| Age | Commit message (Collapse) | Author |
|---|
|
...and return -ENOTEMPTY to the front-end in this case, instead of
proceeding. Currently, nft takes care of checking for these cases
and not sending them to the kernel, but if we drop the set_overlap()
call in nft we can end up in situations like:
# nft add table t
# nft add set t s '{ type inet_service ; flags interval ; }'
# nft add element t s '{ 1 - 5 }'
# nft add element t s '{ 6 - 10 }'
# nft add element t s '{ 4 - 7 }'
# nft list set t s
table ip t {
set s {
type inet_service
flags interval
elements = { 1-3, 4-5, 6-7 }
}
}
This change has the primary purpose of making the behaviour
consistent with nft_set_pipapo, but is also functional to avoid
inconsistent behaviour if userspace sends overlapping elements for
any reason.
v2: When we meet the same key data in the tree, as start element while
inserting an end element, or as end element while inserting a start
element, actually check that the existing element is active, before
resetting the overlap flag (Pablo Neira Ayuso)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().
This gets especially useful in the next patch.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
insertion
...and return -ENOTEMPTY to the front-end on collision, -EEXIST if
an identical element already exists. Together with the previous patch,
element collision will now be returned to the user as -EEXIST.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
insertion
Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it
might indicate that a given element (including intervals) already exists as
such, or that the new element would clash with existing ones.
If identical elements already exist, the front-end is ignoring this without
returning error, in case NLM_F_EXCL is not set. However, if the new element
can't be inserted due an overlap, we should report this to the user.
To this purpose, allow set back-ends to return -ENOTEMPTY on collision with
existing elements, translate that to -EEXIST, and return that to userspace,
no matter if NLM_F_EXCL was set.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Start using the helpers that align buffer object user-space addresses and
buffer object vram addresses to huge page boundaries.
This is to improve the chances of allowing huge page-table entries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
|
|
Using huge page-table entries requires that the physical address of the
start of a buffer object is huge page size aligned.
Make a special version of the TTM range manager that accomplishes this,
but falls back to a smaller page size alignment (PUD->PMD, PMD->NORMAL)
to avoid eviction.
If other drivers want to use it in the future, it can be made a
TTM generic helper. Note that drivers can force eviction for a certain
alignment by assigning the TTM GPU alignment correspondingly.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
|
|
Unaligned virtual addresses makes it unlikely that huge page-table entries
can be used.
So align virtual buffer object address huge page boundaries to the
underlying physical address huge page boundaries taking buffer object
sizes into account to determine when it might be possible to use huge
page-table entries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
|
|
With vmwgfx dirty-tracking we need a specialized huge_fault
callback. Implement and hook it up.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
|
|
Support huge (PMD-size and PUD-size) page-table entries by providing a
huge_fault() callback.
We still support private mappings and write-notify by splitting the huge
page-table entries on write-access.
Note that for huge page-faults to occur, either the kernel needs to be
compiled with trans-huge-pages always enabled, or the kernel needs to be
compiled with trans-huge-pages enabled using madvise, and the user-space
app needs to call madvise() to enable trans-huge pages on a per-mapping
basis.
Furthermore huge page-faults will not succeed unless buffer objects and
user-space addresses are aligned on huge page size boundaries.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
|
|
For graphics drivers needing to modify the page-protection, add
huge page-table entries counterparts to vmf_insert_pfn_prot().
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The functions wp_huge_pmd() and wp_huge_pud() currently relies on the
huge_fault() callback to split huge page table entries if needed.
However for module users that requires export of the split_huge_xxx()
functionality which may be undesired. Instead split pre-existing huge
page-table entries on VM_FAULT_FALLBACK return.
We currently only do COW and write-notify on the PTE level, so if the
huge_fault() handler returns VM_FAULT_FALLBACK on wp faults,
split the huge pages and page-table entries. Also do this for huge PUDs
if there is no huge_fault() handler and the vma is not anonymous, similar
to how it's done for PMDs.
Note that fs/dax.c still does the splitting in the huge_fault() handler,
but as huge_fault() A follow-up patch can remove the dax.c split_huge_pmd()
if needed.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For VM_PFNMAP and VM_MIXEDMAP vmas that want to support transhuge pages
and -page table entries, introduce vma_is_special_huge() that takes the
same codepaths as vma_is_dax().
The use of "special" follows the definition in memory.c, vm_normal_page():
"Special" mappings do not wish to be associated with a "struct page"
(either it doesn't exist, or it exists but they don't want to touch it)
For PAGE_SIZE pages, "special" is determined per page table entry to be
able to deal with COW pages. But since we don't have huge COW pages,
we can classify a vma as either "special huge" or "normal huge".
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function is used by upcoming vma_is_special_huge() with which we want
to use a const vma argument. Since for vma_is_dax() the vma argument is
only dereferenced for reading, constify it.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
|
|
Goodbye KVM/arm
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
|
|
|
|
The pmi8994 is commonly found on MSM8996 based devices, such as the
Dragonboard 820c, where it supplies power to a number of LDOs on the
primary PMIC.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200324041424.518160-1-bjorn.andersson@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] as
before. Also, helper function __cpu_try_die() is introduced to be shared
by cpu_die() and ipi_cpu_crash_stop(). So it shouldn't introduce any
functional changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
|
|
This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops() in
the subsequent patches, to retireve the CPU operation by the given CPU
index. The usage of cpu_read_ops() and get_cpu_ops() are difficult to be
distinguished from their names.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
It's obvious we needn't declare the corresponding CPU operation when
CONFIG_ARM64_ACPI_PARKING_PROTOCOL is disabled, even it doesn't cause
any compiling warnings.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the textual binding documentation for the AIC (AC97/I2S
Controller) of Ingenic SoCs to a YAML schema, and add the new compatible
strings in the process.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306222931.39664-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before the JZ4770, the playback and capture sampling rates had to match.
The JZ4770 supports independent sampling rates for both.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-6-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The change of offset for the {rx,tx}_threshold fields in the conf
register predates the JZ4780, and was first introduced in the JZ4760.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'#sound-dai-cells' is required to properly interpret
the list of DAI specified in the 'sound-dai' property,
so add them to 'rockchip-i2s.yaml'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200324094149.6904-2-jbx6244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current dts files with 'i2s' nodes are manually verified.
In order to automate this process rockchip-i2s.txt
has to be converted to yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200324094149.6904-1-jbx6244@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sound/soc/codecs/wm8974.c:200:38: warning:
wm8974_aux_boost_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/wm8974.c:204:38: warning:
wm8974_mic_boost_controls defined but not used [-Wunused-const-variable=]
commit 8a123ee2a46d ("ASoC: WM8974 DAPM cleanups")
left behind this, remove them.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200324070615.16248-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we discard something that is present in the journal, we flush the
journal first, so that discarded blocks are not overwritten by the journal
content.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add an argument "allow_discards" that enables discard processing on
dm-integrity device. Discards are only allowed to devices using
internal hash.
When a block is discarded the integrity tag is filled with
DISCARD_FILLER (0xf6) bytes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Ingo Molnar:
"A handful of tooling fixes all across the map, no kernel changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers uapi: Update linux/in.h copy
perf probe: Do not depend on dwfl_module_addrsym()
perf probe: Fix to delete multiple probe event
perf parse-events: Fix reading of invalid memory in event parsing
perf python: Fix clang detection when using CC=clang-version
perf map: Fix off by one in strncpy() size argument
tools: Let O= makes handle a relative path with -C option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A build fix with certain Kconfig combinations"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Fix CONFIG_EFI=n build
|
|
Pull dmaengine fixes from Vinod Koul:
"Late fixes in dmaengine for v5.6:
- move .device_release missing log warning to debug
- couple of maintainer entries for HiSilicon and IADX drivers
- off-by-one fix for idxd driver
- documentation warning fixes
- TI k3 dma error handling fix"
* tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()'
MAINTAINERS: Add maintainer for HiSilicon DMA engine driver
dmaengine: idxd: fix off by one on cdev dwq refcount
MAINTAINERS: rectify the INTEL IADX DRIVER entry
dmaengine: move .device_release missing log warning to debug level
docs: dmaengine: provider.rst: get rid of some warnings
|
|
If the size of the underlying device changes, change the size of the
integrity device too.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
get_mode() is used to retrieve the active mode state. Settings-A
config is used during active state, whilst Settings-B is for
suspend. This means we only need to check the sleep field of each
buck and LDO as that field solely relates to Settings-A config.
This change is a clone of the get_mode() update which was committed
as part of:
- regulator: da9062: fix suspend_enable/disable preparation
[a72865f057820ea9f57597915da4b651d65eb92f]
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200324092516.60B5C3FB8D@swsrvapps-01.diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move code to a new function get_provided_data_sectors().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Following commits will make it possible to shrink or extend the device. If
the device was shrunk, we don't want to replay journal data pointing past
the end of the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since the commit 72deb455b5ec619ff043c30bc90025aa3de3cdda ("block:
remove CONFIG_LBDAF") sector_t is always defined as unsigned long
long.
Delete the needless type casts in printk and avoids some warnings if
DEBUG_PRINT is defined.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
According to the tas2562 datasheet,the bits[5:1] represents the amp_level value.
So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi <charlie.jh@kakaocorp.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200319140043.GA6688@jhbirdchoi-MS-7B79
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the user specifies tag size larger than HASH_MAX_DIGESTSIZE,
there's a crash in integrity_metadata().
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
zmd->nr_rnd_zones was increased twice by mistake. The other place it
is increased in dmz_init_zone() is the only one needed:
1131 zmd->nr_useable_zones++;
1132 if (dmz_is_rnd(zone)) {
1133 zmd->nr_rnd_zones++;
^^^
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
mt8173 VPU firmware has been moved to a sub-folder of
linux-firmware, so load vpu-fw from the new location first,
if it fails, then from the old one.
Signed-off-by: Rui Wang <gtk_ruiwang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.
Issue build log:
ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info
Cc: rdunlap@infradead.org
Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx)
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add path and co-maintainer entry for i.MX8MQ device tree bindings.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This enables h.264, MPEG-2, and VP8 decoding on the Hantro G1 on
i.MX8MQ, with post-processing support.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add devicetree binding documentation for the Hantro G1/G2 VPU on i.MX8MQ.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The initial physical address was one too low for the outputs.
E.g. if 1.0.0.0 was expected, then it was set to 0.0.0.0, and
2.0.0.0 became 1.0.0.0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Johan Korsnes <johan.korsnes@gmail.com>
Fixes: 4ee895e71abb ("media: vivid: reorder CEC allocation and control set-up")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The linux-rockchip mailing list is relevant for the
Hantro driver, given this support the VPU present
in Rockchip SoCs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Due to unknown reason, H6 needs larger intraprediction buffer for 4K
videos than other SoCs. This was discovered by playing 4096x2304 video,
which is maximum what H6 VPU is supposed to support.
Fixes: 03e612e701a6 ("media: cedrus: Fix H264 4k support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.
unreferenced object 0xffffffffa574d000 (size 4096):
comm "init", pid 1667, jiffies 4294894890 (age 307.168s)
hex dump (first 32 bytes):
8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00 .6..f...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000060e82407>] __kmalloc+0x2b4/0x340
[<00000000dd99488f>] mempool_kmalloc+0x18/0x20
[<000000002560172b>] mempool_init_node+0x98/0x118
[<000000006c3574d2>] mempool_init+0x14/0x20
[<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
[<000000000887261b>] verity_ctr+0x87c/0x8d0
[<000000002b1e1c62>] dm_table_add_target+0x174/0x348
[<000000002ad89eda>] table_load+0xe4/0x328
[<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
[<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
[<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
[<000000005361e2e8>] el0_svc_common+0xa0/0x158
[<000000001374818f>] el0_svc_handler+0x6c/0x88
[<000000003364e9f4>] el0_svc+0x8/0xc
[<000000009d84cec9>] 0xffffffffffffffff
Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If we write a superblock in writecache_flush, we don't need to set bit and
scan the bitmap for it - we can just write the superblock directly. Also,
we can set the flag REQ_FUA on the write bio, so that we don't need to
submit a flush bio afterwards.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If a block is stored in the cache for too long, it will now be
written to the underlying device and cleaned up.
Add a new option "max_age" that specifies the maximum age of a block
in milliseconds.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
