| Age | Commit message (Collapse) | Author |
|---|
|
When readl_poll_timeout() timeout, we'd better directly use its return
value.
Before this patch:
[ 2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14
After this patch:
[ 2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prefer kcalloc() to kzalloc(array_size()) for allocating an array.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When dumping vlan options for a single net device we send the same
entries infinitely because user-space expects a 0 return at the end but
we keep returning skb->len and restarting the dump on retry. Fix it by
returning the value from br_vlan_dump_dev() if it completed or there was
an error. The only case that must return skb->len is when the dump was
incomplete and needs to continue (-EMSGSIZE).
Reported-by: Benjamin Poirier <bpoirier@nvidia.com>
Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following warning in mtk_star_emac.c if CONFIG_OF is not set:
drivers/net/ethernet/mediatek/mtk_star_emac.c:1559:34:
warning: unused variable 'mtk_star_of_match' [-Wunused-const-variable]
static const struct of_device_id mtk_star_of_match[] = {
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mohammad Athari Bin Ismail says:
====================
Fix PTP issue in stmmac
This patch series to fix PTP issue in stmmac related to:
1/ PTP clock source configuration during initialization.
2/ PTP initialization during resume from suspend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.
To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.
Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For Intel platform, it is required to configure PTP clock source prior PTP
initialization in MAC. So, need to move ptp_clk_freq_config execution from
stmmac_ptp_register() to stmmac_init_ptp().
Fixes: 76da35dc99af ("stmmac: intel: Add PSE and PCH PTP clock source selection")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tobias Waldekranz says:
====================
net/fsl: xgmac_mdio: Preamble suppression and custom MDC frequencies
The first patch removes the docs for a binding that has never been
supported by the driver as far as I can see. This is a bit of a
mystery to me, maybe Freescale/NXP had/has support for it in an
internal version?
We then start working on the xgmac_mdio driver, converting the driver
to exclusively use managed resources, thereby simplifying the error
paths. Suggested by Andrew.
Preamble suppression is then added, followed by MDC frequency
customization. Neither code will change any bits if the corresponding
dt properties are not specified, so as to not trample on any setup
done by the bootloader, which boards might have relied on up to now.
Finally, we document the new bindings.
Tested on a T1023 based board.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver now supports the standard "clock-frequency" and
"suppress-preamble" properties, do document them in the binding
description.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support the standard "clock-frequency" attribute to set the generated
MDC frequency. If not specified, the driver will leave the divisor
bits untouched.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support the standard "suppress-preamble" attribute to disable preamble
generation.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All of the resources used by this driver has managed interfaces, so
use them. Heed the warning in the comment before platform_get_resource
and use a bare devm_ioremap to allow for non-exclusive access to the
IO memory.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This property has never been supported by the driver. The kernel has
settled on "clock-frequency" as the standard name for this binding, so
once that is supported we will document that instead.
Fixes: 7f93c9d90f4d ("power/fsl: add MDIO dt binding for FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
clang static analysis reports this representative issue
mixer.c:1548:35: warning: Assigned value is garbage or undefined
ucontrol->value.integer.value[0] = val;
^ ~~~
The filter_error() macro allows errors to be ignored.
If errors can be ignored, initialize variables
so garbage will not be used.
Fixes: 48cc42973509 ("ALSA: usb-audio: Filter error from connector kctl ops, too")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220126182142.1184819-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit b75326c201242de9495ff98e5d5cff41d7fc0d9d.
This commit breaks Linux compatibility with USGv6 tests. The RFC this
commit was based on is actually an expired draft: no published RFC
currently allows the new behaviour it introduced.
Without full IETF endorsement, the flash renumbering scenario this
patch was supposed to enable is never going to work, as other IPv6
equipements on the same LAN will keep the 2 hours limit.
Fixes: b75326c20124 ("ipv6: Honor all IPv6 PIO Valid Lifetime values")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different netns has different requirement on the setting of min_adv_mss
sysctl which the advertised MSS will be never lower than.
Enable min_adv_mss to be configured per network namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
net: mvneta: use .mac_select_pcs()
This series converts mvneta to use the .mac_select_pcs() like eventually
everything else will be. mvneta is slightly more involved because we
need to rearrange the initialisation first to ensure everything required
is initialised prior to phylink_create() being called.
Tested locally on SolidRun Clearfog.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert mvneta to use the mac_select_interface rather than using
phylink_set_pcs(). The intention here is to unify the approach for
PCS and eventually remove phylink_set_pcs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Re-order the mvneta initialisation to move devm based resources and
easy setup earlier in the probe function. The primary reason for this
is to allow us to switch the driver to use phylink's mac_select_pcs()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Robert Hancock says:
====================
at803x fiber/SFP support
Add support for 1000Base-X fiber modes to the at803x PHY driver, as
well as support for connecting a downstream SFP cage.
Changes since v3:
-Renamed some constants with OHM suffix for clarity
Changes since v2:
-fixed tabs/spaces issue in one patch
Changes since v1:
-moved page selection to config_init so it is handled properly
after suspend/resume
-added explicit check for empty sfp_support bitmask
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for downstream SFP cages for AR8031 and AR8033. This is
primarily intended for fiber modules or direct-attach cables, however
copper modules which work in 1000Base-X mode may also function. Such
modules are allowed with a warning.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously this driver always forced the copper page to be selected,
however for AR8031 in 100Base-FX or 1000Base-X modes, the fiber page
needs to be selected. Set the appropriate mode based on the hardware
mode_cfg strap selection.
Enable the appropriate interrupt bits to detect fiber-side link up
or down events.
Update config_aneg and read_status methods to use the appropriate
Clause 37 calls when fiber mode is in use.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fix to select the copper page on AR8031 was being done in the probe
function rather than config_init, so it would not be redone after resume
from suspend. Move this to config_init so it is always redone when
needed.
Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg fixes from Bjorn Andersson:
"The cdev cleanup in the rpmsg_char driver was not performed properly,
resulting in unpredicable behaviour when the parent remote processor
is stopped with any of the cdevs open by a client.
Two patches transitions the implementation to use cdev_device_add()
and cdev_del_device(), to capture the relationship between the two
objects, and relocates the incorrectly placed cdev_del()"
* tag 'rpmsg-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev
rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc fix from Bjorn Andersson:
"The interaction between the various Qualcomm remoteproc drivers and
the Qualcomm 'QMP' driver (used to communicate with the
power-management hardware) was reworked in v5.17-rc1, but failed to
account for the new Kconfig dependency"
* tag 'rproc-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom: q6v5: fix service routines build errors
|
|
Use PTR_WD instead of PTR to avoid clashes with other parts.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The file now rightfully throws up a big warning that it should never be
included, so remove it from the header_check test.
Fixes: f23653fe6447 ("tty: Partially revert the removal of the Cyclades public API")
Cc: stable <stable@vger.kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: "Maciej W. Rozycki" <macro@embecosm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220127073304.42399-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Harry's e-mail address from Cascoda bounces, I have not found any
contributions from him since 2018 so let's drop the Maintainer entry
from the CA8210 driver and mark it Orphan.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Returning -1 does not indicate anything useful.
Use a standard and meaningful error code instead.
Fixes: a26c5fd7622d ("nl802154: add support for security layer")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. We then leak the skb
structure.
Free the skb structure upon error before returning.
Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Upon error the ieee802154_xmit_complete() helper is not called. Only
ieee802154_wake_queue() is called manually. In the Tx case we then leak
the skb structure.
Free the skb structure upon error before returning when appropriate.
As the 'is_tx = 0' cannot be moved in the complete handler because of a
possible race between the delay in switching to STATE_RX_AACK_ON and a
new interrupt, we introduce an intermediate 'was_tx' boolean just for
this purpose.
There is no Fixes tag applying here, many changes have been made on this
area and the issue kind of always existed.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
These periods are expressed in time units (microseconds) while 40 and 12
are the number of symbol durations these periods will last. We need to
multiply them both with phy->symbol_duration in order to get these
values in microseconds.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Drivers are expected to set the PHY current_channel and current_page
according to their default state. The hwsim driver is advertising being
configured on channel 13 by default but that is not reflected in its own
internal pib structure. In order to ensure that this driver consider the
current channel as being 13 internally, we at least need to set the
pib->channel field to 13.
Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[stefan@datenfreihafen.org: fixed assigment from page to channel]
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Remove unneeded variable and directly return 0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.
Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.
Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove two dead stubs, sk_msg_clear_meta() was never
used, use of xskq_cons_is_full() got replaced by
xsk_tx_writeable() in v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220126185412.2776254-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix how selftests determine relative offset of a function that is
uprobed. Previously, there was an assumption that uprobed function is
always in the first executable region, which is not always the case
(libbpf CI hits this case now). So get_base_addr() approach in isolation
doesn't work anymore. So teach get_uprobe_offset() to determine correct
memory mapping and calculate uprobe offset correctly.
While at it, I merged together two implementations of
get_uprobe_offset() helper, moving powerpc64-specific logic inside (had
to add extra {} block to avoid unused variable error for insn).
Also ensured that uprobed functions are never inlined, but are still
static (and thus local to each selftest), by using a no-op asm volatile
block internally. I didn't want to keep them global __weak, because some
tests use uprobe's ref counter offset (to test USDT-like logic) which is
not compatible with non-refcounted uprobe. So it's nicer to have each
test uprobe target local to the file and guaranteed to not be inlined or
skipped by the compiler (which can happen with static functions,
especially if compiling selftests with -O2).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220126193058.3390292-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
I forgot tcp had per netns tracking of timewait sockets,
and their sysctl to change the limit.
After 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()"),
whole struct net can be freed before last tw socket is freed.
We need to allocate a separate struct inet_timewait_death_row
object per netns.
tw_count becomes a refcount and gains associated debugging infrastructure.
BUG: KASAN: use-after-free in inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46
Read of size 8 at addr ffff88807d5f9f40 by task kworker/1:7/3690
CPU: 1 PID: 3690 Comm: kworker/1:7 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events pwq_unbound_release_workfn
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x67c/0xa30 kernel/time/timer.c:1734
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:lockdep_unregister_key+0x1c9/0x250 kernel/locking/lockdep.c:6328
Code: 00 00 00 48 89 ee e8 46 fd ff ff 4c 89 f7 e8 5e c9 ff ff e8 09 cc ff ff 9c 58 f6 c4 02 75 26 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c 41 5d 41 5e 41 5f e9 19 4a 08 00 0f 0b 5b 5d 41 5c 41 5d
RSP: 0018:ffffc90004077cb8 EFLAGS: 00000206
RAX: 0000000000000046 RBX: ffff88807b61b498 RCX: 0000000000000001
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888077027128 R08: 0000000000000001 R09: ffffffff8f1ea4fc
R10: fffffbfff1ff93ee R11: 000000000000af1e R12: 0000000000000246
R13: 0000000000000000 R14: ffffffff8ffc89b8 R15: ffffffff90157fb0
wq_unregister_lockdep kernel/workqueue.c:3508 [inline]
pwq_unbound_release_workfn+0x254/0x340 kernel/workqueue.c:3746
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Allocated by task 3635:
kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
__kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:470
kasan_slab_alloc include/linux/kasan.h:260 [inline]
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3230 [inline]
slab_alloc mm/slub.c:3238 [inline]
kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3243
kmem_cache_zalloc include/linux/slab.h:705 [inline]
net_alloc net/core/net_namespace.c:407 [inline]
copy_net_ns+0x125/0x760 net/core/net_namespace.c:462
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226
ksys_unshare+0x445/0x920 kernel/fork.c:3048
__do_sys_unshare kernel/fork.c:3119 [inline]
__se_sys_unshare kernel/fork.c:3117 [inline]
__x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88807d5f9a80
which belongs to the cache net_namespace of size 6528
The buggy address is located 1216 bytes inside of
6528-byte region [ffff88807d5f9a80, ffff88807d5fb400)
The buggy address belongs to the page:
page:ffffea0001f57e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d5f9a80 pfn:0x7d5f8
head:ffffea0001f57e00 order:3 compound_mapcount:0 compound_pincount:0
memcg:ffff888070023001
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffff888010dd4f48 ffffea0001404e08 ffff8880118fd000
raw: ffff88807d5f9a80 0000000000040002 00000001ffffffff ffff888070023001
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3634, ts 119694798460, free_ts 119693556950
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271
alloc_slab_page mm/slub.c:1799 [inline]
allocate_slab mm/slub.c:1944 [inline]
new_slab+0x28a/0x3b0 mm/slub.c:2004
___slab_alloc+0x87c/0xe90 mm/slub.c:3018
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105
slab_alloc_node mm/slub.c:3196 [inline]
slab_alloc mm/slub.c:3238 [inline]
kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3243
kmem_cache_zalloc include/linux/slab.h:705 [inline]
net_alloc net/core/net_namespace.c:407 [inline]
copy_net_ns+0x125/0x760 net/core/net_namespace.c:462
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226
ksys_unshare+0x445/0x920 kernel/fork.c:3048
__do_sys_unshare kernel/fork.c:3119 [inline]
__se_sys_unshare kernel/fork.c:3117 [inline]
__x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
skb_free_head net/core/skbuff.c:655 [inline]
skb_release_data+0x65d/0x790 net/core/skbuff.c:677
skb_release_all net/core/skbuff.c:742 [inline]
__kfree_skb net/core/skbuff.c:756 [inline]
consume_skb net/core/skbuff.c:914 [inline]
consume_skb+0xc2/0x160 net/core/skbuff.c:908
skb_free_datagram+0x1b/0x1f0 net/core/datagram.c:325
netlink_recvmsg+0x636/0xea0 net/netlink/af_netlink.c:1998
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
sock_recvmsg net/socket.c:962 [inline]
____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
___sys_recvmsg+0x127/0x200 net/socket.c:2674
__sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address:
ffff88807d5f9e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807d5f9e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88807d5f9f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88807d5f9f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88807d5fa000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220126180714.845362-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update comments to only use kdoc style comments, starting with '/**',
for kdoc.
Flagged by ./scripts/kernel-doc
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220126090803.5582-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leo Yan says:
====================
pid: Introduce helper task_is_in_root_ns()
This patch series introduces a helper function task_is_in_init_pid_ns()
to replace open code. The two patches are extracted from the original
series [1] for network subsystem.
As a plan, we can firstly land this patch set into kernel 5.18; there
have 5 patches are left out from original series [1], as a next step,
I will resend them for appropriate linux-next merging.
[1] https://lore.kernel.org/lkml/20211208083320.472503-1-leo.yan@linaro.org/
====================
Link: https://lore.kernel.org/r/20220126050427.605628-1-leo.yan@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch replaces open code with task_is_in_init_pid_ns() to check if
a task is in root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the kernel uses open code in multiple places to check if a
task is in the root PID namespace with the kind of format:
if (task_active_pid_ns(current) == &init_pid_ns)
do_something();
This patch creates a new helper function, task_is_in_init_pid_ns(), it
returns true if a passed task is in the root PID namespace, otherwise
returns false. So it will be used to replace open codes.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ability of setting mac address in DT for cortina ethernet driver.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220125210811.54350-1-clabbe@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In __pata_platform_probe(), devm_kzalloc() is assigned to ap->ops and
there is a dereference of it right after that, which could introduce a
NULL pointer dereference bug.
Fix this by adding a NULL check of ap->ops.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: f3d5e4f18dba ("ata: pata_of_platform: Allow to use 16-bit wide data transfer")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
|
|
When the ucount code was refactored to create get_ucount it was missed
that some of the contexts in which a rlimit is kept elevated can be
the only reference to the user/ucount in the system.
Ordinary ucount references exist in places that also have a reference
to the user namspace, but in POSIX message queues, the SysV shm code,
and the SIGPENDING code there is no independent user namespace
reference.
Inspection of the the user_namespace show no instance of circular
references between struct ucounts and the user_namespace. So
hold a reference from struct ucount to i's user_namespace to
resolve this problem.
Link: https://lore.kernel.org/lkml/YZV7Z+yXbsx9p3JN@fixkernel.com/
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Add a specific test for the reload issue fixed with
commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").
Add to set, then flush set content + restore without other add/remove in
the transaction.
On kernels before the fix, this test case fails:
net,mac with reload [FAIL]
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Cancel tracking for byteorder operation, otherwise selector + byteorder
operation is incorrectly reduced if source and destination registers are
the same.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Prior to commit fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff
creation helpers"), nft_reject_bridge did not assign to nskb->dev before
passing nskb on to br_forward(). The shared skbuff creation helpers
introduced in above commit do which seems to confuse br_forward() as
reject statements in prerouting hook won't emit a packet anymore.
Fix this by simply passing NULL instead of 'dev' to the helpers - they
use the pointer for just that assignment, nothing else.
Fixes: fa538f7cf05aa ("netfilter: nf_reject: add reject skbuff creation helpers")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a test that sends large udp packet (which is fragmented)
via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4'
and check that the datagram is received by peer.
On kernels without
commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")',
this will fail with:
cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty
-rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS
-rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF
ERROR: in and output file mismatch when checking udp with stateless nat
FAIL: nftables v1.0.0 (Fearless Fosdick #2)
On patched kernels, this will show:
PASS: IP statless for ns2-PFp89amx
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
