| Age | Commit message (Collapse) | Author |
|---|
|
Add missing description to the nostream_work of dwc3_ep. The work is
used by bulk multi-stream endpoints for a NoStream event to reinitiate
the stream if needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250120182219.30dcb3c6@canb.auug.org.au/
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/7cdeaa346d24907712aac533c1c5f90a03151189.1737500936.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit c141ecc3cecd7 ("of: Warn when of_property_read_bool() is
used on non-boolean properties") a warning is raised if this function
is used for property detection. of_property_present() is the correct
helper for this.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250120144251.580981-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
retries
The current implementation sets the wMaxPacketSize of bulk in/out
endpoints to 1024 bytes at the end of the f_midi_bind function. However,
in cases where there is a failure in the first midi bind attempt,
consider rebinding. This scenario may encounter an f_midi_bind issue due
to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024
bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX
FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS
speed only.
Here the term "rebind" in this context refers to attempting to bind the
MIDI function a second time in certain scenarios. The situations where
rebinding is considered include:
* When there is a failure in the first UDC write attempt, which may be
caused by other functions bind along with MIDI.
* Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to
MIDI,ADB.
This commit addresses this issue by resetting the wMaxPacketSize before
endpoint claim. And here there is no need to reset all values in the usb
endpoint descriptor structure, as all members except wMaxPacketSize and
bEndpointAddress have predefined values.
This ensures that restores the endpoint to its expected configuration,
and preventing conflicts with value of ep->maxpacket_limit. It also
aligns with the approach used in other function drivers, which treat
endpoint descriptors as if they were full speed before endpoint claim.
Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation")
Cc: stable@vger.kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The doc-comment for `struct atmel_qspi_pcal` had a typo in one of the
struct members' name, causing a warning with the `W=1` option.
Fixes: 5af42209a4d2 ("spi: atmel-quadspi: Add support for sama7g5 QSPI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501311707.Ltj0qXse-lkp@intel.com/
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250203151249.79876-2-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
atomic context
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdffb ("clocksource: Check per-CPU clock synchronization when marked unstable")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com
|
|
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6f71507415841d1a6d38118e5fa0eaf0caab9c17)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, intel_dp_dsc_max_src_input_bpc can return 0 for platforms not
supporting DSC, which could theoretically cause issues in clamp()
due to a low limit being greater than the high limit.
Instead, return the minimum bpc supported by the source to prevent
such issues.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtNfM399_=_ff81zeRJv=0+z7oFJfPGmJgTp6yrJmU+1w@mail.gmail.com/
Fixes: 160672b86b0d ("drm/i915/dp: Use clamp for pipe_bpp limits with DSC")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131041342.3086716-1-ankit.k.nautiyal@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a67221b5eb8d59fb7e1f0df3ef9945b6a0f32cca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we support Adaptive sync operation mode with dynamic frame
rate, but instead the operation mode with fixed rate is set.
This was initially set correctly in the earlier version of changes but
later got changed, while defining a macro for the same.
Fixes: a5bd5991cb8a ("drm/i915/display: Compute AS SDP parameters")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-4-mitulkumar.ajitkumar.golani@intel.com
(cherry picked from commit c5806862543ff6c2ad242409fcdf0667eac26dae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
After the context is unpinned the backing memory can also be unpinned,
so any accesses via the lrc_reg_state pointer can end up in unmapped
memory. To avoid that, make sure to only access that memory if the
context is pinned when printing its info.
v2: fix newline alignment
Fixes: 28ff6520a34d ("drm/i915/guc: Update GuC debugfs to support new GuC")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5bea40687c5cf2a33bf04e9110eb2e2b80222ef5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 35e1aacfe536d6e8d8d440cd7155366da2541ad4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When converting to folios the cleanup path of shmem_get_pages() was
missed. When a DMA remap fails and the max segment size is greater than
PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment
size. The cleanup code isn't properly using the folio apis and as a
result isn't handling compound pages correctly.
v2 -> v3:
(Ville) Just use shmem_sg_free_table() as-is in the failure path of
shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable
but it will be reset when it retries in shmem_sg_alloc_table().
v1 -> v2:
(Ville) Fixed locations where we were not clearing mapping unevictable.
Cc: stable@vger.kernel.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487
Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/
Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Signed-off-by: Brian Geffon <bgeffon@google.com>
Suggested-by: Tomasz Figa <tfiga@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127204332.336665-1-bgeffon@google.com
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 9e304a18630875352636ad52a3d2af47c3bde824)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b3ba)
2) busyness implementation always returns monotonically increasing
counters. (Ref: cf907f6d29421)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13366
Fixes: cf907f6d2942 ("i915/guc: Ensure busyness counter increases motonically")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123193839.2394694-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 431b742e2bfc9f6dd713f261629741980996d001)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use intel_encoder_is_hdmi function which was recently introduced to
see if encoder is HDMI or not.
--v2
-Add Fixes tag [Jani]
Fixes: 6a3691ca4799 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117041247.1084381-1-suraj.kandpal@intel.com
(cherry picked from commit 2499212e21601740ed7d5563563f39cf7e7d833a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When topology changes, before beginning a new HDCP authentication by
sending AKE_init message we need to first authenticate only the
repeater. Only after repeater authentication failure, it makes sense
to start a new HDCP authentication. Even though it made sense to not
enable HDCP directly from check_link and schedule it for later, repeater
authentication needs to be done immediately.
--v2
-Fix comment grammatical errors [Ankit]
Fixes: 47ef55a8b784 ("drm/i915/hdcp: Don't enable HDCP2.2 directly from check_link")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217083723.2883317-1-suraj.kandpal@intel.com
(cherry picked from commit 605a33e765890e4f1345315afc25268d4ae0fb7c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are two registers in the hardware, one, "Select PWM",
is per-port configuration enabling PWM function instead of GPIO.
The other one is "PWM Select" is per-PWM selector to configure
PWM itself. Original code uses abbreviation of the latter
to describe the former. Rename it to follow the datasheet.
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When regmap locking is disabled, debugfs is also disabled.
Enable locking for debug when CONFIG_DEBUG_PINCTRL is set.
Fixes: f71aba339a66 ("pinctrl: cy8c95x0: Use single I2C lock")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The checks for vrtual registers in the cy8c95x0_readable_register()
and cy8c95x0_writeable_register() are not aligned and broken.
Fix that by explicitly avoiding reserved registers to be accessed.
Fixes: 71e4001a0455 ("pinctrl: pinctrl-cy8c95x0: Fix regcache")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The range_max is inclusive, so we need to use the number of
the last accessible register address.
Fixes: 8670de9fae49 ("pinctrl: cy8c95x0: Use regmap ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Only look up the VBIOS mode during atomic_check if the display mode
changes. For page flips, the previous settings still apply. Avoids the
runtime overhead of looking up the VBIOS mode on each page flip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-17-tzimmermann@suse.de
|
|
The type struct ast_vbios_mode_info used to store information about
the color format and display mode. It has outlived its purpose. Inline
its fields into struct ast_crtc_state and replace all instances.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-16-tzimmermann@suse.de
|
|
Replace the large switch statement with a look-up table when selecting
the mode index. Makes the code easier to read. The table is sorted by
resolutions; if run-time overhead from traversal becomes significant,
binary search would be a possible optimization.
The mode index requires a refresh-rate index to be added or subtracted,
which still requires a minimal switch. In the original code, some of
the indices did not contain this computation. Those cases would have been
equivalent to adding 0, so they are now all subsumed in the switch's
default branch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
v3:
- explain the semantics of the new switch statement (Jocelyn)
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-15-tzimmermann@suse.de
|
|
ASTDP requires a mode index, depending on the resolution. Move the
look-up code from ast_dp_set_mode() into a separate helper. Inline
the rest of the function into its only caller. Rename the variable
names and register constants to match the programming manual.
As before, the mode-index lookup still happens during the update's
atomic commit. Right now, there's no way of doing it during the atomic
check. The lookup requires the VBIOS mode, which is not available at
the atomic check's invocation. At least warn now if the mode index
could not be found.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-14-tzimmermann@suse.de
|
|
The helper ast_get_vbios_mode_info() retrieves hardware-specific format
and display-mode information. Inline the function into its only caller.
While at it, also replace a use of struct drm_format_info.cpp with the
correct DRM 4CC codes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-13-tzimmermann@suse.de
|
|
Test DRM display modes against the list of modes supported by the
VBIOS. The helper will respect the supported-modes flags in struct
ast_device. Hence only DRM display modes supported by the VBIOS
will be reported; without the current duplication of this information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-12-tzimmermann@suse.de
|
|
Mode lines are independent from hardware Gen or TX chip, so hide all
VBIOS mode tables in ast_vbios.c.
Move the look-up code for VBIOS modes from ast_vbios_get_mode_info()
to ast_vbios_find_mode(). The new look-up function respects the
supported-mode flags in struct ast_device. For example, if a device
does not have struct ast_device.support_fullhd set, the helper does
not return a valid mode for 1920x1080. Taking the supported-mode flags
into account allows for making the VBIOS tables the single reference
for validating and setting display modes against hardware capabilities.
v2:
- replace mode switch with look-up table (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-11-tzimmermann@suse.de
|
|
VBIOS mode tables are terminated by an entry with a refresh rate of
0xff. The code is hard to read and fragile to use. Therefore create
an empty entry with AST_VBIOS_MODE_INVALID to terminate each mode list.
Stop at the invalid entry when searching for modes in the tables.
Instead of testing for refresh == 0xff, test with a helper function if
the mode's size and refresh have meaningful values.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-10-tzimmermann@suse.de
|
|
The ast driver looks up supplied display modes from an internal list of
display modes supported by the VBIOS.
Do not use the crtc_-prefixed display values from struct drm_display_mode
for looking up the VBIOS mode. The fields contain raw values that the
driver programs to hardware. They are affected by display settings like
double-scan or interlace.
Instead use the regular vdisplay and hdisplay fields for lookup. As the
programmed values can now differ from the values used for lookup, set
struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS
mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de
|
|
The ast driver matches DRM display modes against an internal list of
modes supported by the VBIOS. Matching H/V sync flags between modes is
preferred, but optional. If sync flags are not matching, the driver
would program the VBIOS settings to hardware and let the display handle
the difference.
DRM modes are generated from attached displays or standard mode lines.
Therefore differences to the VBIOS modes are not just cosmetical, but
signal possible incompatibility with the display hardware.
Hence make matching H/V sync flags mandatory. If the VBIOS does not
support a certain mode, we should report it as unsupported. Note that
the VBIOS mode tables all appear to refer to standard modes.
(If sync flags really make no difference to the VBIOS, the ast driver
shouldn't match them in the first place.)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-8-tzimmermann@suse.de
|
|
Detect support for 1920x1200 (WUXGA) in ast_detect_widescreen(). The
flag is cleared by default. The test logic has been taken from existing
code in ast_crtc_helper_mode_valid(). The code in that function is being
replaced by the new flag.
v2:
- move shared detection code into helper (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-7-tzimmermann@suse.de
|
|
Detect support for 1920x1080 (FullHD) in ast_detect_widescreen(). The
flag is cleared by default. The test logic has been taken from existing
code in ast_crtc_helper_mode_valid(). The code in that function is being
replaced by the new flag.
For Gen3, a new branch duplicates the Gen2 logic and adds a test for
AST2200. Gen2 adds a test for AST2100.
v2:
- use fullhd flag for setting max width/height
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-6-tzimmermann@suse.de
|
|
Testing for support of widescreen modes mixes up various hardware
Gens. First branch by hardware Gen, then do specific tests for each
Gen. By default, widesscreen support is disabled.
Later patches will add more specific tests for each Gen.
v2:
- move shared detection code into helper (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-5-tzimmermann@suse.de
|
|
The flag support_wide_screen in struct ast_device selects devices that
support resolutions of at least 1680x1050 (WSXGA+). Name it accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-4-tzimmermann@suse.de
|
|
Rename variables and register constants to align with the programming
manual. Add new constants where necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-3-tzimmermann@suse.de
|
|
The resolution 1152x864 has a ratio of 4:3 and is already handled
as such. Remove it from the list of widescreen resolutions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-2-tzimmermann@suse.de
|
|
For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
[ 1.914038][ T82] mmc0: mmc_select_hs400es failed, error -84
[ 1.914954][ T82] mmc0: error -84 whilst initialising MMC card
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250123092644.7359-1-andy-ld.lu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This reverts commit 941a7abd4666912b84ab209396fdb54b0dae685d.
This commit uses presence of device-tree properties vmmc-supply and
vqmmc-supply for deciding whether to enable a quirk affecting timing of
clock and data.
The intention was to address issues observed with eMMC and SD on AM62
platforms.
This new quirk is however also enabled for AM64 breaking microSD access
on the SolidRun HimmingBoard-T which is supported in-tree since v6.11,
causing a regression. During boot microSD initialization now fails with
the error below:
[ 2.008520] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
[ 2.115348] mmc1: error -110 whilst initialising SD card
The heuristics for enabling the quirk are clearly not correct as they
break at least one but potentially many existing boards.
Revert the change and restore original behaviour until a more
appropriate method of selecting the quirk is derived.
Fixes: 941a7abd4666 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Closes: https://lore.kernel.org/linux-mmc/a70fc9fc-186f-4165-a652-3de50733763a@solid-run.com/
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250127-am654-mmc-regression-v2-1-9bb39fb12810@solid-run.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Correct the fault handling for the AXP717 by changing the i2c write
from regmap_update_bits() to regmap_write_bits(). The update bits
function does not work properly on a RW1C register where we must
write a 1 back to an existing register to clear it.
Additionally, as part of this testing I confirmed the behavior of
errors reappearing, so remove comment about assumptions.
Fixes: 6625767049c2 ("power: supply: axp20x_battery: add support for AXP717")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250131231455.153447-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Since commit 6037802bbae8 ("power: supply: core: implement extension API")
there is the following ABBA deadlock (simplified) between the LED trigger
code and the power-supply code:
1) When registering a power-supply class device, power_supply_register()
calls led_trigger_register() from power_supply_create_triggers() in
a scoped_guard(rwsem_read, &psy->extensions_sem) context.
led_trigger_register() then in turn takes a LED subsystem lock.
So here we have the following locking order:
* Read-lock extensions_sem
* Lock LED subsystem lock(s)
2) When registering a LED class device, with its default trigger set
to a power-supply LED trigger (which has already been registered)
The LED class code calls power_supply_led_trigger_activate() when
setting up the default trigger. power_supply_led_trigger_activate()
calls power_supply_get_property() to determine the initial value of
to assign to the LED and that read-locks extensions_sem. So now we
have the following locking order:
* Lock LED subsystem lock(s)
* Read-lock extensions_sem
Fixing this is easy, there is no need to hold the extensions_sem when
calling power_supply_create_triggers() since all triggers are always
created rather then checking for the presence of certain attributes as
power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers()
out of the guard block to fix this.
Here is the lockdep report fixed by this change:
[ 31.249343] ======================================================
[ 31.249378] WARNING: possible circular locking dependency detected
[ 31.249413] 6.13.0-rc6+ #251 Tainted: G C E
[ 31.249440] ------------------------------------------------------
[ 31.249471] (udev-worker)/553 is trying to acquire lock:
[ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150
[ 31.249574]
but task is already holding lock:
[ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0
[ 31.249657]
which lock already depends on the new lock.
[ 31.249696]
the existing dependency chain (in reverse order) is:
[ 31.249735]
-> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}:
[ 31.249778] down_write+0x3b/0xd0
[ 31.249803] led_trigger_set_default+0x34/0xe0
[ 31.249833] led_classdev_register_ext+0x311/0x3a0
[ 31.249863] input_leds_connect+0x1dc/0x2a0
[ 31.249889] input_attach_handler.isra.0+0x75/0x90
[ 31.249921] input_register_device.cold+0xa1/0x150
[ 31.249955] hidinput_connect+0x8a2/0xb80
[ 31.249982] hid_connect+0x582/0x5c0
[ 31.250007] hid_hw_start+0x3f/0x60
[ 31.250030] hid_device_probe+0x122/0x1f0
[ 31.250053] really_probe+0xde/0x340
[ 31.250080] __driver_probe_device+0x78/0x110
[ 31.250105] driver_probe_device+0x1f/0xa0
[ 31.250132] __device_attach_driver+0x85/0x110
[ 31.250160] bus_for_each_drv+0x78/0xc0
[ 31.250184] __device_attach+0xb0/0x1b0
[ 31.250207] bus_probe_device+0x94/0xb0
[ 31.250230] device_add+0x64a/0x860
[ 31.250252] hid_add_device+0xe5/0x240
[ 31.250279] usbhid_probe+0x4dc/0x620
[ 31.250303] usb_probe_interface+0xe4/0x2a0
[ 31.250329] really_probe+0xde/0x340
[ 31.250353] __driver_probe_device+0x78/0x110
[ 31.250377] driver_probe_device+0x1f/0xa0
[ 31.250404] __device_attach_driver+0x85/0x110
[ 31.250431] bus_for_each_drv+0x78/0xc0
[ 31.250455] __device_attach+0xb0/0x1b0
[ 31.250478] bus_probe_device+0x94/0xb0
[ 31.250501] device_add+0x64a/0x860
[ 31.250523] usb_set_configuration+0x606/0x8a0
[ 31.250552] usb_generic_driver_probe+0x3e/0x60
[ 31.250579] usb_probe_device+0x3d/0x120
[ 31.250605] really_probe+0xde/0x340
[ 31.250629] __driver_probe_device+0x78/0x110
[ 31.250653] driver_probe_device+0x1f/0xa0
[ 31.250680] __device_attach_driver+0x85/0x110
[ 31.250707] bus_for_each_drv+0x78/0xc0
[ 31.250731] __device_attach+0xb0/0x1b0
[ 31.250753] bus_probe_device+0x94/0xb0
[ 31.250776] device_add+0x64a/0x860
[ 31.250798] usb_new_device.cold+0x141/0x38f
[ 31.250828] hub_event+0x1166/0x1980
[ 31.250854] process_one_work+0x20f/0x580
[ 31.250879] worker_thread+0x1d1/0x3b0
[ 31.250904] kthread+0xee/0x120
[ 31.250926] ret_from_fork+0x30/0x50
[ 31.250954] ret_from_fork_asm+0x1a/0x30
[ 31.250982]
-> #1 (triggers_list_lock){++++}-{4:4}:
[ 31.251022] down_write+0x3b/0xd0
[ 31.251045] led_trigger_register+0x40/0x1b0
[ 31.251074] power_supply_register_led_trigger+0x88/0x150
[ 31.251107] power_supply_create_triggers+0x55/0xe0
[ 31.251135] __power_supply_register.part.0+0x34e/0x4a0
[ 31.251164] devm_power_supply_register+0x70/0xc0
[ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery]
[ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c]
[ 31.251272] i2c_device_probe+0x125/0x2b0
[ 31.251299] really_probe+0xde/0x340
[ 31.251324] __driver_probe_device+0x78/0x110
[ 31.251348] driver_probe_device+0x1f/0xa0
[ 31.251375] __driver_attach+0xba/0x1c0
[ 31.251398] bus_for_each_dev+0x6b/0xb0
[ 31.251421] bus_add_driver+0x111/0x1f0
[ 31.251445] driver_register+0x6e/0xc0
[ 31.251470] i2c_register_driver+0x41/0xb0
[ 31.251498] do_one_initcall+0x5e/0x3a0
[ 31.251522] do_init_module+0x60/0x220
[ 31.251550] __do_sys_init_module+0x15f/0x190
[ 31.251575] do_syscall_64+0x93/0x180
[ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 31.251629]
-> #0 (&psy->extensions_sem){.+.+}-{4:4}:
[ 31.251668] __lock_acquire+0x13ce/0x21c0
[ 31.251694] lock_acquire+0xcf/0x2e0
[ 31.251719] down_read+0x3e/0x170
[ 31.251741] power_supply_get_property.part.0+0x22/0x150
[ 31.251774] power_supply_update_leds+0x8d/0x230
[ 31.251804] power_supply_led_trigger_activate+0x18/0x20
[ 31.251837] led_trigger_set+0x1fc/0x300
[ 31.251863] led_trigger_set_default+0x90/0xe0
[ 31.251892] led_classdev_register_ext+0x311/0x3a0
[ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor]
[ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x]
[ 31.252002] i2c_device_probe+0x125/0x2b0
[ 31.252027] really_probe+0xde/0x340
[ 31.252052] __driver_probe_device+0x78/0x110
[ 31.252076] driver_probe_device+0x1f/0xa0
[ 31.252103] __driver_attach+0xba/0x1c0
[ 31.252125] bus_for_each_dev+0x6b/0xb0
[ 31.252148] bus_add_driver+0x111/0x1f0
[ 31.252172] driver_register+0x6e/0xc0
[ 31.252197] i2c_register_driver+0x41/0xb0
[ 31.252225] do_one_initcall+0x5e/0x3a0
[ 31.252248] do_init_module+0x60/0x220
[ 31.252274] __do_sys_init_module+0x15f/0x190
[ 31.253986] do_syscall_64+0x93/0x180
[ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 31.257614]
other info that might help us debug this:
[ 31.257619] Chain exists of:
&psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock
[ 31.257630] Possible unsafe locking scenario:
[ 31.257632] CPU0 CPU1
[ 31.257633] ---- ----
[ 31.257634] lock(&led_cdev->trigger_lock);
[ 31.257637] lock(triggers_list_lock);
[ 31.257640] lock(&led_cdev->trigger_lock);
[ 31.257643] rlock(&psy->extensions_sem);
[ 31.257646]
*** DEADLOCK ***
[ 31.289433] 4 locks held by (udev-worker)/553:
[ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0
[ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0
[ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0
[ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0
Fixes: 6037802bbae8 ("power: supply: core: implement extension API")
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd9138 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When lizard mode is disabled, there were two issues:
1. Switching between gamepad mode and desktop mode still functioned, even
though desktop mode did not. This lead to the ability to "break" gamepad mode
by holding down the Options key even while lizard mode is disabled
2. If you were in desktop mode when lizard mode is disabled, you would
immediately enter this faulty mode.
This patch properly disables the ability to switch between gamepad mode and the
faulty desktop mode by holding the Options key, as well as effectively removing
the faulty mode by bypassing the early returns if lizard mode is disabled.
Reported-by: Eugeny Shcheglov <eugenyshcheglov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 4094871db1d6 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1d6 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit
38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit
9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF")
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c29 ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
A previous patch tried to fix this link failure:
x86_64-linux-ld: drivers/hid/hid-lenovo.o: in function `lenovo_raw_event':
hid-lenovo.c:(.text+0x22c): undefined reference to `platform_profile_cycle'
but got it wrong in three ways:
- the link failure still exists with CONFIG_ACPI_PLATFORM_PROFILE=m
when hid-lenovo is built-in
- There is no way to manually enable CONFIG_ACPI_PLATFORM_PROFILE, as
it is intended to be selected by its users.
Remove the broken #if check again and instead select the symbol like
the other users do. This requires adding a dependency on CONFIG_ACPI.
Fixes: 52e7d1f7c2fd ("HID: lenovo: Fix undefined platform_profile_cycle in ThinkPad X12 keyboard patch")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.
In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
power_supply_config psy_cfg was missing its initialiser, add it in.
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The cancel_delayed_work_sync() call was missed, causing a use-after-free
in corsair_void_remove().
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/all/SY8P300MB042106286A2536707D2FB736A1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Closes: https://lore.kernel.org/all/SY8P300MB0421872E0AE934C9616FA61EA1E42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Fixes: 6ea2a6fd3872 ("HID: corsair-void: Add Corsair Void headset family driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Recovery work doesn't need to be bound to any specific CPU, so move it
to unbound workqueue to improve execution time and system latency.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129125636.1047413-7-jacek.lawrynowicz@linux.intel.com
|
