| Age | Commit message (Collapse) | Author |
|---|
|
I noticed typos and i fixed them.
Signed-off-by: Senhong Liu <liusenhong2022@email.szu.edu.cn>
Link: https://lore.kernel.org/r/20230819133345.39961-1-liusenhong2022@email.szu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Sync Realtek Regulatory R43 and Realtek Channel Plan R64.
1. add entry for XK (Kosovo)
2. change TH (Thailand) to Realtek regd world-wide
3. configures Realtek 6 GHz regd for below countries
* AR, MX, HT -> FCC
* LB, ZA, BF, LA, MN -> ETSI
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230815120253.9901-1-pkshih@realtek.com
|
|
The "buf" is skb->data that comes from the firmware. We want to print
"len" number of bytes. But there is a missing period so the "len"
variable is used for formatting (width) instead of limiting the output
(precision).
Fixes: cad2bd8a136c ("wifi: rtw89: support firmware log with formatted text")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/0700c7b9-bfd3-4aa6-82bf-5bf3c74644e1@moroto.mountain
|
|
For MAC_SYS_CTRL register, Bit[2] controls MAC_TX_EN and Bit[3]
controls MAC_RX_EN (Bit index starts from 0). Therefore, 0x08 is
the correct mask for RX.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB03150B571B67B896A504AC34BC0EA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
Use eth_broadcast_addr() to assign broadcast address instead
of memcpy().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230804090120.1332091-1-yangyingliang@huawei.com
|
|
Time Averaged SAR (TAS) tracks the amount of transmit power over a
period of time and adjusts the power accordingly. Two thresholds are
used to determine when to increase or reduce transmit power: Dynamic
Power Reduction (DPR) on/off. Compared to Static SAR, which has a
constant transmit power, TAS can improve the user experience or
range extension.
TAS can be enabled through BIOS, and the driver will evaluate
Realtek ACPI DSM with RTW89_ACPI_DSM_FUNC_TAS_EN to determine
whether TAS should be enabled.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230804053458.31492-1-pkshih@realtek.com
|
|
2GHz band
A few samples get bad performance on 2GHz band, so use proper IQK command
code and select another group to have wider range of calibration value.
Fixes: f2abe804e823 ("wifi: rtw89: 8852b: rfk: add IQK")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803110150.8457-1-pkshih@realtek.com
|
|
The current implementation seems to reinvent what `kstrtoul` already does
in terms of functionality and error handling. Remove uses of `simple_strtoul()`
in favor of `kstrtoul()`.
There is the following note at `lib/vsprintf.c:simple_strtoull()` which
further backs this change:
| * This function has caveats. Please use kstrtoull (or kstrtoul) instead.
And here, simple_str* are explicitly deprecated [3].
This patch also removes an instance of the deprecated `strncpy` which helps [2].
Compile tested only.
Link: https://lore.kernel.org/all/202308011602.3CC1C0244C@keescook/ [1]
Link: https://github.com/KSPP/linux/issues/90 [2]
Link: https://docs.kernel.org/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull [3]
Cc: linux-hardening@vger.kernel.org
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802-wifi-ipw2x00-refactor-v2-1-d33f765e9cd5@google.com
|
|
Recent rework moved block device closing out of sb->put_super() and into
sb->kill_sb() to avoid deadlocks as s_umount is held in put_super() and
blkdev_put() can end up taking s_umount again.
That means we need to move the removal of the superblock from @fs_supers
out of generic_shutdown_super() and into deactivate_locked_super() to
ensure that concurrent mounters don't fail to open block devices that
are still in use because blkdev_put() in sb->kill_sb() hasn't been
called yet.
We can now do this as we can make iterators through @fs_super and
@super_blocks wait without holding s_umount. Concurrent mounts will wait
until a dying superblock is fully dead so until sb->kill_sb() has been
called and SB_DEAD been set. Concurrent iterators can already discard
any SB_DYING superblock.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-4-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recent patches experiment with making it possible to allocate a new
superblock before opening the relevant block device. Naturally this has
intricate side-effects that we get to learn about while developing this.
Superblock allocators such as sget{_fc}() return with s_umount of the
new superblock held and lock ordering currently requires that block
level locks such as bdev_lock and open_mutex rank above s_umount.
Before aca740cecbe5 ("fs: open block device after superblock creation")
ordering was guaranteed to be correct as block devices were opened prior
to superblock allocation and thus s_umount wasn't held. But now s_umount
must be dropped before opening block devices to avoid locking
violations.
This has consequences. The main one being that iterators over
@super_blocks and @fs_supers that grab a temporary reference to the
superblock can now also grab s_umount before the caller has managed to
open block devices and called fill_super(). So whereas before such
iterators or concurrent mounts would have simply slept on s_umount until
SB_BORN was set or the superblock was discard due to initalization
failure they can now needlessly spin through sget{_fc}().
If the caller is sleeping on bdev_lock or open_mutex one caller waiting
on SB_BORN will always spin somewhere and potentially this can go on for
quite a while.
It should be possible to drop s_umount while allowing iterators to wait
on a nascent superblock to either be born or discarded. This patch
implements a wait_var_event() mechanism allowing iterators to sleep
until they are woken when the superblock is born or discarded.
This also allows us to avoid relooping through @fs_supers and
@super_blocks if a superblock isn't yet born or dying.
Link: aca740cecbe5 ("fs: open block device after superblock creation")
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
With that, make sure the PM ops are used only in CONFIG_PM_SLEEP=y
case by wrapping them in pm_sleep_ptr() macro.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230717172821.62827-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
efi_queue_work() is a macro that implements the non-trivial manipulation
of the EFI runtime workqueue and completion data structure, most of
which is generic, and could be shared between all the users of the
macro. So move it out of the macro and into a new helper function.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The current code that marshalls the EFI runtime call arguments to hand
them off to a async helper does so in a type unsafe and slightly messy
manner - everything is cast to void* except for some integral types that
are passed by reference and dereferenced on the receiver end.
Let's clean this up a bit, and record the arguments of each runtime
service invocation exactly as they are issued, in a manner that permits
the compiler to check the types of the arguments at both ends.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.
The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix comment typos around ' mwifiex_deaggr_sdio_pkt()'
and 'mwifiex_host_to_card_mp_aggr()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814142101.60308-2-dmantipov@yandex.ru
|
|
Remove unused and set but unused 'dfs_workqueue', 'dfs_work', and
'scan_channels' members of 'struct mwifiex_adapter', adjust users.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814142101.60308-1-dmantipov@yandex.ru
|
|
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
With that switch pm_ptr() to pm_sleep_ptr() as the above
mentioned callbacks are only used for system sleep.
The use of the pm_sleep_ptr() macro allows the compiler
to always see the dev_pm_ops structure and related functions,
while still allowing the unused code to be removed, without
the need for the __maybe_unused markings.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230717172821.62827-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230717172821.62827-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
_DEFINE_DEV_PM_OPS() helps to define PM operations for the system sleep
and/or runtime PM cases. Some of the existing users want to have _noirq()
variants to be set. For that purpose introduce a new helper which sets
up _noirq() callbacks to be assigned and struct dev_pm_ops be provided.
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add missed return in mwifiex_uap_queue_bridged_pkt() and
mwifiex_process_rx_packet().
Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810083911.3725248-1-pinkperfect2021@gmail.com
|
|
Use is_zero_ether_addr() instead of ether_addr_equal()
to check if the ethernet address is all zeros.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230808081023.2303423-1-ruanjinjie@huawei.com
|
|
In 'mwifiex_process_sta_txpd()' and 'mwifiex_process_uap_txpd()',
replace 'BUG_ON()' with runtime check, and move all these checks
to 'mwifiex_process_tx()'. This way, both callees may be converted
to 'void', and the caller may be simplified as well.
Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-5-dmantipov@yandex.ru
|
|
Return -1 on possible 'mwifiex_write_reg()' errors in
'mwifiex_init_sdio_ioport()', do not ignore the value
returned by the latter in 'mwifiex_init_sdio()' and
'mwifiex_sdio_up_dev()' as well.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-4-dmantipov@yandex.ru
|
|
Return -EINVAL on possible 'sscanf()' errors in
'mwifiex_regrdwr_write()' and 'mwifiex_rdeeprom_write()'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-3-dmantipov@yandex.ru
|
|
Drop unused fields 'status_code' of 'struct mwifiex_txinfo',
'dfs_chan_switch_timer', 'sleep_params' (including related data
type 'struct mwifiex_sleep_params') of 'struct mwifiex_adapter',
adjust related code.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-2-dmantipov@yandex.ru
|
|
Always free the zeroed page on return from 'mwifiex_histogram_read()'.
Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-1-dmantipov@yandex.ru
|
|
Only the arch_efi_call_virt() macro that some architectures override
needs to be a macro, given that it is variadic and encapsulates calls
via function pointers that have different prototypes.
The associated setup and teardown code are not special in this regard,
and don't need to be instantiated at each call site. So turn them into
ordinary C functions and move them out of line.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-8-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-7-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-6-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use helpers instead of the open coded dance to silence lockdep warnings.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-5-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and use sb_end_write() instead of open coded version.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This helper does not take a kiocb as input and we want to create a
common helper by that name that takes a kiocb as input.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert buf->page to a folio once instead of five times. There's only
one uptodate bit per folio, not per page, so we lose nothing here.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230821141541.2535953-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove a number of implicit calls to compound_head() and various calls
to compatibility functions. This is not sufficient to enable support
for large folios; generic_perform_write() must be converted first.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230821141322.2535459-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The ili9882t is a TDDI IC (Touch with Display Driver). The
datasheet specifies there should be 60ms between touch SDA
sleep and panel RESX. Doug's series[1] allows panels and
touchscreens to power on/off together, so we can add the 65 ms
delay in i2c_hid_core_suspend before panel_unprepare.
Because ili9882t touchscrgeen is a panel follower, and
needs to use vccio-supply instead of vcc33-supply, so set
it NULL to ili9882t_chip_data, then not use vcc33 regulator.
[1]: https://lore.kernel.org/all/20230727171750.633410-1-dianders@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20230802071947.1683318-3-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The ili9882t touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that ili9882t needs to use
vccio-supply instead of vcc33-supply. Doug's series[1] allows panels
and touchscreens to power on/off together, let's add a phandle for this.
[1]: https://lore.kernel.org/r/20230607215224.2067679-1-dianders@chromium.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230802071947.1683318-2-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
There is race issue when concurrently splice_read main trace_pipe and
per_cpu trace_pipes which will result in data read out being different
from what actually writen.
As suggested by Steven:
> I believe we should add a ref count to trace_pipe and the per_cpu
> trace_pipes, where if they are opened, nothing else can read it.
>
> Opening trace_pipe locks all per_cpu ref counts, if any of them are
> open, then the trace_pipe open will fail (and releases any ref counts
> it had taken).
>
> Opening a per_cpu trace_pipe will up the ref count for just that
> CPU buffer. This will allow multiple tasks to read different per_cpu
> trace_pipe files, but will prevent the main trace_pipe file from
> being opened.
But because we only need to know whether per_cpu trace_pipe is open or
not, using a cpumask instead of using ref count may be easier.
After this patch, users will find that:
- Main trace_pipe can be opened by only one user, and if it is
opened, all per_cpu trace_pipes cannot be opened;
- Per_cpu trace_pipes can be opened by multiple users, but each per_cpu
trace_pipe can only be opened by one user. And if one of them is
opened, main trace_pipe cannot be opened.
Link: https://lore.kernel.org/linux-trace-kernel/20230818022645.1948314-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Enable signed firmware loading for Vangogh platform using dmi quirks.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for signed firmware code bin and data bin
loading for amd platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add pci driver and platform driver to enable SOF support
on ACP5x architecture based Vangogh platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
anon_inode_getfile() never returns NULL pointer, it will return
ERR_PTR() when it fails, so replace the check with IS_ERR().
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://lore.kernel.org/r/20230819023716.3469037-1-yangyingliang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Encountered on an ARM Mali-T760 MP4, attempting to read the nvmem
variable can also return EOPNOTSUPP instead of ENOENT when speed
binning is unsupported.
Cc: <stable@vger.kernel.org>
Fixes: 7d690f936e9b ("drm/panfrost: Add basic support for speed binning")
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msyryd7y.fsf@gmail.com
|
|
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b9fb2c2 ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Commit 12e17243d8a1 ("of: base: improve error msg in
of_phandle_iterator_next()") added printing of the phandle value on
error, but failed to update the unittest.
Fixes: 12e17243d8a1 ("of: base: improve error msg in of_phandle_iterator_next()")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-1-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The error path of tas2781_hda_bind() needs to release PM refcount as
well. Modify the code flow to handle properly.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Closes: https://lore.kernel.org/r/9f910785-e856-1539-e3e4-c9817af5fe67@linux.intel.com
Link: https://lore.kernel.org/r/20230820172635.22236-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
