summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-07drm/radeon: add a delay after ATPX dGPU power offAlex Deucher
ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-07-07drm/radeon: clean up atpx power control handlingAlex Deucher
The presence of the power control method should be determined via the presence of the method in function 0. However, some sbioses only set the appropriate bits in function 1 so use then to override a missing power control function. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: disable power control on hybrid laptopsAlex Deucher
Windows 10 (and some 8.1) systems use standardized ACPI calls for hybrid laptops to control dGPU power. Detect those cases and disable the AMD specific ATPX power control. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/atpx: drop forcing of dGPU power controlAlex Deucher
Now that we handle this correctly, there is no need to force it. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: use PCI_D3hot for PX systems without dGPU power controlAlex Deucher
On PX systems without dGPU power control, use PCI_D3hot. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/atpx: add a query for ATPX dGPU power controlAlex Deucher
The runtime pm sequence is different depending on whether or not the platform supports ATPX dGPU power control. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add a delay after ATPX dGPU power offAlex Deucher
ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-07-07drm/amdgpu: clean up atpx power control handlingAlex Deucher
The presence of the power control method should be determined via the presence of the method in function 0. However, some sbioses only set the appropriate bits in function 1 so use then to override a missing power control function. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: disable power control on hybrid laptopsAlex Deucher
Windows 10 (and some 8.1) systems use standardized ACPI calls for hybrid laptops to control dGPU power. Detect those cases and disable the AMD specific ATPX power control. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: allow PACKET3_PFP_SYNC_ME on evergreenEdmondo Tommasina
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Edmondo Tommasina <edmondo.tommasina@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: Add serdes wait for idle in CGCG en/disableTom St Denis
Must wait for SERDES idle before exiting RLC SAFEMODE Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add mclk OD(overdrive) support for Polaris10Eric Huang
The maximum OD percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add mclk OD(overdrive) support for FijiEric Huang
The maximum OD percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add mclk OD(overdrive) support for TongaEric Huang
The maximum OD percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add mclk OD(overdrive) support for CIEric Huang
The maximum OD percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the common code to support mclk ODEric Huang
This implements mclk OverDrive(OD) through sysfs. The new entry pp_mclk_od is read/write. The value of input/output is an integer of the overclocking percentage. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add powercontainment module parameterHuang Rui
This patch makes powercontainment feature configurable. Currently, the powercontainment is not very stable, so add a module parameter to enable/disable it via user mode. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: fix and cleanup job destructionChristian König
Remove the job reference counting and just properly destroy it from a work item which blocks on any potential running timeout handler. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: move locking into the functions who need itChristian König
Otherwise the locking becomes rather confusing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: properly abstract scheduler timeout handlingChristian König
The driver shouldn't mess with the scheduler internals. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: remove use_shed hack in job cleanupChristian König
Remembering the code path in a variable to cleanup differently is usually not a good idea at all. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: fix coding style in amdgpu_job_freeChristian König
Ther should be a new line between code and decleration. Also use amdgpu_ib_free() instead of releasing the member manually. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: remove duplicated timeout callbackChristian König
No need for double housekeeping here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: remove begin_job/finish_jobChristian König
Completely pointless and confusing to use a callback to call into the same code file. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: fix coding style in the scheduler v2Christian König
v2: fix even more Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk.Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the CI code to enable sclk OD(OverDrive)Eric Huang
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the CI code to enable clock level selectionEric Huang
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the new common pm code to support sclk ODEric Huang
This extends OD (OverDrive) support to the non-Powerplay code paths. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add the new common pm code to select the clock levelsEric Huang
This extends dpm clock level selection to the non-powerplay code paths. This interface can be used to select individual clock levels. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: Enable GFX PG on CZTom St Denis
Based on Alex's patches this enables GFX PG on CZ. Tested with xonotic-glx/glxgears/supertuxkart and idle desktop. Also read-back registers via umr for verificiation that the bits are truly enabled. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: clean up polaris11 PG enableAlex Deucher
Fix the logic for enabling/disabling. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: add powergating support for CZ/STAlex Deucher
This implements powergating support for CZ/ST asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add new GFX powergating typesAlex Deucher
Add some new GFX powergating flags. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: rename some pg functionsAlex Deucher
So they can be shared with other asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx8: add state setup for CZ/ST GFX power gatingAlex Deucher
This sets up the CP jump table and GDS buffer and sets the PG state registers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon/gfx7: expand cp jt size to handle GDS as wellAlex Deucher
The size needs to handle the CP JT and GDS. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu/gfx7: expand cp jt size to handle GDS as wellAlex Deucher
The size needs to handle the CP JT and GDS. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on Polaris10Eric Huang
This implements sclk overdrive(OD) overclocking support for Polaris10, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on TongaEric Huang
This implements sclk overdrive(OD) overclocking support for Tonga, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amd/powerplay: add sclk OD support on FijiEric Huang
This implements sclk overdrive(OD) overclocking support for Fiji, and the maximum overdrive percentage is 20. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: add powerplay sclk OD support through sysfs (v2)Eric Huang
Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking, the entry is read/write, the value of input/output is an integer which is the over percentage of the highest sclk. v2: drop extra semicolon Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: load different smc firmware on some CI variantsAlex Deucher
The power tables on some variants require different firmware. This may fix stability issues on some newer CI parts. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91880 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/radeon: load different smc firmware on some SI variantsAlex Deucher
The power tables on some variants require different firmware. This may fix stability issues on some newer SI parts. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: load different smc firmware on some CI variantsAlex Deucher
The power tables on some variants require different firmware. This fixes stability issues on some newer CI parts. bug: https://bugs.freedesktop.org/show_bug.cgi?id=91880 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/amdgpu: clear RB at ring initMonk Liu
This help fix reloading driver hang issue of SDMA ring. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-07drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.Rodrigo Vivi
Some Kabylake SKUs are going to use Kabypoint PCH. It is mainly for Halo and DT ones. >From our specs it doesn't seem that KBP brings any change on the display south engine. So let's consider this as a continuation of SunrisePoint, i.e., SPT+. Since it is easy to get confused by a letter change: KBL = Kabylake - CPU/GPU codename. KBP = Kabypoint - PCH codename. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96826 Link: http://patchwork.freedesktop.org/patch/msgid/1467418032-15167-1-git-send-email-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2016-07-07drm/i915:gen9: implement WaMediaPoolStateCmdInWABBTim Gore
This patch applies WaMediaPoolStateCmdInWABB which fixes a problem with the restoration of thread counts on resuming from RC6. References: HSD#2137167 Signed-off-by: Tim Gore <tim.gore@intel.com> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com
2016-07-07drm/i915: Check for invalid cloning earlier during modesetVille Syrjälä
Move the encoder cloning check to happen earlier in the modeset. The main benefit will be that the debug output from a failed modeset will be less confusing as output_types can not indicate an invalid configuration during the later computation stages. For instance, what happened to me was kms_setmode was attempting one of its invalid cloning checks during which it asked for DP+VGA cloning on HSW. In this case the DP .compute_config() was executed after the FDI .compute_config() leaving the DP link clock (1.62 in this case) in port_clock, and then later the FDI BW computation tried to use that as the FDI link clock (which should always be 2.7). 1.62 x 2 wasn't enough for the mode it was trying to use, and so it ended up rejecting the modeset, not because of an invalid cloning configuration, but because of supposedly running out of FDI bandwidth. Took me a while to figure out what had actually happened. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-12-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Simplify hdmi_12bpc_possible()Ville Syrjälä
With the output_types bitmask there's no need to loop through the encoders anymore when checking for HDMI+non-HDMI cloning. v2: Use output_types bitmask v3: Fix the logic to really check that there are no non-HDMI encoders Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v2) Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-11-git-send-email-ville.syrjala@linux.intel.com
2016-07-07drm/i915: Kill has_dsi_encoderVille Syrjälä
has_dsi_encoder was introduced to indicate that the pipe is driving a DSI encoder. Now that we have the output_types bitmask that can tell us the same thing, let's just kill has_dsi_encoder. v2: Rebase, handle BXT DSI transcoder, rewrote commit message Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-10-git-send-email-ville.syrjala@linux.intel.com
generated by cgit (git 2.34.1) at 2025-09-11 17:45:53 +0000