summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-08dt-bindings: usb: mtk-xhci: add support for mt7986Frank Wunderlich
Add compatible string for mt7986. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20221127114142.156573-3-linux@fw-web.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: dwc3: core: defer probe on ulpi_read_id timeoutFerry Toth
Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present"), Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon(). It appears to be caused by ulpi_read_id() masking the timeout on the first test write. In the past dwc3 probe continued by calling dwc3_core_soft_reset() followed by dwc3_get_extcon() which happend to return -EPROBE_DEFER. On deferred probe ulpi_read_id() finally succeeded. Due to above mentioned rearranging -EPROBE_DEFER is not returned and probe completes without phy. On Intel Merrifield the timeout on the first test write issue is reproducible but it is difficult to find the root cause. Using a mainline kernel and rootfs with buildroot ulpi_read_id() succeeds. As soon as adding ftrace / bootconfig to find out why, ulpi_read_id() fails and we can't analyze the flow. Using another rootfs ulpi_read_id() fails even without adding ftrace. We suspect the issue is some kind of timing / race, but merely retrying ulpi_read_id() does not resolve the issue. As we now changed ulpi_read_id() to return -ETIMEDOUT in this case, we need to handle the error by calling dwc3_core_soft_reset() and request -EPROBE_DEFER. On deferred probe ulpi_read_id() is retried and succeeds. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-3-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: ulpi: defer ulpi_register on ulpi_read_id timeoutFerry Toth
Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon(). It appears to be caused by ulpi_read_id() on the first test write failing with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via DT when the test write fails and returns 0 in that case, even if DT does not provide the phy. As a result usb probe completes without phy. Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write fails. The user should then handle it appropriately. A follow up patch will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub supportIcenowy Zheng
Genesys Logic GL850G is a 4-port USB 2.0 STT hub that has a reset pin to toggle and a 3.3V core supply exported (although an integrated LDO is available for powering it with 5V). Add the support for this hub, for controlling the reset pin and the core power supply. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20221206055228.306074-4-uwu@icenowy.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08dt-bindings: usb: Add binding for Genesys Logic GL850G hub controllerIcenowy Zheng
The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that features 4 downstream ports, an internal 5V-to-3.3V LDO regulator (can be bypassed) and an external reset pin. Add a device tree binding for its USB protocol part. The internal LDO is not covered by this and can just be modelled as a fixed regulator. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221206055228.306074-3-uwu@icenowy.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08dt-bindings: vendor-prefixes: add Genesys LogicIcenowy Zheng
Genesys Logic, Inc. is a manufacturer for interface chips, especially USB hubs. https://www.genesyslogic.com.tw/ Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221206055228.306074-2-uwu@icenowy.me Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()Yi Yang
In fotg210_udc_probe(), if devm_clk_get() or clk_prepare_enable() fails, 'fotg210' will not be freed, which will lead to a memory leak. Fix it by moving kfree() to a proper location. In addition，we can use "return -ENOMEM" instead of "goto err" to simplify the code. Fixes: 718a38d092ec ("fotg210-udc: Handle PCLK") Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20221202012126.246953-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: typec: tipd: Set mode of operation for USB Type-C connectorSven Peter
Forward the mode of operation to the typec subsystem such that it can configure the mux correctly. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20221128162304.80125-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: gadget: udc: drop obsolete dependencies on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20221125170444.36620123@endymion.delvare Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: musb: remove extra check in musb_gadget_vbus_drawIvaylo Dimitrov
The checks for musb->xceiv and musb->xceiv->set_power duplicate those in usb_phy_set_power(), so there is no need of them. Moreover, not calling usb_phy_set_power() results in usb_phy_set_charger_current() not being called, so current USB config max current is not propagated through USB charger framework and charger drivers may try to draw more current than allowed or possible. Fix that by removing those extra checks and calling usb_phy_set_power() directly. Tested on Motorola Droid4 and Nokia N900 Fixes: a9081a008f84 ("usb: phy: Add USB charger support") Cc: stable <stable@kernel.org> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: gadget: uvc: Prevent buffer overflow in setup handlerSzymon Heidrich
Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. Fixes: cdda479f15cd ("USB gadget: video class function driver") Cc: stable <stable@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_initMiaoqian Lin
of_icc_get() alloc resources for path handle, we should release it when not need anymore. Like the release in dwc3_qcom_interconnect_exit() function. Add icc_put() in error handling to fix this. Fixes: bea46b981515 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20221206081731.818107-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()Yang Yingliang
I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. Fixes: d016cbe4d7ac ("usb: typec: Support the WUSB3801 port controller") Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221203071027.3808308-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: storage: Add check for kcallocJiasheng Jiang
As kcalloc may return NULL pointer, the return value should be checked and return error if fails as same as the ones in alauda_read_map. Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08Merge tag 'usb-serial-6.2-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.2-rc1 Here are the USB-serial updates for 6.2-rc1, including: - B0 hangup support for cp210x - avoid requesting a zero DTE rate which could potentially confuse buggy firmware in XR devices Included are also some new device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: xr: avoid requesting zero DTE rate USB: serial: cp210x: add support for B0 hangup USB: serial: cp210x: add Kamstrup RF sniffer PIDs USB: serial: option: add Quectel EM05-G modem
2022-12-08USB: sisusbvga: use module_usb_driver()Jiri Slaby (SUSE)
Now, that we only do usb_register() and usb_sisusb_exit() in module_init() and module_exit() respectivelly, we can simply use module_usb_driver(). Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221208090749.28056-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08USB: sisusbvga: rename sisusb.c to sisusbvga.cJiri Slaby (SUSE)
As it's the only source for the sisusbvga module, there is no need for a 2-steps build. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221208090749.28056-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08USB: sisusbvga: remove console supportJiri Slaby (SUSE)
It was marked as BROKEN since commit 862ee699fefe (USB: sisusbvga: Make console support depend on BROKEN) 2 years ago. Since noone stepped up to fix it, remove it completely. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221208090749.28056-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02Merge tag 'usb-serial-6.1-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for 6.1-rc8 Here are two fixes for a division-by-zero issue in the Fintek drivers. All have been in linux-next with no reported issues. * tag 'usb-serial-6.1-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: f81534: fix division by zero on line-speed change USB: serial: f81232: fix division by zero on line-speed change
2022-11-30USB: serial: xr: avoid requesting zero DTE rateJohan Hovold
When the requested line speed is B0 (hangup) there is no need to use the current speed in the line-coding request. This specifically avoids requesting a zero DTE rate when the current speed is B0, which could potentially confuse buggy firmware. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-30USB: serial: f81534: fix division by zero on line-speed changeJohan Hovold
The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 3aacac02f385 ("USB: serial: f81534: add high baud rate support") Cc: stable@vger.kernel.org # 4.16 Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-30USB: serial: f81232: fix division by zero on line-speed changeJohan Hovold
The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 268ddb5e9b62 ("USB: serial: f81232: add high baud rate support") Cc: stable@vger.kernel.org # 5.2 Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-30xhci: remove unused stream_id parameter from xhci_handle_halted_endpoint()Mathias Nyman
The stream_id parameter is no longer used when handling halted endpoints. Remove it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: Prevent infinite loop in transaction errors recovery for streamsMathias Nyman
Make sure to also limit the amount of soft reset retries for transaction errors on streams in cases where the transaction error event doesn't point to any specific TRB. In these cases we don't know the TRB or stream ring, but we do know which endpoint had the error. To keep error counting simple and functional, move the current err_count from ring structure to endpoint structure. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: disable U3 suspended ports in S4 hibernate poweroff_late stageMathias Nyman
Disable U3 suspended ports in hibernate S4 poweroff_late for systems with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled. This reduces the number of self-powered usb devices from surviving in U3 suspended state into next reboot. Bootloader/firmware on these systems can't handle usb ports in U3, and will timeout, causing extra delay during reboot/restore from S4. Add pci_poweroff_late() callback to struct usb_hcd to get this done at the correct stage in hibernate. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: export two xhci_hub functions for xhci-pci module usageMathias Nyman
some Intel Alder Lake xHC hosts on ChromeOS platforms need special workarounds touching port registers at xHC pci host hibernate. Export xhci_port_state_to_neutral() and xhci_find_slot_id_by_port() so they can be called from xhci-pci.c and thus the xhci-pci module. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-NReka Norman
ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown"). The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16. Cc: stable@vger.kernel.org Signed-off-by: Reka Norman <rekanorman@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30xhci: print warning when HCE was setLongfang Liu
When HCE(Host Controller Error) is set, it means that the xhci hardware controller has an error at this time, but the current xhci driver software does not log this event. By adding an HCE event detection in the xhci interrupt processing interface, a warning log is output to the system, which is convenient for system device status tracking. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221130091944.2171610-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30Revert "i915: Move list_count() to list.h for broader use"Greg Kroah-Hartman
This reverts commit a9efc04cfd05690e91279f41c2325c46335c43ef as it breaks the build. Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30Revert "usb: gadget: hid: Convert to use list_count()"Greg Kroah-Hartman
This reverts commit 33f00f41d963c86176dba2f9faff9b428a542e60 as it breaks the build. Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30Revert "usb: gadget: udc: bcm63xx: Convert to use list_count()"Greg Kroah-Hartman
This reverts commit c2d9d02f7bf3c641f9b8e6c9f5de1e564cdeca69 as it breaks the build. Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30Revert "xhci: Convert to use list_count()"Greg Kroah-Hartman
This reverts commit b47ec9727f47d1dce4e8cbc9aef01c80b2332535 as it breaks the build. Link: https://lore.kernel.org/r/20221130131854.35b58b16@canb.auug.org.au Link: https://lore.kernel.org/r/202211301628.iwMjPVMp-lkp@intel.com Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-30USB: serial: cp210x: add support for B0 hangupJohan Hovold
A request to set the line speed to B0 is used to hang up a modem connection by deasserting the modem control lines. Note that there is no need reconfigure the line speed in hardware when B0 is requested (even if some drivers do set it to an arbitrary value for implementation or protocol reasons). Reviewed-by: Alex Henrie <alexh@vpitech.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2022-11-29usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_modeSven Peter
dwc->desired_dr_role is changed by dwc3_set_mode inside a spinlock but then read by __dwc3_set_mode outside of that lock. This can lead to a race condition when very quick successive role switch events happen: CPU A dwc3_set_mode(DWC3_GCTL_PRTCAP_HOST) // first role switch event spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_HOST spin_unlock_irqrestore(&dwc->lock, flags); queue_work(system_freezable_wq, &dwc->drd_work); CPU B __dwc3_set_mode // .... spin_lock_irqsave(&dwc->lock, flags); // desired_dr_role is DWC3_GCTL_PRTCAP_HOST dwc3_set_prtcap(dwc, dwc->desired_dr_role); spin_unlock_irqrestore(&dwc->lock, flags); CPU A dwc3_set_mode(DWC3_GCTL_PRTCAP_DEVICE) // second event spin_lock_irqsave(&dwc->lock, flags); dwc->desired_dr_role = mode; // DWC3_GCTL_PRTCAP_DEVICE spin_unlock_irqrestore(&dwc->lock, flags); CPU B (continues running __dwc3_set_mode) switch (dwc->desired_dr_role) { // DWC3_GCTL_PRTCAP_DEVICE // .... case DWC3_GCTL_PRTCAP_DEVICE: // .... ret = dwc3_gadget_init(dwc); We then have DWC3_GCTL.DWC3_GCTL_PRTCAPDIR = DWC3_GCTL_PRTCAP_HOST and dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST but initialized the controller in device mode. It's also possible to get into a state where both host and device are intialized at the same time. Fix this race by creating a local copy of desired_dr_role inside __dwc3_set_mode while holding dwc->lock. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20221128161526.79730-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29Merge tag 'thunderbolt-for-v6.2-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.2 merge window This includes following Thunderbolt/USB4 changes for the v6.2 merge window: - Add wake on connect/disconnect for USB4 ports - A couple of minor cleanups All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add wake on connect/disconnect on USB4 ports thunderbolt: ACPI: Use the helper fwnode_find_reference() thunderbolt: Remove redundant assignment to variable len thunderbolt: Use str_enabled_disabled() helper
2022-11-29xhci: Convert to use list_count()Andy Shevchenko
The list API now provides the list_count() to help with counting existing nodes in the list. Utilise it. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221123144901.40493-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: gadget: udc: bcm63xx: Convert to use list_count()Andy Shevchenko
The list API now provides the list_count() to help with counting existing nodes in the list. Utilise it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221123144901.40493-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: gadget: hid: Convert to use list_count()Andy Shevchenko
The list API now provides the list_count() to help with counting existing nodes in the list. Utilise it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221123144901.40493-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29i915: Move list_count() to list.h for broader useAndy Shevchenko
Some of the existing users, and definitely will be new ones, want to count existing nodes in the list. Provide a generic API for that by moving code from i915 to list.h. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221123144901.40493-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: gadget: f_hid: tidy error handling in hidg_allocJohn Keeping
Unify error handling at the end of the function, reducing the risk of missing something on one of the error paths. Moving the increment of opts->refcnt later means there is no need to decrement it on the error path and is safe as this is guarded by opts->lock which is held for this entire section. Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Lee Jones <lee@kernel.org> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20221122123523.3068034-4-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: gadget: f_hid: fix refcount leak on error pathJohn Keeping
When failing to allocate report_desc, opts->refcnt has already been incremented so it needs to be decremented to avoid leaving the options structure permanently locked. Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support") Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Lee Jones <lee@kernel.org> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: gadget: f_hid: fix f_hidg lifetime vs cdevJohn Keeping
The embedded struct cdev does not have its lifetime correctly tied to the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN is held open while the gadget is deleted. This can readily be replicated with libusbgx's example programs (for conciseness - operating directly via configfs is equivalent): gadget-hid exec 3<> /dev/hidg0 gadget-vid-pid-remove exec 3<&- Pull the existing device up in to struct f_hidg and make use of the cdev_device_{add,del}() helpers. This changes the lifetime of the device object to match struct f_hidg, but note that it is still added and deleted at the same time. Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver") Tested-by: Lee Jones <lee@kernel.org> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Lee Jones <lee@kernel.org> Signed-off-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29dt-bindings: usb: mtu3: add compatible for mt8186Allen-KH Cheng
Add a new compatible for mt8186 SoC. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Link: https://lore.kernel.org/r/20221123135531.23221-2-allen-kh.cheng@mediatek.com Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: misc: onboard_usb_hub: Drop obsolete dependency on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20221127155230.144886b7@endymion.delvare Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: cdnsp: fix lack of ZLP for ep0Pawel Laszczak
Patch implements the handling of ZLP for control transfer. To send the ZLP driver must prepare the extra TRB in TD with length set to zero and TRB type to TRB_NORMAL. The first TRB must have set TRB_CHAIN flag, TD_SIZE = 1 and TRB type to TRB_DATA. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20221122085138.332434-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: musb: Drop old unused am35x glue layerTony Lindgren
The am35x glue layer is no longer in use and can be dropped. There are no longer any SoCs passing platform data for it as they are booting using devicetree. In general, the am35x SoCs are similar to am335x and ti81xx and can use the musb_dsps glue layer as long as there is a proper phy driver available. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221125085506.38127-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29platform/chrome: cros_ec_typec: Set parent of partner PD objectPrashant Malani
In order to tell what Type-C device a PD object belongs to, its parent needs to be set. Use the Type-C partner USB PD registration wrapper to set the parent appropriately for PD objects which are created for connected Type-C partners. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20221122220538.2991775-3-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: typec: Add partner PD object wrapperPrashant Malani
Some port drivers may want to set a Type-C partner as a parent for a USB Power Delivery object, but the Type-C partner struct isn't exposed outside of the Type-C class driver. Add a wrapper to usb_power_delivery_register() which sets the provided Type-C partner as a parent to the USB PD object. This helps to avoid exposing the Type-C partner's device struct unnecessarily. Cc: Benson Leung <bleung@chromium.org> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20221122220538.2991775-2-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irqChunfeng Yun
Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released. Fixes: 04284eb74e0c ("usb: xhci-mtk: add support runtime PM") Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-29usb: add usb_set_intfdata() documentationVincent Mailhol
USB drivers do not need to call usb_set_intfdata(intf, NULL) in their usb_driver::disconnect callback because the core already does it in [1]. However, this fact is widely unknown, c.f.: $ git grep "usb_set_intfdata(.*NULL)" | wc -l 215 Especially, setting the interface to NULL before all action completed can result in a NULL pointer dereference. Not calling usb_set_intfdata() at all in disconnect() is the safest method. Add documentation to usb_set_intfdata() to clarify this point. Also remove the call in usb-skeletion's disconnect() not to confuse the new comers. [1] function usb_unbind_interface() from drivers/usb/core/driver.c Link: https://elixir.bootlin.com/linux/v6.0/source/drivers/usb/core/driver.c#L497 Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20221128102954.3615579-1-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-09 19:43:20 +0000