02-14drm/i915/dvo: Fixup commentaryChris Wilson
Remove the kerneldoc markup applied to non-kerneldoc comments and convert the multiline comments to the canonical style. drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'connector' not described in 'intel_dvo_detect' drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member 'force' not described in 'intel_dvo_detect' drivers/gpu/drm/i915/intel_dvo.c:382: warning: Function parameter or member 'encoder' not described in 'intel_dvo_get_current_mode' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-3-chris@chris-wilson.co.uk
2018-02-14drm/i915/dvo: Remove incorrect kerneldoc markupsChris Wilson
Regular comments where being marked up for kerneldoc, but were not formatted properly. Remove the markup to remove the warnings. drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'dvo' not described in 'ivch_read' drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'addr' not described in 'ivch_read' drivers/gpu/drm/i915/dvo_ivch.c:192: warning: Function parameter or member 'data' not described in 'ivch_read' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-2-chris@chris-wilson.co.uk
2018-02-14drm/i915/crt: Remove obsolete kerneldoc-esque commentChris Wilson
The code describes what it is doing quite well; and that is now much more complex than what the old comment would let you believe. drivers/gpu/drm/i915/intel_crt.c:486: warning: Function parameter or member 'connector' not described in 'intel_crt_detect_hotplug' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214092909.27040-1-chris@chris-wilson.co.uk
2018-02-14drm/i915/panel: Split range scaling calculation for readiblityChris Wilson
Split the 64b multiplication from the division so that it doesn't sprawl across a couple of lines and use mul_u32_u32() instead of open-coding the 64b conversion. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-2-chris@chris-wilson.co.uk
2018-02-14drm/i915/panel: Add missing parameters to kerneldocChris Wilson
drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_min' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'source_max' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_min' not described in 'scale' drivers/gpu/drm/i915/intel_panel.c:409: warning: Function parameter or member 'target_max' not described in 'scale' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-1-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20180214091747.12753-2-chris@chris-wilson.co.uk
2018-02-14drm/i915/sdvo: Tidy up commentaryChris Wilson
Drop the kerneldoc markup from the non-kerneldoc comments and convert the multi-line comments to the canonical format. drivers/gpu/drm/i915/intel_sdvo.c:223: warning: Function parameter or member 'intel_sdvo' not described in 'intel_sdvo_write_sdvox' drivers/gpu/drm/i915/intel_sdvo.c:223: warning: Function parameter or member 'val' not described in 'intel_sdvo_write_sdvox' drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'intel_sdvo' not described in 'intel_sdvo_get_trained_inputs' drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'input_1' not described in 'intel_sdvo_get_trained_inputs' drivers/gpu/drm/i915/intel_sdvo.c:653: warning: Function parameter or member 'input_2' not described in 'intel_sdvo_get_trained_inputs' drivers/gpu/drm/i915/intel_sdvo.c:2311: warning: Function parameter or member 'dev_priv' not described in 'intel_sdvo_select_ddc_bus' drivers/gpu/drm/i915/intel_sdvo.c:2311: warning: Function parameter or member 'sdvo' not described in 'intel_sdvo_select_ddc_bus' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214090905.4747-1-chris@chris-wilson.co.uk
2018-02-14drm/i915/tv: Cleanup up obsolete commentsChris Wilson
The ages old kerneldoc-esque comments still refer to the original stubs and not the more complete functions. As they were only describing the external entry points (or at least thought themselves to be, they had drifted!), they don't provide any commentary for the code flow. drivers/gpu/drm/i915/intel_tv.c:379: warning: cannot understand function prototype: 'const struct tv_mode tv_modes[] = ' drivers/gpu/drm/i915/intel_tv.c:1133: warning: bad line: drivers/gpu/drm/i915/intel_tv.c:1140: warning: Function parameter or member 'intel_tv' not described in 'intel_tv_detect_type' drivers/gpu/drm/i915/intel_tv.c:1140: warning: Function parameter or member 'connector' not described in 'intel_tv_detect_type' drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'connector' not described in 'intel_tv_detect' drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'ctx' not described in 'intel_tv_detect' drivers/gpu/drm/i915/intel_tv.c:1272: warning: Function parameter or member 'force' not described in 'intel_tv_detect' drivers/gpu/drm/i915/intel_tv.c:1351: warning: Function parameter or member 'connector' not described in 'intel_tv_get_modes' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214085814.2565-1-chris@chris-wilson.co.uk
2018-02-14drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3Hans de Goede
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset. The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their INIT_OTP sequence, but the deassert must be done before calling intel_dsi_device_ready(), so that is too late. Simply doing the INIT_OTP sequence earlier is not enough to fix this, because the INIT_OTP sequence also sends various MIPI packets to the panel, which can only happen after calling intel_dsi_device_ready(). This commit fixes this by splitting the INIT_OTP sequence into everything before the first DSI packet and everything else, including the first DSI packet. The first part (everything before the first DSI packet) is then used as deassert sequence. Changed in v2: -Split the init OTP sequence into a deassert reset and the actual init OTP sequence, instead of calling it earlier and then having the first mipi_exec_send_packet() call call intel_dsi_device_ready(). Changes in v3: -Move the whole shebang to intel_bios.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880 References: https://bugs.freedesktop.org/show_bug.cgi?id=101205 Cc: Jan-Michael Brummer <jan.brummer@tabos.org> Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-3-hdegoede@redhat.com
2018-02-14drm/i915: Free memdup-ed DSI VBT data structures on driver_unloadHans de Goede
Make intel_bios_cleanup function free the DSI VBT data structures which are memdup-ed by parse_mipi_config() and parse_mipi_sequence(). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-2-hdegoede@redhat.com
2018-02-14drm/i915: Add intel_bios_cleanup() functionHans de Goede
Add an intel_bios_cleanup() function to act as counterpart of intel_bios_init() and move the cleanup of vbt related resources there, putting it in the same file as the allocation. Changed in v2: -While touching the code anyways, remove the unnecessary: if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-1-hdegoede@redhat.com
2018-02-14drm/i915: Update DRIVER_DATE to 20180214Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-14Documentation: bindings: add dt documentation for cdn DP controllerChris Zhong
This patch adds a binding that describes the cdn DP controller for rk3399. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [document the missing 3 reset-names] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180213143549.15197-1-enric.balletbo@collabora.com
2018-02-13drm/radeon: only enable swiotlb path when need v2Chunming Zhou
swiotlb expands our card accessing range, but its path always is slower than ttm pool allocation. So add condition to use it. v2: move a bit later Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com
2018-02-13drm/amdgpu: only enable swiotlb alloc when need v2Chunming Zhou
get the max io mapping address of system memory to see if it is over our card accessing range. v2: move checking later Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com
2018-02-13drm: add func to get max iomem address v2Chunming Zhou
it will be used to check if the driver needs swiotlb v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>) Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com
2018-02-13drm/i915: Handle RC6 counter wrapTvrtko Ursulin
We can implement limited RC6 counter wrap-around protection under the assumption that clients will be reading this value more frequently than the wrap period on a given platform. With the typical wrap-around period being ~90 minutes, even with the exception of Baytrail which wraps every 13 seconds, this sounds like a reasonable assumption. Implementation works by storing a 64-bit software copy of a hardware RC6 counter, along with the previous HW counter snapshot. This enables it to detect wrap is polled frequently enough and keep the software copy monotonically incrementing. v2: * Missed GEN6_GT_GFX_RC6_LOCKED when considering slot sizing and indexing. * Fixed off-by-one in wrap-around handling. (Chris Wilson) v3: * Simplify index checking by using unsigned int. (Chris Wilson) * Expand the comment to explain why indexing works. v4: * Use __int128 if supported. v5: * Use mul_u64_u32_div. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94852 Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v3 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180208160036.29919-1-tvrtko.ursulin@linux.intel.com Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-02-13drm/i915: Fix i915_gem_context.h headerTvrtko Ursulin
Header uses I915_NUM_ENGINES so needs to include i915.gem.h, and also it uses requests so we can forward declare struct drm_i915_gem_request. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180213141833.17012-1-tvrtko.ursulin@linux.intel.com
2018-02-13drm/i915: introduce INTEL_PCH_ID() and use itJani Nikula
Cleanup similar to INTEL_PCH_TYPE(). No functional changes. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/798893c24728a1c766cb21c57ae0943e5859c897.1517851783.git.jani.nikula@intel.com
2018-02-13drm/i915: have virtual PCH detection return a PCH idJani Nikula
Simplify intel_virt_detect_pch() by making it return a PCH id rather than returning the PCH type and setting PCH id for some PCHs. Map the PCH id to PCH type using the shared routine. This gives us sanity check on the supported combinations also in the virtualized setting. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/197cf635261a1c628371ffaaee90e8647493af4d.1517851783.git.jani.nikula@intel.com
2018-02-13drm/i915: abstract virtual PCH id detectionJani Nikula
Make the code slightly more pleasant to look at. No functional changes. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/38ee1ac06c6724e888679eb287af36c221bd399b.1517851783.git.jani.nikula@intel.com
2018-02-13drm/i915: abstract PCH type detection from PCH idJani Nikula
Make the logic in intel_detect_pch() easier to follow, and make the PCH id to type mapping reusable. No functional changes. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3bd4ffcd284cdbd4e8dc77ab02d97ded422e0c21.1517851783.git.jani.nikula@intel.com
2018-02-13drm/i915/selftests: Report setup errors for igt_partial_tilingChris Wilson
igt_partial_tiling managed to fail with an -EBUSY. This usually means a pin leak, but that should be impossible given the test setup. Add a couple of error messages to help identify the path that failed. References: https://bugs.freedesktop.org/show_bug.cgi?id=105073 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180213120940.21579-1-chris@chris-wilson.co.uk
2018-02-13drm/i915/icl: program mbus during pipe enableMahesh Kumar
This patch program default values of MBus credit during pipe enable. Changes Since V1: - Add WARN_ON (Paulo) - Remove TODO comment - Program 0 during pipe disable - Rebase Changes since V2: - We don't need to do anything when disabling the pipe Changes since V3 (from Paulo): - Remove WARN() that we'll never be able to trigger (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205172131.20255-1-paulo.r.zanoni@intel.com
2018-02-13drm/i915/icl: initialize MBus during display initMahesh Kumar
This patch initializes MBus during display initialization. Changes since V2 (from Paulo): - Don't forget to remove the WARN_ON(1) call. Changes since V1: - Rebase to use function like Macros Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-6-paulo.r.zanoni@intel.com
2018-02-13drm/i915/icl: Enable both DBuf slices during initMahesh Kumar
ICL has 2 slices of DBuf, enable both the slices during display init. Ideally we should only enable the second slice when needed in order to save power, but while we're not there yet, adopt the simpler solution to keep us bug-free. v2 (from Paulo): - Add the TODO comment. - Reorganize where things are defined. - Fix indentation. - Remove unnecessary POSTING_READ() calls. - Improve the commit message. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-5-paulo.r.zanoni@intel.com
2018-02-13drm/i915/icl: implement the display init/uninit sequencesPaulo Zanoni
This code is similar enough to the CNL code that I considered just adding ICL support to the CNL function, but I think it's still different enough, and having a function specific to ICL allows us to more easily adapt code in case the spec changes more later. We're still missing the power wells and the mbus code, so leave those pieces with a FIXME comment while they're not here yet. v2: Don't use _PICK, don't WARN_ON(1), don't forget the chicken bits. v3: Use _MMIO_PORT() (Ville). Reviewed-by: James Ausmus <james.ausmus@intel.com> (v2) Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-4-paulo.r.zanoni@intel.com
2018-02-13drm/i915/icl: add the main CDCLK functionsPaulo Zanoni
This commit adds the basic CDCLK functions, but it's still missing pieces of the display initialization sequence. v2: - Implement the voltage levels. - Rebase. v3: - Adjust to the new "bypass" clock (Imre). - Call intel_dump_cdclk_state() too. - Rename a variable to avoid confusion. - Simplify the DVFS part. v4: - Remove wrong bit definition (James). - Also drive-by fix the coding style for the register definition we touched. v5: - Comment style (checkpatch). Cc: James Ausmus <james.ausmus@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180206193346.18272-1-paulo.r.zanoni@intel.com
2018-02-13drm/i915/icl: add ICL support to cnl_set_procmon_ref_valuesPaulo Zanoni
On ICL we have two sets of registers: one for port A and another for port B. The set of port A registers is the same as the CNL registers. Since the procmon table on ICL is the same we want to reuse the CNL function. To do that we add a port argument and make CNL always call the function passing port A. This way, we'll be able to easily reuse the function on ICL when we add icl_display_core_init(). v2: Don't use _PICK() when you can use a ternary operator. v3: Don't use a ternary operation when you can use _MMIO_PORT (Ville). Add an extra comment about why we're passing PORT_A (James). Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205154046.11485-2-paulo.r.zanoni@intel.com
2018-02-12drm/i915: Fix incorrect commentDavid Weinehall
While the comment singles out Port A or B, the code says Port A or *D*. Looking at the history it seems that the comment was added after the code, so it seems likely that the code is correct, not the comment. CC: Jani Nikula <jani.nikula@intel.com> CC: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209130755.11893-1-david.weinehall@linux.intel.com
2018-02-12drm/i915: Replace open-coded memset_p()Chris Wilson
When initialising the page directories, we set the GTT entries and the tree to the scratch page. We have already replaced the DMA fill with memset64(), but we can similarly use memset_p() to set the pointer array. References: 4dd504f7d98a ("drm/i915: Use memset64() to prefill the GTT page") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180212133118.16443-1-chris@chris-wilson.co.uk
2018-02-12drm/i915: Don't query PCODE RC6VIDS on platforms not supporting itImre Deak
On BXT/GLK GEN6_PCODE_READ_RC6VIDS fails with MAILBOX_P24C_CC_ILLEGAL_CMD, so don't try to do the query on these platforms. Do it only on SNB, IVB and HSW, where we use this command anyway for RC6 enabling. Based on my tests the command also succeeds on all LLC platforms, but it's not clear if it's really supported on those (it returns 0 aka 245mv for all RC6 states everywhere except on SNB). BSpec lists the command as supported on SKL+ (see P24C_PCODE_MAILBOX_INTERFACE) but that's clearly incorrect, since on SKL/KBL the same command ID is used for SKL_PCODE_LOAD_HDCP_KEYS. Since the command fails on BXT/GLK, the BSpec command list is also incorrect for those platforms (see P_CR_P24C_PCODE_MAILBOX_INTERFACE_0_2_0_GTTMMADR). I filed a request to update that info in Bspec, but for now let's assume a minimal set of platforms where the command is supported. References: https://bugs.freedesktop.org/show_bug.cgi?id=103337 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180208174102.10240-1-imre.deak@intel.com
2018-02-12drm/etnaviv: remove the need for a gpu-subsystem DT nodeLucas Stach
The module autoloading can be triggered through the GPU core nodes and the necessary platform device for the DRM toplevel device will be instantiated on module init. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-12dt-bindings: etnaviv: add slave interface clockLucas Stach
Newer GPU cores added a new clock input, which allows to gate the slave (AHB) interface independently from other parts of the GPU. Add it to the supported clocks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org>
2018-02-12drm/etnaviv: use correct format specifier for size_tLucas Stach
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-02-12drm/etnaviv: replace hangcheck with scheduler timeoutLucas Stach
This replaces the etnaviv internal hangcheck logic with the job timeout handling provided by the DRM scheduler. This simplifies the driver further and allows to replay jobs after a GPU reset, so only minimal state is lost. This introduces a user-visible change in that we don't allow jobs to run indefinitely as long as they make progress anymore, as this introduces quality of service issues when multiple processes are using the GPU. Userspace is now responsible to flush jobs in a way that the finish in a reasonable time, where reasonable is currently defined as less than 500ms. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-02-12drm/etnaviv: lock BOs after all other submit work is doneLucas Stach
Populating objects, adding them to the GPU VM and patching/validating the command stream might take a lot of CPU time. There is no reason to hold all object reservations during that time. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-02-12drm/etnaviv: move dependency handling to schedulerLucas Stach
Move the fence dependency handling to the scheduler where it belongs. Jobs with unsignaled dependencies just get to sit in the scheduler queue without holding any locks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-02-12drm/etnaviv: hook up DRM GPU schedulerLucas Stach
This hooks in the DRM GPU scheduler. No improvement yet, as all the dependency handling is still done in etnaviv_gem_submit. This just replaces the actual GPU submit by passing through the scheduler. Allows to get rid of the retire worker, as this is now driven by the scheduler. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-02-12drm/etnaviv: track fences by IDR instead of seqnoLucas Stach
This moves away from using the internal seqno as the userspace fence reference. By moving to a generic ID, we can later replace the internal fence by something different than the etnaviv seqno fence. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-12drm/etnaviv: add missing major features field to debugfsLucas Stach
This can be useful when dealing with a new GPU core. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-14 20:02:30 +0000